/data/refman/pasoursint/CMSSW_5_3_3/src/L1Trigger/CSCTriggerPrimitives/src/CSCCathodeLCTProcessor.cc

Go to the documentation of this file.

//-----------------------------------------------------------------------------
//
//   Class: CSCCathodeLCTProcessor
//
//   Description: 
//     This class simulates the functionality of the cathode LCT card.  It is
//     run by the MotherBoard and returns up to two CathodeLCTs. It can be
//     run either in a test mode, where it is passed arrays of halfstrip
//     and distrip times, or in normal mode where it determines
//     the time and comparator information from the comparator digis.
//
//     Additional comments by Jason Mumford 01/31/01 (mumford@physics.ucla.edu)
//     Removed the card boundaries.  Changed the Pretrigger to emulate
//     the hardware electronic logic.  Also changed the keylayer to be the 4th
//     layer in a chamber instead of the 3rd layer from the interaction region.
//     The code is a more realistic simulation of hardware LCT logic now.
//
//   Author List: Benn Tannenbaum (1999), Jason Mumford (2001-2), Slava Valuev.
//                Porting from ORCA by S. Valuev (Slava.Valuev@cern.ch),
//                May 2006.
//
//   $Date: 2010/08/04 14:50:11 $
//   $Revision: 1.43 $
//
//   Modifications: 
//
//-----------------------------------------------------------------------------

#include <L1Trigger/CSCTriggerPrimitives/src/CSCCathodeLCTProcessor.h>
#include <L1Trigger/CSCCommonTrigger/interface/CSCTriggerGeometry.h>
#include <DataFormats/MuonDetId/interface/CSCTriggerNumbering.h>

#include <FWCore/MessageLogger/interface/MessageLogger.h>
#include <algorithm>
#include <iomanip>
#include <iostream>

//-----------------
// Static variables
//-----------------

// This is the strip pattern that we use for pretrigger.
// pre_hit_pattern[0][i] = layer. pre_hit_pattern[1][i] = key_strip offset.
const int CSCCathodeLCTProcessor::pre_hit_pattern[2][NUM_PATTERN_STRIPS] = {
  { 999,  0,  0,  0,  999,
    999,  1,  1,  1,  999,
    999,  2,  2,  2,  999,
              3,                // layer
    999,  4,  4,  4,  999,
    999,  5,  5,  5,  999},
  //-------------------------------------------
  { 999, -1,  0,  1,  999,
    999, -1,  0,  1,  999,
    999, -1,  0,  1,  999,
              0,                // offset
    999, -1,  0,  1,  999,
    999, -1,  0,  1,  999}
};

// The old set of half-strip/di-strip patterns used prior to 2007.
// For the given pattern, set the unused parts of the pattern to 999.
// Pattern[i][NUM_PATTERN_STRIPS] contains pt bend value. JM
// bend of 0 is left/straight and bend of 1 is right bht 21 June 2001
// note that the left/right-ness of this is exactly opposite of what one would
// expect naively (at least it was for me). The only way to make sure you've
// got the patterns you want is to use the printPatterns() method to dump
// them. BHT 21 June 2001
const int CSCCathodeLCTProcessor::pattern[CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07][NUM_PATTERN_STRIPS+1] = {
  { 999, 999, 999, 999, 999,
    999, 999, 999, 999, 999,
    999, 999, 999, 999, 999,
              999,            // dummy (reserved)
    999, 999, 999, 999, 999,
    999, 999, 999, 999, 999, 0},
  //-------------------------------------------------------------
  { 999, 999, 999,   0, 999,
    999, 999, 999,   1, 999,
    999, 999,   2,   2, 999,
                3,            // right bending pattern (large)
    999,   4,   4, 999, 999,
    999,   5, 999, 999, 999, 1},
  //-------------------------------------------------------------
  { 999,   0, 999, 999, 999,
    999,   1, 999, 999, 999,
    999,   2,   2, 999, 999,
                3,            // left bending pattern (large)
    999, 999,   4,   4, 999,
    999, 999, 999,   5, 999, 0},
  //-------------------------------------------------------------
  { 999, 999,   0, 999, 999,
    999, 999,   1, 999, 999,
    999, 999,   2, 999, 999,
                3,            // right bending pattern (medium)
    999,   4, 999, 999, 999,
    999,   5, 999, 999, 999, 1},
  //-------------------------------------------------------------
  { 999, 999,   0, 999, 999,
    999, 999,   1, 999, 999,
    999, 999,   2, 999, 999,
                3,            // left bending pattern (medium)
    999, 999, 999,   4, 999,
    999, 999, 999,   5, 999, 0},
  //-------------------------------------------------------------
  { 999, 999, 999,   0, 999,
    999, 999, 999,   1, 999,
    999, 999,   2,   2, 999,
                3,            // right bending pattern (small)
    999, 999,   4, 999, 999,
    999, 999,   5, 999, 999, 1},
  //-------------------------------------------------------------
  { 999,   0, 999, 999, 999,
    999,   1, 999, 999, 999,
    999,   2,   2, 999, 999,
                3,            // left bending pattern (small)
    999, 999,   4, 999, 999,
    999, 999,   5, 999, 999, 0},
  //-------------------------------------------------------------
  { 999, 999,   0, 999, 999,
    999, 999,   1, 999, 999,
    999, 999,   2, 999, 999,
                3,            // straight through pattern
    999, 999,   4, 999, 999,
    999, 999,   5, 999, 999, 1}
};

// New set of halfstrip patterns for 2007 version of the algorithm.
// For the given pattern, set the unused parts of the pattern to 999.
// Pattern[i][NUM_PATTERN_HALFSTRIPS] contains bend direction.
// Bend of 0 is right/straight and bend of 1 is left.
const int CSCCathodeLCTProcessor::pattern2007_offset[NUM_PATTERN_HALFSTRIPS] =
  {  -5,  -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,   5,
                    -2,  -1,   0,   1,   2,
                               0,
                    -2,  -1,   0,   1,   2,
          -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,
     -5,  -4,  -3,  -2,  -1,   0,   1,   2,   3,   4,   5 };

const int CSCCathodeLCTProcessor::pattern2007[CSCConstants::NUM_CLCT_PATTERNS][NUM_PATTERN_HALFSTRIPS+1] = {
  { 999, 999, 999, 999, 999, 999, 999, 999, 999, 999, 999,
                   999, 999, 999, 999, 999,
                             999,             // pid=0: no pattern found
                   999, 999, 999, 999, 999,
         999, 999, 999, 999, 999, 999, 999, 999, 999,
    999, 999, 999, 999, 999, 999, 999, 999, 999, 999, 999, -1},
  //-------------------------------------------------------------
  {   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
                     1,   1,   1,   1,   1,
                               2,             // pid=1: layer-OR trigger
                     3,   3,   3,   3,   3,
           4,   4,   4,   4,   4,   4,   4,   4,   4,
      5,   5,   5,   5,   5,   5,   5,   5,   5,   5,   5, -1},
  //-------------------------------------------------------------
  { 999, 999, 999, 999, 999, 999, 999, 999,   0,   0,   0,
                   999, 999, 999,   1,   1,
                               2,             // pid=2: right-bending (large)
                     3,   3,   3, 999, 999,
           4,   4,   4, 999, 999, 999, 999, 999, 999,
      5,   5,   5, 999, 999, 999, 999, 999, 999, 999, 999,  0},
  //-------------------------------------------------------------
  {   0,   0,   0, 999, 999, 999, 999, 999, 999, 999, 999,
                     1,   1, 999, 999, 999,
                               2,             // pid=3: left-bending (large)
                   999, 999,   3,   3,   3,
         999, 999, 999, 999, 999, 999,   4,   4,   4,
    999, 999, 999, 999, 999, 999, 999, 999,   5,   5,   5,  1},
  //-------------------------------------------------------------
  { 999, 999, 999, 999, 999, 999, 999,   0,   0,   0, 999,
                   999, 999, 999,   1,   1,
                               2,             // pid=4: right-bending (medium)
                     3,   3, 999, 999, 999,
           4,   4,   4, 999, 999, 999, 999, 999, 999,
    999,   5,   5,   5, 999, 999, 999, 999, 999, 999, 999,  0},
  //-------------------------------------------------------------
  { 999,   0,   0,   0, 999, 999, 999, 999, 999, 999, 999,
                     1,   1, 999, 999, 999,
                               2,             // pid=5: left-bending (medium)
                   999, 999, 999,   3,   3,
         999, 999, 999, 999, 999, 999,   4,   4,   4,
    999, 999, 999, 999, 999, 999, 999,   5,   5,   5, 999,  1},
  //-------------------------------------------------------------
  { 999, 999, 999, 999, 999, 999,   0,   0,   0, 999, 999,
                   999, 999,   1,   1, 999,
                               2,             // pid=6: right-bending (medium)
                   999,   3,   3, 999, 999,
         999, 999,   4,   4, 999, 999, 999, 999, 999,
    999, 999,   5,   5,   5, 999, 999, 999, 999, 999, 999,  0},
  //-------------------------------------------------------------
  { 999, 999,   0,   0,   0, 999, 999, 999, 999, 999, 999,
                   999,   1,   1, 999, 999,
                               2,             // pid=7: left-bending (medium)
                   999, 999,   3,   3, 999,
         999, 999, 999, 999, 999,   4,   4, 999, 999,
    999, 999, 999, 999, 999, 999,   5,   5,   5, 999, 999,  1},
  //-------------------------------------------------------------
  { 999, 999, 999, 999, 999,   0,   0,   0, 999, 999, 999,
                   999, 999,   1,   1, 999,
                               2,             // pid=8: right-bending (small)
                   999,   3,   3, 999, 999,
         999, 999,   4,   4,   4, 999, 999, 999, 999,
    999, 999, 999,   5,   5,   5, 999, 999, 999, 999, 999,  0},
  //-------------------------------------------------------------
  { 999, 999, 999,   0,   0,   0, 999, 999, 999, 999, 999,
                   999,   1,   1, 999, 999,
                               2,             // pid=9: left-bending (small)
                   999, 999,   3,   3, 999,
         999, 999, 999, 999,   4,   4,   4, 999, 999,
    999, 999, 999, 999, 999,   5,   5,   5, 999, 999, 999,  1},
  //-------------------------------------------------------------
  { 999, 999, 999, 999,   0,   0,   0, 999, 999, 999, 999,
                   999, 999,   1, 999, 999,
                               2,             // pid=A: straight-through
                   999, 999,   3, 999, 999,
         999, 999, 999,   4,   4,   4, 999, 999, 999,
    999, 999, 999, 999,   5,   5,   5, 999, 999, 999, 999,  0}
                                              // pid's=B-F are not yet defined
};

// Default values of configuration parameters.
const unsigned int CSCCathodeLCTProcessor::def_fifo_tbins   = 12;
const unsigned int CSCCathodeLCTProcessor::def_fifo_pretrig =  7;
const unsigned int CSCCathodeLCTProcessor::def_hit_persist  =  6;
const unsigned int CSCCathodeLCTProcessor::def_drift_delay  =  2;
const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pretrig =  2;
const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pattern =  4;
const unsigned int CSCCathodeLCTProcessor::def_pid_thresh_pretrig  =  2;
const unsigned int CSCCathodeLCTProcessor::def_min_separation      = 10;

// Number of di-strips/half-strips per CFEB.
const int CSCCathodeLCTProcessor::cfeb_strips[2] = { 8, 32};

//----------------
// Constructors --
//----------------

CSCCathodeLCTProcessor::CSCCathodeLCTProcessor(unsigned endcap,
                                               unsigned station,
                                               unsigned sector,
                                               unsigned subsector,
                                               unsigned chamber,
                                               const edm::ParameterSet& conf,
                                               const edm::ParameterSet& comm) :
                     theEndcap(endcap), theStation(station), theSector(sector),
                     theSubsector(subsector), theTrigChamber(chamber) {
  static bool config_dumped = false;

  // CLCT configuration parameters.
  fifo_tbins   = conf.getParameter<unsigned int>("clctFifoTbins");
  hit_persist  = conf.getParameter<unsigned int>("clctHitPersist");
  drift_delay  = conf.getParameter<unsigned int>("clctDriftDelay");
  nplanes_hit_pretrig =
    conf.getParameter<unsigned int>("clctNplanesHitPretrig");
  nplanes_hit_pattern =
    conf.getParameter<unsigned int>("clctNplanesHitPattern");

  // Not used yet.
  fifo_pretrig = conf.getParameter<unsigned int>("clctFifoPretrig");

  // Defines pre-2007 version of the CLCT algorithm used in test beams and
  // MTCC.
  isMTCC       = comm.getParameter<bool>("isMTCC");

  // TMB07 firmware used since 2007: switch and config. parameters.
  isTMB07      = comm.getParameter<bool>("isTMB07");
  if (isTMB07) {
    pid_thresh_pretrig =
      conf.getParameter<unsigned int>("clctPidThreshPretrig");
    min_separation    =
      conf.getParameter<unsigned int>("clctMinSeparation");
  }

  // Verbosity level, set to 0 (no print) by default.
  infoV        = conf.getUntrackedParameter<int>("verbosity", 0);

  // Check and print configuration parameters.
  checkConfigParameters();
  if (infoV > 0 && !config_dumped) {
    dumpConfigParams();
    config_dumped = true;
  }

  numStrips = 0; // Will be set later.
  // Provisional, but should be OK for all stations except ME1.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    if ((i_layer+1)%2 == 0) stagger[i_layer] = 0;
    else                    stagger[i_layer] = 1;
  }

  // engage in various and sundry tests, but only for a single chamber.
  //if (theStation == 2 && theSector == 1 &&
  //    CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber) == 1 && 
  //    CSCTriggerNumbering::chamberFromTriggerLabels(theSector, theSubsector,
  //                                                theStation, theTrigChamber) == 1) {
    // test all possible patterns in our uber pattern. 
    // testPatterns();
    // this tests to make sure what goes into an LCT is what comes out
    // testLCTs();
    // print out all the patterns to make sure we've got what we think
    // we've got.
    // printPatterns();
  //  }
}

CSCCathodeLCTProcessor::CSCCathodeLCTProcessor() :
                     theEndcap(1), theStation(1), theSector(1),
                     theSubsector(1), theTrigChamber(1) {
  // constructor for debugging.
  static bool config_dumped = false;

  // CLCT configuration parameters.
  setDefaultConfigParameters();
  infoV =  2;
  isMTCC  = false;
  isTMB07 = true;

  // Check and print configuration parameters.
  checkConfigParameters();
  if (!config_dumped) {
    dumpConfigParams();
    config_dumped = true;
  }

  numStrips = CSCConstants::MAX_NUM_STRIPS;
  // Should be OK for all stations except ME1.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    if ((i_layer+1)%2 == 0) stagger[i_layer] = 0;
    else                    stagger[i_layer] = 1;
  }
}

void CSCCathodeLCTProcessor::setDefaultConfigParameters() {
  // Set default values for configuration parameters.
  fifo_tbins   = def_fifo_tbins;
  fifo_pretrig = def_fifo_pretrig;
  hit_persist  = def_hit_persist;
  drift_delay  = def_drift_delay;
  nplanes_hit_pretrig = def_nplanes_hit_pretrig;
  nplanes_hit_pattern = def_nplanes_hit_pattern;

  isMTCC = false;

  // New TMB07 parameters.
  isTMB07 = true;
  if (isTMB07) {
    pid_thresh_pretrig = def_pid_thresh_pretrig;
    min_separation     = def_min_separation;
  }
}

// Set configuration parameters obtained via EventSetup mechanism.
void CSCCathodeLCTProcessor::setConfigParameters(const CSCDBL1TPParameters* conf) {
  static bool config_dumped = false;

  fifo_tbins   = conf->clctFifoTbins();
  fifo_pretrig = conf->clctFifoPretrig();
  hit_persist  = conf->clctHitPersist();
  drift_delay  = conf->clctDriftDelay();
  nplanes_hit_pretrig = conf->clctNplanesHitPretrig();
  nplanes_hit_pattern = conf->clctNplanesHitPattern();

  // TMB07 parameters.
  if (isTMB07) {
    pid_thresh_pretrig = conf->clctPidThreshPretrig();
    min_separation     = conf->clctMinSeparation();
  }

  // Check and print configuration parameters.
  checkConfigParameters();
  if (!config_dumped) {
    dumpConfigParams();
    config_dumped = true;
  }
}

void CSCCathodeLCTProcessor::checkConfigParameters() {
  // Make sure that the parameter values are within the allowed range.

