/data/refman/pasoursint/CMSSW_6_1_2_SLHC4_patch1/src/GeneratorInterface/Pythia8Interface/src/EmissionVetoHook1.cc

Go to the documentation of this file.

#include "GeneratorInterface/Pythia8Interface/interface/EmissionVetoHook1.h"

#include "FWCore/ServiceRegistry/interface/Service.h"
void EmissionVetoHook1::fatalEmissionVeto(string message) {
  throw edm::Exception(edm::errors::Configuration,"Pythia8Interface")
    << "EmissionVeto: " << message << endl;
}

//--------------------------------------------------------------------------

// Routines to calculate the pT (according to pTdefMode) in a splitting:
//   ISR: i (radiator after)  -> j (emitted after) k (radiator before)
//   FSR: i (radiator before) -> j (emitted after) k (radiator after)
// For the Pythia pT definition, a recoiler (after) must be specified.

// Compute the Pythia pT separation. Based on pTLund function in History.cc
double EmissionVetoHook1::pTpythia(const Pythia8::Event &e, int RadAfterBranch,
                                   int EmtAfterBranch, int RecAfterBranch, bool FSR) {

  // Convenient shorthands for later
  Pythia8::Vec4 radVec = e[RadAfterBranch].p();
  Pythia8::Vec4 emtVec = e[EmtAfterBranch].p();
  Pythia8::Vec4 recVec = e[RecAfterBranch].p();
  int  radID  = e[RadAfterBranch].id();

  // Calculate virtuality of splitting
  double sign = (FSR) ? 1. : -1.;
  Pythia8::Vec4 Q(radVec + sign * emtVec); 
  double Qsq = sign * Q.m2Calc();

  // Mass term of radiator
  double m2Rad = (abs(radID) >= 4 && abs(radID) < 7) ?
                  Pythia8::pow2(particleDataPtr->m0(radID)) : 0.;

  // z values for FSR and ISR
  double z, pTnow;
  if (FSR) {
    // Construct 2 -> 3 variables
    Pythia8::Vec4 sum = radVec + recVec + emtVec;
    double m2Dip = sum.m2Calc();
    double x1 = 2. * (sum * radVec) / m2Dip;
    double x3 = 2. * (sum * emtVec) / m2Dip;
    z     = x1 / (x1 + x3);
    pTnow = z * (1. - z);

  } else {
    // Construct dipoles before/after splitting
    Pythia8::Vec4 qBR(radVec - emtVec + recVec);
    Pythia8::Vec4 qAR(radVec + recVec);
    z     = qBR.m2Calc() / qAR.m2Calc();
    pTnow = (1. - z);
  }

  // Virtuality with correct sign
  pTnow *= (Qsq - sign * m2Rad);

  // Can get negative pT for massive splittings
  if (pTnow < 0.) {
    cout << "Warning: pTpythia was negative" << endl;
    return -1.;
  }

#ifdef DBGOUTPUT
  cout << "pTpythia: rad = " << RadAfterBranch << ", emt = "
       << EmtAfterBranch << ", rec = " << RecAfterBranch
       << ", pTnow = " << sqrt(pTnow) << endl;
#endif

  // Return pT
  return sqrt(pTnow);
}

// Compute the POWHEG pT separation between i and j
double EmissionVetoHook1::pTpowheg(const Pythia8::Event &e, int i, int j, bool FSR) {

  // pT value for FSR and ISR
  double pTnow = 0.;
  if (FSR) {
    // POWHEG d_ij (in CM frame). Note that the incoming beams have not
    // been updated in the parton systems pointer yet (i.e. prior to any
    // potential recoil).
    int iInA = partonSystemsPtr->getInA(0);
    int iInB = partonSystemsPtr->getInB(0);
    double betaZ = - ( e[iInA].pz() + e[iInB].pz() ) /
                     ( e[iInA].e()  + e[iInB].e()  );
    Pythia8::Vec4 iVecBst(e[i].p()), jVecBst(e[j].p());
    iVecBst.bst(0., 0., betaZ);
    jVecBst.bst(0., 0., betaZ);
    pTnow = sqrt( (iVecBst + jVecBst).m2Calc() *
                  iVecBst.e() * jVecBst.e() /
                  Pythia8::pow2(iVecBst.e() + jVecBst.e()) );

  } else {
    // POWHEG pT_ISR is just kinematic pT
    pTnow = e[j].pT();
  }

  // Check result
  if (pTnow < 0.) {
    cout << "Warning: pTpowheg was negative" << endl;
    return -1.;
  }

