/afs/cern.ch/work/a/aaltunda/public/www/CMSSW_5_3_13_patch3/src/RecoLocalMuon/CSCSegment/src/CSCSegAlgoTC.cc

Go to the documentation of this file.

#include "CSCSegAlgoTC.h"

#include "DataFormats/CSCRecHit/interface/CSCSegment.h"
#include "DataFormats/GeometryVector/interface/GlobalPoint.h"

// For clhep Matrix::solve
#include "DataFormats/CLHEP/interface/AlgebraicObjects.h"
#include "Geometry/CSCGeometry/interface/CSCLayer.h"

#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"

#include "CommonTools/Statistics/interface/ChiSquaredProbability.h"

#include <algorithm>
#include <cmath>
#include <iostream>
#include <string>

CSCSegAlgoTC::CSCSegAlgoTC(const edm::ParameterSet& ps) : CSCSegmentAlgorithm(ps),
                                                          myName("CSCSegAlgoTC") {
  
  debugInfo = ps.getUntrackedParameter<bool>("verboseInfo");
  
  dRPhiMax       = ps.getParameter<double>("dRPhiMax");
  dPhiMax        = ps.getParameter<double>("dPhiMax");
  dRPhiFineMax   = ps.getParameter<double>("dRPhiFineMax");
  dPhiFineMax    = ps.getParameter<double>("dPhiFineMax");
  chi2Max        = ps.getParameter<double>("chi2Max");
  chi2ndfProbMin = ps.getParameter<double>("chi2ndfProbMin");
  minLayersApart = ps.getParameter<int>("minLayersApart");
  SegmentSorting = ps.getParameter<int>("SegmentSorting");
  
  LogDebug("CSC") << myName << " has algorithm cuts set to: \n"
                  << "--------------------------------------------------------------------\n"
                  << "dRPhiMax     = " << dRPhiMax << '\n'
                  << "dPhiMax      = " << dPhiMax << '\n'
                  << "dRPhiFineMax = " << dRPhiFineMax << '\n'
                  << "dPhiFineMax  = " << dPhiFineMax << '\n'
                  << "chi2Max      = " << chi2Max << '\n'
                  << "chi2ndfProbMin = " << chi2ndfProbMin << '\n'
                  << "minLayersApart = " << minLayersApart << '\n'
                  << "SegmentSorting = " << SegmentSorting << std::endl;
}

std::vector<CSCSegment> CSCSegAlgoTC::run(const CSCChamber* aChamber, ChamberHitContainer rechits) {
  theChamber = aChamber; 
  return buildSegments(rechits); 
}

std::vector<CSCSegment> CSCSegAlgoTC::buildSegments(ChamberHitContainer rechits) {
  
  // Reimplementation of original algorithm of CSCSegmentizer, Mar-06

  LogDebug("CSC") << "*********************************************";
  LogDebug("CSC") << "Start segment building in the new chamber: " << theChamber->specs()->chamberTypeName();
  LogDebug("CSC") << "*********************************************";
  
  LayerIndex layerIndex(rechits.size());
  
  for(unsigned int i = 0; i < rechits.size(); i++) {
    
    layerIndex[i] = rechits[i]->cscDetId().layer();
  }
  
  double z1 = theChamber->layer(1)->position().z();
  double z6 = theChamber->layer(6)->position().z();
  
  if ( z1 > 0. ) {
    if ( z1 > z6 ) { 
      reverse(layerIndex.begin(), layerIndex.end());
      reverse(rechits.begin(), rechits.end());
    }    
  }
  else if ( z1 < 0. ) {
    if ( z1 < z6 ) {
      reverse(layerIndex.begin(), layerIndex.end());
      reverse(rechits.begin(), rechits.end());
    }    
  }

  if (debugInfo) {
    // dump after sorting
    dumpHits(rechits);
  }

  if (rechits.size() < 2) {
    LogDebug("CSC") << myName << ": " << rechits.size() << 
      "  hit(s) in chamber is not enough to build a segment.\n";
    return std::vector<CSCSegment>(); 
  }
  
  // We have at least 2 hits. We intend to try all possible pairs of hits to start 
  // segment building. 'All possible' means each hit lies on different layers in the chamber.
  // For now we don't care whether a hit has already been allocated to another segment;
  // we'll sort that out after building all possible segments.
  
  // Choose first hit (as close to IP as possible) h1 and 
  // second hit (as far from IP as possible) h2
  // To do this we iterate over hits in the chamber by layer - pick two layers.
  // @@ Require the two layers are at least 3 layers apart. May need tuning?
  // Then we iterate over hits within each of these layers and pick h1 and h2 from these.
  // If they are 'close enough' we build an empty segment.
  // Then try adding hits to this segment.
  