  // Max expected values.
  static const unsigned int max_fifo_tbins   = 1 << 5;
  static const unsigned int max_fifo_pretrig = 1 << 5;
  static const unsigned int max_hit_persist  = 1 << 4;
  static const unsigned int max_drift_delay  = 1 << 2;
  static const unsigned int max_nplanes_hit_pretrig = 1 << 3;
  static const unsigned int max_nplanes_hit_pattern = 1 << 3;
  static const unsigned int max_pid_thresh_pretrig  = 1 << 4;
  static const unsigned int max_min_separation = CSCConstants::NUM_HALF_STRIPS;

  // Checks.
  if (fifo_tbins >= max_fifo_tbins) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of fifo_tbins, " << fifo_tbins
      << ", exceeds max allowed, " << max_fifo_tbins-1 << " +++\n"
      << "+++ Try to proceed with the default value, fifo_tbins="
      << def_fifo_tbins << " +++\n";
    fifo_tbins = def_fifo_tbins;
  }
  if (fifo_pretrig >= max_fifo_pretrig) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of fifo_pretrig, " << fifo_pretrig
      << ", exceeds max allowed, " << max_fifo_pretrig-1 << " +++\n"
      << "+++ Try to proceed with the default value, fifo_pretrig="
      << def_fifo_pretrig << " +++\n";
    fifo_pretrig = def_fifo_pretrig;
  }
  if (hit_persist >= max_hit_persist) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of hit_persist, " << hit_persist
      << ", exceeds max allowed, " << max_hit_persist-1 << " +++\n"
      << "+++ Try to proceed with the default value, hit_persist="
      << def_hit_persist << " +++\n";
    hit_persist = def_hit_persist;
  }
  if (drift_delay >= max_drift_delay) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of drift_delay, " << drift_delay
      << ", exceeds max allowed, " << max_drift_delay-1 << " +++\n"
      << "+++ Try to proceed with the default value, drift_delay="
      << def_drift_delay << " +++\n";
    drift_delay = def_drift_delay;
  }
  if (nplanes_hit_pretrig >= max_nplanes_hit_pretrig) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of nplanes_hit_pretrig, " << nplanes_hit_pretrig
      << ", exceeds max allowed, " << max_nplanes_hit_pretrig-1 << " +++\n"
      << "+++ Try to proceed with the default value, nplanes_hit_pretrig="
      << def_nplanes_hit_pretrig << " +++\n";
    nplanes_hit_pretrig = def_nplanes_hit_pretrig;
  }
  if (nplanes_hit_pattern >= max_nplanes_hit_pattern) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << "+++ Value of nplanes_hit_pattern, " << nplanes_hit_pattern
      << ", exceeds max allowed, " << max_nplanes_hit_pattern-1 << " +++\n"
      << "+++ Try to proceed with the default value, nplanes_hit_pattern="
      << def_nplanes_hit_pattern << " +++\n";
    nplanes_hit_pattern = def_nplanes_hit_pattern;
  }

  if (isTMB07) {
    if (pid_thresh_pretrig >= max_pid_thresh_pretrig) {
      if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
        << "+++ Value of pid_thresh_pretrig, " << pid_thresh_pretrig
        << ", exceeds max allowed, " << max_pid_thresh_pretrig-1 << " +++\n"
        << "+++ Try to proceed with the default value, pid_thresh_pretrig="
        << def_pid_thresh_pretrig << " +++\n";
      pid_thresh_pretrig = def_pid_thresh_pretrig;
    }
    if (min_separation >= max_min_separation) {
      if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
        << "+++ Value of min_separation, " << min_separation
        << ", exceeds max allowed, " << max_min_separation-1 << " +++\n"
        << "+++ Try to proceed with the default value, min_separation="
        << def_min_separation << " +++\n";
      min_separation = def_min_separation;
    }
  }
}

void CSCCathodeLCTProcessor::clear() {
  thePreTriggerBXs.clear();
  for (int bx = 0; bx < MAX_CLCT_BINS; bx++) {
    bestCLCT[bx].clear();
    secondCLCT[bx].clear();
  }
}

std::vector<CSCCLCTDigi>
CSCCathodeLCTProcessor::run(const CSCComparatorDigiCollection* compdc) {
  // This is the version of the run() function that is called when running
  // over the entire detector.  It gets the comparator & timing info from the
  // comparator digis and then passes them on to another run() function.

  // clear(); // redundant; called by L1MuCSCMotherboard.

  // Get the number of strips and stagger of layers for the given chamber.
  // Do it only once per chamber.
  if (numStrips == 0) {
    CSCTriggerGeomManager* theGeom = CSCTriggerGeometry::get();
    CSCChamber* theChamber = theGeom->chamber(theEndcap, theStation, theSector,
                                              theSubsector, theTrigChamber);
    if (theChamber) {
      numStrips = theChamber->layer(1)->geometry()->numberOfStrips();
      // ME1/a is known to the readout hardware as strips 65-80 of ME1/1.
      // Still need to decide whether we do any special adjustments to
      // reconstruct LCTs in this region (3:1 ganged strips); for now, we
      // simply allow for hits in ME1/a and apply standard reconstruction
      // to them.
      if (theStation == 1 &&
          CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                     theTrigChamber) == 1) {
        numStrips = 80;
      }

      if (numStrips > CSCConstants::MAX_NUM_STRIPS) {
        if (infoV >= 0) edm::LogError("L1CSCTPEmulatorSetupError")
          << "+++ Number of strips, " << numStrips
          << " found in ME" << ((theEndcap == 1) ? "+" : "-")
          << theStation << "/"
          << CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                        theTrigChamber) << "/"
          << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                              theSubsector, theStation, theTrigChamber)
          << " (sector " << theSector << " subsector " << theSubsector
          << " trig id. " << theTrigChamber << ")"
          << " exceeds max expected, " << CSCConstants::MAX_NUM_STRIPS
          << " +++\n" 
          << "+++ CSC geometry looks garbled; no emulation possible +++\n";
        numStrips = -1;
      }
      // The strips for a given layer may be offset from the adjacent layers.
      // This was done in order to improve resolution.  We need to find the
      // 'staggering' for each layer and make necessary conversions in our
      // arrays.  -JM
      // In the TMB-07 firmware, half-strips in odd layers (layers are
      // counted as ly0-ly5) are shifted by -1 half-strip, whereas in
      // the previous firmware versions half-strips in even layers
      // were shifted by +1 half-strip.  This difference is due to a
      // change from ly3 to ly2 in the choice of the key layer, and
      // the intention to keep half-strips in the key layer unchanged.
      // In the emulator, we use the old way for both cases, to avoid
      // negative half-strip numbers.  This will necessitate a
      // subtraction of 1 half-strip for TMB-07 later on. -SV.
      for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
        stagger[i_layer] =
          (theChamber->layer(i_layer+1)->geometry()->stagger() + 1) / 2;
      }
    }
    else {
      if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
        << " ME" << ((theEndcap == 1) ? "+" : "-") << theStation << "/"
        << CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                      theTrigChamber) << "/"
        << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                            theSubsector, theStation, theTrigChamber)
        << " (sector " << theSector << " subsector " << theSubsector
        << " trig id. " << theTrigChamber << ")"
        << " is not defined in current geometry! +++\n"
        << "+++ CSC geometry looks garbled; no emulation possible +++\n";
      numStrips = -1;
    }
  }

  if (numStrips < 0) {
    if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
      << " ME" << ((theEndcap == 1) ? "+" : "-") << theStation << "/"
      << CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                    theTrigChamber) << "/"
      << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                          theSubsector, theStation, theTrigChamber)
      << " (sector " << theSector << " subsector " << theSubsector
      << " trig id. " << theTrigChamber << "):"
      << " numStrips = " << numStrips << "; CLCT emulation skipped! +++";
    std::vector<CSCCLCTDigi> emptyV;
    return emptyV;
  }

  // Get comparator digis in this chamber.
  bool noDigis = getDigis(compdc);

  if (!noDigis) {
    // Get halfstrip (and possibly distrip) times from comparator digis.
    std::vector<int>
      halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS];
    std::vector<int>
      distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS];
    if (isTMB07) { // TMB07 (latest) version: halfstrips only.
      readComparatorDigis(halfstrip);
    }
    else { // Earlier versions: halfstrips and distrips.
      readComparatorDigis(halfstrip, distrip);
    }

    // Pass arrays of halfstrips and distrips on to another run() doing the
    // LCT search.
    // If the number of layers containing digis is smaller than that
    // required to trigger, quit right away.  (If LCT-based digi suppression
    // is implemented one day, this condition will have to be changed
    // to the number of planes required to pre-trigger.)
    unsigned int layersHit = 0;
    for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
      for (int i_hstrip = 0; i_hstrip < CSCConstants::NUM_HALF_STRIPS;
           i_hstrip++) {
        if (!halfstrip[i_layer][i_hstrip].empty()) {layersHit++; break;}
      }
    }
    if (layersHit >= nplanes_hit_pattern) run(halfstrip, distrip);
  }

  // Return vector of CLCTs.
  std::vector<CSCCLCTDigi> tmpV = getCLCTs();
  return tmpV;
}

void CSCCathodeLCTProcessor::run(
  const std::vector<int> halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
  const std::vector<int> distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  // This version of the run() function can either be called in a standalone
  // test, being passed the halfstrip and distrip times, or called by the 
  // run() function above.  It uses the findLCTs() method to find vectors
  // of LCT candidates. These candidates are sorted and the best two per bx
  // are returned.
  std::vector<CSCCLCTDigi> LCTlist;

  if (isTMB07) { // TMB07 (latest) version of the CLCT algorithm.
    LCTlist = findLCTs(halfstrip);
  }
  else if (isMTCC) { // MTCC version.
    LCTlist = findLCTs(halfstrip, distrip);
  }
  else { // Idealized algorithm of many years ago.
    std::vector<CSCCLCTDigi> halfStripLCTs = findLCTs(halfstrip, 1);
    std::vector<CSCCLCTDigi> diStripLCTs   = findLCTs(distrip,   0);
    // Put all the candidates into a single vector and sort them.
    for (unsigned int i = 0; i < halfStripLCTs.size(); i++)
      LCTlist.push_back(halfStripLCTs[i]);
    for (unsigned int i = 0; i < diStripLCTs.size(); i++)
      LCTlist.push_back(diStripLCTs[i]);
  }

  // LCT sorting.
  if (LCTlist.size() > 1)
    sort(LCTlist.begin(), LCTlist.end(), std::greater<CSCCLCTDigi>());

  // Take the best two candidates per bx.
  for (std::vector<CSCCLCTDigi>::const_iterator plct = LCTlist.begin();
       plct != LCTlist.end(); plct++) {
    int bx = plct->getBX();
    if (bx >= MAX_CLCT_BINS) {
      if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeCLCT")
        << "+++ Bx of CLCT candidate, " << bx << ", exceeds max allowed, "
        << MAX_CLCT_BINS-1 << "; skipping it... +++\n";
      continue;
    }

    if (!bestCLCT[bx].isValid()) bestCLCT[bx] = *plct;
    else if (!secondCLCT[bx].isValid()) {
      // Ignore CLCT if it is the same as the best (i.e. if the same
      // CLCT was found in both half- and di-strip pattern search).
      // This can never happen in the test beam and MTCC
      // implementations.
      if (!isMTCC && !isTMB07 && *plct == bestCLCT[bx]) continue;
      secondCLCT[bx] = *plct;
    }
  }

  for (int bx = 0; bx < MAX_CLCT_BINS; bx++) {
    if (bestCLCT[bx].isValid()) {
      bestCLCT[bx].setTrknmb(1);
      if (infoV > 0) LogDebug("CSCCathodeLCTProcessor")
        << bestCLCT[bx] << " found in ME" << ((theEndcap == 1) ? "+" : "-")
        << theStation << "/"
        << CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                      theTrigChamber) << "/"
        << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                            theSubsector, theStation, theTrigChamber)
        << " (sector " << theSector << " subsector " << theSubsector
        << " trig id. " << theTrigChamber << ")" << "\n";
    }
    if (secondCLCT[bx].isValid()) {
      secondCLCT[bx].setTrknmb(2);
      if (infoV > 0) LogDebug("CSCCathodeLCTProcessor")
        << secondCLCT[bx] << " found in ME" << ((theEndcap == 1) ? "+" : "-")
        << theStation << "/"
        << CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                      theTrigChamber) << "/"
        << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                            theSubsector, theStation, theTrigChamber)
        << " (sector " << theSector << " subsector " << theSubsector
        << " trig id. " << theTrigChamber << ")" << "\n";
    }
  }
  // Now that we have our best CLCTs, they get correlated with the best
  // ALCTs and then get sent to the MotherBoard.  -JM
}

bool CSCCathodeLCTProcessor::getDigis(const CSCComparatorDigiCollection* compdc) {
  bool noDigis = true;
  int  theRing    = CSCTriggerNumbering::ringFromTriggerLabels(theStation,
                                                               theTrigChamber);
  int  theChamber = CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                                     theSubsector, theStation, theTrigChamber);