#ifdef DBGOUTPUT
  cout << "pTpowheg: i = " << i << ", j = " << j
       << ", pTnow = " << pTnow << endl;
#endif

   return pTnow;
}

// Calculate pT for a splitting based on pTdefMode.
// If j is -1, all final-state partons are tried.
// If i, k, r and xSR are -1, then all incoming and outgoing 
// partons are tried.
// xSR set to 0 means ISR, while xSR set to 1 means FSR
double EmissionVetoHook1::pTcalc(const Pythia8::Event &e, int i, int j, int k, int r, int xSRin) {

  // Loop over ISR and FSR if necessary
  double pTemt = -1., pTnow;
  int xSR1 = (xSRin == -1) ? 0 : xSRin;
  int xSR2 = (xSRin == -1) ? 2 : xSRin + 1;
  for (int xSR = xSR1; xSR < xSR2; xSR++) {
    // FSR flag
    bool FSR = (xSR == 0) ? false : true;

    // If all necessary arguments have been given, then directly calculate.
    // POWHEG ISR and FSR, need i and j.
    if ((pTdefMode == 0 || pTdefMode == 1) && i > 0 && j > 0) {
      pTemt = pTpowheg(e, i, j, (pTdefMode == 0) ? false : FSR);

    // Pythia ISR, need i, j and r.
    } else if (!FSR && pTdefMode == 2 && i > 0 && j > 0 && r > 0) {
      pTemt = pTpythia(e, i, j, r, FSR);

    // Pythia FSR, need k, j and r.
    } else if (FSR && pTdefMode == 2 && j > 0 && k > 0 && r > 0) {
      pTemt = pTpythia(e, k, j, r, FSR);

    // Otherwise need to try all possible combintations.
    } else {
      // Start by finding incoming legs to the hard system after
      // branching (radiator after branching, i for ISR).
      // Use partonSystemsPtr to find incoming just prior to the
      // branching and track mothers.
      int iInA = partonSystemsPtr->getInA(0);
      int iInB = partonSystemsPtr->getInB(0);
      while (e[iInA].mother1() != 1) { iInA = e[iInA].mother1(); }
      while (e[iInB].mother1() != 2) { iInB = e[iInB].mother1(); }

      // If we do not have j, then try all final-state partons
      int jNow = (j > 0) ? j : 0;
      int jMax = (j > 0) ? j + 1 : e.size();
      for (; jNow < jMax; jNow++) {

        // Final-state and coloured jNow only
        if (!e[jNow].isFinal() || e[jNow].colType() == 0) continue;

        // POWHEG
        if (pTdefMode == 0 || pTdefMode == 1) {

          // ISR - only done once as just kinematical pT
          if (!FSR) {
            pTnow = pTpowheg(e, iInA, jNow, (pTdefMode == 0) ? false : FSR);
            if (pTnow > 0.) pTemt = (pTemt < 0) ? pTnow : min(pTemt, pTnow);
  
          // FSR - try all outgoing partons from system before branching 
          // as i. Note that for the hard system, there is no 
          // "before branching" information.
          } else {
    
            int outSize = partonSystemsPtr->sizeOut(0);
            for (int iMem = 0; iMem < outSize; iMem++) {
              int iNow = partonSystemsPtr->getOut(0, iMem);

              // Coloured only, i != jNow and no carbon copies
              if (iNow == jNow || e[iNow].colType() == 0) continue;
              if (jNow == e[iNow].daughter1() 
                  && jNow == e[iNow].daughter2()) continue;

              pTnow = pTpowheg(e, iNow, jNow, (pTdefMode == 0) 
                ? false : FSR);
              if (pTnow > 0.) pTemt = (pTemt < 0) 
                ? pTnow : min(pTemt, pTnow);
            } // for (iMem)
  
          } // if (!FSR)
  
        // Pythia
        } else if (pTdefMode == 2) {
  
          // ISR - other incoming as recoiler
          if (!FSR) {
            pTnow = pTpythia(e, iInA, jNow, iInB, FSR);
            if (pTnow > 0.) pTemt = (pTemt < 0) ? pTnow : min(pTemt, pTnow);
            pTnow = pTpythia(e, iInB, jNow, iInA, FSR);
            if (pTnow > 0.) pTemt = (pTemt < 0) ? pTnow : min(pTemt, pTnow);
  
          // FSR - try all final-state coloured partons as radiator
          //       after emission (k).
          } else {
            for (int kNow = 0; kNow < e.size(); kNow++) {
              if (kNow == jNow || !e[kNow].isFinal() ||
                  e[kNow].colType() == 0) continue;
  
              // For this kNow, need to have a recoiler.
              // Try two incoming.
              pTnow = pTpythia(e, kNow, jNow, iInA, FSR);
              if (pTnow > 0.) pTemt = (pTemt < 0) 
                ? pTnow : min(pTemt, pTnow);
              pTnow = pTpythia(e, kNow, jNow, iInB, FSR);
              if (pTnow > 0.) pTemt = (pTemt < 0) 
                ? pTnow : min(pTemt, pTnow);

