/data/refman/pasoursint/CMSSW_5_3_10_patch2/src/RecoLocalMuon/CSCSegment/src/CSCSegAlgoDF.cc

Go to the documentation of this file.

#include "CSCSegAlgoDF.h"

#include "Geometry/CSCGeometry/interface/CSCLayer.h"
// For clhep Matrix::solve
#include "DataFormats/CLHEP/interface/AlgebraicObjects.h"

#include "DataFormats/GeometryVector/interface/GlobalPoint.h"

#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"

#include "CommonTools/Statistics/interface/ChiSquaredProbability.h"

#include "CSCSegAlgoPreClustering.h"
#include "CSCSegAlgoShowering.h"

#include <algorithm>
#include <cmath>
#include <iostream>
#include <string>


/* Constructor
 *
 */
CSCSegAlgoDF::CSCSegAlgoDF(const edm::ParameterSet& ps) : CSCSegmentAlgorithm(ps), myName("CSCSegAlgoDF") {
        
  debug                  = ps.getUntrackedParameter<bool>("CSCSegmentDebug");
  minLayersApart         = ps.getParameter<int>("minLayersApart");
  minHitsPerSegment      = ps.getParameter<int>("minHitsPerSegment");
  dRPhiFineMax           = ps.getParameter<double>("dRPhiFineMax");
  dPhiFineMax            = ps.getParameter<double>("dPhiFineMax");
  tanThetaMax            = ps.getParameter<double>("tanThetaMax");
  tanPhiMax              = ps.getParameter<double>("tanPhiMax");        
  chi2Max                = ps.getParameter<double>("chi2Max");  
  preClustering          = ps.getUntrackedParameter<bool>("preClustering");
  minHitsForPreClustering= ps.getParameter<int>("minHitsForPreClustering");
  nHitsPerClusterIsShower= ps.getParameter<int>("nHitsPerClusterIsShower");
  Pruning                = ps.getUntrackedParameter<bool>("Pruning");
  maxRatioResidual       = ps.getParameter<double>("maxRatioResidualPrune");

  preCluster_            = new CSCSegAlgoPreClustering( ps );
  showering_             = new CSCSegAlgoShowering( ps );
}


/* Destructor
 *
 */
CSCSegAlgoDF::~CSCSegAlgoDF() {
  delete preCluster_;
  delete showering_;
}


/* run
 *
 */
std::vector<CSCSegment> CSCSegAlgoDF::run(const CSCChamber* aChamber, ChamberHitContainer rechits) {

  // Store chamber info in temp memory
  theChamber = aChamber; 

  int nHits = rechits.size();

  // Segments prior to pruning
  std::vector<CSCSegment> segments_temp;  

  if ( preClustering && nHits > minHitsForPreClustering ) {
    // This is where the segment origin is in the chamber on avg.
    std::vector<CSCSegment> testSegments;
    std::vector<ChamberHitContainer> clusteredHits = preCluster_->clusterHits(theChamber, rechits);
    // loop over the found clusters:
    for (std::vector<ChamberHitContainer>::iterator subrechits = clusteredHits.begin(); subrechits != clusteredHits.end(); ++subrechits ) {
      // build the subset of segments:
      std::vector<CSCSegment> segs = buildSegments( (*subrechits) );
      // add the found subset of segments to the collection of all segments in this chamber:
      segments_temp.insert( segments_temp.end(), segs.begin(), segs.end() );
    }
  } else {
    std::vector<CSCSegment> segs = buildSegments( rechits );
    // add the found subset of segments to the collection of all segments in this chamber:
    segments_temp.insert( segments_temp.end(), segs.begin(), segs.end() ); 
  }

  return segments_temp; 
}


/* This builds segments by first creating proto-segments from at least 3 hits.
 * We intend to try all possible pairs of hits to start segment building. 'All possible' 
 * means each hit lies on different layers in the chamber.  Once a hit has been assigned 
 * to a segment, we don't consider it again, THAT IS, FOR THE FIRST PASS ONLY !
 * In fact, this is one of the possible flaw with the SK algorithms as it sometimes manages
 * to build segments with the wrong starting points.  In the DF algorithm, the endpoints
 * are tested as the best starting points in a 2nd loop.
 *
 * Also, only a certain muonsPerChamberMax maximum number of segments can be produced in the chamber
 */
std::vector<CSCSegment> CSCSegAlgoDF::buildSegments(ChamberHitContainer rechits) {