  // Loop over layers and save comparator digis on each one into digiV[layer].
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    digiV[i_layer].clear();
    
    CSCDetId detid(theEndcap, theStation, theRing, theChamber, i_layer+1);
    getDigis(compdc, detid);

    // If this is ME1/1, fetch digis in corresponding ME1/A (ring=4) as well.
    if (theStation == 1 && theRing == 1) {
      CSCDetId detid_me1a(theEndcap, theStation, 4, theChamber, i_layer+1);
      getDigis(compdc, detid_me1a);
    }

    if (!digiV[i_layer].empty()) {
      noDigis = false;
      if (infoV > 1) {
        LogTrace("CSCCathodeLCTProcessor")
          << "found " << digiV[i_layer].size()
          << " comparator digi(s) in layer " << i_layer << " of ME"
          << ((theEndcap == 1) ? "+" : "-") << theStation << "/" << theRing
          << "/" << theChamber << " (trig. sector " << theSector
          << " subsector " << theSubsector << " id " << theTrigChamber << ")";
      }
    }
  }

  return noDigis;
}

void CSCCathodeLCTProcessor::getDigis(const CSCComparatorDigiCollection* compdc,
                                      const CSCDetId& id) {
  bool me1a = (id.station() == 1) && (id.ring() == 4);
  const CSCComparatorDigiCollection::Range rcompd = compdc->get(id);
  for (CSCComparatorDigiCollection::const_iterator digiIt = rcompd.first;
       digiIt != rcompd.second; ++digiIt) {
    if (me1a && digiIt->getStrip() <= 16) {
      // Move ME1/A comparators from CFEB=0 to CFEB=4 if this has not
      // been done already.
      CSCComparatorDigi digi_corr(digiIt->getStrip()+64,
                                  digiIt->getComparator(),
                                  digiIt->getTimeBinWord());
      digiV[id.layer()-1].push_back(digi_corr);
    }
    else {
      digiV[id.layer()-1].push_back(*digiIt);
    }
  }
}

void CSCCathodeLCTProcessor::readComparatorDigis(
        std::vector<int> halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  // Single-argument version for TMB07 (halfstrip-only) firmware.
  // Takes the comparator & time info and stuffs it into halfstrip vector.
  // Multiple hits on the same strip are allowed.

  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    int i_digi = 0; // digi counter, for dumps.
    for (std::vector<CSCComparatorDigi>::iterator pld = digiV[i_layer].begin();
         pld != digiV[i_layer].end(); pld++, i_digi++) {
      // Dump raw digi info.
      if (infoV > 1) {
        std::ostringstream strstrm;
        strstrm << "Comparator digi: comparator = " << pld->getComparator()
                << " strip #" << pld->getStrip()
                << " time bins on:";
        std::vector<int> bx_times = pld->getTimeBinsOn();
        for (unsigned int tbin = 0; tbin < bx_times.size(); tbin++)
          strstrm << " " << bx_times[tbin];
        LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
      }

      // Get comparator: 0/1 for left/right halfstrip for each comparator
      // that fired.
      int thisComparator = pld->getComparator();
      if (thisComparator != 0 && thisComparator != 1) {
        if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
          << "+++ Found comparator digi with wrong comparator value = "
          << thisComparator << "; skipping it... +++\n";
        continue;
      }

      // Get strip number.
      int thisStrip = pld->getStrip() - 1; // count from 0
      if (thisStrip < 0 || thisStrip >= numStrips) {
        if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
          << "+++ Found comparator digi with wrong strip number = "
          << thisStrip
          << " (max strips = " << numStrips << "); skipping it... +++\n";
        continue;
      }
      // 2*strip: convert strip to 1/2 strip
      // comp   : comparator output
      // stagger: stagger for this layer
      int thisHalfstrip = 2*thisStrip + thisComparator + stagger[i_layer];
      if (thisHalfstrip >= 2*numStrips + 1) {
        if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
          << "+++ Found wrong halfstrip number = " << thisHalfstrip
          << "; skipping this digi... +++\n";
        continue;
      }

      // Get bx times on this digi and check that they are within the bounds.
      std::vector<int> bx_times = pld->getTimeBinsOn();
      for (unsigned int i = 0; i < bx_times.size(); i++) {
        // Total number of time bins in DAQ readout is given by fifo_tbins,
        // which thus determines the maximum length of time interval.
        //
        // In TMB07 version, better data-emulator agreement is
        // achieved when hits in the first 2 time bins are excluded.
        // As of May 2009, the reasons for this are not fully
        // understood yet (the work is on-going).
        if (bx_times[i] > 1 && bx_times[i] < static_cast<int>(fifo_tbins)) {

          if (i == 0 || (i > 0 && bx_times[i]-bx_times[i-1] >=
                         static_cast<int>(hit_persist))) {
            // A later hit on the same strip is ignored during the
            // number of clocks defined by the "hit_persist" parameter
            // (i.e., 6 bx's by default).
            if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
              << "Comp digi: layer " << i_layer+1
              << " digi #"           << i_digi+1
              << " strip "           << thisStrip
              << " halfstrip "       << thisHalfstrip
              << " distrip "         << thisStrip/2 + // [0-39]
                             ((thisStrip%2 == 1 && thisComparator == 1 && stagger[i_layer] == 1) ? 1 : 0)
              << " time "            << bx_times[i]
              << " comparator "      << thisComparator
              << " stagger "         << stagger[i_layer];
            halfstrip[i_layer][thisHalfstrip].push_back(bx_times[i]);
          }
          else if (i > 0) {
            if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
              << " Skipping comparator digi: strip = " << thisStrip
              << ", layer = " << i_layer+1 << ", bx = " << bx_times[i]
              << ", bx of previous hit = " << bx_times[i-1];
          }
        }
        else {
          if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
            << "+++ Skipping comparator digi: strip = " << thisStrip
            << ", layer = " << i_layer+1 << ", bx = " << bx_times[i] << " +++";
        }
      }
    }
  }
}

void CSCCathodeLCTProcessor::readComparatorDigis(
  std::vector<int> halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
  std::vector<int> distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  // Two-argument version for pre-TMB07 (halfstrip and distrips) firmware.
  // Takes the comparator & time info and stuffs it into halfstrip and (and
  // possibly distrip) vector.

  int time[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS];
  int comp[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS];
  int digiNum[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_STRIPS];
  for (int i = 0; i < CSCConstants::NUM_LAYERS; i++){
    for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS; j++) {
      time[i][j]    = -999;
      comp[i][j]    =    0;
      digiNum[i][j] = -999;
    }
  }

  for (int i = 0; i < CSCConstants::NUM_LAYERS; i++) {
    std::vector <CSCComparatorDigi> layerDigiV = digiV[i];
    for (unsigned int j = 0; j < layerDigiV.size(); j++) {
      // Get one digi at a time for the layer.  -Jm
      CSCComparatorDigi thisDigi = layerDigiV[j];

      // Dump raw digi info
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "Comparator digi: comparator = " << thisDigi.getComparator()
        << " strip #" << thisDigi.getStrip()
        << " time bin = " << thisDigi.getTimeBin();

      // Get comparator: 0/1 for left/right halfstrip for each comparator
      // that fired.
      int thisComparator = thisDigi.getComparator();
      if (thisComparator != 0 && thisComparator != 1) {
        if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
          << "+++ Comparator digi with wrong comparator value: digi #" << j
          << ", comparator = " << thisComparator << "; skipping it... +++\n";
        continue;
      }

      // Get strip number.
      int thisStrip = thisDigi.getStrip() - 1; // count from 0
      if (thisStrip < 0 || thisStrip >= numStrips) {
        if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
          << "+++ Comparator digi with wrong strip number: digi #" << j
          << ", strip = " << thisStrip
          << ", max strips = " << numStrips << "; skipping it... +++\n";
        continue;
      }

      // Get Bx of this Digi and check that it is within the bounds
      int thisDigiBx = thisDigi.getTimeBin();

      // Total number of time bins in DAQ readout is given by fifo_tbins,
      // which thus determines the maximum length of time interval.
      if (thisDigiBx >= 0 && thisDigiBx < static_cast<int>(fifo_tbins)) {

        // If there is more than one hit in the same strip, pick one
        // which occurred earlier.
        // In reality, the second hit on the same distrip is ignored only
        // during the number of clocks defined by the "hit_persist" 
        // parameter (i.e., 6 bx's by default).  So if one simulates
        // a large number of bx's in a crowded environment, this
        // approximation here may not be sufficiently good.
        if (time[i][thisStrip] == -999 || time[i][thisStrip] > thisDigiBx) {
          digiNum[i][thisStrip] = j;
          time[i][thisStrip]    = thisDigiBx;
          comp[i][thisStrip]    = thisComparator;
          if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
            << "Comp digi: layer " << i+1
            << " digi #"           << j+1
            << " strip "           << thisStrip
            << " halfstrip "       << 2*thisStrip + comp[i][thisStrip] + stagger[i]
            << " distrip "         << thisStrip/2 + // [0-39]
              ((thisStrip%2 == 1 && comp[i][thisStrip] == 1 && stagger[i] == 1) ? 1 : 0)
            << " time "            <<    time[i][thisStrip]
            << " comparator "      <<    comp[i][thisStrip]
            << " stagger "         << stagger[i];
        }
      }
      else {
        if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
          << "+++ Skipping comparator digi: strip = " << thisStrip
          << ", layer = " << i+1 << ", bx = " << thisDigiBx << " +++";
      }
    }
  }

  // Take the comparator & time info and stuff it into half- and di-strip
  // arrays.
  for (int i = 0; i < CSCConstants::NUM_LAYERS; i++) {
    // Use the comparator info to setup the halfstrips and distrips.  -BT
    // This loop is only for halfstrips.
    for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS; j++) {
      if (time[i][j] >= 0) {
        int i_halfstrip = 2*j + comp[i][j] + stagger[i];
        // 2*j    : convert strip to 1/2 strip
        // comp   : comparator output
        // stagger: stagger for this layer
        if (i_halfstrip >= 2*numStrips + 1) {
          if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
            << "+++ Found wrong halfstrip number = " << i_halfstrip
            << "; skipping this digi... +++\n";
          continue;
        }
        halfstrip[i][i_halfstrip].push_back(time[i][j]);
      }
    }

    // There are no di-strips in the 2007 version of the TMB firmware.
    if (!isTMB07) {
      // This loop is only for distrips.  We have to separate the routines
      // because triad and time arrays can be changed by the distripStagger
      // routine which could mess up the halfstrips.
      static int test_iteration = 0;
      for (int j = 0; j < CSCConstants::MAX_NUM_STRIPS; j++){
        if (time[i][j] >= 0) {
          int i_distrip = j/2;
          if (j%2 == 1 && comp[i][j] == 1 && stagger[i] == 1) {
            // @@ Needs to be checked.
            bool stagger_debug = (infoV > 2);
            distripStagger(comp[i], time[i], digiNum[i], j, stagger_debug);
          }
          // comp[i][j] == 1    : hit on right half-strip.
          // stagger[i] == 1    : half-strips are shifted by 1.
          // if these conditions are met add 1; otherwise add 0.
          // So if there is a hit on the far right half-strip, and the
          // half-strips have been staggered to the right, then the di-strip
          // would actually correspond to the next highest di-strip.  -JM
          if (infoV > 2 && test_iteration == 1) {
            testDistripStagger();
            test_iteration++;
          }
          if (i_distrip >= numStrips/2 + 1) {
            if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
              << "+++ Found wrong distrip number = " << i_distrip
              << "; skipping this digi... +++\n";
            continue;
          }
          distrip[i][i_distrip].push_back(time[i][j]);
        }
      }
    }
  }
}

void CSCCathodeLCTProcessor::distripStagger(int stag_triad[CSCConstants::MAX_NUM_STRIPS],
                                   int stag_time[CSCConstants::MAX_NUM_STRIPS],
                                   int stag_digi[CSCConstants::MAX_NUM_STRIPS],
                                   int i_strip, bool debug) {
  // Author: Jason Mumford (mumford@physics.ucla.edu)
  // This routine takes care of the stagger situation where there is a hit
  // on the right half-strip of a di-strip.  If there is a stagger, then
  // we must associate that distrip with the next distrip. The situation
  // gets more complicated if the next distrip also has a hit on its right
  // half-strip.  One could imagine a whole chain of these in which case
  // we need to go into this routine recursively.  The formula is that
  // while this condition is satisfied, we enquire the next distrip,
  // until we have a hit on any other halfstrip (or triad!=3).  Then we
  // must compare the 2 different bx times and take the smallest one.
  // Afterwards, we must cycle out of the routine assigning the bx times
  // to the one strip over.