              // Try all other outgoing.
              for (int rNow = 0; rNow < e.size(); rNow++) {
                if (rNow == kNow || rNow == jNow ||
                    !e[rNow].isFinal() || e[rNow].colType() == 0) continue;
                pTnow = pTpythia(e, kNow, jNow, rNow, FSR);
                if (pTnow > 0.) pTemt = (pTemt < 0) 
                  ? pTnow : min(pTemt, pTnow);
              } // for (rNow)
  
            } // for (kNow)
          } // if (!FSR)
        } // if (pTdefMode)
      } // for (j)
    }
  } // for (xSR)

#ifdef DBGOUTPUT
  cout << "pTcalc: i = " << i << ", j = " << j << ", k = " << k
       << ", r = " << r << ", xSR = " << xSRin
       << ", pTemt = " << pTemt << endl;
#endif

  return pTemt;
}

//--------------------------------------------------------------------------

// Extraction of pThard based on the incoming event.
// Assume that all the final-state particles are in a continuous block
// at the end of the event and the final entry is the POWHEG emission.
// If there is no POWHEG emission, then pThard is set to Qfac.

bool EmissionVetoHook1::doVetoMPIStep(int nMPI, const Pythia8::Event &e) {
  // Extra check on nMPI
  if (nMPI > 1) return false;

  // Find if there is a POWHEG emission. Go backwards through the
  // event record until there is a non-final particle. Also sum pT and
  // find pT_1 for possible MPI vetoing
  int count = 0, inonfinal = 0;
  double pT1 = 0., pTsum = 0.;
  for (int i = e.size() - 1; i > 0; i--) {
    inonfinal = i;
    if (e[i].isFinal()) {
      count++;
      pT1    = e[i].pT();
      pTsum += e[i].pT();
    } else break;
  }

  nFinal = nFinalExt;

  if (nFinal < 0) {      // nFinal is not specified from external, try to find out
    int first = -1, myid;
    int last = -1;
    for(int ip = 2; ip < e.size(); ip++) {
      myid = e[ip].id();
      if(abs(myid) < 6 || abs(myid) == 21) continue;
      first = ip;
      break;
    }
    if(first < 0) fatalEmissionVeto(string("signal particles not found"));
    for(int ip = first; ip < e.size(); ip++) {
      myid = e[ip].id();
      if(abs(myid) < 6 || abs(myid) == 21) continue;
      last = ip;
    }
    nFinal = last - inonfinal;
  }

  // Extra check that we have the correct final state
  if (count != nFinal && count != nFinal + 1)
    fatalEmissionVeto(string("Wrong number of final state particles in event"));

  // Flag if POWHEG radiation present and index
  bool isEmt = (count == nFinal) ? false : true;
  int  iEmt  = (isEmt) ? e.size() - 1 : -1;

  // If there is no radiation or if pThardMode is 0 then set pThard to Qfac.
  if (!isEmt || pThardMode == 0) {
    pThard = infoPtr->QFac();
      
  // If pThardMode is 1 then the pT of the POWHEG emission is checked against
  // all other incoming and outgoing partons, with the minimal value taken
  } else if (pThardMode == 1) {
    pThard = pTcalc(e, -1, iEmt, -1, -1, -1);

  // If pThardMode is 2, then the pT of all final-state partons is checked
  // against all other incoming and outgoing partons, with the minimal value
  // taken
  } else if (pThardMode == 2) {
    pThard = pTcalc(e, -1, -1, -1, -1, -1);

  }

  // Find MPI veto pT if necessary
  if (MPIvetoOn) {
    pTMPI = (isEmt) ? pTsum / 2. : pT1;
  }

  if(Verbosity)
    cout << "doVetoMPIStep: Qfac = " << infoPtr->QFac()
         << ", pThard = " << pThard << endl << endl;

  // Initialise other variables
  accepted   = false;
  nAcceptSeq = 0;

  // Do not veto the event
  return false;
}

//--------------------------------------------------------------------------

// ISR veto

bool EmissionVetoHook1::doVetoISREmission(int, const Pythia8::Event &e, int iSys) {
  // Must be radiation from the hard system
  if (iSys != 0) return false;

  // If we already have accepted 'vetoCount' emissions in a row, do nothing
  if (vetoOn && nAcceptSeq >= vetoCount) return false;

  // Pythia radiator after, emitted and recoiler after.
  int iRadAft = -1, iEmt = -1, iRecAft = -1;
  for (int i = e.size() - 1; i > 0; i--) {
    if      (iRadAft == -1 && e[i].status() == -41) iRadAft = i;
    else if (iEmt    == -1 && e[i].status() ==  43) iEmt    = i;
    else if (iRecAft == -1 && e[i].status() == -42) iRecAft = i;
    if (iRadAft != -1 && iEmt != -1 && iRecAft != -1) break;
  }
  if (iRadAft == -1 || iEmt == -1 || iRecAft == -1) {
    e.list();
    fatalEmissionVeto(string("Couldn't find Pythia ISR emission"));
  }

