|
|
|
#include <L1GtLogicParser.h>
Classes | |
| struct | OperandToken |
| struct | OperationRule |
| struct | TokenRPN |
Public Types | |
| enum | OperationType { OP_NULL = 1, OP_INVALID = 2, OP_AND = 4, OP_OR = 8, OP_NOT = 16, OP_OPERAND = 32, OP_OPENBRACKET = 64, OP_CLOSEBRACKET = 128 } |
| typedef std::vector< TokenRPN > | RpnVector |
Public Member Functions | |
| void | buildOperandTokenVector () |
| void | buildOperandTokenVectorNumExp () |
| bool | buildRpnVector (const std::string &) |
| build the rpn vector | |
| bool | checkLogicalExpression (std::string &) |
| check a logical expression for correctness - add/remove spaces if needed | |
| void | clearRpnVector () |
| clear possible old rpn vector | |
| void | convertIntToNameLogicalExpression (const std::map< int, std::string > &intToNameMap) |
| void | convertNameToIntLogicalExpression (const std::map< std::string, int > &nameToIntMap) |
| virtual const bool | expressionResult () const |
| virtual const bool | expressionResultNumExp () const |
| std::vector < L1GtLogicParser::OperandToken > | expressionSeedsOperandList () |
| L1GtLogicParser (const RpnVector &, const std::vector< OperandToken > &) | |
| L1GtLogicParser (std::string &logicalExpressionVal) | |
| L1GtLogicParser () | |
| constructor(s) | |
| L1GtLogicParser (const std::string logicalExpressionVal, const std::string numericalExpressionVal) | |
| from a logical and a numerical expression | |
| L1GtLogicParser (const std::string &logicalExpressionVal, const std::string &numericalExpressionVal, const bool dummy) | |
| L1GtLogicParser (const std::string &logicalExpressionVal) | |
| std::string | logicalExpression () const |
| return the logical expression | |
| std::string | numericalExpression () const |
| return the numerical expression | |
| int | operandIndex (const std::string &operandNameVal) const |
| return the position index of the operand in the logical expression | |
| std::string | operandName (const int iOperand) const |
| return the name of the (iOperand)th operand in the logical expression | |
| bool | operandResult (const std::string &operandNameVal) const |
| bool | operandResult (const int tokenNumberVal) const |
| bool | operandResultNumExp (const std::string &operandNameVal) const |
| bool | operandResultNumExp (const int iOperand) const |
| std::vector< OperandToken > & | operandTokenVector () |
| return the vector of operand tokens | |
| const std::vector< OperandToken > & | operandTokenVector () const |
| RpnVector | rpnVector () const |
| return the RPN vector | |
| virtual | ~L1GtLogicParser () |
| destructor | |
Protected Member Functions | |
| void | addBracketSpaces (const std::string &, std::string &) |
| add spaces before and after parantheses | |
| virtual OperationType | getOperation (const std::string &tokenString, OperationType lastOperation, TokenRPN &rpnToken) const |
| const OperationRule * | getRuleFromType (OperationType t) |
| get the rule entry to an operation type | |
| bool | setLogicalExpression (const std::string &) |
| set the logical expression - check for correctness the input string | |
| bool | setNumericalExpression (const std::string &) |
Protected Attributes | |
| std::string | m_logicalExpression |
| logical expression to be parsed | |
| std::string | m_numericalExpression |
| std::vector< OperandToken > | m_operandTokenVector |
| vector of operand tokens | |
| RpnVector | m_rpnVector |
| RPN vector - equivalent to the logical expression. | |
Static Protected Attributes | |
| static struct OperationRule | m_operationRules [] |
Description: parses a logical expression, with predefined operators.
Implementation: <TODO: enter implementation details>
$Date$ $Revision$
Description: see header file.
Implementation: <TODO: enter implementation details>
$Date$ $Revision$
Definition at line 33 of file L1GtLogicParser.h.
| typedef std::vector<TokenRPN> L1GtLogicParser::RpnVector |
Definition at line 62 of file L1GtLogicParser.h.
Definition at line 45 of file L1GtLogicParser.h.
{
OP_NULL=1,
OP_INVALID=2,
OP_AND=4,
OP_OR=8,
OP_NOT=16,
OP_OPERAND=32,
OP_OPENBRACKET=64,
OP_CLOSEBRACKET=128
};
| L1GtLogicParser::L1GtLogicParser | ( | ) |
constructor(s)
default constructor
Definition at line 39 of file L1GtLogicParser.cc.
{
// empty, default C++ initialization for string and vector are enough
}
| L1GtLogicParser::L1GtLogicParser | ( | const RpnVector & | rpnVec, |
| const std::vector< OperandToken > & | opTokenVector | ||
| ) |
from the RPN vector and the operand token vector no checks for consistency, empty logical and numerical expressions requires special care when used
Definition at line 48 of file L1GtLogicParser.cc.
References m_operandTokenVector, and m_rpnVector.
{
m_rpnVector = rpnVec;
m_operandTokenVector = opTokenVector;
}
| L1GtLogicParser::L1GtLogicParser | ( | const std::string & | logicalExpressionVal | ) |
from a constant logical expression numerical expression will be empty
Definition at line 59 of file L1GtLogicParser.cc.
References Exception, and setLogicalExpression().
{
// checks also for syntactic correctness of the logical expression
if ( !setLogicalExpression(logicalExpressionVal) ) {
// error(s) in logical expression - printed in the relevant place
throw cms::Exception("FailModule")
<< "\nError in parsing the logical expression = " << logicalExpressionVal
<< std::endl;
}
}
| L1GtLogicParser::L1GtLogicParser | ( | std::string & | logicalExpressionVal | ) |
Definition at line 77 of file L1GtLogicParser.cc.
References addBracketSpaces(), buildOperandTokenVector(), buildRpnVector(), Exception, m_logicalExpression, and AlCaHLTBitMon_QueryRunRegistry::string.
