|
|
|
#include <DTCalibValidation.h>
Public Member Functions | |
| void | analyze (const edm::Event &event, const edm::EventSetup &setup) |
| void | beginJob () |
| BeginJob. | |
| void | beginRun (const edm::Run &, const edm::EventSetup &) |
| BeginRun. | |
| DTCalibValidation (const edm::ParameterSet &pset) | |
| Constructor. | |
| void | endJob () |
| Endjob. | |
| template<typename type > | |
| const type * | findBestRecHit (const DTLayer *layer, DTWireId wireId, const vector< type > &recHits, const float segmDist) |
| virtual | ~DTCalibValidation () |
| Destructor. | |
Private Member Functions | |
| void | bookHistos (DTSuperLayerId slId, int step) |
| template<typename type > | |
| void | compute (const DTGeometry *dtGeom, const DTRecSegment4D &segment, std::map< DTWireId, std::vector< type > > recHitsPerWire, int step) |
| void | fillHistos (DTSuperLayerId slId, float distance, float residualOnDistance, float position, float residualOnPosition, int step) |
| template<typename type > | |
| const type * | findBestRecHit (const DTLayer *layer, DTWireId wireId, const std::vector< type > &recHits, const float simHitDist) |
| std::map< DTWireId, std::vector< DTRecHit1D > > | map1DRecHitsPerWire (const DTRecSegment2DCollection *segment2Ds) |
| std::map< DTWireId, std::vector< DTRecHit1DPair > > | map1DRecHitsPerWire (const DTRecHitCollection *dt1DRecHitPairs) |
| std::map< DTWireId, std::vector< DTRecHit1D > > | map1DRecHitsPerWire (const DTRecSegment4DCollection *segment4Ds) |
| float | recHitDistFromWire (const DTRecHit1DPair &hitPair, const DTLayer *layer) |
| float | recHitDistFromWire (const DTRecHit1D &recHit, const DTLayer *layer) |
| float | recHitPosition (const DTRecHit1D &recHit, const DTLayer *layer, const DTChamber *chamber, float segmPos, int sl) |
| float | recHitPosition (const DTRecHit1DPair &hitPair, const DTLayer *layer, const DTChamber *chamber, float segmPos, int sl) |
Private Attributes | |
| bool | detailedAnalysis |
| edm::ESHandle< DTGeometry > | dtGeom |
| std::map< std::pair < DTSuperLayerId, int > , std::vector< MonitorElement * > > | histosPerSL |
| int | nevent |
| edm::ParameterSet | parameters |
| std::string | recHits1DLabel |
| int | rightSegment |
| std::string | segment2DLabel |
| std::string | segment4DLabel |
| DQMStore * | theDbe |
| int | wrongSegment |
Analysis on DT residuals to validate the kFactor
Definition at line 40 of file DTCalibValidation.h.
| DTCalibValidation::DTCalibValidation | ( | const edm::ParameterSet & | pset | ) |
Constructor.
Definition at line 36 of file DTCalibValidation.cc.
References cmsCodeRules::cppFunctionSkipper::operator, and Parameters::parameters.
{
//debug = pset.getUntrackedParameter<bool>("debug",false);
// Get the DQM needed services
// To remove into CMSSW versions before 20X
theDbe = edm::Service<DQMStore>().operator->();
// To add into CMSSW versions before 20X
/*theDbe = edm::Service<DaqMonitorBEInterface>().operator->();
theDbe->setVerbose(1);
edm::Service<MonitorDaemon>().operator->();*/
theDbe->setCurrentFolder("DT/DTCalibValidation");
parameters = pset;
}
| DTCalibValidation::~DTCalibValidation | ( | ) | [virtual] |
| void DTCalibValidation::analyze | ( | const edm::Event & | event, |
| const edm::EventSetup & | setup | ||
| ) | [virtual] |
Implements edm::EDAnalyzer.
Definition at line 123 of file DTCalibValidation.cc.
References bookConverter::compute(), LogTrace, nevent, and edm::Handle< T >::product().