  // Define buffer for segments we build (at the end we'll sort them somehow, and remove
  // those which share hits with better-quality segments.
  
  
  std::vector<CSCSegment> segments;
  
  ChamberHitContainerCIt ib = rechits.begin();
  ChamberHitContainerCIt ie = rechits.end();
  
  for (ChamberHitContainerCIt i1 = ib; i1 != ie; ++i1) {
    
    int layer1 = layerIndex[i1-ib];
    const CSCRecHit2D* h1 = *i1;
    
    for (ChamberHitContainerCIt i2 = ie-1; i2 != i1; --i2) {
      
      int layer2 = layerIndex[i2-ib];
      
      if (abs(layer2 - layer1) < minLayersApart)
        break;
      
      const CSCRecHit2D* h2 = *i2;
      
      if (areHitsCloseInLocalX(h1, h2) && areHitsCloseInGlobalPhi(h1, h2)) {
        
        proto_segment.clear();
        
        const CSCLayer* l1 = theChamber->layer(h1->cscDetId().layer());
        GlobalPoint gp1 = l1->toGlobal(h1->localPosition());                                    
        const CSCLayer* l2 = theChamber->layer(h2->cscDetId().layer());
        GlobalPoint gp2 = l2->toGlobal(h2->localPosition());                                    
        LogDebug("CSC") << "start new segment from hits " << "h1: " << gp1 << " - h2: " << gp2 << "\n";
        
        if (!addHit(h1, layer1)) { 
          LogDebug("CSC") << "  failed to add hit h1\n";
          continue;
        }
        
        if (!addHit(h2, layer2)) { 
          LogDebug("CSC") << "  failed to add hit h2\n";
          continue;
        }
        
        tryAddingHitsToSegment(rechits, i1, i2); // changed seg 
        
        // if a segment has been found push back it into the segment collection
        if (proto_segment.empty()) {
          
          LogDebug("CSC") << "No segment has been found !!!\n";
        }       
        else {
          
          // calculate error matrix               
          AlgebraicSymMatrix error_matrix = calculateError();   

          // but reorder components to match what's required by TrackingRecHit interface
          // i.e. slopes first, then positions          
          flipErrors( error_matrix );

          candidates.push_back(proto_segment);
          origins.push_back(theOrigin);
          directions.push_back(theDirection);
          errors.push_back(error_matrix);
          chi2s.push_back(theChi2);
          LogDebug("CSC") << "Found a segment !!!\n";
        }
      }
    }
  }
  
  // We've built all possible segments. Now pick the best, non-overlapping subset.
  pruneTheSegments(rechits);
  
  // Copy the selected proto segments into the CSCSegment vector
  for(unsigned int i=0; i < candidates.size(); i++) {
    
    CSCSegment temp(candidates[i], origins[i], directions[i], errors[i], chi2s[i]); 
    segments.push_back(temp);   
  }
  
  candidates.clear();
  origins.clear();
  directions.clear();
  errors.clear();
  chi2s.clear();
  
  // Give the segments to the CSCChamber
  return segments;
}

void CSCSegAlgoTC::tryAddingHitsToSegment(const ChamberHitContainer& rechits, 
                                          const ChamberHitContainerCIt i1, const ChamberHitContainerCIt i2) {
  
  // Iterate over the layers with hits in the chamber
  // Skip the layers containing the segment endpoints
  // Test each hit on the other layers to see if it is near the segment
  // If it is, see whether there is already a hit on the segment from the same layer
  //    - if so, and there are more than 2 hits on the segment, copy the segment,
  //      replace the old hit with the new hit. If the new segment chi2 is better
  //      then replace the original segment with the new one (by swap)
  //    - if not, copy the segment, add the hit. If the new chi2/dof is still satisfactory
  //      then replace the original segment with the new one (by swap)
  
  ChamberHitContainerCIt ib = rechits.begin();
  ChamberHitContainerCIt ie = rechits.end();
  
  for (ChamberHitContainerCIt i = ib; i != ie; ++i) {
    
    if ( i == i1 || i == i2 ) 
      continue;
    
    int layer = (*i)->cscDetId().layer();
    const CSCRecHit2D* h = *i;
    
    if (isHitNearSegment(h)) {
      
      const CSCLayer* l1 = theChamber->layer(h->cscDetId().layer());
      GlobalPoint gp1 = l1->toGlobal(h->localPosition());               
      LogDebug("CSC") << "    hit at global " << gp1 << " is near segment\n.";
      
      if (hasHitOnLayer(layer)) {
        if (proto_segment.size() <= 2) {
          LogDebug("CSC") << "    " << proto_segment.size() 
                          << " hits on segment...skip hit on same layer.\n";
          continue;
        }
        
        compareProtoSegment(h, layer);
      } 
      else
        increaseProtoSegment(h, layer);
    }   // h & seg close
  }   // i
}