{
// checks also for syntactic correctness of the logical expression
// add spaces around brackets
std::string logicalExpressionBS;
addBracketSpaces(logicalExpressionVal, logicalExpressionBS);
// trim leading or trailing spaces
boost::trim(logicalExpressionBS);
if ( !buildRpnVector(logicalExpressionBS) ) {
// error(s) in logical expression
throw cms::Exception("FailModule")
<< "\nError in parsing the logical expression = " << logicalExpressionVal
<< std::endl;
}
//LogDebug("L1GtLogicParser")
// << "\nInitial logical expression = '" << logicalExpressionVal << "'"
// << "\nFinal logical expression = '" << logicalExpressionBS << "'\n"
// << std::endl;
logicalExpressionVal = logicalExpressionBS;
m_logicalExpression = logicalExpressionVal;
// build operand token vector
// dummy tokenNumber; tokenResult false
buildOperandTokenVector();
}
| L1GtLogicParser::L1GtLogicParser | ( | const std::string | logicalExpressionVal, |
| const std::string | numericalExpressionVal | ||
| ) |
from a logical and a numerical expression
Definition at line 111 of file L1GtLogicParser.cc.
References Exception, setLogicalExpression(), and setNumericalExpression().
{
// checks also for correctness
if ( !setLogicalExpression(logicalExpressionVal) ) {
// error(s) in logical expression - printed in the relevant place
throw cms::Exception("FailModule")
<< "\nError in parsing the logical expression = " << logicalExpressionVal
<< std::endl;
}
if ( !setNumericalExpression(numericalExpressionVal) ) {
// error(s) in numerical expression - printed in the relevant place
throw cms::Exception("FileModule")
<< "\nError in parsing the numerical expression = " << numericalExpressionVal
<< std::endl;
}
}
| L1GtLogicParser::L1GtLogicParser | ( | const std::string & | logicalExpressionVal, |
| const std::string & | numericalExpressionVal, | ||
| const bool | dummy | ||
| ) |
from a logical and a numerical expression no checks for correctness - use it only after the correctness was tested
Definition at line 136 of file L1GtLogicParser.cc.
References buildRpnVector(), clearRpnVector(), Exception, m_logicalExpression, and m_numericalExpression.
{
clearRpnVector();
if ( !buildRpnVector(logicalExpressionVal) ) {
throw cms::Exception("FileModule")
<< "\nError in building RPN vector for the logical expression = "
<< logicalExpressionVal
<< std::endl;
}
m_logicalExpression = logicalExpressionVal;
m_numericalExpression = numericalExpressionVal;
}
| L1GtLogicParser::~L1GtLogicParser | ( | ) | [virtual] |
| void L1GtLogicParser::addBracketSpaces | ( | const std::string & | srcExpression, |
| std::string & | dstExpression | ||
| ) | [protected] |
add spaces before and after parantheses
Definition at line 1561 of file L1GtLogicParser.cc.
References brackets, position, and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by checkLogicalExpression(), L1GtLogicParser(), setLogicalExpression(), and setNumericalExpression().
{
static const std::string brackets = "()"; // the brackets to be found
dstExpression = srcExpression; // copy the string
size_t position = 0;
while ((position = dstExpression.find_first_of(brackets, position))
!= std::string::npos) {
// add space after if none is there
if (((position + 1) != std::string::npos) && (dstExpression[position
+ 1] != ' ')) {
dstExpression.insert(position + 1, " ");
}
// add space before if none is there
if ((position != 0) && (dstExpression[position - 1] != ' ')) {
dstExpression.insert(position, " ");
position++;
}
position++;
}
}
| void L1GtLogicParser::buildOperandTokenVector | ( | ) |
build from the RPN vector the operand token vector dummy tokenNumber and tokenResult
Definition at line 436 of file L1GtLogicParser.cc.
References m_operandTokenVector, m_rpnVector, OP_AND, OP_NOT, OP_OPERAND, OP_OR, L1GtLogicParser::OperandToken::tokenName, L1GtLogicParser::OperandToken::tokenNumber, and L1GtLogicParser::OperandToken::tokenResult.
Referenced by L1GtLogicParser().
{
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::buildOperandTokenVector - "
//<< std::endl;
// reserve memory
size_t rpnVectorSize = m_rpnVector.size();
m_operandTokenVector.reserve(rpnVectorSize);
int opNumber = 0;
for(RpnVector::const_iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
//LogTrace("L1GtLogicParser")
//<< "\nit->operation = " << it->operation
//<< "\nit->operand = '" << it->operand << "'\n"
//<< std::endl;
switch (it->operation) {
case OP_OPERAND: {
OperandToken opToken;
opToken.tokenName = it->operand;
opToken.tokenNumber = opNumber;
opToken.tokenResult = false;
m_operandTokenVector.push_back(opToken);
}
break;
case OP_NOT: {
// do nothing
}
break;
case OP_OR: {
// do nothing
}
break;
case OP_AND: {
// do nothing
}
break;
default: {
// should not arrive here
}
break;
}
opNumber++;
}
}
| void L1GtLogicParser::buildOperandTokenVectorNumExp | ( | ) |
build from the RPN vector the operand token vector using a numerical expression
Definition at line 885 of file L1GtLogicParser.cc.
References m_operandTokenVector, m_rpnVector, OP_AND, OP_NOT, OP_OPERAND, OP_OR, operandResultNumExp(), L1GtLogicParser::OperandToken::tokenName, L1GtLogicParser::OperandToken::tokenNumber, and L1GtLogicParser::OperandToken::tokenResult.
{
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::buildOperandTokenVector - "
//<< std::endl;
// reserve memory
size_t rpnVectorSize = m_rpnVector.size();
m_operandTokenVector.reserve(rpnVectorSize);
int opNumber = 0;
for(RpnVector::const_iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
//LogTrace("L1GtLogicParser")
//<< "\nit->operation = " << it->operation
//<< "\nit->operand = '" << it->operand << "'\n"
//<< std::endl;
switch (it->operation) {
case OP_OPERAND: {
OperandToken opToken;
opToken.tokenName = it->operand;
opToken.tokenNumber = opNumber;
opToken.tokenResult = operandResultNumExp(it->operand);
m_operandTokenVector.push_back(opToken);
}
break;
case OP_NOT: {
// do nothing
}
break;
case OP_OR: {
// do nothing
}
break;
case OP_AND: {
// do nothing
}
break;
default: {
// should not arrive here
}
break;
}
opNumber++;
}
}
| bool L1GtLogicParser::buildRpnVector | ( | const std::string & | logicalExpressionVal | ) |
build the rpn vector
buildRpnVector Build the postfix notation.
| expression | The expression to be parsed. |
Definition at line 198 of file L1GtLogicParser.cc.