{
++nevent;
LogTrace("DTCalibValidation") << "[DTCalibValidation] Analyze #Run: " << event.id().run()
<< " #Event: " << nevent;
// RecHit mapping at Step 1 -------------------------------
map<DTWireId,vector<DTRecHit1DPair> > recHitsPerWire_1S;
// RecHit mapping at Step 2 ------------------------------
map<DTWireId,vector<DTRecHit1D> > recHitsPerWire_2S;
if(detailedAnalysis){
LogTrace("DTCalibValidation") << " -- DTRecHit S1: begin analysis:";
// Get the rechit collection from the event
Handle<DTRecHitCollection> dtRecHits;
event.getByLabel(recHits1DLabel, dtRecHits);
recHitsPerWire_1S = map1DRecHitsPerWire(dtRecHits.product());
LogTrace("DTCalibValidation") << " -- DTRecHit S2: begin analysis:";
// Get the 2D rechits from the event
Handle<DTRecSegment2DCollection> segment2Ds;
event.getByLabel(segment2DLabel, segment2Ds);
recHitsPerWire_2S = map1DRecHitsPerWire(segment2Ds.product());
}
// RecHit mapping at Step 3 ---------------------------------
LogTrace("DTCalibValidation") << " -- DTRecHit S3: begin analysis:";
// Get the 4D rechits from the event
Handle<DTRecSegment4DCollection> segment4Ds;
event.getByLabel(segment4DLabel, segment4Ds);
map<DTWireId,vector<DTRecHit1D> > recHitsPerWire_3S = map1DRecHitsPerWire(segment4Ds.product());
// Loop over all 4D segments
for(DTRecSegment4DCollection::const_iterator segment = segment4Ds->begin();
segment != segment4Ds->end();
++segment) {
if(detailedAnalysis){
LogTrace("DTCalibValidation") << "Anlysis on recHit at step 1";
compute(dtGeom.product(), (*segment), recHitsPerWire_1S, 1);
LogTrace("DTCalibValidation") << "Anlysis on recHit at step 2";
compute(dtGeom.product(), (*segment), recHitsPerWire_2S, 2);
}
LogTrace("DTCalibValidation") << "Anlysis on recHit at step 3";
compute(dtGeom.product(), (*segment), recHitsPerWire_3S, 3);
}
}
| void DTCalibValidation::beginJob | ( | void | ) | [virtual] |
BeginJob.
Reimplemented from edm::EDAnalyzer.
Definition at line 59 of file DTCalibValidation.cc.
References nevent, and Parameters::parameters.
{
// the name of the rechits collection at step 1
recHits1DLabel = parameters.getUntrackedParameter<string>("recHits1DLabel");
// the name of the 2D segments
segment2DLabel = parameters.getUntrackedParameter<string>("segment2DLabel");
// the name of the 4D segments
segment4DLabel = parameters.getUntrackedParameter<string>("segment4DLabel");
// the counter of segments not used to compute residuals
wrongSegment = 0;
// the counter of segments used to compute residuals
rightSegment = 0;
// the analysis type
detailedAnalysis = parameters.getUntrackedParameter<bool>("detailedAnalysis",false);
nevent=0;
}
| void DTCalibValidation::beginRun | ( | const edm::Run & | run, |
| const edm::EventSetup & | setup | ||
| ) | [virtual] |
BeginRun.
Reimplemented from edm::EDAnalyzer.
Definition at line 78 of file DTCalibValidation.cc.
References bookHistos(), edm::EventSetup::get(), and launcher::step.
{
// get the geometry
setup.get<MuonGeometryRecord>().get(dtGeom);
// Loop over all the chambers
vector<DTChamber*>::const_iterator ch_it = dtGeom->chambers().begin();
vector<DTChamber*>::const_iterator ch_end = dtGeom->chambers().end();
for (; ch_it != ch_end; ++ch_it) {
vector<const DTSuperLayer*>::const_iterator sl_it = (*ch_it)->superLayers().begin();
vector<const DTSuperLayer*>::const_iterator sl_end = (*ch_it)->superLayers().end();
// Loop over the SLs
for(; sl_it != sl_end; ++sl_it) {
DTSuperLayerId slId = (*sl_it)->id();
if(detailedAnalysis){
// Loop over the 3 steps
for(int step = 1; step <= 3; ++step) bookHistos(slId,step);
} else {
// Only step 3
bookHistos(slId,3);
}
}
}
}
| void DTCalibValidation::bookHistos | ( | DTSuperLayerId | slId, |
| int | step | ||
| ) | [private] |
Definition at line 480 of file DTCalibValidation.cc.