bool CSCSegAlgoTC::addHit(const CSCRecHit2D* aHit, int layer) {
  
  // Return true if hit was added successfully 
  // (and then parameters are updated).
  // Return false if there is already a hit on the same layer, or insert failed.
  bool ok = true;
  ChamberHitContainer::const_iterator it;
  
  for(it = proto_segment.begin(); it != proto_segment.end(); it++)
    if (((*it)->cscDetId().layer() == layer) && (aHit != *it))
      return false; 
  
  if (ok) {
    proto_segment.push_back(aHit);
    updateParameters();
  }     
  return ok;
}

bool CSCSegAlgoTC::replaceHit(const CSCRecHit2D* h, int layer) {
  
  // replace a hit from a layer 
  ChamberHitContainer::iterator it;
  for (it = proto_segment.begin(); it != proto_segment.end();) {
    if ((*it)->cscDetId().layer() == layer)
      it = proto_segment.erase(it);
    else
      ++it;   
  }
  
  return addHit(h, layer);                                  
}

void CSCSegAlgoTC::updateParameters() {
  
  // Note that we need local position of a RecHit w.r.t. the CHAMBER
  // and the RecHit itself only knows its local position w.r.t.
  // the LAYER, so need to explicitly transform to global position.
  
  //  no. of hits in the RecHitsOnSegment
  //  By construction this is the no. of layers with hitsna parte è da inserirsi tra le Contrade aperte ad accettare quello che 


  //  since we allow just one hit per layer in a segment.
  
  int nh = proto_segment.size();
  
  // First hit added to a segment must always fail here
  if (nh < 2) 
    return;
  
  if (nh == 2) {
    
    // Once we have two hits we can calculate a straight line 
    // (or rather, a straight line for each projection in xz and yz.)
    ChamberHitContainer::const_iterator ih = proto_segment.begin();
    int il1 = (*ih)->cscDetId().layer();
    const CSCRecHit2D& h1 = (**ih);
    ++ih;    
    int il2 = (*ih)->cscDetId().layer();
    const CSCRecHit2D& h2 = (**ih);
    
    //@@ Skip if on same layer, but should be impossible
    if (il1 == il2) 
      return;
    
    const CSCLayer* layer1 = theChamber->layer(il1);
    const CSCLayer* layer2 = theChamber->layer(il2);
    
    GlobalPoint h1glopos = layer1->toGlobal(h1.localPosition());
    GlobalPoint h2glopos = layer2->toGlobal(h2.localPosition());
    
    // localPosition is position of hit wrt layer (so local z = 0)
    theOrigin = h1.localPosition();
    
    // We want hit wrt chamber (and local z will be != 0)
    LocalPoint h1pos = theChamber->toLocal(h1glopos);  // FIX !!
    LocalPoint h2pos = theChamber->toLocal(h2glopos);  // FIX !!
    
    float dz = h2pos.z()-h1pos.z();
    uz = (h2pos.x()-h1pos.x())/dz ;
    vz = (h2pos.y()-h1pos.y())/dz ;
    
    theChi2 = 0.;
  }
  else if (nh > 2) {
    
    // When we have more than two hits then we can fit projections to straight lines
    fitSlopes();  
    fillChiSquared();
  } // end of 'if' testing no. of hits
  
  fillLocalDirection(); 
}

void CSCSegAlgoTC::fitSlopes() {
  
  // Update parameters of fit
  // ptc 13-Aug-02: This does a linear least-squares fit
  // to the hits associated with the segment, in the z projection.
  
  // In principle perhaps one could fit the strip and wire
  // measurements (u, v respectively), to
  // u = u0 + uz * z
  // v = v0 + vz * z
  // where u0, uz, v0, vz are the parameters resulting from the fit.
  // But what is actually done is fit to the local x, y coordinates 
  // of the RecHits. However the strip measurement controls the precision
  // of x, and the wire measurement controls that of y.
  // Precision in local coordinate:
  //       u (strip, sigma~200um), v (wire, sigma~1cm)
  
  // I have verified that this code agrees with the formulation given
  // on p246-247 of 'Data analysis techniques for high-energy physics
  // experiments' by Bock, Grote, Notz & Regler, and that on p111-113
  // of 'Statistics' by Barlow.
  
  // Formulate the matrix equation representing the least-squares fit
  // We have a vector of measurements m, which is a 2n x 1 dim matrix
  // The transpose mT is (u1, v1, u2, v2, ..., un, vn)
  // where ui is the strip-associated measurement and vi is the
  // wire-associated measurement for a given RecHit i.
  // The fit is to
  // u = u0 + uz * z
  // v = v0 + vz * z
  // where u0, uz, v0, vz are the parameters to be obtained from the fit.
  // These are contained in a vector p which is a 4x1 dim matrix, and
  // its transpose pT is (u0, v0, uz, vz). Note the ordering!
  // The covariance matrix for each pair of measurements is 2 x 2 and
  // the inverse of this is the error matrix E.
  // The error matrix for the whole set of n measurements is a diagonal
  // matrix with diagonal elements the individual 2 x 2 error matrices
  // (because the inverse of a diagonal matrix is a diagonal matrix
  // with each element the inverse of the original.)
  