  // Clear buffer for segment vector
  std::vector<CSCSegment> segmentInChamber;
  segmentInChamber.clear();

  unsigned nHitInChamber = rechits.size();
  if ( nHitInChamber < 3 ) return segmentInChamber;

  LayerIndex layerIndex( nHitInChamber );

  unsigned nLayers = 0;
  int old_layer = -1;   
  for ( unsigned int i = 0; i < nHitInChamber; i++ ) {    
    int this_layer = rechits[i]->cscDetId().layer();
    layerIndex[i] = this_layer;
    if ( this_layer != old_layer ) {
      old_layer = this_layer;
      nLayers++;   
    }
  }
  
  if ( nLayers < 3 ) return segmentInChamber;

  double z1 = theChamber->layer(1)->position().z();
  double z6 = theChamber->layer(6)->position().z();
  
  if ( z1 > 0. ) {
    if ( z1 > z6 ) { 
      reverse( layerIndex.begin(), layerIndex.end() );
      reverse( rechits.begin(),    rechits.end() );
    }    
  }
  else if ( z1 < 0. ) {
    if ( z1 < z6 ) {
      reverse( layerIndex.begin(), layerIndex.end() );
      reverse( rechits.begin(),    rechits.end() );
    }    
  }

  // Showering muon
  if ( preClustering && int(nHitInChamber) > nHitsPerClusterIsShower && nLayers > 2 ) {
    CSCSegment segShower = showering_->showerSeg(theChamber, rechits);

    // Make sure have at least 3 hits...
    if ( segShower.nRecHits() < 3 ) return segmentInChamber;

    segmentInChamber.push_back(segShower);

    return segmentInChamber;
  }


  // Initialize flags that a given hit has been allocated to a segment
  BoolContainer used_ini(rechits.size(), false);
  usedHits = used_ini;
  
  ChamberHitContainerCIt ib = rechits.begin();
  ChamberHitContainerCIt ie = rechits.end();
    
  // Now Loop over hits within the chamber to find 1st seed for segment building
  for ( ChamberHitContainerCIt i1 = ib; i1 < ie; ++i1 ) {
    if ( usedHits[i1-ib] ) continue;

    const CSCRecHit2D* h1 = *i1;
    int layer1 = layerIndex[i1-ib];
    const CSCLayer* l1 = theChamber->layer(layer1);
    GlobalPoint gp1 = l1->toGlobal(h1->localPosition());
    LocalPoint lp1 = theChamber->toLocal(gp1);  
           
    // Loop over hits backward to find 2nd seed for segment building
    for ( ChamberHitContainerCIt i2 = ie-1; i2 > ib; --i2 ) {   

      if ( usedHits[i2-ib] ) continue;   // Hit has been used already

      int layer2 = layerIndex[i2-ib];
      if ( (layer2 - layer1) < minLayersApart ) continue;

      const CSCRecHit2D* h2 = *i2;
      const CSCLayer* l2 = theChamber->layer(layer2);
      GlobalPoint gp2 = l2->toGlobal(h2->localPosition());
      LocalPoint lp2 = theChamber->toLocal(gp2);  

      // Clear proto segment so it can be (re)-filled 
      protoSegment.clear();

      // localPosition is position of hit wrt layer (so local z = 0)
      protoIntercept = h1->localPosition();

      // We want hit wrt chamber (and local z will be != 0)
      float dz = gp2.z()-gp1.z();
      protoSlope_u = (lp2.x() - lp1.x())/dz ;
      protoSlope_v = (lp2.y() - lp1.y())/dz ;    

      // Test if entrance angle is roughly pointing towards IP
      if (fabs(protoSlope_v) > tanThetaMax) continue;
      if (fabs(protoSlope_u) > tanPhiMax ) continue;
     
      protoSegment.push_back(h1);
      protoSegment.push_back(h2);
        
      // Try adding hits to proto segment
      tryAddingHitsToSegment(rechits, i1, i2, layerIndex); 
        