References mergeVDriftHistosByStation::histos, LogTrace, DTChamberId::sector(), relativeConstraints::station, DTChamberId::station(), launcher::step, cmsPerfCommons::Step, DTSuperLayerId::superlayer(), and DTChamberId::wheel().
{
LogTrace("DTCalibValidation") << " Booking histos for SL: " << slId;
// Compose the chamber name
stringstream wheel; wheel << slId.wheel();
stringstream station; station << slId.station();
stringstream sector; sector << slId.sector();
stringstream superLayer; superLayer << slId.superlayer();
// Define the step
stringstream Step; Step << step;
string slHistoName =
"_STEP" + Step.str() +
"_W" + wheel.str() +
"_St" + station.str() +
"_Sec" + sector.str() +
"_SL" + superLayer.str();
theDbe->setCurrentFolder("DT/DTCalibValidation/Wheel" + wheel.str() +
"/Station" + station.str() +
"/Sector" + sector.str());
// Create the monitor elements
vector<MonitorElement *> histos;
// Note hte order matters
histos.push_back(theDbe->book1D("hResDist"+slHistoName,
"Residuals on the distance from wire (rec_hit - segm_extr) (cm)",
200, -0.4, 0.4));
histos.push_back(theDbe->book2D("hResDistVsDist"+slHistoName,
"Residuals on the distance (cm) from wire (rec_hit - segm_extr) vs distance (cm)",
100, 0, 2.5, 200, -0.4, 0.4));
if(detailedAnalysis){
histos.push_back(theDbe->book1D("hResPos"+slHistoName,
"Residuals on the position from wire (rec_hit - segm_extr) (cm)",
200, -0.4, 0.4));
histos.push_back(theDbe->book2D("hResPosVsPos"+slHistoName,
"Residuals on the position (cm) from wire (rec_hit - segm_extr) vs distance (cm)",
200, -2.5, 2.5, 200, -0.4, 0.4));
}
histosPerSL[make_pair(slId, step)] = histos;
}
| void DTCalibValidation::compute | ( | const DTGeometry * | dtGeom, |
| const DTRecSegment4D & | segment, | ||
| std::map< DTWireId, std::vector< type > > | recHitsPerWire, | ||
| int | step | ||
| ) | [private] |
Definition at line 350 of file DTCalibValidation.cc.
References DTGeometry::chamber(), filterCSVwithJSON::copy, funct::cos(), DTRecSegment4D::dimension(), DTGeometry::layer(), DTRecSegment4D::localDirection(), DTRecSegment4D::localPosition(), LogTrace, DTRecSegment4D::phiSegment(), DTRecSegment2D::specificRecHits(), DTLayer::specificTopology(), DTSuperLayerId::superlayer(), PV3DBase< T, PVType, FrameType >::theta(), GeomDet::toGlobal(), GeomDet::toLocal(), DTWireId::wire(), DTTopology::wirePosition(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), PV3DBase< T, PVType, FrameType >::z(), and DTRecSegment4D::zSegment().