References clearRpnVector(), getOperation(), m_rpnVector, OP_AND, OP_CLOSEBRACKET, OP_INVALID, OP_NOT, OP_NULL, OP_OPENBRACKET, OP_OPERAND, OP_OR, python::multivaluedict::pop(), and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by checkLogicalExpression(), L1GtLogicParser(), and setLogicalExpression().
{
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::buildRpnVector - "
//<< "\nLogical expression = '" << logicalExpressionVal << "'\n"
//<< std::endl;
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
// token as string and as TokenRPN, stack to form the postfix notation
std::string tokenString;
TokenRPN rpnToken;
std::stack<TokenRPN> operatorStack;
static const std::string whitespaces=" \r\v\n\t";
// clear possible old rpn vector
clearRpnVector();
// stringstream to separate all tokens
std::istringstream exprStringStream(logicalExpressionVal);
while ( !exprStringStream.eof() ) {
exprStringStream >> std::skipws >> std::ws >> tokenString;
// skip the end
if (tokenString.find_first_not_of(whitespaces) == std::string::npos ||
tokenString.length() == 0) {
//LogTrace("L1GtLogicParser")
//<< " Break for token string = " << tokenString
//<< std::endl;
break;
}
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
//LogTrace("L1GtLogicParser")
//<< " Token string = '" << tokenString << "'"
//<< "\tActual Operation = " << actualOperation
//<< std::endl;
// https://en.wikipedia.org/wiki/Postfix_notation#Converting_from_infix_notation
switch (actualOperation) {
case OP_OPERAND: {
// operands get pushed to the postfix notation immediately
m_rpnVector.push_back(rpnToken);
}
break;
case OP_INVALID: {
int errorPosition = exprStringStream.tellg();
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing: "
<< "\n " << exprStringStream.str().substr(0,errorPosition)
<< "\n " << exprStringStream.str().substr(errorPosition)
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
break;
case OP_NOT: {
operatorStack.push(rpnToken);
// there are no operators with higher precedence
}
break;
case OP_AND: {
// first pop operators with higher precedence (NOT)
while (!operatorStack.empty() && operatorStack.top().operation == OP_NOT) {
m_rpnVector.push_back(operatorStack.top());
operatorStack.pop();
}
operatorStack.push(rpnToken);
}
break;
case OP_OR: {
// pop operators with higher precedence (AND, NOT)
while (!operatorStack.empty() &&
(operatorStack.top().operation == OP_NOT ||
operatorStack.top().operation == OP_AND) ) {
m_rpnVector.push_back(operatorStack.top());
operatorStack.pop();
}
// push operator on stack
operatorStack.push(rpnToken);
}
break;
case OP_OPENBRACKET: {
// just push it on stack
operatorStack.push(rpnToken);
}
break;
case OP_CLOSEBRACKET: {
// check if the operatorStack is empty
if (operatorStack.empty()) {
int errorPosition = exprStringStream.tellg();
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing - misplaced ')':"
<< "\n " << exprStringStream.str().substr(0,errorPosition)
<< "\n " << exprStringStream.str().substr(errorPosition)
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
// pop stack until a left parenthesis is found
do {
if (operatorStack.top().operation != OP_OPENBRACKET) {
m_rpnVector.push_back(operatorStack.top()); // pop
operatorStack.pop();
}
if (operatorStack.empty()) { // the operatorStack must not be empty
int errorPosition = exprStringStream.tellg();
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing - misplaced ')':"
<< "\n " << exprStringStream.str().substr(0,errorPosition)
<< "\n " << exprStringStream.str().substr(errorPosition)
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
} while (operatorStack.top().operation != OP_OPENBRACKET);
operatorStack.pop(); // pop the open bracket.
}
break;
default: {
// empty
}
break;
}
lastOperation = actualOperation; // for the next turn
}
// pop the rest of the operator stack
while (!operatorStack.empty()) {
if (operatorStack.top().operation == OP_OPENBRACKET) {
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing - missing ')':"
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
m_rpnVector.push_back(operatorStack.top());
operatorStack.pop();
}
// count all operations and check if the result is 1
int counter = 0;
for(RpnVector::iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
if (it->operation == OP_OPERAND)
counter++;
if (it->operation == OP_OR || it->operation == OP_AND)
counter--;
if (counter < 1) {
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing - too many operators"
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
}
if (counter > 1) {
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << logicalExpressionVal << "'"
<< "\n Syntax error during parsing - too many operands"
<< "\n Returned empty RPN vector and result false."
<< std::endl;
// clear the rpn vector before returning
clearRpnVector();
return false;
}
return true;
}
| bool L1GtLogicParser::checkLogicalExpression | ( | std::string & | logicalExpressionVal | ) |
check a logical expression for correctness - add/remove spaces if needed
Definition at line 162 of file L1GtLogicParser.cc.
References addBracketSpaces(), buildRpnVector(), clearRpnVector(), LogDebug, and AlCaHLTBitMon_QueryRunRegistry::string.
{
// add spaces around brackets
std::string logicalExpressionBS;
addBracketSpaces(logicalExpressionVal, logicalExpressionBS);
// trim leading or trailing spaces
boost::trim(logicalExpressionBS);
clearRpnVector();
if ( !buildRpnVector(logicalExpressionBS) ) {
return false;
}
LogDebug("L1GtLogicParser") << "\nL1GtLogicParser::checkLogicalExpression - "
<< "\nInitial logical expression = '" << logicalExpressionVal << "'"
<< "\nFinal logical expression = '" << logicalExpressionBS << "'\n"
<< std::endl;
logicalExpressionVal = logicalExpressionBS;
return true;
}
| void L1GtLogicParser::clearRpnVector | ( | ) |
clear possible old rpn vector
Definition at line 426 of file L1GtLogicParser.cc.
References m_rpnVector.
Referenced by buildRpnVector(), checkLogicalExpression(), L1GtLogicParser(), and setLogicalExpression().