      // Check no. of hits on segment to see if segment is large enough
      bool segok = true;
      unsigned iadd = 0;

      if (protoSegment.size() < minHitsPerSegment+iadd) segok = false;
  
      if ( Pruning && segok ) pruneFromResidual();

      // Check if segment satisfies chi2 requirement
      if (protoChi2 > chi2Max) segok = false;

      if ( segok ) {

        // Fill segment properties
       
        // Local direction
        double dz   = 1./sqrt(1. + protoSlope_u*protoSlope_u + protoSlope_v*protoSlope_v);
        double dx   = dz * protoSlope_u;
        double dy   = dz * protoSlope_v;
        LocalVector localDir(dx,dy,dz);
      
        // localDir may need sign flip to ensure it points outward from IP  
        double globalZpos    = ( theChamber->toGlobal( protoIntercept ) ).z();
        double globalZdir    = ( theChamber->toGlobal( localDir ) ).z();
        double directionSign = globalZpos * globalZdir;
        protoDirection       = (directionSign * localDir).unit();

        // Error matrix
        AlgebraicSymMatrix protoErrors = calculateError();     
        // but reorder components to match what's required by TrackingRecHit interface
        // i.e. slopes first, then positions
        flipErrors( protoErrors );

        CSCSegment temp(protoSegment, protoIntercept, protoDirection, protoErrors, protoChi2); 

        segmentInChamber.push_back(temp); 

        if (nHitInChamber-protoSegment.size() < 3) return segmentInChamber; 
        if (segmentInChamber.size() > 4) return segmentInChamber;

        // Flag used hits
        flagHitsAsUsed(rechits);
      } 
    } 
  }
  return segmentInChamber;
}


/* Method tryAddingHitsToSegment
 *
 * Look at left over hits and try to add them to proto segment by looking how far they
 * are from the segment in terms of the hit error matrix (so how many sigmas away).
 *
 */
void CSCSegAlgoDF::tryAddingHitsToSegment( const ChamberHitContainer& rechits, 
                                           const ChamberHitContainerCIt i1, 
                                           const ChamberHitContainerCIt i2,
                                           LayerIndex layerIndex ) {
  
/* Iterate over the layers with hits in the chamber
 * Skip the layers containing the segment endpoints on first pass, but then
 * try hits on layer containing the segment starting points on 2nd pass
 * if segment has >2 hits.  Once a hit is added to a layer, don't replace it 
 * until 2nd iteration
 */  
  
  ChamberHitContainerCIt ib = rechits.begin();
  ChamberHitContainerCIt ie = rechits.end();
  closeHits.clear();

  for ( ChamberHitContainerCIt i = ib; i != ie; ++i ) {

    if (i == i1 || i == i2 ) continue;
    if ( usedHits[i-ib] ) continue;   // Don't use hits already part of a segment.

    const CSCRecHit2D* h = *i;
    int layer = layerIndex[i-ib];
    int layer1 = layerIndex[i1-ib];
    int layer2 = layerIndex[i2-ib];

    // Low multiplicity case
    if (rechits.size() < 9) {
      if ( isHitNearSegment( h ) ) {
        if ( !hasHitOnLayer(layer) ) {
          addHit(h, layer);
        } else {
          closeHits.push_back(h);
        }
      }

    // High multiplicity case
    } else { 
      if ( isHitNearSegment( h ) ) {
        if ( !hasHitOnLayer(layer) ) {
          addHit(h, layer);
          updateParameters();
        // Don't change the starting points at this stage !!!
        } else {
          closeHits.push_back(h);
          if (layer != layer1 && layer != layer2 ) compareProtoSegment(h, layer);
        }
      }
    }
  }
 
  if ( int(protoSegment.size()) < 3) return;

  updateParameters();

  // 2nd pass to remove biases 
  // This time, also consider changing the endpoints
  for ( ChamberHitContainerCIt i = closeHits.begin() ; i != closeHits.end(); ++i ) {      
    const CSCRecHit2D* h = *i;      
    int layer = (*i)->cscDetId().layer();     
    compareProtoSegment(h, layer); 
  } 