  // The matrix 'matrix' in method 'CSCSegment::weightMatrix()' is this 
  // block-diagonal overall covariance matrix. It is inverted to the 
  // block-diagonal error matrix right before it is returned.
  
  // Use the matrix A defined by
  //    1   0   z1  0
  //    0   1   0   z1
  //    1   0   z2  0
  //    0   1   0   z2
  //    ..  ..  ..  ..
  //    1   0   zn  0
  //    0   1   0   zn
  
  // The matrix A is returned by 'CSCSegment::derivativeMatrix()'.
  
  // Then the normal equations are encapsulated in the matrix equation
  //
  //    (AT E A)p = (AT E)m
  //
  // where AT is the transpose of A.
  // We'll call the combined matrix on the LHS, M, and that on the RHS, B:
  //     M p = B
  
  // We solve this for the parameter vector, p.
  // The elements of M and B then involve sums over the hits
  
  // The 4 values in p are returned by 'CSCSegment::parameters()'
  // in the order uz, vz, u0, v0.
  // The error matrix of the parameters is obtained by 
  // (AT E A)^-1
  // calculated in 'CSCSegment::parametersErrors()'.
  
  // NOTE 1
  // It does the #hits = 2 case separately.
  // (I hope they're not on the same layer! They should not be, by construction.)
  
  // NOTE 2
  // We need local position of a RecHit w.r.t. the CHAMBER
  // and the RecHit itself only knows its local position w.r.t.
  // the LAYER, so we must explicitly transform global position.
  
  CLHEP::HepMatrix M(4,4,0);
  CLHEP::HepVector B(4,0);
  
  ChamberHitContainer::const_iterator ih = proto_segment.begin();
  
  for (ih = proto_segment.begin(); ih != proto_segment.end(); ++ih) {
    
    const CSCRecHit2D& hit = (**ih);
    const CSCLayer* layer = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp = layer->toGlobal(hit.localPosition());
    LocalPoint  lp  = theChamber->toLocal(gp); // FIX !!
    
    // ptc: Local position of hit w.r.t. chamber
    double u = lp.x();
    double v = lp.y();
    double z = lp.z();
    
    // ptc: Covariance matrix of local errors MUST BE CHECKED IF COMAPTIBLE
    CLHEP::HepMatrix IC(2,2);
    IC(1,1) = hit.localPositionError().xx();
    IC(1,2) = hit.localPositionError().xy();
    IC(2,1) = IC(1,2); // since Cov is symmetric
    IC(2,2) = hit.localPositionError().yy();
    
    // ptc: Invert covariance matrix (and trap if it fails!)
    int ierr = 0;
    IC.invert(ierr); // inverts in place
    if (ierr != 0) {
      LogDebug("CSC") << "CSCSegment::fitSlopes: failed to invert covariance matrix=\n" << IC << "\n";
      
      // @@ NOW WHAT TO DO? Exception? Return? Ignore?
    }
    
    // ptc: Note that IC is no longer Cov but Cov^-1
    M(1,1) += IC(1,1);
    M(1,2) += IC(1,2);
    M(1,3) += IC(1,1) * z;
    M(1,4) += IC(1,2) * z;
    B(1) += u * IC(1,1) + v * IC(1,2);
    
    M(2,1) += IC(2,1);
    M(2,2) += IC(2,2);
    M(2,3) += IC(2,1) * z;
    M(2,4) += IC(2,2) * z;
    B(2) += u * IC(2,1) + v * IC(2,2);
    
    M(3,1) += IC(1,1) * z;
    M(3,2) += IC(1,2) * z;
    M(3,3) += IC(1,1) * z * z;
    M(3,4) += IC(1,2) * z * z;
    B(3) += ( u * IC(1,1) + v * IC(1,2) ) * z;
    
    M(4,1) += IC(2,1) * z;
    M(4,2) += IC(2,2) * z;
    M(4,3) += IC(2,1) * z * z;
    M(4,4) += IC(2,2) * z * z;
    B(4) += ( u * IC(2,1) + v * IC(2,2) ) * z;
  }
  
  // Solve the matrix equation using CLHEP's 'solve'
  //@@ ptc: CAN solve FAIL?? UNCLEAR FROM (LACK OF) CLHEP DOC
  CLHEP::HepVector p = solve(M, B);
  
