/data/refman/pasoursint/CMSSW_6_1_2_SLHC2/src/L1Trigger/DTTrackFinder/src/L1MuDTEtaProcessor.cc

Go to the documentation of this file.

//-------------------------------------------------
//
//   Class: L1MuDTEtaProcessor
//
//   Description: Eta Processor
//
//                An Eta Processor consists of :
//                a receiver unit,
//                one Eta Track Finder (ETF) and 
//                one Eta Matching Unit (EMU) 
//
//   $Date: 2009/06/02 14:59:09 $
//   $Revision: 1.19 $
//
//   Author :
//   N. Neumeister            CERN EP
//   J. Troconiz              UAM Madrid
//
//--------------------------------------------------

//-----------------------
// This Class's Header --
//-----------------------

#include "L1Trigger/DTTrackFinder/src/L1MuDTEtaProcessor.h"

//---------------
// C++ Headers --
//---------------

#include <iostream>
#include <iomanip>
#include <bitset>

//-------------------------------
// Collaborating Class Headers --
//-------------------------------

#include "L1Trigger/DTTrackFinder/src/L1MuDTTFConfig.h"
#include "L1Trigger/DTTrackFinder/src/L1MuDTTrackSegEta.h"
#include "L1Trigger/DTTrackFinder/src/L1MuDTSecProcId.h"
#include "L1Trigger/DTTrackFinder/src/L1MuDTSectorProcessor.h"
#include "L1Trigger/DTTrackFinder/interface/L1MuDTTrackFinder.h"
#include "L1Trigger/DTTrackFinder/interface/L1MuDTTrack.h"
#include "CondFormats/L1TObjects/interface/L1MuDTEtaPattern.h"
#include "CondFormats/L1TObjects/interface/L1MuDTEtaPatternLut.h"
#include "CondFormats/DataRecord/interface/L1MuDTEtaPatternLutRcd.h"
#include "CondFormats/L1TObjects/interface/L1MuDTQualPatternLut.h"
#include "CondFormats/DataRecord/interface/L1MuDTQualPatternLutRcd.h"
#include "CondFormats/L1TObjects/interface/L1MuDTTFMasks.h"
#include "CondFormats/DataRecord/interface/L1MuDTTFMasksRcd.h"
#include "DataFormats/L1DTTrackFinder/interface/L1MuDTChambThDigi.h"
#include "DataFormats/L1DTTrackFinder/interface/L1MuDTChambThContainer.h"

using namespace std;

// --------------------------------
//       class L1MuDTEtaProcessor
//---------------------------------

//----------------
// Constructors --
//----------------

L1MuDTEtaProcessor::L1MuDTEtaProcessor(const L1MuDTTrackFinder& tf, int id) :
      m_tf(tf), m_epid(id), m_foundPattern(0), m_tseta(15) {

  m_tseta.reserve(15);
  
}


//--------------
// Destructor --
//--------------

L1MuDTEtaProcessor::~L1MuDTEtaProcessor() {}


//--------------
// Operations --
//--------------

//
// run Eta Processor
//
void L1MuDTEtaProcessor::run(int bx, const edm::Event& e, const edm::EventSetup& c) {

  if ( L1MuDTTFConfig::getEtaTF() ) {
    receiveData(bx,e,c);
    runEtaTrackFinder(c);
  }

  receiveAddresses();
  runEtaMatchingUnit(c);

  assign();

}


//
// reset Eta Processor
//
void L1MuDTEtaProcessor::reset() {

  vector<const L1MuDTTrackSegEta*>::iterator iter = m_tseta.begin();
  while ( iter != m_tseta.end() ) {
    if ( *iter ) {
      delete *iter;
      *iter = 0;
    }
    iter++;
  }

  m_tseta.clear();
  
  for ( int i = 0; i < 12; i++ ) {
    m_eta[i] = 99;
    m_fine[i] = false;
    m_pattern[i] = 0;
    m_address[i] = 0;
    m_TrackCand[i] = 0;
    m_TracKCand[i] = 0;
  }

  m_foundPattern.clear();

  m_mask = true;

} 


//
// print track candidates found in Eta Processor
//
void L1MuDTEtaProcessor::print() const {

  bool empty1 = true;
  for ( int i = 0; i < 15; i++ ) {
    empty1 &= ( m_tseta[i] == 0 || m_tseta[i]->empty() );
  }

  bool empty2 = true;
  for ( int i = 0; i < 12; i++ ) {  
    empty2 &= ( m_address[i] == 0 );
  }

  if ( !empty1 || !empty2 ) {
    cout << "Eta processor " << m_epid << " : " << endl;
  