  // Used only for pre-TMB07 firmware.

  if (i_strip >= CSCConstants::MAX_NUM_STRIPS) {
    if (debug) edm::LogWarning("L1CSCTPEmulatorWrongInput")
      << "+++ Found wrong strip number = " << i_strip
      << "; cannot apply distrip staggering... +++\n";
    return;
  }

  if (debug)
    LogDebug("CSCCathodeLCTProcessor")
      << " Enter distripStagger: i_strip = " << i_strip
      << " stag_triad[i_strip] = "   << stag_triad[i_strip]
      << " stag_time[i_strip] =  "   << stag_time[i_strip]
      << " stag_triad[i_strip+2] = " << stag_triad[i_strip+2]
      << " stag_time[i_strip+2] = "  << stag_time[i_strip+2];

  // So if the next distrip has a stagger hit, go into the routine again
  // for the next distrip.
  if (i_strip+2 < CSCConstants::MAX_NUM_STRIPS && stag_triad[i_strip+2] == 1)
    distripStagger(stag_triad, stag_time, stag_digi, i_strip+2);

  // When we have reached a distrip that does not have a staggered hit,
  // if it has a hit, we compare the bx times of the
  // staggered distrip with the non-staggered distrip and we take the
  // smallest of the two and assign it to the shifted distrip time.
  if (stag_time[i_strip+2] >= 0) {
    if (stag_time[i_strip] < stag_time[i_strip+2]) {
      stag_time[i_strip+2] = stag_time[i_strip];
      stag_digi[i_strip+2] = stag_digi[i_strip];
    }
  }
  // If the next distrip did not have a hit, then we merely assign the
  // shifted time to the time associated with the staggered distrip.
  else {
    stag_time[i_strip+2] = stag_time[i_strip];
    stag_digi[i_strip+2] = stag_digi[i_strip];
  }

  // Then to prevent previous staggers from being overwritten, we assign
  // the unshifted time to -999, and then mark the triads that were shifted
  // so that we don't go into the routine ever again (such as when making
  // the next loop over strips).
  stag_time[i_strip]  = -999;
  stag_triad[i_strip] =    4;
  stag_digi[i_strip]  = -999;

  if (debug)
    LogDebug("CSCCathodeLCTProcessor")
      << " Exit  distripStagger: i_strip = " << i_strip
      << " stag_triad[i_strip] = "   << stag_triad[i_strip]
      << " stag_time[i_strip] = "    << stag_time[i_strip]
      << " stag_triad[i_strip+2] = " << stag_triad[i_strip+2]
      << " stag_time[i_strip+2] = "  << stag_time[i_strip+2];
}

// --------------------------------------------------------------------------
// The code below is a description of the idealized CLCT algorithm which
// was used in Monte Carlo studies since early ORCA days and until
// CMSSW_2_0_0 (March 2008) but was never realized in the firmware.
//
// Starting with CMSSW_3_1_0, it may no longer give the same results as
// before since old versions of overloaded < > == operators in CLCTDigi
// class were discarded.
// --------------------------------------------------------------------------
// Idealized version for MC studies.
std::vector<CSCCLCTDigi> CSCCathodeLCTProcessor::findLCTs(const std::vector<int> strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS], int stripType)
{
  int j;
  int best_strip = 0;
  int first_bx = 999;
  const int max_lct_num = 2;
  const int adjacent_strips = 2;
  // Distrip, halfstrip pattern threshold.
  const int ptrn_thrsh[2] = {nplanes_hit_pattern, nplanes_hit_pattern};
  int highest_quality = 0;

  int keystrip_data[CSCConstants::NUM_HALF_STRIPS][7];
  int final_lcts[max_lct_num];

  std::vector <CSCCLCTDigi> lctList;

  int nStrips = 0;
  if (stripType == 1)      nStrips = 2*numStrips + 1;
  else if (stripType == 0) nStrips = numStrips/2 + 1;

  if (infoV > 1) dumpDigis(strip, stripType, nStrips);

  // Send data to a pretrigger so that we don't excessively look at data
  // that won't give an LCT. If there is a pretrigger, then get all quality
  // and bend for all keystrips.
  if (preTrigger(strip, stripType, nStrips, first_bx)){
    getKeyStripData(strip, keystrip_data, nStrips, first_bx, best_strip, stripType);

    /* Set all final_lcts to impossible key_strip numbers */
    for (j = 0; j < max_lct_num; j++)
      final_lcts[j] = -999;

    // Now take the keystrip with the best quality, and do a search over the
    // rest of the strips for the next highest quality.  Do the search over a 
    // range excluding a certain number of keystrips adjacent to the original
    // best key_strip.
    final_lcts[0] = best_strip;

    for (int key_strip = 0; key_strip < (nStrips-stripType); key_strip++){
      // If indexed strip does not fall within excluded range, then continue
      if (abs(best_strip - key_strip) > adjacent_strips){
        // Match with highest quality
        if (keystrip_data[key_strip][CLCT_QUALITY] > highest_quality){
          highest_quality = keystrip_data[key_strip][CLCT_QUALITY];
          final_lcts[1] = key_strip;
        }
      }
    }

    for (j = 0; j < max_lct_num; j++){
      // Only report LCTs if the number of layers hit is greater than or
      // equal to the (variable) valid pattern threshold ptrn_thrsh.
      int keystrip = final_lcts[j];
      if (keystrip >= 0 &&
          keystrip_data[keystrip][CLCT_QUALITY] >= ptrn_thrsh[stripType]) {
        // assign the stripType here. 1 = halfstrip, 0 = distrip.
        keystrip_data[keystrip][CLCT_STRIP_TYPE] = stripType;
        // Now make the LCT words for the 2 highest, and store them in a list
        int theHalfStrip = (keystrip_data[keystrip][CLCT_STRIP_TYPE] ?
                            keystrip_data[keystrip][CLCT_STRIP] :
                            4*keystrip_data[keystrip][CLCT_STRIP]);
        keystrip_data[keystrip][CLCT_CFEB] = theHalfStrip/32;
        int halfstrip_in_cfeb =
          theHalfStrip - 32*keystrip_data[keystrip][CLCT_CFEB];

        CSCCLCTDigi thisLCT(1, keystrip_data[keystrip][CLCT_QUALITY],
                            keystrip_data[keystrip][CLCT_PATTERN],
                            keystrip_data[keystrip][CLCT_STRIP_TYPE],
                            keystrip_data[keystrip][CLCT_BEND],
                            halfstrip_in_cfeb,
                            keystrip_data[keystrip][CLCT_CFEB],
                            keystrip_data[keystrip][CLCT_BX]);
        if (infoV > 2) {
          char stripType =
            (keystrip_data[keystrip][CLCT_STRIP_TYPE] == 0) ? 'D' : 'H';
          char bend =
            (keystrip_data[keystrip][CLCT_BEND] == 0) ? 'L' : 'R';
          LogTrace("CSCCathodeLCTProcessor")
            << " Raw Find: "
            << "Key Strip: "  << std::setw(3)
            << keystrip_data[keystrip][CLCT_STRIP]
            << " Pattern: "   << std::setw(2)
            << keystrip_data[keystrip][CLCT_PATTERN]
            << " Bend: "      << std::setw(1) << bend
            << " Quality: "   << std::setw(1)
            << keystrip_data[keystrip][CLCT_QUALITY]
            << " stripType: " << std::setw(1) << stripType
            << " BX: "        << std::setw(1)
            << keystrip_data[keystrip][CLCT_BX];
        }
        lctList.push_back(thisLCT);
      }
    }
  }

  return lctList;
} // findLCTs -- idealized version for MC studies.


// Idealized version for MC studies.
bool CSCCathodeLCTProcessor::preTrigger(const std::vector<int> strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
                                        const int stripType, const int nStrips,
                                        int& first_bx)
{
  static const int hs_thresh = nplanes_hit_pretrig;
  static const int ds_thresh = nplanes_hit_pretrig;

  unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS];
  int i_layer, i_strip, this_layer, this_strip;
  int hits, layers_hit;
  bool hit_layer[CSCConstants::NUM_LAYERS];

  const int pre_trigger_layer_min = (stripType == 1) ? hs_thresh : ds_thresh;

  // Fire half-strip/di-strip one-shots for hit_persist bx's (6 bx's by
  // default).
  pulseExtension(strip, nStrips, pulse);

  // Now do a loop over different bunch-crossing times.
  for (unsigned int bx_time = 0; bx_time < fifo_tbins; bx_time++) {
    // For any given bunch-crossing, start at the lowest keystrip and look for
    // the number of separate layers in the pattern for that keystrip that have
    // pulses at that bunch-crossing time.  Do the same for the next keystrip, 
    // etc.  Then do the entire process again for the next bunch-crossing, etc
    // until you find a pre-trigger.
    for (int key_strip = 0; key_strip < nStrips; key_strip++){
      // Clear variables
      hits = 0;
      layers_hit = 0;
      for (i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
        hit_layer[i_layer] = false;
      // Loop over pattern strips and look for hits.
      for (i_strip = 0; i_strip < NUM_PATTERN_STRIPS; i_strip++){
        this_layer = pre_hit_pattern[0][i_strip];
        this_strip = pre_hit_pattern[1][i_strip]+key_strip;
        if (this_strip >= 0 && this_strip < nStrips) {
          // Perform bit operation to see if pulse is 1 at a certain bx_time.
          if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
            hits++;
            // Store number of layers hit.
            if (hit_layer[this_layer] == false) {
              hit_layer[this_layer] = true;
              layers_hit++;

              // Look if number of layers hit is greater or equal than some
              // pre-defined threshold.
              if (layers_hit >= pre_trigger_layer_min) {
                first_bx = bx_time;
                return true;
              }
            }
          }
        }
      }
    }
  }
  // If the pretrigger was never satisfied, then return false.
  return false;
} // preTrigger -- idealized version for MC studies.


// Idealized version for MC studies.
void CSCCathodeLCTProcessor::getKeyStripData(const std::vector<int> strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
        int keystrip_data[CSCConstants::NUM_HALF_STRIPS][7],
        int nStrips, int first_bx, int& best_strip, int stripType) {
  int lct_pattern[NUM_PATTERN_STRIPS];
  int key_strip, this_layer, this_strip;
  int quality, best_quality;
  int bend = 0;
  int highest_quality = 0;
  bool nullPattern;

  for (key_strip = 0; key_strip < nStrips; key_strip++)
    for (int i = 0; i < 7; i++)
      keystrip_data[key_strip][i] = 0;

  // Now we need to look at all the keystrips and take the best pattern
  // for each.  There are multiple patterns available for each keystrip.

  for (key_strip = 0; key_strip < (nStrips-stripType); key_strip++){
    nullPattern = true;
    for (int pattern_strip = 0; pattern_strip < NUM_PATTERN_STRIPS; pattern_strip++){
      this_layer = pre_hit_pattern[0][pattern_strip];
      this_strip = pre_hit_pattern[1][pattern_strip] + key_strip;
      // This conditional statement prevents us from looking at strips
      // that don't exist along the chamber boundaries.
      if ((this_strip >= 0 && this_strip < nStrips) &&
          !strip[this_layer][this_strip].empty()) {
        if (nullPattern) nullPattern = false;
        std::vector<int> bx_times = strip[this_layer][this_strip];
        lct_pattern[pattern_strip] = bx_times[0];
      }
      else
        lct_pattern[pattern_strip] = -999;
      }
    // do the rest only if there is at least one DIGI in the pattern for
    // this keystrip
    if (nullPattern) continue;

    // Initialize best_quality to zero so that we can look for best pattern
    // within a keystrip.
    best_quality = 0;

    // Loop over all possible patterns.
    // Loop in reverse order, in order to give priority to a straighter
    // pattern (larger pattern_num) in case of equal qualities.
    // Exclude pattern 0 since it is not defined.
    for (int pattern_num = CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07-1; pattern_num > 0; pattern_num--) {
      // Get the pattern quality from lct_pattern.
      // TMB latches LCTs drift_delay clocks after pretrigger.
      int latch_bx = first_bx + drift_delay;
      getPattern(pattern_num, lct_pattern, latch_bx, quality, bend);
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "Key_strip " << key_strip << " quality of pattern_num "
        << pattern_num << ": " << quality;
      if (quality > best_quality){
        // Store the best pattern, quality, etc., for each key_strip.
        keystrip_data[key_strip][CLCT_PATTERN] = pattern_num;
        keystrip_data[key_strip][CLCT_BEND]    = bend;
        keystrip_data[key_strip][CLCT_STRIP]   = key_strip;
        keystrip_data[key_strip][CLCT_BX]      = first_bx;
        // keystrip_data[key_strip][CLCT_STRIP_TYPE] = stripType; //assign the stripType elsewhere
        keystrip_data[key_strip][CLCT_QUALITY] = quality;
        if (quality > highest_quality){
          // Keep track of which strip had the highest quality.
          // highest_quality refers to the overall highest quality for all
          // key strips. This is different than best_quality which refers
          // to the best quality in a keystrip from different patterns.
          best_strip = key_strip;
          highest_quality = quality;
        }
        best_quality = quality;
      }
    }
  }
} // getKeyStripData -- idealized version for MC studies.


// Idealized version for MC studies.
void CSCCathodeLCTProcessor::getPattern(int pattern_num,
       int strip_value[NUM_PATTERN_STRIPS], int bx_time,
       int& quality, int& bend){
  // This function takes strip values and bx_time to find out which hits fall
  // within a certain pattern.  Quality, and bend are then calculated based on
  // which strip pattern and how many layers were hit within the pattern.
  int layers_hit = 0;
  bool hit_layer[CSCConstants::NUM_LAYERS];

  // Clear hit_layer array to keep track of number of layers hit.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
    hit_layer[i_layer] = false;

  // Loop over all designated patterns.
  for (int strip_num = 0; strip_num < NUM_PATTERN_STRIPS; strip_num++){
    if (hitIsGood(strip_value[strip_num], bx_time)){
      for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++){
        // Loop over layer and see if corresponding strip is on same layer
        // If so then increment number of hits.
        if (i_layer == pattern[pattern_num][strip_num]){
          // If layer has no hits, then increment number of layers hit.
          if (hit_layer[i_layer] == false){
            layers_hit++;
            hit_layer[i_layer] = true;
          }
        }
      }
    }
  }
  // Get bend value from pattern.
  bend = pattern[pattern_num][NUM_PATTERN_STRIPS];
  quality = layers_hit;
} // getPattern -- idealized version for MC studies.


// Idealized version for MC studies.
bool CSCCathodeLCTProcessor::hitIsGood(int hitTime, int BX) {
  // Find out if hit time is good.  Hit should have occurred no more than
  // hit_persist clocks before the latching time.
  int dt = BX - hitTime;
  if (dt >= 0 && dt <= static_cast<int>(hit_persist)) {return true;}
  else {return false;}
} // hitIsGood -- idealized version for MC studies.