{
bool computeResidual = true;
// Get all 1D RecHits at step 3 within the 4D segment
vector<DTRecHit1D> recHits1D_S3;
// Get 1D RecHits at Step 3 and select only events with
// 8 hits in phi and 4 hits in theta (if any)
const DTChamberRecSegment2D* phiSeg = segment.phiSegment();
if(phiSeg){
vector<DTRecHit1D> phiRecHits = phiSeg->specificRecHits();
if(phiRecHits.size() != 8) {
LogTrace("DTCalibValidation") << "[DTCalibValidation] Phi segments has: " << phiRecHits.size()
<< " hits, skipping"; // FIXME: info output
computeResidual = false;
}
copy(phiRecHits.begin(), phiRecHits.end(), back_inserter(recHits1D_S3));
}
if(!phiSeg){
LogTrace("DTCalibValidation") << " [DTCalibValidation] 4D segment has not the phi segment! ";
computeResidual = false;
}
if(segment.dimension() == 4) {
const DTSLRecSegment2D* zSeg = segment.zSegment();
if(zSeg){
vector<DTRecHit1D> zRecHits = zSeg->specificRecHits();
if(zRecHits.size() != 4) {
LogTrace("DTCalibValidation") << "[DTCalibValidation] Theta segments has: " << zRecHits.size()
<< " hits, skipping"; // FIXME: info output
computeResidual = false;
}
copy(zRecHits.begin(), zRecHits.end(), back_inserter(recHits1D_S3));
}
if(!zSeg){
LogTrace("DTCalibValidation") << " [DTCalibValidation] 4D segment has not the z segment! ";
computeResidual = false;
}
}
if(!computeResidual)
++wrongSegment;
if(computeResidual){
++rightSegment;
// Loop over 1D RecHit inside 4D segment
for(vector<DTRecHit1D>::const_iterator recHit1D = recHits1D_S3.begin();
recHit1D != recHits1D_S3.end();
++recHit1D) {
const DTWireId wireId = (*recHit1D).wireId();
// Get the layer and the wire position
const DTLayer* layer = dtGeom->layer(wireId);
float wireX = layer->specificTopology().wirePosition(wireId.wire());
// Extrapolate the segment to the z of the wire
// Get wire position in chamber RF
// (y and z must be those of the hit to be coherent in the transf. of RF in case of rotations of the layer alignment)
LocalPoint wirePosInLay(wireX,(*recHit1D).localPosition().y(),(*recHit1D).localPosition().z());
GlobalPoint wirePosGlob = layer->toGlobal(wirePosInLay);
const DTChamber* chamber = dtGeom->chamber((*recHit1D).wireId().layerId().chamberId());
LocalPoint wirePosInChamber = chamber->toLocal(wirePosGlob);
// Segment position at Wire z in chamber local frame
LocalPoint segPosAtZWire = segment.localPosition()
+ segment.localDirection()*wirePosInChamber.z()/cos(segment.localDirection().theta());
// Compute the distance of the segment from the wire
int sl = wireId.superlayer();
float SegmDistance = -1;
if(sl == 1 || sl == 3) {
// RPhi SL
SegmDistance = fabs(wirePosInChamber.x() - segPosAtZWire.x());
LogTrace("DTCalibValidation") << "SegmDistance: " << SegmDistance;
} else if(sl == 2) {
// RZ SL
SegmDistance = fabs(segPosAtZWire.y() - wirePosInChamber.y());
LogTrace("DTCalibValidation") << "SegmDistance: " << SegmDistance;
}
if(SegmDistance > 2.1)
LogTrace("DTCalibValidation") << " Warning: dist segment-wire: " << SegmDistance;
// Look for RecHits in the same cell
if(recHitsPerWire.find(wireId) == recHitsPerWire.end()) {
LogTrace("DTCalibValidation") << " No RecHit found at Step: " << step << " in cell: " << wireId;
} else {
vector<type> recHits = recHitsPerWire[wireId];
LogTrace("DTCalibValidation") << " " << recHits.size() << " RecHits, Step " << step << " in channel: " << wireId;
// Get the layer
const DTLayer* layer = dtGeom->layer(wireId);
// Find the best RecHits
const type* theBestRecHit = findBestRecHit(layer, wireId, recHits, SegmDistance);
// Compute the distance of the recHit from the wire