{
m_rpnVector.clear();
}
| void L1GtLogicParser::convertIntToNameLogicalExpression | ( | const std::map< int, std::string > & | intToNameMap | ) |
convert a logical expression composed with integer numbers to a logical expression composed with names using a map (int, string)
Definition at line 1135 of file L1GtLogicParser.cc.
References getOperation(), getRuleFromType(), m_logicalExpression, OP_INVALID, OP_NULL, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by L1GtTriggerMenuConfigOnlineProd::convertLogicalExpression().
{
if (m_logicalExpression.empty()) {
return;
}
// non-empty logical expression
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
std::string tokenString;
TokenRPN rpnToken; // token to be used by getOperation
// stringstream to separate all tokens
std::istringstream exprStringStream(m_logicalExpression);
std::string convertedLogicalExpression;
while (!exprStringStream.eof()) {
exprStringStream >> tokenString;
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
if (actualOperation == OP_INVALID) {
// it should never be invalid
edm::LogError("L1GtLogicParser") << "\nLogical expression = '" << m_logicalExpression
<< "'" << "\n Invalid operation/operand in logical expression."
<< "\n Return empty logical expression." << std::endl;
m_logicalExpression.clear();
return;
}
if (actualOperation != OP_OPERAND) {
convertedLogicalExpression.append(getRuleFromType(actualOperation)->opString);
} else {
typedef std::map<int, std::string>::const_iterator CIter;
// convert string to int
int indexInt;
std::istringstream iss(rpnToken.operand);
iss >> std::dec >> indexInt;
CIter it = intToNameMap.find(indexInt);
if (it != intToNameMap.end()) {
convertedLogicalExpression.append(it->second);
} else {
// it should never be happen
edm::LogError("L1GtLogicParser") << "\nLogical expression = '"
<< m_logicalExpression << "'" << "\n Could not convert "
<< rpnToken.operand << " to string!"
<< "\n Return empty logical expression." << std::endl;
m_logicalExpression.clear();
return;
}
}
convertedLogicalExpression.append(" "); // one whitespace after each token
lastOperation = actualOperation;
}
// remove the last space
//convertedLogicalExpression.erase(convertedLogicalExpression.size() - 1);
boost::trim(convertedLogicalExpression);
//LogDebug("L1GtLogicParser")
// << "\nL1GtLogicParser::convertIntToNameLogicalExpression - "
// << "\nLogical expression (int) = '" << m_logicalExpression << "'"
// << "\nLogical expression (string) = '" << convertedLogicalExpression << "'\n"
// << std::endl;
// replace now the logical expression with int with
// the converted logical expression
m_logicalExpression = convertedLogicalExpression;
return;
}
| void L1GtLogicParser::convertNameToIntLogicalExpression | ( | const std::map< std::string, int > & | nameToIntMap | ) |
convert the logical expression composed with names to a logical expression composed with int numbers using a (string, int) map
Definition at line 1035 of file L1GtLogicParser.cc.
References getOperation(), getRuleFromType(), LogDebug, m_logicalExpression, OP_INVALID, OP_NULL, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, and AlCaHLTBitMon_QueryRunRegistry::string.
{
if (m_logicalExpression.empty()) {
return;
}
// non-empty logical expression
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
std::string tokenString;
TokenRPN rpnToken; // token to be used by getOperation
int intValue = -1;
// stringstream to separate all tokens
std::istringstream exprStringStream(m_logicalExpression);
std::string convertedLogicalExpression;
while (!exprStringStream.eof()) {
exprStringStream >> tokenString;
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
if (actualOperation == OP_INVALID) {
// it should never be invalid
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n Invalid operation/operand in logical expression."
<< "\n Return empty logical expression."
<< std::endl;
m_logicalExpression.clear();
return;
}
if (actualOperation != OP_OPERAND) {
convertedLogicalExpression.append(getRuleFromType(actualOperation)->opString);
} else {
typedef std::map<std::string, int>::const_iterator CIter;
CIter it = nameToIntMap.find(rpnToken.operand);
if (it != nameToIntMap.end()) {
intValue = it->second;
std::stringstream intStr;
intStr << intValue;
convertedLogicalExpression.append(intStr.str());
} else {
// it should never be happen
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n Could not convert " << rpnToken.operand << " to integer!"
<< "\n Return empty logical expression."
<< std::endl;
m_logicalExpression.clear();
return;
}
}
convertedLogicalExpression.append(" "); // one whitespace after each token
lastOperation = actualOperation;
}
// remove the last space
//convertedLogicalExpression.erase(convertedLogicalExpression.size() - 1);
boost::trim(convertedLogicalExpression);
LogDebug("L1GtLogicParser")
<< "\nL1GtLogicParser::convertNameToIntLogicalExpression - "
<< "\nLogical expression (strings) = '" << m_logicalExpression << "'"
<< "\nLogical expression (int) = '" << convertedLogicalExpression << "'\n"
<< std::endl;
// replace now the logical expression with strings with
// the converted logical expression
m_logicalExpression = convertedLogicalExpression;
return;
}
| const bool L1GtLogicParser::expressionResult | ( | ) | const [virtual] |
return the result for the logical expression require a proper operand token vector
Definition at line 687 of file L1GtLogicParser.cc.
References m_rpnVector, OP_AND, OP_NOT, OP_OPERAND, OP_OR, and operandResult().
Referenced by TriggerHelper::acceptGtLogicalExpression(), GenericTriggerEventFlag::acceptGtLogicalExpression(), TriggerHelper::acceptHltLogicalExpression(), GenericTriggerEventFlag::acceptHltLogicalExpression(), GenericTriggerEventFlag::acceptL1LogicalExpression(), TriggerHelper::acceptL1LogicalExpression(), HLTLevel1GTSeed::hltFilter(), and HLTLevel1GTSeed::seedsL1TriggerObjectMaps().
{
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::expressionResult - "
//<< std::endl;
// return false if there is no RPN vector built
if ( m_rpnVector.empty() ) {
edm::LogError("L1GtLogicParser")
<< "\n No built RPN vector exists."
<< "\n Returned false by default."