// --------------------------------------------------------------------------
// The code below is a description of the pre-2007 version of the CLCT
// algorithm.  It was used in numerous CSC test beams and MTCC for
// firmware-emulator comparisons, but due to a number of known limitations
// it was never used in Monte Carlo studies.
//
// Starting with CMSSW_3_1_0, it may no longer give the same results as
// before since old versions of overloaded < > == operators in CLCTDigi
// class were discarded.
// --------------------------------------------------------------------------
// Pre-2007 version.
std::vector <CSCCLCTDigi> CSCCathodeLCTProcessor::findLCTs(
 const std::vector<int> halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
 const std::vector<int> distrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  std::vector <CSCCLCTDigi> lctList;
  int _bx[2] = {999, 999};
  int first_bx = 999;

  const int nhStrips = 2*numStrips + 1;
  const int ndStrips = numStrips/2 + 1;

  if (infoV > 1) {
    dumpDigis(halfstrip, 1, nhStrips);
    dumpDigis(distrip,   0, ndStrips);
  }

  // Test beam version of TMB pretrigger and LCT sorting
  int h_keyStrip[MAX_CFEBS];       // one key per CFEB
  unsigned int h_nhits[MAX_CFEBS]; // number of hits in envelope for each key
  int d_keyStrip[MAX_CFEBS];       // one key per CFEB
  unsigned int d_nhits[MAX_CFEBS]; // number of hits in envelope for each key
  int keystrip_data[2][7];    // 2 possible LCTs per CSC x 7 LCT quantities
  unsigned int h_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]; // simulate digital one-shot
  unsigned int d_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]; // simulate digital one-shot
  bool pre_trig[2] = {false, false};

  // All half-strip and di-strip pattern envelopes are evaluated
  // simultaneously, on every clock cycle.
  pre_trig[0] = preTrigger(halfstrip, h_pulse, 1, nhStrips, 0, _bx[0]);
  pre_trig[1] = preTrigger(  distrip, d_pulse, 0, ndStrips, 0, _bx[1]);

  // If any of 200 half-strip and di-strip envelopes has enough layers hit in
  // it, TMB will pre-trigger.
  if (pre_trig[0] || pre_trig[1]) {
    first_bx = (_bx[0] < _bx[1]) ? _bx[0] : _bx[1];
    if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
      << "half bx " << _bx[0] << " di bx " << _bx[1] << " first " << first_bx
      << "\n ..... waiting drift delay ..... ";

    // Empirically-found trick allowing to dramatically improve agreement
    // with MTCC-II data.
    // The trick is to ignore hits in a few first time bins when latching
    // hits for priority encode envelopes.  For MTCC-II, we need to ignore
    // hits in time bins 0-3 inclusively.
    //
    // Firmware configuration has been fixed for most of 2007 runs, so
    // this trick should NOT be used when emulating 2007 trigger.
    /*
    int max_bx = 4;
    for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++) {
      for (int istrip = 0; istrip < CSCConstants::NUM_HALF_STRIPS; istrip++) {
        for (int bx = 0; bx < max_bx; bx++) {
          if (((h_pulse[ilayer][istrip] >> bx) & 1) == 1) {
            h_pulse[ilayer][istrip] = 0;
          }
        }
      }
      for (int istrip = 0; istrip < CSCConstants::NUM_DI_STRIPS; istrip++) {
        for (int bx = 0; bx < max_bx; bx++) {
          if (((d_pulse[ilayer][istrip] >> bx) & 1) == 1) {
            d_pulse[ilayer][istrip] = 0;
          }
        }
      }
    }
    */

    // TMB latches LCTs drift_delay clocks after pretrigger.
    int latch_bx = first_bx + drift_delay;
    latchLCTs(h_pulse, h_keyStrip, h_nhits, 1, CSCConstants::NUM_HALF_STRIPS,
              latch_bx);
    latchLCTs(d_pulse, d_keyStrip, d_nhits, 0,   CSCConstants::NUM_DI_STRIPS,
              latch_bx);

    if (infoV > 1) {
      LogTrace("CSCCathodeLCTProcessor")
        << "...............................\n"
        << "Final halfstrip hits and keys (after drift delay) ...";
      for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
        LogTrace("CSCCathodeLCTProcessor")
          << "cfeb " << icfeb << " key: " << h_keyStrip[icfeb]
          << " hits " << h_nhits[icfeb];
      }
      LogTrace("CSCCathodeLCTProcessor")
        << "Final distrip hits and keys (after drift delay) ...";
      for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
        LogTrace("CSCCathodeLCTProcessor")
          << "cfeb " << icfeb << " key: " << d_keyStrip[icfeb]
          << " hits " << d_nhits[icfeb];
      }
    }
    priorityEncode(h_keyStrip, h_nhits, d_keyStrip, d_nhits, keystrip_data);
    getKeyStripData(h_pulse, d_pulse, keystrip_data, first_bx);

    for (int ilct = 0; ilct < 2; ilct++) {
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "found lcts: ilct " << ilct
        << "  key strip " << keystrip_data[ilct][CLCT_STRIP];
      if (keystrip_data[ilct][CLCT_STRIP] != -1) {
        int halfstrip_in_cfeb = 0;
        if (keystrip_data[ilct][CLCT_STRIP_TYPE] == 0)
          halfstrip_in_cfeb = 4*keystrip_data[ilct][CLCT_STRIP] -
                             32*keystrip_data[ilct][CLCT_CFEB];
        else
          halfstrip_in_cfeb = keystrip_data[ilct][CLCT_STRIP] -
                             32*keystrip_data[ilct][CLCT_CFEB];

        CSCCLCTDigi thisLCT(1, keystrip_data[ilct][CLCT_QUALITY],
                            keystrip_data[ilct][CLCT_PATTERN],
                            keystrip_data[ilct][CLCT_STRIP_TYPE],
                            keystrip_data[ilct][CLCT_BEND],
                            halfstrip_in_cfeb,
                            keystrip_data[ilct][CLCT_CFEB],
                            keystrip_data[ilct][CLCT_BX]);
        lctList.push_back(thisLCT);
      }
    }
  }

  return lctList;

} // findLCTs -- pre-2007 version.


// Pre-2007 version.
bool CSCCathodeLCTProcessor::preTrigger(
   const std::vector<int> strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
   unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
                                        const int stripType, const int nStrips,
                                        const int start_bx, int& first_bx) {
  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "....................PreTrigger...........................";

  if (start_bx == 0) {
    // Fire one-shots for hit_persist bx's (6 bx's by default).
    pulseExtension(strip, nStrips, pulse);
  }

  bool pre_trig = false;
  // Now do a loop over bx times to see (if/when) track goes over threshold
  for (unsigned int bx_time = start_bx; bx_time < fifo_tbins; bx_time++) {
    // For any given bunch-crossing, start at the lowest keystrip and look for
    // the number of separate layers in the pattern for that keystrip that have
    // pulses at that bunch-crossing time.  Do the same for the next keystrip, 
    // etc.  Then do the entire process again for the next bunch-crossing, etc
    // until you find a pre-trigger.
    pre_trig = preTrigLookUp(pulse, stripType, nStrips, bx_time);
    if (pre_trig) {
      first_bx = bx_time; // bx at time of pretrigger
      return true;
    }
  } // end loop over bx times

  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "no pretrigger for strip type " << stripType << ", returning \n";
  first_bx = fifo_tbins;
  return false;
} // preTrigger -- pre-2007 version.


// Pre-2007 version.
bool CSCCathodeLCTProcessor::preTrigLookUp(
           const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
           const int stripType, const int nStrips,
           const unsigned int bx_time) {
  static const int hs_thresh = nplanes_hit_pretrig;
  static const int ds_thresh = nplanes_hit_pretrig;

  bool hit_layer[CSCConstants::NUM_LAYERS];
  int key_strip, this_layer, this_strip, layers_hit;

  // Layers hit threshold for pretrigger
  const int pre_trigger_layer_min = (stripType == 1) ? hs_thresh : ds_thresh;

  if (stripType != 0 && stripType != 1) {
    if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
      << "+++ preTrigLookUp: stripType = " << stripType
      << " does not correspond to half-strip/di-strip patterns! +++\n";
    return false;
  }

  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) { // loop over cfebs
    // Loop over (di-/half-)strips in CFEB.
    for (int istrip = 0; istrip < cfeb_strips[stripType]; istrip++) {
      // Calculate candidate key.
      key_strip = icfeb*cfeb_strips[stripType] + istrip;
      layers_hit = 0;
      for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
        hit_layer[ilayer] = false;

      // Loop over strips in pretrigger pattern mask and look for hits.
      for (int pstrip = 0; pstrip < NUM_PATTERN_STRIPS; pstrip++) {
        this_layer = pre_hit_pattern[0][pstrip];
        this_strip = pre_hit_pattern[1][pstrip]+key_strip;

        if (this_strip >= 0 && this_strip < nStrips) {
          // Determine if "one shot" is high at this bx_time
          if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
            if (hit_layer[this_layer] == false) {
              hit_layer[this_layer] = true;
              layers_hit++;                  // determines number of layers hit
              if (layers_hit >= pre_trigger_layer_min) {
                if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
                  << "pretrigger at bx: " << bx_time
                  << ", cfeb " << icfeb << ", returning";
                return true;
              }
            }
          }
        }
      } // end loop over strips in pretrigger pattern
    } // end loop over candidate key strips in cfeb
  } // end loop over cfebs, if pretrigger is found, stop looking and return

  return false;

} // preTrigLookUp -- pre-2007 version.


// Pre-2007 version.
void CSCCathodeLCTProcessor::latchLCTs(
           const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
           int keyStrip[MAX_CFEBS], unsigned int n_hits[MAX_CFEBS],
           const int stripType, const int nStrips, const int bx_time) {

  bool hit_layer[CSCConstants::NUM_LAYERS];
  int key_strip, this_layer, this_strip;
  int layers_hit, prev_hits;

  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
    keyStrip[icfeb] = -1;
    n_hits[icfeb]   =  0;
  }

  if (stripType != 0 && stripType != 1) {
    if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
      << "+++ latchLCTs: stripType = " << stripType
      << " does not correspond to half-strip/di-strip patterns! +++\n";
    return;
  }

  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) { // loop over CFEBs
    prev_hits = 0;
    // Loop over (di-/half-)strips in CFEB.
    for (int istrip = 0; istrip < cfeb_strips[stripType]; istrip++) {
      // Calculate candidate key.
      key_strip = icfeb*cfeb_strips[stripType] + istrip;
      layers_hit = 0;
      for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
        hit_layer[ilayer] = false;

      // Loop over strips in pretrigger pattern mask and look for hits.
      for (int pstrip = 0; pstrip < NUM_PATTERN_STRIPS; pstrip++) {
        this_layer = pre_hit_pattern[0][pstrip];
        this_strip = pre_hit_pattern[1][pstrip]+key_strip;

        if (this_strip >= 0 && this_strip < nStrips) {
          // Determine if "one shot" is high at this bx_time
          if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
            if (hit_layer[this_layer] == false) {
              hit_layer[this_layer] = true;
              layers_hit++;                  // number of layers hit
            }
          }
        }
      } // end loop over strips in pretrigger pattern
      if (infoV > 1) {
        if (layers_hit > 0) LogTrace("CSCCathodeLCTProcessor")
          << "cfeb: " << icfeb << "  key_strip: " << key_strip
          << "  n_hits: " << layers_hit;
      }
      // If two or more keys have an equal number of hits, the lower number
      // key is taken.  Hence, replace the previous key only if this key has
      // more hits.
      if (layers_hit > prev_hits) {
        prev_hits = layers_hit;
        keyStrip[icfeb] = key_strip;  // key with highest hits is LCT key strip
        n_hits[icfeb] = layers_hit;   // corresponding hits in envelope
      }
    }  // end loop over candidate key strips in cfeb
  }  // end loop over cfebs
} // latchLCTs -- pre-2007 version.


// Pre-2007 version.
void CSCCathodeLCTProcessor::priorityEncode(
        const int h_keyStrip[MAX_CFEBS], const unsigned int h_nhits[MAX_CFEBS],
        const int d_keyStrip[MAX_CFEBS], const unsigned int d_nhits[MAX_CFEBS],
        int keystrip_data[2][7]) {
  static const unsigned int hs_thresh = nplanes_hit_pretrig;
  //static const unsigned int ds_thresh = nplanes_hit_pretrig;

  int ihits[2]; // hold hits for sorting
  int cfebs[2]; // holds CFEB numbers corresponding to highest hits
  const int nlcts = 2;
  int key_strip[MAX_CFEBS], key_phits[MAX_CFEBS], strip_type[MAX_CFEBS];

  // initialize arrays
  for (int ilct = 0; ilct < nlcts; ilct++) {
    for (int j = 0; j < 7; j++) keystrip_data[ilct][j] = -1;
    ihits[ilct] = 0;
    cfebs[ilct] = -1;
  }
  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
    key_strip[icfeb]  = -1;
    key_phits[icfeb]  = -1;
    strip_type[icfeb] = -1;
  }

  if (infoV > 1) {
    LogTrace("CSCCathodeLCTProcessor")
      << ".....................PriorityEncode.......................";
    std::ostringstream strstrm;
    strstrm << "hkeys:";
    for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
      strstrm << std::setw(4) << h_keyStrip[icfeb];
    }
    strstrm << "\ndkeys:";
    for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
      strstrm << std::setw(4) << d_keyStrip[icfeb];
    }
    LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
  }

  // Loop over CFEBs and determine better of half- or di- strip pattern.
  // If select halfstrip, promote it by adding an extra bit to its hits.
  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
    if (h_keyStrip[icfeb] != -1 && d_keyStrip[icfeb] != -1) {
      if (h_nhits[icfeb] >= hs_thresh) {
        key_strip[icfeb] = h_keyStrip[icfeb];
        key_phits[icfeb] = h_nhits[icfeb] + 8; // halfstrip promotion
        strip_type[icfeb]= 1;
      }
      // For di-strip envelope there is no requirement that the number of
      // layers hit is >= ds_thresh!!!
      // else if (d_nhits[icfeb] >= ds_thresh) {
      else {
        key_strip[icfeb] = d_keyStrip[icfeb];
        key_phits[icfeb] = d_nhits[icfeb];
        strip_type[icfeb]= 0;
      }
    }
    else if (h_keyStrip[icfeb] != -1) {
      if (h_nhits[icfeb] >= hs_thresh) {
        key_strip[icfeb] = h_keyStrip[icfeb];
        key_phits[icfeb] = h_nhits[icfeb] + 8; // halfstrip promotion
        strip_type[icfeb]= 1;
      }
    }
    else if (d_keyStrip[icfeb] != -1) {
      // if (d_nhits[icfeb] >= ds_thresh) {
        key_strip[icfeb] = d_keyStrip[icfeb];
        key_phits[icfeb] = d_nhits[icfeb];
        strip_type[icfeb]= 0;
      // }
    }
    if (infoV > 1 && strip_type[icfeb] != -1) {
      if (strip_type[icfeb] == 0)
        LogTrace("CSCCathodeLCTProcessor")
          << "  taking distrip pattern on cfeb " << icfeb;
      else if (strip_type[icfeb] == 1)
        LogTrace("CSCCathodeLCTProcessor")
          << "  taking halfstrip pattern on cfeb " << icfeb;
      LogTrace("CSCCathodeLCTProcessor")
        << "     cfeb " << icfeb << " key " << key_strip[icfeb]
        << " hits " << key_phits[icfeb] << " type " << strip_type[icfeb];
    }
  }