  // Update member variables uz, vz, theOrigin
  theOrigin = LocalPoint(p(1), p(2), 0.);
  uz = p(3);
  vz = p(4);
}

void CSCSegAlgoTC::fillChiSquared() {
  
  // The chi-squared is (m-Ap)T E (m-Ap)
  // where T denotes transpose.
  // This collapses to a simple sum over contributions from each
  // pair of measurements.
  float u0 = theOrigin.x();
  float v0 = theOrigin.y();
  double chsq = 0.;
  
  ChamberHitContainer::const_iterator ih;
  for (ih = proto_segment.begin(); ih != proto_segment.end(); ++ih) {
    
    const CSCRecHit2D& hit = (**ih);
    const CSCLayer* layer = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp = layer->toGlobal(hit.localPosition());
    LocalPoint lp = theChamber->toLocal(gp);  // FIX !!
    
    double hu = lp.x();
    double hv = lp.y();
    double hz = lp.z();
    
    double du = u0 + uz * hz - hu;
    double dv = v0 + vz * hz - hv;
    
    CLHEP::HepMatrix IC(2,2);
    IC(1,1) = hit.localPositionError().xx();
    IC(1,2) = hit.localPositionError().xy();
    IC(2,1) = IC(1,2);
    IC(2,2) = hit.localPositionError().yy();
    
    // Invert covariance matrix
    int ierr = 0;
    IC.invert(ierr);
    if (ierr != 0) {
      LogDebug("CSC") << "CSCSegment::fillChiSquared: failed to invert covariance matrix=\n" << IC << "\n";
      
      // @@ NOW WHAT TO DO? Exception? Return? Ignore?
    }
    
    chsq += du*du*IC(1,1) + 2.*du*dv*IC(1,2) + dv*dv*IC(2,2);
  }
  theChi2 = chsq;
}

void CSCSegAlgoTC::fillLocalDirection() {
  
  // Always enforce direction of segment to point from IP outwards
  // (Incorrect for particles not coming from IP, of course.)
  
  double dxdz = uz;
  double dydz = vz;
  double dz = 1./sqrt(1. + dxdz*dxdz + dydz*dydz);
  double dx = dz*dxdz;
  double dy = dz*dydz;
  LocalVector localDir(dx,dy,dz);
  
  // localDir may need sign flip to ensure it points outward from IP
  // ptc: Examine its direction and origin in global z: to point outward
  // the localDir should always have same sign as global z...
  
  double globalZpos = ( theChamber->toGlobal( theOrigin ) ).z();
  double globalZdir = ( theChamber->toGlobal( localDir ) ).z();
  double directionSign = globalZpos * globalZdir;
  
  theDirection = (directionSign * localDir).unit();
}

float CSCSegAlgoTC::phiAtZ(float z) const {
  
  // Returns a phi in [ 0, 2*pi )
  const CSCLayer* l1 = theChamber->layer(1);
  GlobalPoint gp = l1->toGlobal(theOrigin);     
  GlobalVector gv = l1->toGlobal(theDirection); 
  
  float x = gp.x() + (gv.x()/gv.z())*(z - gp.z());
  float y = gp.y() + (gv.y()/gv.z())*(z - gp.z());
  float phi = atan2(y, x);
  if (phi < 0.f) 
    phi += 2. * M_PI;
  
  return phi ;
}

void CSCSegAlgoTC::compareProtoSegment(const CSCRecHit2D* h, int layer) {
  
  // compare the chi2 of two segments
  double oldChi2 = theChi2;
  LocalPoint oldOrigin = theOrigin;
  LocalVector oldDirection = theDirection;
  ChamberHitContainer oldSegment = proto_segment;
  
  bool ok = replaceHit(h, layer);
  
  if (ok) {
    LogDebug("CSC") << "    hit in same layer as a hit on segment; try replacing old one..." 
                    << " chi2 new: " << theChi2 << " old: " << oldChi2 << "\n";
  }
  
  if ((theChi2 < oldChi2) && (ok)) {
    LogDebug("CSC")  << "    segment with replaced hit is better.\n";
  }
  else {
    proto_segment = oldSegment;
    theChi2 = oldChi2;
    theOrigin = oldOrigin;
    theDirection = oldDirection;
  }
}

void CSCSegAlgoTC::increaseProtoSegment(const CSCRecHit2D* h, int layer) {
  
  double oldChi2 = theChi2;
  LocalPoint oldOrigin = theOrigin;
  LocalVector oldDirection = theDirection;
  ChamberHitContainer oldSegment = proto_segment;
  
  bool ok = addHit(h, layer);
  
  if (ok) {
    LogDebug("CSC") << "    hit in new layer: added to segment, new chi2: " 
                    << theChi2 << "\n";
  }
  
  int ndf = 2*proto_segment.size() - 4;
  