float recHitWireDist = recHitDistFromWire(*theBestRecHit, layer);
LogTrace("DTCalibValidation") << "recHitWireDist: " << recHitWireDist;
// Compute the residuals
float residualOnDistance = recHitWireDist - SegmDistance;
LogTrace("DTCalibValidation") << "WireId: " << wireId << " ResidualOnDistance: " << residualOnDistance;
float residualOnPosition = -1;
float recHitPos = -1;
if(sl == 1 || sl == 3) {
recHitPos = recHitPosition(*theBestRecHit, layer, chamber, segPosAtZWire.x(), sl);
residualOnPosition = recHitPos - segPosAtZWire.x();
}
else{
recHitPos = recHitPosition(*theBestRecHit, layer, chamber, segPosAtZWire.y(), sl);
residualOnPosition = recHitPos - segPosAtZWire.y();
}
LogTrace("DTCalibValidation") << "WireId: " << wireId << " ResidualOnPosition: " << residualOnPosition;
// Fill the histos
if(sl == 1 || sl == 3)
fillHistos(wireId.superlayerId(), SegmDistance, residualOnDistance, (wirePosInChamber.x() - segPosAtZWire.x()), residualOnPosition, step);
else
fillHistos(wireId.superlayerId(), SegmDistance, residualOnDistance, (wirePosInChamber.y() - segPosAtZWire.y()), residualOnPosition, step);
}
}
}
}
| void DTCalibValidation::endJob | ( | void | ) | [virtual] |
Endjob.
Reimplemented from edm::EDAnalyzer.
Definition at line 105 of file DTCalibValidation.cc.
References dumpDBToFile_GT_ttrig_cfg::outputFileName, and Parameters::parameters.
{
LogVerbatim("DTCalibValidation") << "Segments used to compute residuals: " << rightSegment;
LogVerbatim("DTCalibValidation") << "Segments not used to compute residuals: " << wrongSegment;
//theDbe->showDirStructure();
bool outputMEsInRootFile = parameters.getParameter<bool>("OutputMEsInRootFile");
std::string outputFileName = parameters.getParameter<std::string>("OutputFileName");
if(outputMEsInRootFile){
theDbe->showDirStructure();
theDbe->save(outputFileName);
}
theDbe->rmdir("DT/DTCalibValidation");
}
| void DTCalibValidation::fillHistos | ( | DTSuperLayerId | slId, |
| float | distance, | ||
| float | residualOnDistance, | ||
| float | position, | ||
| float | residualOnPosition, | ||
| int | step | ||
| ) | [private] |
Definition at line 526 of file DTCalibValidation.cc.
References mergeVDriftHistosByStation::histos.
{
// FIXME: optimization of the number of searches
vector<MonitorElement *> histos = histosPerSL[make_pair(slId,step)];
histos[0]->Fill(residualOnDistance);
histos[1]->Fill(distance, residualOnDistance);
if(detailedAnalysis){
histos[2]->Fill(residualOnPosition);
histos[3]->Fill(position, residualOnPosition);
}
}
| const type* DTCalibValidation::findBestRecHit | ( | const DTLayer * | layer, |
| DTWireId | wireId, | ||
| const vector< type > & | recHits, | ||
| const float | segmDist | ||
| ) |
Definition at line 243 of file DTCalibValidation.cc.
{
float res = 99999;
const type* theBestRecHit = 0;
// Loop over RecHits within the cell
for(typename vector<type>::const_iterator recHit = recHits.begin();
recHit != recHits.end();
++recHit) {
float distTmp = recHitDistFromWire(*recHit, layer);
if(fabs(distTmp-segmDist) < res) {
res = fabs(distTmp-segmDist);
theBestRecHit = &(*recHit);
}
} // End of loop over RecHits within the cell
return theBestRecHit;
}
| const type* DTCalibValidation::findBestRecHit | ( | const DTLayer * | layer, |
| DTWireId | wireId, | ||
| const std::vector< type > & | recHits, | ||
| const float | simHitDist | ||
| ) | [private] |
| map< DTWireId, vector< DTRecHit1DPair > > DTCalibValidation::map1DRecHitsPerWire | ( | const DTRecHitCollection * | dt1DRecHitPairs | ) | [private] |
Definition at line 179 of file DTCalibValidation.cc.
References runTheMatrix::ret.