   // print local pattern
   if ( !empty1 ) {
     cout << "Local pattern : " << endl;
     for ( int i = 0; i < 15; i++ ) {
       if ( (i+5)%5 == 0 ) cout << "station " << m_tseta[i]->station() << " : ";
       bitset<7> pos(m_tseta[i]->position());
       bitset<7> qua(m_tseta[i]->quality());
       for ( int j = 6; j >= 0; j-- ) {
         cout << pos[j]+qua[j];
       }
       cout << " ";
       if ( (i+1)%5 == 0 ) cout << endl;
     }
     cout << "Found patterns :" << endl;
     vector<int>::const_iterator iter;
     for ( iter = m_foundPattern.begin(); iter != m_foundPattern.end(); iter++ ) {
        const L1MuDTEtaPattern p = theEtaPatternLUT->getPattern(*iter);
        int qualitycode = p.quality();
        cout << "ID = " << setw(4) << p.id() << "  "
             << "eta = " << setw(3) << p.eta() << "  "
             << "quality = " << setw(2) << qualitycode << " ("
             << quality(qualitycode,1) << " "
             << quality(qualitycode,2) << " " 
             << quality(qualitycode,3) << ")";
        for ( int i = 0; i < 12; i++ ) { 
          if ( m_pattern[i] ==  p.id() ) cout << " <--";
        }
        cout << endl;     
      }
    }
    
    cout << "Received addresses : " << endl;
    for ( int i = 0; i < 12; i++ ) cout << setw(3) << m_address[i] << " ";
    cout << endl;
    
    if ( !empty1 ) {
      cout << "Matched patterns : " << endl;
      for ( int i = 0; i < 12; i++ ) {      
        if ( m_fine[i] ) {
          const L1MuDTEtaPattern p = theEtaPatternLUT->getPattern(m_pattern[i]);
          int fineeta = p.eta();
          int coarseeta = theQualPatternLUT->getCoarseEta(i/2+1,m_address[i]);
          cout << "Index = " << setw(2) << i << ", "
               << "address = " << setw(2) << m_address[i] << " --> " 
               << "pattern = " << setw(4) << m_pattern[i] << " "
               << "eta (coarse) = " << setw(3) << coarseeta << " "
               << "eta (fine) = " << setw(3) << fineeta << " "
               << "quality = " << setw(2) << p.quality() << endl;
        }
      }
    }

    cout << "Eta values and fine bits : " << endl;
    for ( int i = 0; i < 12; i++ ) cout << setw(3) << m_eta[i] << " ";
    cout << endl;
    for ( int i = 0; i < 12; i++ ) cout << setw(3) << m_fine[i] << " ";
    cout << endl;
  }

}


//
// receive data ( 15*3 DTBX eta trigger primitives )
//
void L1MuDTEtaProcessor::receiveData(int bx, const edm::Event& e, const edm::EventSetup& c) {

  c.get< L1MuDTTFMasksRcd >().get( msks );

  edm::Handle<L1MuDTChambThContainer> dttrig;
  e.getByLabel(L1MuDTTFConfig::getDTDigiInputTag(),dttrig);

  // const int bx_offset = dttrig->correctBX();
  int bx_offset=0;
  bx = bx + bx_offset;
  
  //
  // get 5*3 eta track segments
  //
  int sector = m_epid;
  for ( int stat = 1; stat <= 3; stat++ ) {
    for ( int wheel = -2; wheel <= 2; wheel++ ) {
      L1MuDTChambThDigi* tseta = dttrig->chThetaSegm(wheel,stat,sector,bx);
      bitset<7> pos;
      bitset<7> qual;

      int lwheel = wheel+1;
      if ( wheel < 0 ) lwheel = wheel-1;

      bool masked = false;
      if ( stat == 1 ) masked = msks->get_etsoc_chdis_st1(lwheel, sector);
      if ( stat == 2 ) masked = msks->get_etsoc_chdis_st2(lwheel, sector);
      if ( stat == 3 ) masked = msks->get_etsoc_chdis_st3(lwheel, sector);

      if ( !masked ) m_mask = false;