<< std::endl;
return false;
}
// stack containing temporary results
std::stack<bool> resultStack;
bool b1, b2;
for(RpnVector::const_iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
//LogTrace("L1GtLogicParser")
//<< "\nit->operation = " << it->operation
//<< "\nit->operand = '" << it->operand << "'\n"
//<< std::endl;
switch (it->operation) {
case OP_OPERAND: {
resultStack.push(operandResult(it->operand));
}
break;
case OP_NOT: {
b1 = resultStack.top();
resultStack.pop(); // pop the top
resultStack.push(!b1); // and push the result
}
break;
case OP_OR: {
b1 = resultStack.top();
resultStack.pop();
b2 = resultStack.top();
resultStack.pop();
resultStack.push(b1 || b2);
}
break;
case OP_AND: {
b1 = resultStack.top();
resultStack.pop();
b2 = resultStack.top();
resultStack.pop();
resultStack.push(b1 && b2);
}
break;
default: {
// should not arrive here
}
break;
}
}
// get the result in the top of the stack
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::expressionResult - "
//<< "\nResult = " << resultStack.top()
//<< std::endl;
return resultStack.top();
}
| const bool L1GtLogicParser::expressionResultNumExp | ( | ) | const [virtual] |
return the result for the logical expression require a proper numerical expression
Definition at line 948 of file L1GtLogicParser.cc.
References m_rpnVector, OP_AND, OP_NOT, OP_OPERAND, OP_OR, and operandResultNumExp().
{
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::expressionResult - "
//<< std::endl;
// return false if there is no expression
if ( m_rpnVector.empty() ) {
edm::LogError("L1GtLogicParser")
<< "\n No built RPN vector exists."
<< "\n Returned false by default."
<< std::endl;
return false;
}
// stack containing temporary results
std::stack<bool> resultStack;
bool b1, b2;
for(RpnVector::const_iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
//LogTrace("L1GtLogicParser")
//<< "\nit->operation = " << it->operation
//<< "\nit->operand = '" << it->operand << "'\n"
//<< std::endl;
switch (it->operation) {
case OP_OPERAND: {
resultStack.push(operandResultNumExp(it->operand));
}
break;
case OP_NOT: {
b1 = resultStack.top();
resultStack.pop(); // pop the top
resultStack.push(!b1); // and push the result
}
break;
case OP_OR: {
b1 = resultStack.top();
resultStack.pop();
b2 = resultStack.top();
resultStack.pop();
resultStack.push(b1 || b2);
}
break;
case OP_AND: {
b1 = resultStack.top();
resultStack.pop();
b2 = resultStack.top();
resultStack.pop();
resultStack.push(b1 && b2);
}
break;
default: {
// should not arrive here
}
break;
}
}
// get the result in the top of the stack
//LogTrace("L1GtLogicParser")
//<< "\nL1GtLogicParser::expressionResult - "
//<< "\nLogical expression = '" << m_logicalExpression << "'"
//<< "\nNumerical expression = '" << m_numericalExpression << "'"
//<< "\nResult = " << resultStack.top()
//<< std::endl;
return resultStack.top();
}
| std::vector< L1GtLogicParser::OperandToken > L1GtLogicParser::expressionSeedsOperandList | ( | ) |
return the list of operand tokens for the logical expression which are to be used as seeds
Definition at line 1230 of file L1GtLogicParser.cc.
References m_operandTokenVector, m_rpnVector, OP_AND, OP_NOT, OP_OPERAND, OP_OR, L1GtLogicParser::OperandToken::tokenName, L1GtLogicParser::OperandToken::tokenNumber, and L1GtLogicParser::OperandToken::tokenResult.
Referenced by L1GtTriggerMenuTester::associateL1SeedsHltPath(), HLTLevel1GTSeed::HLTLevel1GTSeed(), and HLTLevel1GTSeed::seedsL1TriggerObjectMaps().
{
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::expressionSeedsOperandList - "
//<< "\nLogical expression = '" << m_logicalExpression << "'"
//<< "\nm_rpnVector.size() = " << m_rpnVector.size()
//<< "\nm_operandTokenVector.size() = " << m_operandTokenVector.size()
//<< std::endl;
// seed list
std::vector<OperandToken> opVector;
opVector.reserve(m_operandTokenVector.size());
// temporary results
std::stack<OperandToken> tmpStack;
std::vector<OperandToken> tmpVector;
tmpVector.reserve(m_operandTokenVector.size());
OperandToken b1, b2;
bool newOperandBlock = true;
bool oneBlockOnly = true;
bool operandOnly = true;
int iOperand = -1;
OperandToken dummyToken;
dummyToken.tokenName = "dummy";
dummyToken.tokenNumber = -1;
dummyToken.tokenResult = false;
for(RpnVector::const_iterator it = m_rpnVector.begin(); it != m_rpnVector.end(); it++) {
//LogTrace("L1GtLogicParser")
//<< "\nit->operation = " << it->operation
//<< "\nit->operand = '" << it->operand << "'\n"
//<< std::endl;
switch (it->operation) {
// RPN always start a block with an operand
case OP_OPERAND: {
// more blocks with operations
// push operands from previous block, if any in the tmpVector
// (reverse order to compensate the stack push/top/pop)
if ( (!newOperandBlock) ) {
for (std::vector<OperandToken>::reverse_iterator itOp = tmpVector.rbegin();
itOp != tmpVector.rend(); itOp++) {
opVector.push_back(*itOp);
//LogTrace("L1GtLogicParser")
//<< " Push operand " << (*itOp).tokenName
//<<" on the seed operand list"
//<< std::endl;
}
tmpVector.clear();
newOperandBlock = true;
oneBlockOnly = false;
}
iOperand++;
//LogTrace("L1GtLogicParser")
//<< " Push operand " << (m_operandTokenVector.at(iOperand)).tokenName
//<< " on the operand stack"
//<< std::endl;
tmpStack.push(m_operandTokenVector.at(iOperand));
}
break;
case OP_NOT: {
newOperandBlock = false;
operandOnly = false;
b1 = tmpStack.top();
tmpStack.pop(); // pop the top
tmpStack.push(dummyToken); // and push dummy result