{
map<DTWireId, vector<DTRecHit1DPair> > ret;
for(DTRecHitCollection::const_iterator rechit = dt1DRecHitPairs->begin();
rechit != dt1DRecHitPairs->end(); ++rechit) {
ret[(*rechit).wireId()].push_back(*rechit);
}
return ret;
}
| map< DTWireId, std::vector< DTRecHit1D > > DTCalibValidation::map1DRecHitsPerWire | ( | const DTRecSegment4DCollection * | segment4Ds | ) | [private] |
Definition at line 212 of file DTCalibValidation.cc.
References runTheMatrix::ret, and DTRecHit1D::wireId().
{
map<DTWireId, vector<DTRecHit1D> > ret;
// Loop over all 4D segments
for(DTRecSegment4DCollection::const_iterator segment = segment4Ds->begin();
segment != segment4Ds->end();
++segment) {
// Get component 2D segments
vector<const TrackingRecHit*> segment2Ds = (*segment).recHits();
// Loop over 2D segments:
for(vector<const TrackingRecHit*>::const_iterator segment2D = segment2Ds.begin();
segment2D != segment2Ds.end();
++segment2D) {
// Get 1D component rechits
vector<const TrackingRecHit*> hits = (*segment2D)->recHits();
// Loop over them
for(vector<const TrackingRecHit*>::const_iterator hit = hits.begin();
hit != hits.end(); ++hit) {
const DTRecHit1D* hit1D = dynamic_cast<const DTRecHit1D*>(*hit);
ret[hit1D->wireId()].push_back(*hit1D);
}
}
}
return ret;
}
| map< DTWireId, vector< DTRecHit1D > > DTCalibValidation::map1DRecHitsPerWire | ( | const DTRecSegment2DCollection * | segment2Ds | ) | [private] |
Definition at line 193 of file DTCalibValidation.cc.
References runTheMatrix::ret.
{
map<DTWireId, vector<DTRecHit1D> > ret;
// Loop over all 2D segments
for(DTRecSegment2DCollection::const_iterator segment = segment2Ds->begin();
segment != segment2Ds->end();
++segment) {
vector<DTRecHit1D> component1DHits= (*segment).specificRecHits();
// Loop over all component 1D hits
for(vector<DTRecHit1D>::const_iterator hit = component1DHits.begin();
hit != component1DHits.end(); ++hit) {
ret[(*hit).wireId()].push_back(*hit);
}
}
return ret;
}
| float DTCalibValidation::recHitDistFromWire | ( | const DTRecHit1DPair & | hitPair, |
| const DTLayer * | layer | ||
| ) | [private] |
Definition at line 266 of file DTCalibValidation.cc.
References DTEnums::Left, DTRecHit1DPair::localPosition(), DTEnums::Right, and PV3DBase< T, PVType, FrameType >::x().
{
return fabs(hitPair.localPosition(DTEnums::Left).x() -
hitPair.localPosition(DTEnums::Right).x())/2.;
}
| float DTCalibValidation::recHitDistFromWire | ( | const DTRecHit1D & | recHit, |
| const DTLayer * | layer | ||
| ) | [private] |
Definition at line 274 of file DTCalibValidation.cc.
References DTRecHit1D::localPosition(), DTLayer::specificTopology(), DTWireId::wire(), DTRecHit1D::wireId(), DTTopology::wirePosition(), and PV3DBase< T, PVType, FrameType >::x().
