Reference Manual

Go to the documentation of this file.
00001 import FWCore.ParameterSet.Config as cms
00002 
00003 #
00004 #    Parameters for coordinate and uncertainty calculations
00005 #    Do not change them freely...
00006 #
00007 # These are empirical values. 
00008 # To be extracted from measurements (DB)
00009 # The values bellow were tuned on MC (though there were MTCC ones too)
00010 #
00011 cscRecHitDParameters = cms.PSet(
00012     #
00013     #    a XT asymmetry model parameter
00014     XTasymmetry_ME1a = cms.double(0.023),
00015     XTasymmetry_ME1b = cms.double(0.01),
00016     XTasymmetry_ME12 = cms.double(0.015),
00017     XTasymmetry_ME13 = cms.double(0.02),
00018     XTasymmetry_ME21 = cms.double(0.023),
00019     XTasymmetry_ME22 = cms.double(0.023),
00020     XTasymmetry_ME31 = cms.double(0.023),
00021     XTasymmetry_ME32 = cms.double(0.023),
00022     XTasymmetry_ME41 = cms.double(0.023),
00023     #
00024     #    constant systematics (in cm)
00025     ConstSyst_ME1a = cms.double(0.01),
00026     ConstSyst_ME1b = cms.double(0.02),
00027     ConstSyst_ME12 = cms.double(0.02),
00028     ConstSyst_ME13 = cms.double(0.03),
00029     ConstSyst_ME21 = cms.double(0.03),
00030     ConstSyst_ME22 = cms.double(0.03),
00031     ConstSyst_ME31 = cms.double(0.03),
00032     ConstSyst_ME32 = cms.double(0.03),
00033     ConstSyst_ME41 = cms.double(0.03),
00034     #
00035     #    3 time bins noise (in ADC counts)
00036     NoiseLevel_ME1a = cms.double(9.0),
00037     NoiseLevel_ME1b = cms.double(6.0),
00038     NoiseLevel_ME12 = cms.double(7.0),
00039     NoiseLevel_ME13 = cms.double(4.0),
00040     NoiseLevel_ME21 = cms.double(5.0),
00041     NoiseLevel_ME22 = cms.double(7.0),
00042     NoiseLevel_ME31 = cms.double(5.0),
00043     NoiseLevel_ME32 = cms.double(7.0),
00044     NoiseLevel_ME41 = cms.double(5.0)
00045 )
00046
/afs/cern.ch/work/a/aaltunda/public/www/CMSSW_5_3_14/src/RecoLocalMuon/CSCRecHitD/python/cscRecHitD_cff.py