//LogTrace("L1GtLogicParser")
//<< " Clear tmp operand list"
//<< std::endl;
tmpVector.clear();
}
break;
case OP_OR: {
newOperandBlock = false;
operandOnly = false;
b1 = tmpStack.top();
tmpStack.pop();
b2 = tmpStack.top();
tmpStack.pop();
tmpStack.push(dummyToken); // and push dummy result
if ( b1.tokenNumber >= 0 ) {
tmpVector.push_back(b1);
//LogTrace("L1GtLogicParser")
//<< " Push operand " << b1.tokenName
//<<" on the tmp list"
//<< std::endl;
}
if ( b2.tokenNumber >= 0 ) {
tmpVector.push_back(b2);
//LogTrace("L1GtLogicParser")
//<< " Push operand " << b2.tokenName
//<<" on the tmp list"
//<< std::endl;
}
}
break;
case OP_AND: {
newOperandBlock = false;
operandOnly = false;
b1 = tmpStack.top();
tmpStack.pop();
b2 = tmpStack.top();
tmpStack.pop();
tmpStack.push(dummyToken);
if ( b1.tokenNumber >= 0 ) {
tmpVector.push_back(b1);
//LogTrace("L1GtLogicParser")
//<< " Push operand " << b1.tokenName
//<<" on the tmp list"
//<< std::endl;
}
if ( b2.tokenNumber >= 0 ) {
tmpVector.push_back(b2);
//LogTrace("L1GtLogicParser")
//<< " Push operand " << b2.tokenName
//<<" on the tmp list"
//<< std::endl;
}
}
break;
default: {
// should not arrive here
}
break;
}
}
// one block only or one operand only
if ( oneBlockOnly || operandOnly ) {
// one operand only -
// there can be only one operand, otherwise one needs an operation
if (operandOnly) {
b1 = tmpStack.top();
tmpVector.push_back(b1);
}
//
for (std::vector<OperandToken>::reverse_iterator itOp = tmpVector.rbegin();
itOp != tmpVector.rend(); itOp++) {
opVector.push_back(*itOp);
//LogTrace("L1GtLogicParser")
//<< " One block or one operand only: push operand " << (*itOp).tokenName
//<<" on the seed operand list"
//<< std::endl;
}
} else {
//LogTrace("L1GtLogicParser")
// << " More blocks: push the last block on the seed operand list" << std::endl;
for (std::vector<OperandToken>::reverse_iterator itOp = tmpVector.rbegin();
itOp != tmpVector.rend(); itOp++) {
opVector.push_back(*itOp);
//LogTrace("L1GtLogicParser")
//<< " Push operand: " << (*itOp).tokenName
//<<" on the seed operand list"
//<< std::endl;
}
}
// remove duplicates from the seed vector
// slow...
std::vector<OperandToken> opVectorU;
opVectorU.reserve(opVector.size());
for (std::vector<OperandToken>::const_iterator constIt = opVector.begin(); constIt
!= opVector.end(); constIt++) {
bool tokenIncluded = false;
for (std::vector<OperandToken>::iterator itOpU = opVectorU.begin(); itOpU
!= opVectorU.end(); itOpU++) {
if ( ( *itOpU ).tokenName == ( *constIt ).tokenName) {
tokenIncluded = true;
break;
}
}
if (!tokenIncluded) {
opVectorU.push_back(*constIt);
}
}
return opVectorU;
}
| L1GtLogicParser::OperationType L1GtLogicParser::getOperation | ( | const std::string & | tokenString, |
| OperationType | lastOperation, | ||
| TokenRPN & | rpnToken | ||
| ) | const [protected, virtual] |
getOperation Get the operation from a string and check if it is allowed
| tokenString | The string to examine. |
| lastOperation | The last operation. |
| rpnToken | The destination where the token for postfix notation is written to. |
Definition at line 1492 of file L1GtLogicParser.cc.
References i, m_operationRules, OP_INVALID, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, and L1GtLogicParser::TokenRPN::operation.
Referenced by buildRpnVector(), convertIntToNameLogicalExpression(), convertNameToIntLogicalExpression(), operandIndex(), operandName(), and operandResultNumExp().
{
OperationType actualOperation = OP_OPERAND; // default value
int i = 0;
while (m_operationRules[i].opType != OP_OPERAND) {
if (tokenString == m_operationRules[i].opString) {
actualOperation = (OperationType) m_operationRules[i].opType;
break;
}
i++;
}
// check if the operation is allowed
if (m_operationRules[i].forbiddenLastOperation & lastOperation) {
return OP_INVALID;
}
//
if (actualOperation == OP_OPERAND) {
rpnToken.operand = tokenString;
} else {
rpnToken.operand = "";
}
rpnToken.operation = actualOperation;
// else we got a valid operation
return actualOperation;
}
| const L1GtLogicParser::OperationRule * L1GtLogicParser::getRuleFromType | ( | OperationType | oType | ) | [protected] |
get the rule entry to an operation type
getRuleFromType Looks for the entry in the operation rules and returns a reference if it was found
| oType | The type of the operation. |
Definition at line 1540 of file L1GtLogicParser.cc.
References i, m_operationRules, and OP_NULL.
Referenced by convertIntToNameLogicalExpression(), and convertNameToIntLogicalExpression().
{
int i = 0;
while (
(m_operationRules[i].opType != oType) &&
(m_operationRules[i].opType != OP_NULL) ) {
i++;
}
if (m_operationRules[i].opType == OP_NULL) {
return 0;
}
return &(m_operationRules[i]);
}
| std::string L1GtLogicParser::logicalExpression | ( | ) | const [inline] |
return the logical expression
Definition at line 100 of file L1GtLogicParser.h.
References m_logicalExpression.
Referenced by L1GtTriggerMenuConfigOnlineProd::convertLogicalExpression().
{ return m_logicalExpression; }
| std::string L1GtLogicParser::numericalExpression | ( | ) | const [inline] |
return the numerical expression
Definition at line 106 of file L1GtLogicParser.h.
References m_numericalExpression.
{ return m_numericalExpression; }
| int L1GtLogicParser::operandIndex | ( | const std::string & | operandNameVal | ) | const |
return the position index of the operand in the logical expression
Definition at line 498 of file L1GtLogicParser.cc.