  // Remove duplicate LCTs at boundaries -- it is possilbe to have key[0]
  // be the higher of the two key strips, take this into account, but
  // preserve rank of lcts.
  int key[MAX_CFEBS];
  int loedge, hiedge;

  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "...... Remove Duplicates ......";
  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
    if(strip_type[icfeb] == 0) key[icfeb] = key_strip[icfeb]*4;
    else                       key[icfeb] = key_strip[icfeb];
  }
  for (int icfeb = 0; icfeb < MAX_CFEBS-1; icfeb++) {
    if (key[icfeb] >= 0 && key[icfeb+1] >= 0) {
      loedge = cfeb_strips[1]*(icfeb*8+7)/8;
      hiedge = cfeb_strips[1]*(icfeb*8+9)/8 - 1;
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "  key 1: " << key[icfeb] << "  key 2: " << key[icfeb+1]
        << "  low edge:  " << loedge << "  high edge: " << hiedge;
      if (key[icfeb] >= loedge && key[icfeb+1] <= hiedge) {
        if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
          << "Duplicate LCTs found at boundary of CFEB " << icfeb << " ...";
        if (key_phits[icfeb+1] > key_phits[icfeb]) {
          if (infoV > 1) LogTrace("CSCCathodeLCTProcessor") 
            << "   deleting LCT on CFEB " << icfeb;
          key_strip[icfeb] = -1;
          key_phits[icfeb] = -1;
        }
        else {
          if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
            << "   deleting LCT on CFEB " << icfeb+1;
          key_strip[icfeb+1] = -1;
          key_phits[icfeb+1] = -1;
        }
      }
    }
  }

  // Now loop over CFEBs and pick best two lcts based on no. hits in envelope.
  // In case of equal quality, select the one on lower-numbered CFEBs.
  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "\n...... Select best LCTs  ......";
  for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
    if (key_phits[icfeb] > ihits[0]) {
      ihits[1] = ihits[0];
      cfebs[1] = cfebs[0];
      ihits[0] = key_phits[icfeb];
      cfebs[0] = icfeb;
      if (infoV > 1) {
        std::ostringstream strstrm;
        for (int icfeb = 0; icfeb < MAX_CFEBS; icfeb++) {
          strstrm << std::setw(4) << strip_type[icfeb];
        }
        LogTrace("CSCCathodeLCTProcessor")
          << "strip_type" << strstrm.str()
          << "\n best: ihits " << ihits[0] << " cfeb " << cfebs[0]
          << " strip_type " << ((cfebs[0] >= 0) ? strip_type[cfebs[0]] : -1)
          << "\n next: ihits " << ihits[1] << " cfeb " << cfebs[1]
          << " strip_type " << ((cfebs[1] >= 0) ? strip_type[cfebs[1]] : -1);
      }
    }
    else if (key_phits[icfeb] > ihits[1]) {
      ihits[1] = key_phits[icfeb];
      cfebs[1] = icfeb;
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "\n next: ihits " << ihits[1] << " cfeb " << cfebs[1]
        << " strip_type " << ((cfebs[1] >= 0) ? strip_type[cfebs[1]] : -1);
    }
  }

  // fill lct data array key strip with 2 highest hit lcts (if they exist)
  int jlct = 0;
  for (int ilct = 0; ilct < nlcts; ilct++) {
    if (cfebs[ilct] != -1) {
      keystrip_data[jlct][CLCT_CFEB]       = cfebs[ilct];
      keystrip_data[jlct][CLCT_STRIP]      = key_strip[cfebs[ilct]];
      keystrip_data[jlct][CLCT_STRIP_TYPE] = strip_type[cfebs[ilct]];
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "filling key: " << key_strip[cfebs[ilct]]
        << " type: " << strip_type[cfebs[ilct]];
      jlct++;
    }
  }
} // priorityEncode -- pre-2007 version.


// Pre-2007 version.
void CSCCathodeLCTProcessor::getKeyStripData(
                const unsigned int h_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
                const unsigned int d_pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
                int keystrip_data[2][7], const int first_bx) {

  int lct_pattern[NUM_PATTERN_STRIPS];
  int this_layer, this_strip;
  unsigned int quality = 0, bend = 0;
  unsigned int best_quality, best_pattern;
  bool valid[2] = {false,false};

  // Time at which TMB latches LCTs.
  int latch_bx = first_bx + drift_delay;

  // Look at keystrips determined from priorityEncode and find their best
  // pattern based on number of hits matching that pattern (quality).  Also
  // find bend angle.  There are multiple patterns available for each keystrip.

  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "...............getKeyStripData....................";

  for (int ilct = 0; ilct < 2; ilct++) {
    if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
      << "lct " << ilct << " keystrip " << keystrip_data[ilct][CLCT_STRIP]
      << " type " << keystrip_data[ilct][CLCT_STRIP_TYPE];
    if (keystrip_data[ilct][CLCT_STRIP] == -1) {// flag set in priorityEncode()
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "no lct at ilct " << ilct;
      continue;
    }
    for (int pattern_strip = 0; pattern_strip < NUM_PATTERN_STRIPS;
         pattern_strip++) {
      lct_pattern[pattern_strip] = -999;
      this_layer = pre_hit_pattern[0][pattern_strip];
      this_strip = pre_hit_pattern[1][pattern_strip] +
        keystrip_data[ilct][CLCT_STRIP];
      // This conditional statement prevents us from looking at strips
      // that don't exist along the chamber boundaries.
      if (keystrip_data[ilct][CLCT_STRIP_TYPE] == 1) {
        if (this_strip >= 0 && this_strip < CSCConstants::NUM_HALF_STRIPS) {
          // Now look at one-shots in bx where TMB latches the LCTs
          if (((h_pulse[this_layer][this_strip] >> latch_bx) & 1) == 1)
            lct_pattern[pattern_strip] = 1;
        }
      }
      else {
        if (this_strip >= 0 && this_strip < CSCConstants::NUM_DI_STRIPS) {
          // Now look at one-shots in bx where TMB latches the LCTs
          if (((d_pulse[this_layer][this_strip] >> latch_bx) & 1) == 1)
            lct_pattern[pattern_strip] = 1;
        }
      }
    }

    // Find best pattern and quality associated with key by looping over all 
    // possible patterns
    best_quality = 0;
    best_pattern = 0;

    for (unsigned int pattern_num = 0;
         pattern_num < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; pattern_num++) {
      getPattern(pattern_num, lct_pattern, quality, bend);
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
          << "pattern " << pattern_num << " quality " << quality
          << " bend " << bend;
      // Number of layers hit matching a pattern template is compared
      // to nplanes_hit_pattern.  The threshold is the same for both half- and
      // di-strip patterns.
      if (quality >= nplanes_hit_pattern) {
        // If the number of matches is the same for two pattern templates,
        // the higher pattern-template number is selected.
        if ((quality == best_quality && pattern_num > best_pattern) ||
            (quality >  best_quality)) {
          if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
            << "valid = true at quality " << quality
            << "  thresh " << nplanes_hit_pattern;
          valid[ilct] = true;
          keystrip_data[ilct][CLCT_PATTERN]    = pattern_num;
          keystrip_data[ilct][CLCT_BEND]       = bend;
          keystrip_data[ilct][CLCT_BX]         = first_bx;
          //keystrip_data[ilct][CLCT_STRIP_TYPE] = stripType;
          keystrip_data[ilct][CLCT_QUALITY]    = quality;
          best_quality = quality;
          best_pattern = pattern_num;
        }
      }
    }

    if (!valid[ilct]) {
      keystrip_data[ilct][CLCT_STRIP] = -1;  // delete lct
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "lct " << ilct << " not over threshold: deleting";
    }
    else {
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "\n" << "--------- final LCT: " << ilct << " -------------\n"
        << " key strip "   << keystrip_data[ilct][CLCT_STRIP]
        << " pattern_num " << keystrip_data[ilct][CLCT_PATTERN]
        << " quality "     << keystrip_data[ilct][CLCT_QUALITY]
        << " bend "        << keystrip_data[ilct][CLCT_BEND]
        << " bx "          << keystrip_data[ilct][CLCT_BX]
        << " type "        << keystrip_data[ilct][CLCT_STRIP_TYPE] << "\n";
    }
  } // end loop over lcts
} // getKeyStripData -- pre-2007 version.


// Pre-2007 version.
void CSCCathodeLCTProcessor::getPattern(unsigned int pattern_num,
                         const int strip_value[NUM_PATTERN_STRIPS],
                         unsigned int& quality, unsigned int& bend) {

  // This function takes strip "one-shots" at the correct bx to find out
  // which hits fall within a certain pattern.  Quality and bend are then
  // calculated based on which strip pattern and how many layers were hit
  // within the pattern.

  unsigned int layers_hit = 0;
  bool hit_layer[CSCConstants::NUM_LAYERS];

  // Clear hit_layer array to keep track of number of layers hit.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
    hit_layer[i_layer] = false;

  // Loop over all designated patterns.
  for (int strip_num = 0; strip_num < NUM_PATTERN_STRIPS; strip_num++){
    if (strip_value[strip_num] == 1){
      for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++){
        // Loop over layer and see if corresponding strip is on same layer
        // If so then increment number of hits.
        if (i_layer == pattern[pattern_num][strip_num]){
          // If layer has no hits, then increment number of layers hit.
          if (hit_layer[i_layer] == false){
            layers_hit++;
            hit_layer[i_layer] = true;
          }
        }
      }
    }
  }
  // Get bend value from pattern.
  bend = pattern[pattern_num][NUM_PATTERN_STRIPS];
  quality = layers_hit;

} // getPattern -- pre-2007 version.


// --------------------------------------------------------------------------
// The code below is a description of the 2007 version of the CLCT
// algorithm (half-strips only).  It was first used in 2008 CRUZET runs,
// and later in CRAFT.  The algorithm became the default version for
// Monte Carlo studies in March 2008 (CMSSW_2_0_0).
// --------------------------------------------------------------------------
// TMB-07 version.
std::vector<CSCCLCTDigi> CSCCathodeLCTProcessor::findLCTs(const std::vector<int> halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  std::vector<CSCCLCTDigi> lctList;

  // Max. number of half-strips for this chamber.
  const int maxHalfStrips = 2*numStrips + 1;

  if (infoV > 1) dumpDigis(halfstrip, 1, maxHalfStrips);

  // Test beam version of TMB pretrigger and LCT sorting
  enum {max_lcts = 2};
  // 2 possible LCTs per CSC x 7 LCT quantities
  int keystrip_data[max_lcts][7] = {{0}};
  unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS];

  // Fire half-strip one-shots for hit_persist bx's (6 bx's by default).
  pulseExtension(halfstrip, maxHalfStrips, pulse);

  unsigned int start_bx = 0;
  // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
  // not have a full set of hits to start pattern search anyway.
  unsigned int stop_bx  = fifo_tbins - drift_delay;
  // Allow for more than one pass over the hits in the time window.
  while (start_bx < stop_bx) {
    // All half-strip pattern envelopes are evaluated simultaneously, on every
    // clock cycle.
    int first_bx = 999;
    bool pre_trig = preTrigger(pulse, start_bx, first_bx);

    // If any of half-strip envelopes has enough layers hit in it, TMB
    // will pre-trigger.
    if (pre_trig) {
      thePreTriggerBXs.push_back(first_bx);
      if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
        << "..... pretrigger at bx = " << first_bx
        << "; waiting drift delay .....";

      // TMB latches LCTs drift_delay clocks after pretrigger.
      int latch_bx = first_bx + drift_delay;
      bool hits_in_time = ptnFinding(pulse, maxHalfStrips, latch_bx);
      if (infoV > 1) {
        if (hits_in_time) {
          for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
               hstrip < maxHalfStrips; hstrip++) {
            if (nhits[hstrip] > 0) {
              LogTrace("CSCCathodeLCTProcessor")
                << " bx = " << std::setw(2) << latch_bx << " --->"
                << " halfstrip = " << std::setw(3) << hstrip
                << " best pid = "  << std::setw(2) << best_pid[hstrip]
                << " nhits = "     << nhits[hstrip];
            }
          }
        }
      }
      // The pattern finder runs continuously, so another pre-trigger
      // could occur already at the next bx.
      start_bx = first_bx + 1;

      // Quality for sorting.
      int quality[CSCConstants::NUM_HALF_STRIPS];
      int best_halfstrip[max_lcts], best_quality[max_lcts];
      for (int ilct = 0; ilct < max_lcts; ilct++) {
        best_halfstrip[ilct] = -1;
        best_quality[ilct]   =  0;
      }

      // Calculate quality from pattern id and number of hits, and
      // simultaneously select best-quality LCT.
      if (hits_in_time) {
        for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
             hstrip < maxHalfStrips; hstrip++) {
          // The bend-direction bit pid[0] is ignored (left and right
          // bends have equal quality).
          quality[hstrip] = (best_pid[hstrip] & 14) | (nhits[hstrip] << 5);
          if (quality[hstrip] > best_quality[0]) {
            best_halfstrip[0] = hstrip;
            best_quality[0]   = quality[hstrip];
          }
          if (infoV > 1 && quality[hstrip] > 0) {
            LogTrace("CSCCathodeLCTProcessor")
              << " 1st CLCT: halfstrip = " << std::setw(3) << hstrip
              << " quality = "             << std::setw(3) << quality[hstrip]
              << " best halfstrip = " << std::setw(3) << best_halfstrip[0]
              << " best quality = "   << std::setw(3) << best_quality[0];
          }
        }
      }

      // If 1st best CLCT is found, look for the 2nd best.
      if (best_halfstrip[0] >= 0) {
        // Mark keys near best CLCT as busy by setting their quality to
        // zero, and repeat the search.
        markBusyKeys(best_halfstrip[0], best_pid[best_halfstrip[0]], quality);

        for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
           hstrip < maxHalfStrips; hstrip++) {
          if (quality[hstrip] > best_quality[1]) {
            best_halfstrip[1] = hstrip;
            best_quality[1]   = quality[hstrip];
          }
          if (infoV > 1 && quality[hstrip] > 0) {
            LogTrace("CSCCathodeLCTProcessor")
              << " 2nd CLCT: halfstrip = " << std::setw(3) << hstrip
              << " quality = "             << std::setw(3) << quality[hstrip]
              << " best halfstrip = " << std::setw(3) << best_halfstrip[1]
              << " best quality = "   << std::setw(3) << best_quality[1];
          }
        }