      if ( tseta && !masked ) {

        if ( wheel == -2 || wheel == -1 || 
             ( wheel == 0 && (sector == 0 || sector == 3 || sector == 4 || sector == 7 || sector == 8 || sector == 11) ) ) {
          for ( int i = 0; i < 7; i++ ) {
            if ( tseta->position(i) ) pos.set(6-i);
            if ( tseta->quality(i) ) qual.set(6-i);
          }
        } else {
          for ( int i = 0; i < 7; i++ ) {
            if ( tseta->position(i) ) pos.set(i);
            if ( tseta->quality(i) ) qual.set(i);
          }
        }
      }

      const L1MuDTTrackSegEta* tmpts = new L1MuDTTrackSegEta(wheel,sector,stat,pos.to_ulong(),qual.to_ulong(),bx-bx_offset);
      m_tseta.push_back(tmpts);
    } 
  }
  
}


//
// receive track addresses from 6 Sector Processors
//
void L1MuDTEtaProcessor::receiveAddresses() {

  // get track address code of all track segments
  // 6*2 times 5 bits; valid range [1-22]

  int sector = m_epid;
  
  int i = 0;
  for ( int wheel = -3; wheel <= 3; wheel++ ) {
    if ( wheel == 0 ) continue;
    L1MuDTSecProcId tmpspid(wheel,sector);
    for ( int number = 0; number < 2; number++ ) { 
      const L1MuDTTrack* cand = m_tf.sp(tmpspid)->track(number);
      const L1MuDTTrack* canD = m_tf.sp(tmpspid)->tracK(number);
      if ( cand ) {
        m_address[i] = cand->address().trackAddressCode();
        if ( !cand->empty() ) {
          m_TrackCand[i] = const_cast<L1MuDTTrack*>(cand);
          m_TracKCand[i] = const_cast<L1MuDTTrack*>(canD);
        }
        i++;
      }
    }
  }
  
}  


//
// run Eta Track Finder (ETF)
//
void L1MuDTEtaProcessor::runEtaTrackFinder(const edm::EventSetup& c) {

  c.get< L1MuDTEtaPatternLutRcd >().get( theEtaPatternLUT );

  // check if there are any data
  bool empty = true;
  for ( int i = 0; i < 15; i++ ) {
    empty &= m_tseta[i]->empty();
  }
  if ( empty ) return;

  // Pattern comparator: 
  // loop over all patterns and compare with local chamber pattern
  // result : list of valid pattern IDs ( m_foundPattern )
  L1MuDTEtaPatternLut::ETFLut_iter it = theEtaPatternLUT->begin();
  while ( it != theEtaPatternLUT->end() ) {
  
    const L1MuDTEtaPattern pattern = (*it).second;
    int qualitycode = pattern.quality();

    bool good = true;

    for ( int station = 0; station < 3; station++) {
      int q = quality(qualitycode,station+1);
      int wheel = pattern.wheel(station+1);
      int bin = pattern.position(station+1);
      if ( bin == 0 ) continue;
      bitset<7> pos  = m_tseta[wheel+2 + station*5]->position();
      bitset<7> qual = m_tseta[wheel+2 + station*5]->quality();
      // compare position
      good &= pos.test(bin-1);
      // compare quality
      if ( q == 2 ) good &= qual.test(bin-1);  
    }

    if ( good ) m_foundPattern.push_back(pattern.id());

    it++;
    
  }

}


//
// run Eta Matching Unit (EMU)
//
void L1MuDTEtaProcessor::runEtaMatchingUnit(const edm::EventSetup& c) {
  
  c.get< L1MuDTQualPatternLutRcd >().get( theQualPatternLUT );

  // loop over all addresses
  for ( int i = 0; i < 12; i++ ) {
  
    int adr = m_address[i];
    if ( adr == 0 ) continue;
    int sp = i/2 + 1;       //sector processor [1,6]
    
    // assign coarse eta value
    if ( !m_mask ) m_eta[i] = theQualPatternLUT->getCoarseEta(sp,adr);
    if ( m_eta[i] == 99 ) m_eta[i] = 32;
    if ( m_eta[i] > 31 ) m_eta[i] -= 64;
    m_eta[i] += 32;
    
    if ( m_foundPattern.empty() ) continue;
    