  // pTemtMode == 0: pT of emitted w.r.t. radiator
  // pTemtMode == 1: min(pT of emitted w.r.t. all incoming/outgoing)
  // pTemtMode == 2: min(pT of all outgoing w.r.t. all incoming/outgoing)
  int xSR      = (pTemtMode == 0) ? 0       : -1;
  int i        = (pTemtMode == 0) ? iRadAft : -1;
  int j        = (pTemtMode != 2) ? iEmt    : -1;
  int k        = -1;
  int r        = (pTemtMode == 0) ? iRecAft : -1;
  double pTemt = pTcalc(e, i, j, k, r, xSR);

#ifdef DBGOUTPUT
  cout << "doVetoISREmission: pTemt = " << pTemt << endl << endl;
#endif

  // Veto if pTemt > pThard
  if (pTemt > pThard) {
    nAcceptSeq = 0;
    nISRveto++;
    return true;
  }

  // Else mark that an emission has been accepted and continue
  nAcceptSeq++;
  accepted = true;
  return false;
}

//--------------------------------------------------------------------------

// FSR veto

bool EmissionVetoHook1::doVetoFSREmission(int, const Pythia8::Event &e, int iSys, bool) {
  // Must be radiation from the hard system
  if (iSys != 0) return false;

  // If we already have accepted 'vetoCount' emissions in a row, do nothing
  if (vetoOn && nAcceptSeq >= vetoCount) return false;

  // Pythia radiator (before and after), emitted and recoiler (after)
  int iRecAft = e.size() - 1;
  int iEmt    = e.size() - 2;
  int iRadAft = e.size() - 3;
  int iRadBef = e[iEmt].mother1();
  if ( (e[iRecAft].status() != 52 && e[iRecAft].status() != -53) ||
       e[iEmt].status() != 51 || e[iRadAft].status() != 51) {
    e.list();
    fatalEmissionVeto(string("Couldn't find Pythia FSR emission"));
  }

  // Behaviour based on pTemtMode:
  //  0 - pT of emitted w.r.t. radiator before
  //  1 - min(pT of emitted w.r.t. all incoming/outgoing)
  //  2 - min(pT of all outgoing w.r.t. all incoming/outgoing)
  int xSR = (pTemtMode == 0) ? 1       : -1;
  int i   = (pTemtMode == 0) ? iRadBef : -1;
  int k   = (pTemtMode == 0) ? iRadAft : -1;
  int r   = (pTemtMode == 0) ? iRecAft : -1;

  // When pTemtMode is 0 or 1, iEmt has been selected
  double pTemt = -1.;
  if (pTemtMode == 0 || pTemtMode == 1) {
    // Which parton is emitted, based on emittedMode:
    //  0 - Pythia definition of emitted
    //  1 - Pythia definition of radiated after emission
    //  2 - Random selection of emitted or radiated after emission
    //  3 - Try both emitted and radiated after emission
    int j = iRadAft;
    if (emittedMode == 0 || (emittedMode == 2 && rndmPtr->flat() < 0.5)) j++;

    for (int jLoop = 0; jLoop < 2; jLoop++) {
      if      (jLoop == 0) pTemt = pTcalc(e, i, j, k, r, xSR);
      else if (jLoop == 1) pTemt = min(pTemt, pTcalc(e, i, j, k, r, xSR));
  
      // For emittedMode == 3, have tried iRadAft, now try iEmt
      if (emittedMode != 3) break;
      if (k != -1) swap(j, k); else j = iEmt;
    }

  // If pTemtMode is 2, then try all final-state partons as emitted
  } else if (pTemtMode == 2) {
    pTemt = pTcalc(e, i, -1, k, r, xSR);

  }

#ifdef DBGOUTPUT
  cout << "doVetoFSREmission: pTemt = " << pTemt << endl << endl;
#endif

  // Veto if pTemt > pThard
  if (pTemt > pThard) {
    nAcceptSeq = 0;
    nFSRveto++;
    return true;
  }

  // Else mark that an emission has been accepted and continue
  nAcceptSeq++;
  accepted = true;
  return false;
}

//--------------------------------------------------------------------------

// MPI veto

bool EmissionVetoHook1::doVetoMPIEmission(int, const Pythia8::Event &e) {
  if (MPIvetoOn) {
    if (e[e.size() - 1].pT() > pTMPI) {
#ifdef DBGOUTPUT
      cout << "doVetoMPIEmission: pTnow = " << e[e.size() - 1].pT()
           << ", pTMPI = " << pTMPI << endl << endl;
#endif
      return true;
    }
  }
  return false;
}