  if (ok && ((ndf <= 0) || (theChi2/ndf < chi2Max))) {
    LogDebug("CSC") << "    segment with added hit is good.\n" ;                
  }     
  else {
    proto_segment = oldSegment;
    theChi2 = oldChi2;
    theOrigin = oldOrigin;
    theDirection = oldDirection;
  }                     
}               

bool CSCSegAlgoTC::areHitsCloseInLocalX(const CSCRecHit2D* h1, const CSCRecHit2D* h2) const {
  float h1x = h1->localPosition().x();
  float h2x = h2->localPosition().x();
  float deltaX = (h1->localPosition()-h2->localPosition()).x();
  LogDebug("CSC") << "    Hits at local x= " << h1x << ", " 
                  << h2x << " have separation= " << deltaX;
  return (fabs(deltaX) < (dRPhiMax))? true:false;   // +v
}

bool CSCSegAlgoTC::areHitsCloseInGlobalPhi(const CSCRecHit2D* h1, const CSCRecHit2D* h2) const {
  
  const CSCLayer* l1 = theChamber->layer(h1->cscDetId().layer());
  GlobalPoint gp1 = l1->toGlobal(h1->localPosition());  
  const CSCLayer* l2 = theChamber->layer(h2->cscDetId().layer());
  GlobalPoint gp2 = l2->toGlobal(h2->localPosition());  
  
  float h1p = gp1.phi();
  float h2p = gp2.phi();
  float dphi12 = h1p - h2p;
  
  // Into range [-pi, pi) (phi() returns values in this range)
  if (dphi12 < -M_PI) 
    dphi12 += 2.*M_PI;  
  if (dphi12 >  M_PI) 
    dphi12 -= 2.*M_PI;
  LogDebug("CSC") << "    Hits at global phi= " << h1p << ", " 
                  << h2p << " have separation= " << dphi12;
  return (fabs(dphi12) < dPhiMax)? true:false;  // +v
}

bool CSCSegAlgoTC::isHitNearSegment(const CSCRecHit2D* h) const {
  
  // Is hit near segment? 
  // Requires deltaphi and rxy*deltaphi within ranges specified
  // in orcarc, or by default, where rxy=sqrt(x**2+y**2) of hit itself.
  // Note that to make intuitive cuts on delta(phi) one must work in
  // phi range (-pi, +pi] not [0, 2pi
  
  const CSCLayer* l1 = theChamber->layer(h->cscDetId().layer());
  GlobalPoint hp = l1->toGlobal(h->localPosition());    
  
  float hphi = hp.phi();                  // in (-pi, +pi]
  if (hphi < 0.) 
    hphi += 2.*M_PI;     // into range [0, 2pi)
  float sphi = phiAtZ(hp.z());   // in [0, 2*pi)
  float phidif = sphi-hphi;
  if (phidif < 0.) 
    phidif += 2.*M_PI; // into range [0, 2pi)
  if (phidif > M_PI) 
    phidif -= 2.*M_PI; // into range (-pi, pi]
  
  float dRPhi = fabs(phidif)*hp.perp();
  LogDebug("CSC") << "    is hit at phi_h= " << hphi << " near segment phi_seg= " << sphi 
                  << "? is " << dRPhi << "<" << dRPhiFineMax << " ? " 
                  << " and is |" << phidif << "|<" << dPhiFineMax << " ?";
  
  return ((dRPhi < dRPhiFineMax) && 
          (fabs(phidif) < dPhiFineMax))? true:false;  // +v
}

bool CSCSegAlgoTC::hasHitOnLayer(int layer) const {
  
  // Is there is already a hit on this layer?
  ChamberHitContainerCIt it;
  
  for(it = proto_segment.begin(); it != proto_segment.end(); it++)
    if ((*it)->cscDetId().layer() == layer)
      return true; 
  
  return false;
}

void CSCSegAlgoTC::dumpHits(const ChamberHitContainer& rechits) const {
  
  // Dump positions of RecHit's in each CSCChamber
  ChamberHitContainerCIt it;
  
  for(it=rechits.begin(); it!=rechits.end(); it++) {
    
    const CSCLayer* l1 = theChamber->layer((*it)->cscDetId().layer());
    GlobalPoint gp1 = l1->toGlobal((*it)->localPosition());     
    
    LogDebug("CSC") << "Global pos.: " << gp1 << ", phi: " << gp1.phi() << ". Local position: "
                    << (*it)->localPosition() << ", phi: "
                    << (*it)->localPosition().phi() << ". Layer: "
                    << (*it)->cscDetId().layer() << "\n";
  }     
}


bool CSCSegAlgoTC::isSegmentGood(std::vector<ChamberHitContainer>::iterator seg, std::vector<double>::iterator chi2,
                                 const ChamberHitContainer& rechitsInChamber, BoolContainer& used) const {
  
  // Apply any selection cuts to segment
  
  // 1) Require a minimum no. of hits
  //   (@@ THESE VALUES SHOULD BECOME PARAMETERS?)
  