    // get list of qualified patterns ordered by quality 
    // and compare with found patterns
    const vector<short>& qualifiedPatterns = theQualPatternLUT->getQualifiedPatterns(sp,adr);
    vector<short>::const_iterator iter;
    vector<int>::const_iterator f_iter;
    for ( iter = qualifiedPatterns.begin(); iter != qualifiedPatterns.end(); iter++ ) {
      f_iter = find(m_foundPattern.begin(),m_foundPattern.end(),(*iter));
      // found
      if ( f_iter != m_foundPattern.end() ) {
        const L1MuDTEtaPattern p = theEtaPatternLUT->getPattern(*f_iter);
        // assign fine eta value     
        m_fine[i] = true;
        m_eta[i]  = p.eta();  // improved eta
        if ( m_eta[i] == 99 ) m_eta[i] = 32;
        if ( m_eta[i] > 31 ) m_eta[i] -= 64;
        m_eta[i] += 32;
        m_pattern[i] = (*f_iter);
        break;
      }
    }
    
  }
  
  // if both tracks from one sector processor deliver the same track address
  // both tracks get only a coarse eta value!  
  
  // loop over sector processors
  for ( int i = 0; i < 6; i++ ) {
    int idx1 = 2*i;
    int idx2 = 2*i+1;
    int adr1 = m_address[idx1];
    int adr2 = m_address[idx2];
    if ( adr1 == 0 || adr2 == 0 ) continue;
    if ( adr1 == adr2 && !m_mask ) {
      // both tracks get coarse (default) eta value
      m_eta[idx1]  = theQualPatternLUT->getCoarseEta(i+1,adr1);
      if ( m_eta[idx1] == 99 ) m_eta[idx1] = 32;
      if ( m_eta[idx1] > 31 ) m_eta[idx1] -= 64;
      m_eta[idx1] += 32;
      m_pattern[idx1] = 0;
      m_fine[idx1] = false; 
      m_eta[idx2]  = theQualPatternLUT->getCoarseEta(i+1,adr2);
      if ( m_eta[idx2] == 99 ) m_eta[idx2] = 32;
      if ( m_eta[idx2] > 31 ) m_eta[idx2] -= 64;
      m_eta[idx2] += 32;
      m_pattern[idx2] = 0;
      m_fine[idx2] = false; 
    }  
  }

}  


//
// assign values to track candidates
//
void L1MuDTEtaProcessor::assign() {

  for ( int i = 0; i < 12; i++ ) {
    if ( m_TrackCand[i] ) {
      if ( m_eta[i] != 99 ) { 
        m_TrackCand[i]->setEta(m_eta[i]);
        m_TracKCand[i]->setEta(m_eta[i]);
      }
      else {  
        //        if ( i/2 != 2 ) cerr << "L1MuDTEtaProcessor: assign invalid eta" << " " << m_address[i] << endl;
      }
      if ( m_fine[i] ) {
        m_TrackCand[i]->setFineEtaBit();
        m_TracKCand[i]->setFineEtaBit();
        // find all contributing track segments 
        const L1MuDTEtaPattern p = theEtaPatternLUT->getPattern(m_pattern[i]);
        vector<const L1MuDTTrackSegEta*> TSeta;
        const L1MuDTTrackSegEta* ts = 0;
        for ( int stat = 0; stat < 3; stat++ ) {
          int wh = p.wheel(stat+1);
          int pos = p.position(stat+1);
          if ( pos == 0 ) continue;
          ts = m_tseta[wh+2 + stat*5];
          TSeta.push_back(ts);
        }
        m_TrackCand[i]->setTSeta(TSeta);
        m_TracKCand[i]->setTSeta(TSeta);
      }  
    }
  }

}
  

//
// get quality:  id [0,26], stat [1,3]
//    
int L1MuDTEtaProcessor::quality(int id, int stat) {

  // quality codes as defined in CMS Note 2001/027
  // This QualityPatterns are used to have a defined Quality-Identifier for
  // all possible found tracks.
  // Therefore three integer numbers ( Station 1, 2, 3 from left to right )
  // can have numbers like 0, 1 or 2
  //    0 ... no hit is given
  //    1 ... a LTRG is given
  //    2 ... a HTRG is given

  const int qualcode[27][3] = { {0,0,0},{1,0,0},{0,1,0},{0,0,1},{2,0,0},
                                {0,2,0},{0,0,2},{1,1,0},{1,0,1},{0,1,1},
                                {2,1,0},{1,2,0},{2,0,1},{1,0,2},{0,2,1},
                                {0,1,2},{2,2,0},{2,0,2},{0,2,2},{1,1,1},
                                {2,1,1},{1,2,1},{1,1,2},{2,2,1},{2,1,2},
                                {1,2,2},{2,2,2} };

  return qualcode[id][stat-1];

}