}


/* isHitNearSegment
 *
 * Compare rechit with expected position from proto_segment
 */
bool CSCSegAlgoDF::isHitNearSegment( const CSCRecHit2D* hit) const {

  const CSCLayer* layer = theChamber->layer(hit->cscDetId().layer());

  // hit phi position in global coordinates
  GlobalPoint Hgp = layer->toGlobal(hit->localPosition());
  double Hphi = Hgp.phi();                                
  if (Hphi < 0.) Hphi += 2.*M_PI;
  LocalPoint Hlp = theChamber->toLocal(Hgp);
  double z = Hlp.z();  

  double LocalX = protoIntercept.x() + protoSlope_u * z;
  double LocalY = protoIntercept.y() + protoSlope_v * z;
  LocalPoint Slp(LocalX, LocalY, z);
  GlobalPoint Sgp = theChamber->toGlobal(Slp); 
  double Sphi = Sgp.phi();
  if (Sphi < 0.) Sphi += 2.*M_PI;
  double R = sqrt(Sgp.x()*Sgp.x() + Sgp.y()*Sgp.y());
  
  double deltaPhi = Sphi - Hphi;
  if (deltaPhi >  2.*M_PI) deltaPhi -= 2.*M_PI;
  if (deltaPhi < -2.*M_PI) deltaPhi += 2.*M_PI;
  if (deltaPhi < 0.) deltaPhi = -deltaPhi; 

  double RdeltaPhi = R * deltaPhi;

  if (RdeltaPhi < dRPhiFineMax && deltaPhi < dPhiFineMax ) return true;

  return false;
}


/* Method addHit
 *
 * Test if can add hit to proto segment. If so, try to add it.
 *
 */
bool CSCSegAlgoDF::addHit(const CSCRecHit2D* aHit, int layer) {
  
  // Return true if hit was added successfully and then parameters are updated.
  // Return false if there is already a hit on the same layer, or insert failed.
  
  bool ok = true;
  
  // Test that we are not trying to add the same hit again
  for ( ChamberHitContainer::const_iterator it = protoSegment.begin(); it != protoSegment.end(); it++ ) 
    if ( aHit == (*it)  ) return false;
  
  protoSegment.push_back(aHit);

  return ok;
}    


/* Method updateParameters
 *      
 * Perform a simple Least Square Fit on proto segment to determine slope and intercept
 *
 */   
void CSCSegAlgoDF::updateParameters() {

  // Compute slope from Least Square Fit    
  CLHEP::HepMatrix M(4,4,0);
  CLHEP::HepVector B(4,0);

  ChamberHitContainer::const_iterator ih;
  
  for (ih = protoSegment.begin(); ih != protoSegment.end(); ++ih) {
    
    const CSCRecHit2D& hit = (**ih);
    const CSCLayer* layer  = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp         = layer->toGlobal(hit.localPosition());
    LocalPoint  lp         = theChamber->toLocal(gp); 
    
    double u = lp.x();
    double v = lp.y();
    double z = lp.z();
    
    // ptc: Covariance matrix of local errors 
    CLHEP::HepMatrix IC(2,2);
    IC(1,1) = hit.localPositionError().xx();
    IC(1,2) = hit.localPositionError().xy();
    IC(2,2) = hit.localPositionError().yy();
    IC(2,1) = IC(1,2); // since Cov is symmetric
    
    // ptc: Invert covariance matrix (and trap if it fails!)
    int ierr = 0;
    IC.invert(ierr); // inverts in place
    if (ierr != 0) {
      LogDebug("CSC") << "CSCSegment::fitSlopes: failed to invert covariance matrix=\n" << IC << "\n";      
    }
    
    M(1,1) += IC(1,1);
    M(1,2) += IC(1,2);
    M(1,3) += IC(1,1) * z;
    M(1,4) += IC(1,2) * z;
    B(1)   += u * IC(1,1) + v * IC(1,2);
    
    M(2,1) += IC(2,1);
    M(2,2) += IC(2,2);
    M(2,3) += IC(2,1) * z;
    M(2,4) += IC(2,2) * z;
    B(2)   += u * IC(2,1) + v * IC(2,2);
    
    M(3,1) += IC(1,1) * z;
    M(3,2) += IC(1,2) * z;
    M(3,3) += IC(1,1) * z * z;
    M(3,4) += IC(1,2) * z * z;
    B(3)   += ( u * IC(1,1) + v * IC(1,2) ) * z;
    