        // Pattern finder.
        bool ptn_trig = false;
        for (int ilct = 0; ilct < max_lcts; ilct++) {
          int best_hs = best_halfstrip[ilct];
          if (best_hs >= 0 && nhits[best_hs] >= nplanes_hit_pattern) {
            ptn_trig = true;
            keystrip_data[ilct][CLCT_PATTERN]    = best_pid[best_hs];
            keystrip_data[ilct][CLCT_BEND]       =
              pattern2007[best_pid[best_hs]][NUM_PATTERN_HALFSTRIPS];
            // Remove stagger if any.
            keystrip_data[ilct][CLCT_STRIP]      =
              best_hs - stagger[CSCConstants::KEY_CLCT_LAYER-1];
            keystrip_data[ilct][CLCT_BX]         = first_bx;
            keystrip_data[ilct][CLCT_STRIP_TYPE] = 1;           // obsolete
            keystrip_data[ilct][CLCT_QUALITY]    = nhits[best_hs];
            keystrip_data[ilct][CLCT_CFEB]       =
              keystrip_data[ilct][CLCT_STRIP]/cfeb_strips[1];
            int halfstrip_in_cfeb = keystrip_data[ilct][CLCT_STRIP] -
              cfeb_strips[1]*keystrip_data[ilct][CLCT_CFEB];

            if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
              << " Final selection: ilct " << ilct
              << " key halfstrip " << keystrip_data[ilct][CLCT_STRIP]
              << " quality "       << keystrip_data[ilct][CLCT_QUALITY]
              << " pattern "       << keystrip_data[ilct][CLCT_PATTERN]
              << " bx "            << keystrip_data[ilct][CLCT_BX];

            CSCCLCTDigi thisLCT(1, keystrip_data[ilct][CLCT_QUALITY],
                                keystrip_data[ilct][CLCT_PATTERN],
                                keystrip_data[ilct][CLCT_STRIP_TYPE],
                                keystrip_data[ilct][CLCT_BEND],
                                halfstrip_in_cfeb,
                                keystrip_data[ilct][CLCT_CFEB],
                                keystrip_data[ilct][CLCT_BX]);
            lctList.push_back(thisLCT);
          }
        }

        if (ptn_trig) {
          // Once there was a trigger, CLCT pre-trigger state machine
          // checks the number of hits that lie on a pattern template
          // at every bx, and waits for it to drop below threshold.
          // The search for CLCTs resumes only when the number of hits
          // drops below threshold.
          start_bx = fifo_tbins;
          // Stop checking drift_delay bx's short of fifo_tbins since
          // at later bx's we won't have a full set of hits for a
          // pattern search anyway.
          unsigned int stop_time = fifo_tbins - drift_delay;
          for (unsigned int bx = latch_bx + 1; bx < stop_time; bx++) {
            bool return_to_idle = true;
            bool hits_in_time = ptnFinding(pulse, maxHalfStrips, bx);
            if (hits_in_time) {
              for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
                   hstrip < maxHalfStrips; hstrip++) {
                if (nhits[hstrip] >= nplanes_hit_pattern) {
                  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
                    << " State machine busy at bx = " << bx;
                  return_to_idle = false;
                  break;
                }
              }
            }
            if (return_to_idle) {
              if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
                << " State machine returns to idle state at bx = " << bx;
              start_bx = bx;
              break;
            }
          }
        }
      }
    }
    else {
      start_bx = first_bx + 1; // no dead time
    }
  }

  return lctList;
} // findLCTs -- TMB-07 version.


// Common to all versions.
void CSCCathodeLCTProcessor::pulseExtension(
 const std::vector<int> time[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
 const int nStrips,
 unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {

  static unsigned int bits_in_pulse = 8*sizeof(pulse[0][0]);

  // Clear pulse array.  This array will be used as a bit representation of
  // hit times.  For example: if strip[1][2] has a value of 3, then 1 shifted
  // left 3 will be bit pattern of pulse[1][2].  This would make the pattern
  // look like 0000000000001000.  Then add on additional bits to signify
  // the duration of a signal (hit_persist, formerly bx_width) to simulate
  // the TMB's drift delay.  So for the same pulse[1][2] with a hit_persist
  // of 3 would look like 0000000000111000.  This is similating the digital
  // one-shot in the TMB.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
    for (int i_strip = 0; i_strip < nStrips; i_strip++)
      pulse[i_layer][i_strip] = 0;

  // Loop over all layers and halfstrips.
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    for (int i_strip = 0; i_strip < nStrips; i_strip++) {
      // If there is a hit, simulate digital one-shot persistence starting
      // in the bx of the initial hit.  Fill this into pulse[][].
      if (time[i_layer][i_strip].size() > 0) {
        std::vector<int> bx_times = time[i_layer][i_strip];
        for (unsigned int i = 0; i < bx_times.size(); i++) {
          // Check that min and max times are within the allowed range.
          if (bx_times[i] < 0 || bx_times[i] + hit_persist >= bits_in_pulse) {
            if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeDigi")
              << "+++ BX time of comparator digi (halfstrip = " << i_strip
              << " layer = " << i_layer << ") bx = " << bx_times[i]
              << " is not within the range (0-" << bits_in_pulse
              << "] allowed for pulse extension.  Skip this digi! +++\n";
            continue;
          }
          for (unsigned int bx = bx_times[i];
               bx < bx_times[i] + hit_persist; bx++)
            pulse[i_layer][i_strip] = pulse[i_layer][i_strip] | (1 << bx);
        }
      }
    }
  }
} // pulseExtension.


// TMB-07 version.
bool CSCCathodeLCTProcessor::preTrigger(
  const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
                                        const int start_bx, int& first_bx) {
  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor")
    << "....................PreTrigger...........................";

  // Max. number of half-strips for this chamber.
  const int nStrips = 2*numStrips + 1;

  bool pre_trig = false;
  // Now do a loop over bx times to see (if/when) track goes over threshold
  for (unsigned int bx_time = start_bx; bx_time < fifo_tbins; bx_time++) {
    // For any given bunch-crossing, start at the lowest keystrip and look for
    // the number of separate layers in the pattern for that keystrip that have
    // pulses at that bunch-crossing time.  Do the same for the next keystrip, 
    // etc.  Then do the entire process again for the next bunch-crossing, etc
    // until you find a pre-trigger.
    bool hits_in_time = ptnFinding(pulse, nStrips, bx_time);
    if (hits_in_time) {
      for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
           hstrip < nStrips; hstrip++) {
        if (infoV > 1) {
          if (nhits[hstrip] > 0) {
            LogTrace("CSCCathodeLCTProcessor")
              << " bx = " << std::setw(2) << bx_time << " --->"
              << " halfstrip = " << std::setw(3) << hstrip
              << " best pid = "  << std::setw(2) << best_pid[hstrip]
              << " nhits = "     << nhits[hstrip];
          }
        }
        if (nhits[hstrip]    >= nplanes_hit_pretrig &&
            best_pid[hstrip] >= pid_thresh_pretrig) {
          pre_trig = true;
        }
      }

      if (pre_trig) {
        first_bx = bx_time; // bx at time of pretrigger
        return true;
      }
    }
  } // end loop over bx times

  if (infoV > 1) LogTrace("CSCCathodeLCTProcessor") <<
                   "no pretrigger, returning \n";
  first_bx = fifo_tbins;
  return false;
} // preTrigger -- TMB-07 version.


// TMB-07 version.
bool CSCCathodeLCTProcessor::ptnFinding(
           const unsigned int pulse[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS],
           const int nStrips, const unsigned int bx_time) {
  if (bx_time >= fifo_tbins) return false;

  // This loop is a quick check of a number of layers hit at bx_time: since
  // most of the time it is 0, this check helps to speed-up the execution
  // substantially.
  unsigned int layers_hit = 0;
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    for (int i_hstrip = 0; i_hstrip < nStrips; i_hstrip++) {
      if (((pulse[i_layer][i_hstrip] >> bx_time) & 1) == 1) {
        layers_hit++;
        break;
      }
    }
  }
  if (layers_hit < nplanes_hit_pretrig) return false;

  for (int key_hstrip = 0; key_hstrip < nStrips; key_hstrip++) {
    best_pid[key_hstrip] = 0;
    nhits[key_hstrip] = 0;
  }

  // Loop over candidate key strips.
  bool hit_layer[CSCConstants::NUM_LAYERS];
  for (int key_hstrip = stagger[CSCConstants::KEY_CLCT_LAYER-1];
       key_hstrip < nStrips; key_hstrip++) {
    // Loop over patterns and look for hits matching each pattern.
    for (unsigned int pid = CSCConstants::NUM_CLCT_PATTERNS-1;
         pid >= pid_thresh_pretrig; pid--) {
      layers_hit = 0;
      for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++)
        hit_layer[ilayer] = false;

      // Loop over halfstrips in trigger pattern mask and calculate the
      // "absolute" halfstrip number for each.
      for (int strip_num = 0; strip_num < NUM_PATTERN_HALFSTRIPS;
           strip_num++) {
        int this_layer = pattern2007[pid][strip_num];
        if (this_layer >= 0 && this_layer < CSCConstants::NUM_LAYERS) {
          int this_strip = pattern2007_offset[strip_num] + key_hstrip;
          if (this_strip >= 0 && this_strip < nStrips) {
            if (infoV > 3) LogTrace("CSCCathodeLCTProcessor")
              << " In ptnFinding: key_strip = " << key_hstrip
              << " pid = " << pid << " strip_num = " << strip_num
              << " layer = " << this_layer << " strip = " << this_strip;
            // Determine if "one shot" is high at this bx_time
            if (((pulse[this_layer][this_strip] >> bx_time) & 1) == 1) {
              if (hit_layer[this_layer] == false) {
                hit_layer[this_layer] = true;
                layers_hit++;     // determines number of layers hit
              }
            }
          }
        }
      } // end loop over strips in pretrigger pattern

      if (layers_hit > nhits[key_hstrip]) {
        best_pid[key_hstrip] = pid;
        nhits[key_hstrip] = layers_hit;
        // Do not loop over the other (worse) patterns if max. numbers of
        // hits is found.
        if (nhits[key_hstrip] == CSCConstants::NUM_LAYERS) break;
      }
    } // end loop over pid
  } // end loop over candidate key strips
  return true;
} // ptnFinding -- TMB-07 version.


// TMB-07 version.
void CSCCathodeLCTProcessor::markBusyKeys(const int best_hstrip,
                                          const int best_patid,
                                int quality[CSCConstants::NUM_HALF_STRIPS]) {
  int nspan = min_separation;
  int pspan = min_separation;

  for (int hstrip = best_hstrip-nspan; hstrip <= best_hstrip+pspan; hstrip++) {
    if (hstrip >= 0 && hstrip < CSCConstants::NUM_HALF_STRIPS) {
      quality[hstrip] = 0;
    }
  }
} // markBusyKeys -- TMB-07 version.

// --------------------------------------------------------------------------
// Auxiliary code.
// --------------------------------------------------------------------------
// Dump of configuration parameters.
void CSCCathodeLCTProcessor::dumpConfigParams() const {
  std::ostringstream strm;
  strm << "\n";
  strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
  strm << "+                  CLCT configuration parameters:                  +\n";
  strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
  strm << " fifo_tbins   [total number of time bins in DAQ readout] = "
       << fifo_tbins << "\n";
  strm << " fifo_pretrig [start time of cathode raw hits in DAQ readout] = "
       << fifo_pretrig << "\n";
  strm << " hit_persist  [duration of signal pulse, in 25 ns bins] = "
       << hit_persist << "\n";
  strm << " drift_delay  [time after pre-trigger before TMB latches LCTs] = "
       << drift_delay << "\n";
  strm << " nplanes_hit_pretrig [min. number of layers hit for pre-trigger] = "
       << nplanes_hit_pretrig << "\n";
  strm << " nplanes_hit_pattern [min. number of layers hit for trigger] = "
       << nplanes_hit_pattern << "\n";
  if (isTMB07) {
    strm << " pid_thresh_pretrig [lower threshold on pattern id] = "
         << pid_thresh_pretrig << "\n";
    strm << " min_separation     [region of busy key strips] = "
         << min_separation << "\n";
  }
  strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
  LogDebug("CSCCathodeLCTProcessor") << strm.str();
}

// Reasonably nice dump of digis on half-strips and di-strips.
void CSCCathodeLCTProcessor::dumpDigis(const std::vector<int> strip[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS], const int stripType, const int nStrips) const
{
  LogDebug("CSCCathodeLCTProcessor")
    << "ME" << ((theEndcap == 1) ? "+" : "-") << theStation << "/"
    << CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber)
    << "/" << CSCTriggerNumbering::chamberFromTriggerLabels(theSector,
                                    theSubsector, theStation, theTrigChamber)
    << " strip type " << stripType << " nStrips " << nStrips;

  std::ostringstream strstrm;
  for (int i_strip = 0; i_strip < nStrips; i_strip++) {
    if (i_strip%10 == 0) {
      if (i_strip < 100) strstrm << i_strip/10;
      else               strstrm << (i_strip-100)/10;
    }
    else                 strstrm << " ";
    if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
  }
  strstrm << "\n";
  for (int i_strip = 0; i_strip < nStrips; i_strip++) {
    strstrm << i_strip%10;
    if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
  }
  for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
    strstrm << "\n";
    for (int i_strip = 0; i_strip < nStrips; i_strip++) {
      if (!strip[i_layer][i_strip].empty()) {
        std::vector<int> bx_times = strip[i_layer][i_strip];
        // Dump only the first in time.
        strstrm << std::hex << bx_times[0] << std::dec;
      }
      else {
        strstrm << "-";
      }
      if ((i_strip+1)%cfeb_strips[stripType] == 0) strstrm << " ";
    }
  }
  LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
}

// Returns vector of read-out CLCTs, if any.  Starts with the vector
// of all found CLCTs and selects the ones in the read-out time window.
std::vector<CSCCLCTDigi> CSCCathodeLCTProcessor::readoutCLCTs() {
  std::vector<CSCCLCTDigi> tmpV;