{
return fabs(recHit.localPosition().x() - layer->specificTopology().wirePosition(recHit.wireId().wire()));
//to check the compatibility position / distance
/* // Get the recHit and the wire position
const DTChamber* chamber = (*layer).chamber();
GlobalPoint recHitPosGlob = layer->toGlobal(recHit.localPosition());
LocalPoint recHitPosInChamber = chamber->toLocal(recHitPosGlob);
float wireX = layer->specificTopology().wirePosition(recHit.wireId().wire());
LocalPoint wirePosInLay(wireX,recHit.localPosition().y(),0);
GlobalPoint wirePosGlob = layer->toGlobal(wirePosInLay);
LocalPoint wirePosInChamber = chamber->toLocal(wirePosGlob);
float recHitDist = -1;
if(recHit.wireId().layerId().superlayerId().superlayer() != 2)
recHitDist = fabs(recHitPosInChamber.x()-wirePosInChamber.x());
else
recHitDist = fabs(recHitPosInChamber.y()-wirePosInChamber.y());
return recHitDist; */
}
| float DTCalibValidation::recHitPosition | ( | const DTRecHit1D & | recHit, |
| const DTLayer * | layer, | ||
| const DTChamber * | chamber, | ||
| float | segmPos, | ||
| int | sl | ||
| ) | [private] |
Definition at line 330 of file DTCalibValidation.cc.
References DTRecHit1D::localPosition(), GeomDet::toGlobal(), GeomDet::toLocal(), PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().
{
// Get the layer and the wire position
GlobalPoint recHitPosGlob = layer->toGlobal(recHit.localPosition());
LocalPoint recHitPosInChamber = chamber->toLocal(recHitPosGlob);
float recHitPos = -1;
if(sl != 2)
recHitPos = recHitPosInChamber.x();
else
recHitPos = recHitPosInChamber.y();
return recHitPos;
}
| float DTCalibValidation::recHitPosition | ( | const DTRecHit1DPair & | hitPair, |
| const DTLayer * | layer, | ||
| const DTChamber * | chamber, | ||
| float | segmPos, | ||
| int | sl | ||
| ) | [private] |
Definition at line 302 of file DTCalibValidation.cc.
References DTEnums::Left, DTRecHit1DPair::localPosition(), DTEnums::Right, GeomDet::toGlobal(), GeomDet::toLocal(), PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().
{
// Get the layer and the wire position
GlobalPoint hitPosGlob_right = layer->toGlobal(hitPair.localPosition(DTEnums::Right));
LocalPoint hitPosInChamber_right = chamber->toLocal(hitPosGlob_right);
GlobalPoint hitPosGlob_left = layer->toGlobal(hitPair.localPosition(DTEnums::Left));
LocalPoint hitPosInChamber_left = chamber->toLocal(hitPosGlob_left);
float recHitPos=-1;
if(sl != 2){
if(fabs(hitPosInChamber_left.x()-segmentPos)<fabs(hitPosInChamber_right.x()-segmentPos))
recHitPos = hitPosInChamber_left.x();
else
recHitPos = hitPosInChamber_right.x();
}
else{
if(fabs(hitPosInChamber_left.y()-segmentPos)<fabs(hitPosInChamber_right.y()-segmentPos))
recHitPos = hitPosInChamber_left.y();
else
recHitPos = hitPosInChamber_right.y();
}
return recHitPos;
}
bool DTCalibValidation::detailedAnalysis [private] |
Definition at line 77 of file DTCalibValidation.h.
edm::ESHandle<DTGeometry> DTCalibValidation::dtGeom [private] |
Definition at line 79 of file DTCalibValidation.h.
std::map<std::pair<DTSuperLayerId,int>, std::vector<MonitorElement*> > DTCalibValidation::histosPerSL [private] |
Definition at line 133 of file DTCalibValidation.h.
int DTCalibValidation::nevent [private] |
Definition at line 75 of file DTCalibValidation.h.
Definition at line 72 of file DTCalibValidation.h.
std::string DTCalibValidation::recHits1DLabel [private] |
Definition at line 82 of file DTCalibValidation.h.
int DTCalibValidation::rightSegment [private] |
Definition at line 74 of file DTCalibValidation.h.
std::string DTCalibValidation::segment2DLabel [private] |
Definition at line 84 of file DTCalibValidation.h.
std::string DTCalibValidation::segment4DLabel [private] |
Definition at line 86 of file DTCalibValidation.h.
DQMStore* DTCalibValidation::theDbe [private] |
Definition at line 66 of file DTCalibValidation.h.
int DTCalibValidation::wrongSegment [private] |
Definition at line 73 of file DTCalibValidation.h.
1.7.3