    M(4,1) += IC(2,1) * z;
    M(4,2) += IC(2,2) * z;
    M(4,3) += IC(2,1) * z * z;
    M(4,4) += IC(2,2) * z * z;
    B(4)   += ( u * IC(2,1) + v * IC(2,2) ) * z;
  }
  
  CLHEP::HepVector p = solve(M, B);
  
  // Update member variables 
  // Note that origin has local z = 0

  protoIntercept = LocalPoint(p(1), p(2), 0.);
  protoSlope_u = p(3);
  protoSlope_v = p(4);


  // Determine Chi^2 for the proto wire segment
  
  double chsq = 0.;
  
  for (ih = protoSegment.begin(); ih != protoSegment.end(); ++ih) {
    
    const CSCRecHit2D& hit = (**ih);
    const CSCLayer* layer  = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp         = layer->toGlobal(hit.localPosition());
    LocalPoint lp          = theChamber->toLocal(gp);
    
    double u = lp.x();
    double v = lp.y();
    double z = lp.z();
    
    double du = protoIntercept.x() + protoSlope_u * z - u;
    double dv = protoIntercept.y() + protoSlope_v * z - v;
    
    CLHEP::HepMatrix IC(2,2);
    IC(1,1) = hit.localPositionError().xx();
    IC(1,2) = hit.localPositionError().xy();
    IC(2,2) = hit.localPositionError().yy();
    IC(2,1) = IC(1,2);
    
    // Invert covariance matrix
    int ierr = 0;
    IC.invert(ierr);
    if (ierr != 0) {
      LogDebug("CSC") << "CSCSegment::fillChiSquared: failed to invert covariance matrix=\n" << IC << "\n";      
    }
    chsq += du*du*IC(1,1) + 2.*du*dv*IC(1,2) + dv*dv*IC(2,2);
  }
  protoChi2 = chsq;
}


/* hasHitOnLayer
 *
 * Just make sure hit to be added to layer comes from different layer than those in proto segment   
 */
bool CSCSegAlgoDF::hasHitOnLayer(int layer) const {
  
  // Is there already a hit on this layer?
  for ( ChamberHitContainerCIt it = protoSegment.begin(); it != protoSegment.end(); it++ )
    if ( (*it)->cscDetId().layer() == layer ) return true;
  
  return false;
}


/* Method compareProtoSegment
 *      
 * For hit coming from the same layer of an existing hit within the proto segment
 * test if achieve better chi^2 by using this hit than the other
 *
 */ 
void CSCSegAlgoDF::compareProtoSegment(const CSCRecHit2D* h, int layer) {
  
  // Store old segment first
  double old_protoChi2                  = protoChi2;
  LocalPoint old_protoIntercept         = protoIntercept;
  float old_protoSlope_u                = protoSlope_u;
  float old_protoSlope_v                = protoSlope_v;
  LocalVector old_protoDirection        = protoDirection;
  ChamberHitContainer old_protoSegment  = protoSegment;
 

  // Try adding the hit to existing segment, and remove old one existing in same layer
  ChamberHitContainer::iterator it;
  for ( it = protoSegment.begin(); it != protoSegment.end(); ) {
    if ( (*it)->cscDetId().layer() == layer ) {
      it = protoSegment.erase(it);
    } else {
      ++it;
    }
  }
  bool ok = addHit(h, layer);

  if (ok) updateParameters();
  
  if ( (protoChi2 > old_protoChi2) || ( !ok ) ) {
    protoChi2       = old_protoChi2;
    protoIntercept  = old_protoIntercept;
    protoSlope_u    = old_protoSlope_u;
    protoSlope_v    = old_protoSlope_v;
    protoDirection  = old_protoDirection;
    protoSegment    = old_protoSegment;
  }
}


/* Method flagHitsAsUsed
 *
 * Flag hits which have entered segment building so we don't reuse them.
 * Also flag does which were very close to segment to reduce combinatorics
 */
void CSCSegAlgoDF::flagHitsAsUsed(const ChamberHitContainer& rechitsInChamber) {
  