References getOperation(), m_logicalExpression, OP_INVALID, OP_NULL, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, query::result, and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by operandResultNumExp().
{
int result = -1;
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
std::string tokenString;
TokenRPN rpnToken; // token to be used by getOperation
// stringstream to separate all tokens
std::istringstream exprStringStream(m_logicalExpression);
// temporary index for usage in the loop
int tmpIndex = -1;
while (!exprStringStream.eof()) {
exprStringStream >> tokenString;
//LogTrace("L1GtLogicParser")
//<< "Token string = " << tokenString
//<< std::endl;
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
if (actualOperation == OP_INVALID) {
// it should never be invalid
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n Invalid operation/operand " << operandNameVal
<< "\n Returned index is by default out of range (-1)."
<< std::endl;
return result;
}
if (actualOperation != OP_OPERAND) {
// do nothing
} else {
tmpIndex++;
if (rpnToken.operand == operandNameVal) {
result = tmpIndex;
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::operandIndex - "
//<< "\nLogical expression = '" << m_logicalExpression << "'"
//<< "\nIndex of operand " << operandNameVal << " = " << result
//<< std::endl;
return result;
}
}
lastOperation = actualOperation;
}
//
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n Operand " << operandNameVal << " not found in the logical expression"
<< "\n Returned index is by default out of range (-1)."
<< std::endl;
return result;
}
| std::string L1GtLogicParser::operandName | ( | const int | iOperand | ) | const |
return the name of the (iOperand)th operand in the logical expression
Definition at line 570 of file L1GtLogicParser.cc.
References getOperation(), m_logicalExpression, OP_INVALID, OP_NULL, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, query::result, and AlCaHLTBitMon_QueryRunRegistry::string.
{
std::string result;
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
std::string tokenString;
TokenRPN rpnToken; // token to be used by getOperation
// stringstream to separate all tokens
std::istringstream exprStringStream(m_logicalExpression);
// temporary index for usage in the loop
int tmpIndex = -1;
while (!exprStringStream.eof()) {
exprStringStream >> tokenString;
//LogTrace("L1GtLogicParser")
//<< "Token string = " << tokenString
//<< std::endl;
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
if (actualOperation == OP_INVALID) {
// it should never be invalid
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n Invalid operation/operand at position " << iOperand
<< "\n Returned empty name by default."
<< std::endl;
return result;
}
if (actualOperation != OP_OPERAND) {
// do nothing
} else {
tmpIndex++;
if (tmpIndex == iOperand) {
result = rpnToken.operand;
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::operandName - "
//<< "\nLogical expression = '" << m_logicalExpression << "'"
//<< "\nOperand with index " << iOperand << " = " << result
//<< std::endl;
return result;
}
}
lastOperation = actualOperation;
}
//
edm::LogError("L1GtLogicParser")
<< "\nLogical expression = '" << m_logicalExpression << "'"
<< "\n No operand found at position " << iOperand
<< "\n Returned empty name by default."
<< std::endl;
return result;
}
| bool L1GtLogicParser::operandResult | ( | const int | tokenNumberVal | ) | const |
return the result for an operand with tokenNumberVal using the operand token vector
Definition at line 665 of file L1GtLogicParser.cc.
References i, and m_operandTokenVector.
{
for (size_t i = 0; i < m_operandTokenVector.size(); ++i) {
if ((m_operandTokenVector[i]).tokenNumber == tokenNumberVal) {
return (m_operandTokenVector[i]).tokenResult;
}
}
// return false - should not arrive here
edm::LogError("L1GtLogicParser")
<< "\n No operand with token number " << tokenNumberVal
<< " found in the operand token vector"
<< "\n Returned false by default."
<< std::endl;
return false;
}
| bool L1GtLogicParser::operandResult | ( | const std::string & | operandNameVal | ) | const |
return the result for an operand with name operandNameVal in the logical expression using the operand token vector
Definition at line 644 of file L1GtLogicParser.cc.
References i, and m_operandTokenVector.
Referenced by expressionResult(), and operandResultNumExp().
{
for (size_t i = 0; i < m_operandTokenVector.size(); ++i) {
if ((m_operandTokenVector[i]).tokenName == operandNameVal) {
return (m_operandTokenVector[i]).tokenResult;
}
}
// return false - should not arrive here
edm::LogError("L1GtLogicParser")
<< "\n Operand " << operandNameVal << " not found in the operand token vector"
<< "\n Returned false by default."
<< std::endl;
return false;
}
| bool L1GtLogicParser::operandResultNumExp | ( | const int | iOperand | ) | const |
return the result for an operand with index iOperand in the logical expression using a numerical expression
Definition at line 787 of file L1GtLogicParser.cc.
References getOperation(), m_numericalExpression, OP_INVALID, OP_NULL, OP_OPERAND, L1GtLogicParser::TokenRPN::operand, query::result, and AlCaHLTBitMon_QueryRunRegistry::string.
{
bool result = false;
// parse the numerical expression
OperationType actualOperation = OP_NULL;
OperationType lastOperation = OP_NULL;
std::string tokenString;
TokenRPN rpnToken; // token to be used by getOperation
// stringstream to separate all tokens
std::istringstream exprStringStream(m_numericalExpression);
// temporary index for usage in the loop
int tmpIndex = -1;
while (!exprStringStream.eof()) {
exprStringStream >> tokenString;
//LogTrace("L1GtLogicParser")
//<< "Token string = " << tokenString
//<< std::endl;
actualOperation = getOperation(tokenString, lastOperation, rpnToken);
if (actualOperation == OP_INVALID) {
// it should never be invalid
edm::LogError("L1GtLogicParser")
<< "\nNumerical expression = '" << m_numericalExpression << "'"
<< "\n Invalid operation/operand at position " << iOperand
<< "\n Returned false by default."
<< std::endl;
result = false;
return result;
}
if (actualOperation != OP_OPERAND) {
// do nothing
} else {
tmpIndex++;
if (tmpIndex == iOperand) {
if (rpnToken.operand == "1") {
result = true;
} else {
if (rpnToken.operand == "0") {
result = false;
} else {
// something went wrong - break
//
edm::LogError("L1GtLogicParser")
<< "\nNumerical expression = '" << m_numericalExpression << "'"
<< "\n Invalid result for operand at position " << iOperand
<< ": " << rpnToken.operand
<< "\n It must be 0 or 1"
<< "\n Returned false by default."