  // 2) Ensure no hits on segment are already assigned to another segment
  //    (typically of higher quality)
  
  unsigned int iadd = (rechitsInChamber.size() > 20 )?  1 : 0;  
  
  if (seg->size() < 3 + iadd)
    return false;
  
  // Additional part of alternative segment selection scheme: reject
  // segments with a chi2 probability of less than chi2ndfProbMin. Relies on list 
  // being sorted with "SegmentSorting == 2", that is first by nrechits and then 
  // by chi2prob in subgroups of same nr of rechits.

  if( SegmentSorting == 2 ){
    if( (*chi2) != 0 && ((2*seg->size())-4) >0 )  {
      if ( ChiSquaredProbability((*chi2),(double)(2*seg->size()-4)) < chi2ndfProbMin ) { 
        return false;
      }
    }
    if((*chi2) == 0 ) return false;
  }
  

  for(unsigned int ish = 0; ish < seg->size(); ++ish) {
    
    ChamberHitContainerCIt ib = rechitsInChamber.begin();
    
    for(ChamberHitContainerCIt ic = ib; ic != rechitsInChamber.end(); ++ic) {

      if(((*seg)[ish] == (*ic)) && used[ic-ib])
        return false;
    }
  }
  
  return true;
}

void CSCSegAlgoTC::flagHitsAsUsed(std::vector<ChamberHitContainer>::iterator seg, const ChamberHitContainer& rechitsInChamber, 
                                  BoolContainer& used) const {

  // Flag hits on segment as used

  ChamberHitContainerCIt ib = rechitsInChamber.begin();
   
  for(unsigned int ish = 0; ish < seg->size(); ish++) {

    for(ChamberHitContainerCIt iu = ib; iu != rechitsInChamber.end(); ++iu)
      if((*seg)[ish] == (*iu)) 
        used[iu-ib] = true;
  }
}

void CSCSegAlgoTC::pruneTheSegments(const ChamberHitContainer& rechitsInChamber) {
  
  // Sort the segment store according to segment 'quality' (chi2/#hits ?) and
  // remove any segments which contain hits assigned to higher-quality segments.
  
  if (candidates.empty()) 
    return;
  
  // Initialize flags that a given hit has been allocated to a segment
  BoolContainer used(rechitsInChamber.size(), false);
  
  // Sort by chi2/#hits
  segmentSort();
  
  // Select best quality segments, requiring hits are assigned to just one segment
  // Because I want to erase the bad segments, the iterator must be incremented
  // inside the loop, and only when the erase is not called

  std::vector<ChamberHitContainer>::iterator is;
  std::vector<double>::iterator ichi = chi2s.begin();
  std::vector<AlgebraicSymMatrix>::iterator iErr = errors.begin();
  std::vector<LocalPoint>::iterator iOrig = origins.begin();
  std::vector<LocalVector>::iterator iDir = directions.begin();

  for (is = candidates.begin();  is !=  candidates.end(); ) {
    
    bool goodSegment = isSegmentGood(is, ichi, rechitsInChamber, used);
    
    if (goodSegment) {
      LogDebug("CSC") << "Accepting segment: ";
      
      flagHitsAsUsed(is, rechitsInChamber, used);
      ++is;
      ++ichi;
      ++iErr;
      ++iOrig;
      ++iDir;
    }
    else {
      LogDebug("CSC") << "Rejecting segment: ";
      is = candidates.erase(is);
      ichi = chi2s.erase(ichi);
      iErr = errors.erase(iErr);
      iOrig = origins.erase(iOrig);
      iDir = directions.erase(iDir);
    }
  }
}

void CSCSegAlgoTC::segmentSort() {
  
  // The segment collection is sorted according chi2/#hits 
  
  for(unsigned int i=0; i<candidates.size()-1; i++) {
    for(unsigned int j=i+1; j<candidates.size(); j++) {
      
      ChamberHitContainer s1 = candidates[i];
      ChamberHitContainer s2 = candidates[j];
      if (i == j)
        continue;
      
      int n1 = candidates[i].size();
      int n2 = candidates[j].size();
      
      if( SegmentSorting == 2 ){ // Sort criterion: first sort by Nr of rechits, then in groups of rechits by chi2prob:
        if ( n2 > n1 ) { // sort by nr of rechits
          ChamberHitContainer temp = candidates[j];
          candidates[j] = candidates[i];
          candidates[i] = temp;
          
          double temp1 = chi2s[j];
          chi2s[j] = chi2s[i];
          chi2s[i] = temp1;
          
          AlgebraicSymMatrix temp2 = errors[j];
          errors[j] = errors[i];
          errors[i] = temp2;
          