  // The start time of the L1A*CLCT coincidence window should be
  // related to the fifo_pretrig parameter, but I am not completely
  // sure how.  For now, just choose it such that the window is
  // centered at bx=7.  This may need further tweaking if the value of
  // tmb_l1a_window_size changes.
  // static int fpga_latency = 3;
  // static int early_tbins  = fifo_pretrig - fpga_latency;
  static int early_tbins = 4;
  // The number of CLCT bins in the read-out is given by the
  // tmb_l1a_window_size parameter, but made even by setting the LSB
  // of tmb_l1a_window_size to 0.
  //
  // Need to send tmb_l1a_window_size from CSCMotherboard!
  static int tmb_l1a_window_size = 7;
  static int lct_bins   = 
    (tmb_l1a_window_size%2 == 0) ? tmb_l1a_window_size : tmb_l1a_window_size-1;
  static int late_tbins = early_tbins + lct_bins;

  static int ifois = 0;
  if (ifois == 0) {
    if (infoV >= 0 && early_tbins < 0) {
      edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
        << "+++ early_tbins = " << early_tbins
        << "; in-time CLCTs are not getting read-out!!! +++" << "\n";
    }

    if (late_tbins > MAX_CLCT_BINS-1) {
      if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
        << "+++ Allowed range of time bins, [0-" << late_tbins
        << "] exceeds max allowed, " << MAX_CLCT_BINS-1 << " +++\n"
        << "+++ Set late_tbins to max allowed +++\n";
      late_tbins = MAX_CLCT_BINS-1;
    }
    ifois = 1;
  }

  // Start from the vector of all found CLCTs and select those within
  // the CLCT*L1A coincidence window.
  int bx_readout = -1;
  std::vector<CSCCLCTDigi> all_lcts = getCLCTs();
  for (std::vector <CSCCLCTDigi>::const_iterator plct = all_lcts.begin();
       plct != all_lcts.end(); plct++) {
    if (!plct->isValid()) continue;

    int bx = (*plct).getBX();
    // Skip CLCTs found too early relative to L1Accept.
    if (bx <= early_tbins) {
      if (infoV > 1) LogDebug("CSCCathodeLCTProcessor")
        << " Do not report CLCT on key halfstrip " << plct->getKeyStrip()
        << ": found at bx " << bx << ", whereas the earliest allowed bx is "
        << early_tbins+1;
      continue;
    }

    // Skip CLCTs found too late relative to L1Accept.
    if (bx > late_tbins) {
      if (infoV > 1) LogDebug("CSCCathodeLCTProcessor")
        << " Do not report CLCT on key halfstrip " << plct->getKeyStrip()
        << ": found at bx " << bx << ", whereas the latest allowed bx is "
        << late_tbins;
      continue;
    }

    // For now, take only CLCTs in the earliest bx in the read-out window:
    // in digi->raw step, CLCTs have to be packed into the TMB header, and
    // there is room just for two.
    if (bx_readout == -1 || bx == bx_readout) {
      tmpV.push_back(*plct);
      if (bx_readout == -1) bx_readout = bx;
    }
  }
  return tmpV;
}

// Returns vector of all found CLCTs, if any.  Used for ALCT-CLCT matching.
std::vector<CSCCLCTDigi> CSCCathodeLCTProcessor::getCLCTs() {
  std::vector<CSCCLCTDigi> tmpV;
  for (int bx = 0; bx < MAX_CLCT_BINS; bx++) {
    if (bestCLCT[bx].isValid())   tmpV.push_back(bestCLCT[bx]);
    if (secondCLCT[bx].isValid()) tmpV.push_back(secondCLCT[bx]);
  }
  return tmpV;
}


// --------------------------------------------------------------------------
// Test routines.  Mostly for older versions of the algorithm and outdated.
// --------------------------------------------------------------------------
void CSCCathodeLCTProcessor::testDistripStagger() {
  // Author: Jason Mumford (mumford@physics.ucla.edu)
  // This routine tests the distripStagger routine.
  // @@
  bool debug = true;
  int test_triad[CSCConstants::NUM_DI_STRIPS], test_time[CSCConstants::NUM_DI_STRIPS];
  int test_digi[CSCConstants::NUM_DI_STRIPS];
  int distrip = 0;
  test_triad[distrip] = 3;    //After routine, I expect 4
  test_triad[distrip+1] = 3;  //                        4
  test_triad[distrip+2] = 3;  //                        4 
  test_triad[distrip+3] = 3;  //                        4
  test_triad[distrip+4] = 3;  //                        4
  test_triad[distrip+5] = 3;  //                        4
  test_triad[distrip+6] = 3;  //                        4
  test_triad[distrip+7] = 3;  //                        4
  test_triad[distrip+8] = 3;  //                        4
  test_triad[distrip+9] = 3;  //                        4
  test_triad[distrip+10] = 2;  //                       2

  test_time[distrip] = 4;     //      ""      ""        0
  test_time[distrip+1] = 10;  //                        4
  test_time[distrip+2] = 2;   //                        10
  test_time[distrip+3] = 0;   //                        2
  test_time[distrip+4] = 6;   //                        2
  test_time[distrip+5] = 8;   //                        2
  test_time[distrip+6] = 10;   //                        2
  test_time[distrip+7] = 1;   //                        2
  test_time[distrip+8] = 8;   //                        2
  test_time[distrip+9] = 5;   //                        2
  test_time[distrip+10] = 6;   //                        2

  std::cout << "\n ------------------------------------------------- \n";
  std::cout << "!!!!!!Testing distripStagger routine!!!!!!" << std::endl;
  std::cout << "Values before distripStagger routine:" << std::endl;
  for (int i=distrip; i<distrip+11; i++){
    test_digi[i] = 999;
    std::cout << "test_triad[" << i << "] = " << test_triad[i];
    std::cout << "   test_time[" << i << "] = " << test_time[i] << std::endl;
  }
  distripStagger(test_triad, test_time, test_digi, distrip, debug);
  std::cout << "Values after distripStagger routine:" << std::endl;
  for (int i=distrip; i<distrip+11; i++){
    std::cout << "test_triad[" << i << "] = " << test_triad[i];
    std::cout << "   test_time[" << i << "] = " << test_time[i] << std::endl;
  }
  std::cout << "\n ------------------------------------------------- \n \n";
}

void CSCCathodeLCTProcessor::testLCTs() {
  // test to make sure what goes into an LCT is what comes out.
  for (int ptn = 0; ptn < 8; ptn++) {
    for (int bend = 0; bend < 2; bend++) {
      for (int cfeb = 0; cfeb < MAX_CFEBS; cfeb++) {
        for (int key_strip = 0; key_strip < 32; key_strip++) {
          for (int bx = 0; bx < 7; bx++) {
            for (int stripType = 0; stripType < 2; stripType++) {
              for (int quality = 3; quality < 6; quality++) {
                CSCCLCTDigi thisLCT(1, quality, ptn, stripType, bend,
                                    key_strip, cfeb, bx);
                if (ptn != thisLCT.getPattern())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "pattern mismatch: " << ptn << " "
                    << thisLCT.getPattern();
                if (bend != thisLCT.getBend())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "bend mismatch: " << bend << " " << thisLCT.getBend();
                if (cfeb != thisLCT.getCFEB()) 
                  LogTrace("CSCCathodeLCTProcessor")
                    << "cfeb mismatch: " << cfeb << " " << thisLCT.getCFEB();
                if (key_strip != thisLCT.getKeyStrip())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "strip mismatch: " << key_strip << " "
                    << thisLCT.getKeyStrip();
                if (bx != thisLCT.getBX())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "bx mismatch: " << bx << " " << thisLCT.getBX();
                if (stripType != thisLCT.getStripType())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "Strip Type mismatch: " << stripType << " "
                    << thisLCT.getStripType();
                if (quality != thisLCT.getQuality())
                  LogTrace("CSCCathodeLCTProcessor")
                    << "quality mismatch: " << quality << " "
                    << thisLCT.getQuality();
              }
            }
          }
        }
      }
    }
  }
}

void CSCCathodeLCTProcessor::printPatterns() {
  // @@
  std::cout<<" Printing patterns for Cathode LCT"<<std::endl;
  std::cout<<"       ";
  for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
    std::cout<<" Pattern "<<patternNum<<" ";
  }
  std::cout<<std::endl;
  std::cout<<" Layer ";
  for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
    std::cout<<"   Bend "<<(pattern[patternNum][NUM_PATTERN_STRIPS]==0 ? "L": "R")<<"  ";
  }
  std::cout<<std::endl;
  for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
    for (int patternNum = 0; patternNum < CSCConstants::NUM_CLCT_PATTERNS_PRE_TMB07; patternNum++) {
      if (patternNum == 0) std::cout<<"   "<<layer<<"       ";
      if ((isTMB07  && layer != CSCConstants::KEY_CLCT_LAYER-1) ||
          (!isTMB07 && layer != CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1)) {//that old counting from 1 vs 0 thing.
        int minStrip =0;
        if ((isTMB07  && layer < CSCConstants::KEY_CLCT_LAYER-1) ||
            (!isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1)) {
          minStrip = 3*layer;
        } else {
          minStrip = 3*layer - 2;// since on the key layer we only have 1 strip
        }
        for (int strip = minStrip; strip < minStrip + 3; strip++) {
          if (layer == pattern[patternNum][strip]) {
            std::cout<<"X";
          } else {
            std::cout<<"_";
          }
        }
      } else {// on the key layer we always have a hit, right?
        std::cout<<" X ";
      }
      std::cout<<"        ";
    }
    std::cout<<std::endl;
  }
}
    
void CSCCathodeLCTProcessor::testPatterns() {
//generate all possible combinations of hits in a given area and see what we find.
// Benn Tannenbaum 21 June 2001
  
  //there are 16 strips in our uber-pattern, each of which can be on or off.
  // 2^16 = 65536
  for (int possibleHits = 0; possibleHits < 65536; possibleHits++) {
    std::vector<int> stripsHit[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS];
    //assign one bit to each strip in an array. I'll start centered around strip 10.
    stripsHit[0][ 9].push_back(( possibleHits &     1 ) != 0);     // 2^0
    stripsHit[0][10].push_back(( possibleHits &     2 ) != 0);     // 2^1
    stripsHit[0][11].push_back(( possibleHits &     4 ) != 0);     // 2^2
    stripsHit[1][ 9].push_back(( possibleHits &     8 ) != 0);     // 2^3
    stripsHit[1][10].push_back(( possibleHits &    16 ) != 0);     // 2^4
    stripsHit[1][11].push_back(( possibleHits &    32 ) != 0);     // 2^5
    stripsHit[2][ 9].push_back(( possibleHits &    64 ) != 0);     // 2^6
    stripsHit[2][10].push_back(( possibleHits &   128 ) != 0);     // 2^7
    stripsHit[2][11].push_back(( possibleHits &   256 ) != 0);     // 2^8
    stripsHit[3][10].push_back(( possibleHits &   512 ) != 0);     // 2^9
    stripsHit[4][ 9].push_back(( possibleHits &  1024 ) != 0);     // 2^10
    stripsHit[4][10].push_back(( possibleHits &  2048 ) != 0);     // 2^11
    stripsHit[4][11].push_back(( possibleHits &  4096 ) != 0);     // 2^12
    stripsHit[5][ 9].push_back(( possibleHits &  8192 ) != 0);     // 2^13
    stripsHit[5][10].push_back(( possibleHits & 16384 ) != 0);     // 2^14
    stripsHit[5][11].push_back(( possibleHits & 32768 ) != 0);     // 2^15
    int numLayersHit = findNumLayersHit(stripsHit);
    std::vector <CSCCLCTDigi> results = findLCTs(stripsHit, 1);
// print out whatever we find-- but only ones where 4 or more layers are hit
// OR ones where we find something
// key: X    a hit there and was used to find pattern
//      x    a hit not involved in pattern
//      _    empty strip
//      o    a hit was there, but no pattern was found
    if (numLayersHit > 3 || results.size() > 0) {
      std::cout<<"Input "<<possibleHits<<"/"<< 65536 <<" # Found Patterns "<<results.size()<<std::endl<<" ";
      for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
        if ((isTMB07  && layer != CSCConstants::KEY_CLCT_LAYER - 1) || 
            (!isTMB07 && layer != CSCConstants::KEY_CLCT_LAYER_PRE_TMB07 - 1)) {
          for (int strip = 9; strip < 12; strip++) {
            if (!stripsHit[layer][strip].empty()) {
              if (results.size() > 0) {
                int thePatternStrip = strip - (results[0].getKeyStrip() - 2) + 3*layer;
                if ((isTMB07 && layer>=CSCConstants::KEY_CLCT_LAYER) ||
                    (!isTMB07 && layer>=CSCConstants::KEY_CLCT_LAYER_PRE_TMB07))
                  thePatternStrip -= 2;

                if (pattern[results[0].getPattern()][thePatternStrip] == layer)
                {
                  std::cout<<"X";
                } else {
                  std::cout<<"x";
                }
              } else {
                std::cout<<"o";
              }
            } else {
              std::cout<<"_";
            }
          }
          std::cout<<"   ";
          for (unsigned int output = 0; output < results.size(); output++) {
            int minStrip;
            if ((isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER-1) ||
                (!isTMB07 && layer < CSCConstants::KEY_CLCT_LAYER_PRE_TMB07-1))  {
              minStrip = 3*layer;
            } else {
              minStrip = 3*layer - 2;// since on the key layer we only have 1 strip
            }
            for (int strip = minStrip; strip < minStrip + 3; strip++) {
              if (layer == pattern[results[output].getPattern()][strip]) {
                std::cout<<"X";
              } else {
                std::cout<<"_";
              }
            }
            std::cout<<"  ";
          }
        } else {
          if (!stripsHit[layer][10].empty()) {
            std::cout<<" X ";
          } else {
            std::cout<<" _ ";
          }
          for (unsigned int output = 0; output < results.size(); output++)
            std::cout<<"    X   ";
        }
        if (layer < static_cast<int>(results.size()) ) {
          std::cout<<results[layer];
          std::cout<<" ";
        } else {
          std::cout<<" "<<std::endl<<" ";
        }
      }
    }
  }
}

int CSCCathodeLCTProcessor::findNumLayersHit(std::vector<int> 
          stripsHit[CSCConstants::NUM_LAYERS][CSCConstants::NUM_HALF_STRIPS]) {
  int number = 0;
  for (int layer = 0; layer < CSCConstants::NUM_LAYERS; layer++) {
    if ((!stripsHit[layer][ 9].empty()) || 
        (!stripsHit[layer][10].empty()) ||
        (!stripsHit[layer][11].empty()) ) number++;
  }
  return number;
}