<< std::endl;
result = false;
return result;
}
}
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::operandResult - "
//<< "\nNumerical expression = '" << m_numericalExpression << "'"
//<< "\nResult for operand with index " << iOperand
//<< " = " << result << "'\n"
//<< std::endl;
return result;
}
}
lastOperation = actualOperation;
}
//
edm::LogError("L1GtLogicParser")
<< "\nNumerical expression = '" << m_numericalExpression << "'"
<< "\n No operand found at position " << iOperand
<< "\n Returned false by default."
<< std::endl;
return result;
}
| bool L1GtLogicParser::operandResultNumExp | ( | const std::string & | operandNameVal | ) | const |
return the result for an operand with name operandNameVal in the logical expression using a numerical expression
Definition at line 771 of file L1GtLogicParser.cc.
References operandIndex(), operandResult(), and query::result.
Referenced by buildOperandTokenVectorNumExp(), and expressionResultNumExp().
{
bool result = false;
// get the position index of the operand in the logical string
const int iOperand = operandIndex(operandNameVal);
result = operandResult(iOperand);
return result;
}
| const std::vector<OperandToken>& L1GtLogicParser::operandTokenVector | ( | ) | const [inline] |
Definition at line 125 of file L1GtLogicParser.h.
References m_operandTokenVector.
{ return m_operandTokenVector; }
| std::vector<OperandToken>& L1GtLogicParser::operandTokenVector | ( | ) | [inline] |
return the vector of operand tokens
Definition at line 124 of file L1GtLogicParser.h.
References m_operandTokenVector.
Referenced by TriggerHelper::acceptGtLogicalExpression(), GenericTriggerEventFlag::acceptGtLogicalExpression(), TriggerHelper::acceptHltLogicalExpression(), GenericTriggerEventFlag::acceptHltLogicalExpression(), GenericTriggerEventFlag::acceptL1LogicalExpression(), TriggerHelper::acceptL1LogicalExpression(), HLTLevel1GTSeed::convertStringToBitNumber(), HLTLevel1GTSeed::debugPrint(), HLTLevel1GTSeed::HLTLevel1GTSeed(), and HLTLevel1GTSeed::updateAlgoLogicParser().
{ return m_operandTokenVector; }
| RpnVector L1GtLogicParser::rpnVector | ( | ) | const [inline] |
return the RPN vector
Definition at line 117 of file L1GtLogicParser.h.
References m_rpnVector.
Referenced by L1GtAlgorithm::L1GtAlgorithm().
{ return m_rpnVector; }
| bool L1GtLogicParser::setLogicalExpression | ( | const std::string & | logicalExpressionVal | ) | [protected] |
set the logical expression - check for correctness the input string
Definition at line 1589 of file L1GtLogicParser.cc.
References addBracketSpaces(), buildRpnVector(), clearRpnVector(), m_logicalExpression, and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by L1GtLogicParser().
{
// add spaces around brackets
std::string logicalExpressionBS;
addBracketSpaces(logicalExpressionVal, logicalExpressionBS);
// trim leading or trailing spaces
boost::trim(logicalExpressionBS);
clearRpnVector();
if ( !buildRpnVector(logicalExpressionBS) ) {
m_logicalExpression = "";
return false;
}
m_logicalExpression = logicalExpressionBS;
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::setLogicalExpression - "
//<< "\nLogical expression = '" << m_logicalExpression << "'\n"
//<< std::endl;
return true;
}
| bool L1GtLogicParser::setNumericalExpression | ( | const std::string & | numericalExpressionVal | ) | [protected] |
set the numerical expression (the logical expression with each operand replaced with the value) from a string check also for correctness the input string
Definition at line 1620 of file L1GtLogicParser.cc.
References addBracketSpaces(), m_numericalExpression, and AlCaHLTBitMon_QueryRunRegistry::string.
Referenced by L1GtLogicParser().
{
// add spaces around brackets
std::string numericalExpressionBS;
addBracketSpaces(numericalExpressionVal, numericalExpressionBS);
// check for consistency with the logical expression
// TODO FIXME
// trim leading or trailing spaces
boost::trim(numericalExpressionBS);
m_numericalExpression = numericalExpressionBS;
//LogDebug("L1GtLogicParser")
//<< "\nL1GtLogicParser::setNumericalExpression - "
//<< "\nNumerical Expression = '" << m_numericalExpression << "'\n"
//<< std::endl;
return true;
}
std::string L1GtLogicParser::m_logicalExpression [protected] |
logical expression to be parsed
Definition at line 214 of file L1GtLogicParser.h.
Referenced by convertIntToNameLogicalExpression(), convertNameToIntLogicalExpression(), L1GtLogicParser(), logicalExpression(), operandIndex(), operandName(), and setLogicalExpression().
std::string L1GtLogicParser::m_numericalExpression [protected] |
numerical expression (logical expression with operands replaced with the actual values)
Definition at line 218 of file L1GtLogicParser.h.
Referenced by L1GtLogicParser(), numericalExpression(), operandResultNumExp(), and setNumericalExpression().
std::vector<OperandToken> L1GtLogicParser::m_operandTokenVector [protected] |
vector of operand tokens
Definition at line 224 of file L1GtLogicParser.h.
Referenced by buildOperandTokenVector(), buildOperandTokenVectorNumExp(), expressionSeedsOperandList(), L1GtLogicParser(), operandResult(), and operandTokenVector().
struct OperationRule L1GtLogicParser::m_operationRules[] [static, protected] |
Definition at line 196 of file L1GtLogicParser.h.
Referenced by getOperation(), and getRuleFromType().
RpnVector L1GtLogicParser::m_rpnVector [protected] |
RPN vector - equivalent to the logical expression.
Definition at line 221 of file L1GtLogicParser.h.
Referenced by buildOperandTokenVector(), buildOperandTokenVectorNumExp(), buildRpnVector(), clearRpnVector(), expressionResult(), expressionResultNumExp(), expressionSeedsOperandList(), L1GtLogicParser(), and rpnVector().
1.7.3