          LocalPoint temp3 = origins[j];
          origins[j] = origins[i];
          origins[i] = temp3;
          
          LocalVector temp4 = directions[j];
          directions[j] = directions[i];
          directions[i] = temp4;
        }
        // sort by chi2 probability in subgroups with equal nr of rechits
        if(chi2s[i] != 0. && 2*n2-4 > 0 ) {
          if( n2 == n1 && (ChiSquaredProbability( chi2s[i],(double)(2*n1-4)) < ChiSquaredProbability(chi2s[j],(double)(2*n2-4))) ){
          ChamberHitContainer temp = candidates[j];
          candidates[j] = candidates[i];
          candidates[i] = temp;
          
          double temp1 = chi2s[j];
          chi2s[j] = chi2s[i];
          chi2s[i] = temp1;
          
          AlgebraicSymMatrix temp2 = errors[j];
          errors[j] = errors[i];
          errors[i] = temp2;
          
          LocalPoint temp3 = origins[j];
          origins[j] = origins[i];
          origins[i] = temp3;
          
          LocalVector temp4 = directions[j];
          directions[j] = directions[i];
          directions[i] = temp4;
          }
        }
      }
      else if( SegmentSorting == 1 ){
        if ((chi2s[i]/n1) > (chi2s[j]/n2)) {
          
          ChamberHitContainer temp = candidates[j];
          candidates[j] = candidates[i];
          candidates[i] = temp;
          
          double temp1 = chi2s[j];
          chi2s[j] = chi2s[i];
          chi2s[i] = temp1;
          
          AlgebraicSymMatrix temp2 = errors[j];
          errors[j] = errors[i];
          errors[i] = temp2;
          
          LocalPoint temp3 = origins[j];
          origins[j] = origins[i];
          origins[i] = temp3;
          
          LocalVector temp4 = directions[j];
          directions[j] = directions[i];
          directions[i] = temp4;
        }
      }
      else{
          LogDebug("CSC") << "No valid segment sorting specified - BAD !!!\n";
      }
    }
  }     
}

AlgebraicSymMatrix CSCSegAlgoTC::calculateError() const {
  
  AlgebraicSymMatrix weights = weightMatrix();
  AlgebraicMatrix A = derivativeMatrix();
  
  // (AT W A)^-1
  // from http://www.phys.ufl.edu/~avery/fitting.html, part I
  int ierr;
  AlgebraicSymMatrix result = weights.similarityT(A);
  result.invert(ierr);
  
  // blithely assuming the inverting never fails...
  return result;
}

CLHEP::HepMatrix CSCSegAlgoTC::derivativeMatrix() const {
  
  ChamberHitContainer::const_iterator it;
  int nhits = proto_segment.size();
  CLHEP::HepMatrix matrix(2*nhits, 4);
  int row = 0;
  
  for(it = proto_segment.begin(); it != proto_segment.end(); ++it) {
    
    const CSCRecHit2D& hit = (**it);
    const CSCLayer* layer = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp = layer->toGlobal(hit.localPosition());      
    LocalPoint lp = theChamber->toLocal(gp); // FIX
    float z = lp.z();
    ++row;
    matrix(row, 1) = 1.;
    matrix(row, 3) = z;
    ++row;
    matrix(row, 2) = 1.;
    matrix(row, 4) = z;
  }
  return matrix;
}


AlgebraicSymMatrix CSCSegAlgoTC::weightMatrix() const {
  
  std::vector<const CSCRecHit2D*>::const_iterator it;
  int nhits = proto_segment.size();
  AlgebraicSymMatrix matrix(2*nhits, 0);
  int row = 0;
  
  for (it = proto_segment.begin(); it != proto_segment.end(); ++it) {
    
    const CSCRecHit2D& hit = (**it);
    ++row;
    matrix(row, row)   = hit.localPositionError().xx();
    matrix(row, row+1) = hit.localPositionError().xy();
    ++row;
    matrix(row, row-1) = hit.localPositionError().xy();
    matrix(row, row)   = hit.localPositionError().yy();
  }
  int ierr;
  matrix.invert(ierr);
  return matrix;
}

void CSCSegAlgoTC::flipErrors( AlgebraicSymMatrix& a ) const { 
    
 // The CSCSegment needs the error matrix re-arranged 
   
 AlgebraicSymMatrix hold( a ); 
    
 // errors on slopes into upper left 
 a(1,1) = hold(3,3); 
 a(1,2) = hold(3,4); 
 a(2,1) = hold(4,3); 
 a(2,2) = hold(4,4); 
    
 // errors on positions into lower right 
 a(3,3) = hold(1,1); 
 a(3,4) = hold(1,2); 
 a(4,3) = hold(2,1); 
 a(4,4) = hold(2,2); 
    
 // off-diagonal elements remain unchanged 
    
}