  // Flag hits on segment as used
  ChamberHitContainerCIt ib = rechitsInChamber.begin();
  ChamberHitContainerCIt hi, iu;
  
  for ( hi = protoSegment.begin(); hi != protoSegment.end(); ++hi ) {
    for ( iu = ib; iu != rechitsInChamber.end(); ++iu ) {
      if (*hi == *iu) usedHits[iu-ib] = true;
    }
  }
  // Don't reject hits marked as "nearby" for now.
  // So this is bypassed at all times for now !!!
  // Perhaps add back to speed up algorithm some more
  if (closeHits.size() > 0) return;  
  for ( hi = closeHits.begin(); hi != closeHits.end(); ++hi ) {
    for ( iu = ib; iu != rechitsInChamber.end(); ++iu ) {
      if (*hi == *iu) usedHits[iu-ib] = true;
    }
  }

}


AlgebraicSymMatrix CSCSegAlgoDF::weightMatrix() const {

  std::vector<const CSCRecHit2D*>::const_iterator it;
  int nhits = protoSegment.size();
  AlgebraicSymMatrix matrix(2*nhits, 0);
  int row = 0;

  for (it = protoSegment.begin(); it != protoSegment.end(); ++it) {

    const CSCRecHit2D& hit = (**it);
    ++row;
    matrix(row, row)   = hit.localPositionError().xx();
    matrix(row, row+1) = hit.localPositionError().xy();
    ++row;
    matrix(row, row-1) = hit.localPositionError().xy();
    matrix(row, row)   = hit.localPositionError().yy();
  }
  int ierr;
  matrix.invert(ierr);
  return matrix;
}


CLHEP::HepMatrix CSCSegAlgoDF::derivativeMatrix() const {

  ChamberHitContainer::const_iterator it;
  int nhits = protoSegment.size();
  CLHEP::HepMatrix matrix(2*nhits, 4);
  int row = 0;

  for(it = protoSegment.begin(); it != protoSegment.end(); ++it) {

    const CSCRecHit2D& hit = (**it);
    const CSCLayer* layer = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp = layer->toGlobal(hit.localPosition());
    LocalPoint lp = theChamber->toLocal(gp);
    float z = lp.z();
    ++row;
    matrix(row, 1) = 1.;
    matrix(row, 3) = z;
    ++row;
    matrix(row, 2) = 1.;
    matrix(row, 4) = z;
  }
  return matrix;
}

/* calculateError
 *
 */
AlgebraicSymMatrix CSCSegAlgoDF::calculateError() const {

  AlgebraicSymMatrix weights = weightMatrix();
  AlgebraicMatrix A = derivativeMatrix();

  // (AT W A)^-1
  // from http://www.phys.ufl.edu/~avery/fitting.html, part I
  int ierr;
  AlgebraicSymMatrix result = weights.similarityT(A);
  result.invert(ierr);

  // blithely assuming the inverting never fails...
  return result;
}

void CSCSegAlgoDF::flipErrors( AlgebraicSymMatrix& a ) const {

  // The CSCSegment needs the error matrix re-arranged

  AlgebraicSymMatrix hold( a );

  // errors on slopes into upper left
  a(1,1) = hold(3,3);
  a(1,2) = hold(3,4);
  a(2,1) = hold(4,3);
  a(2,2) = hold(4,4);

  // errors on positions into lower right
  a(3,3) = hold(1,1);
  a(3,4) = hold(1,2);
  a(4,3) = hold(2,1);
  a(4,4) = hold(2,2);

  // off-diagonal elements remain unchanged

}


// Try to clean up segments by quickly looking at residuals
void CSCSegAlgoDF::pruneFromResidual(){

  // Only prune if have at least 5 hits 
  if ( protoSegment.size() < 5 ) return ;


  // Now Study residuals
      
  float maxResidual = 0.;
  float sumResidual = 0.;
  int nHits = 0;
  int badIndex = -1;
  int j = 0;


  ChamberHitContainer::const_iterator ih;

  for ( ih = protoSegment.begin(); ih != protoSegment.end(); ++ih ) {
    const CSCRecHit2D& hit = (**ih);
    const CSCLayer* layer  = theChamber->layer(hit.cscDetId().layer());
    GlobalPoint gp         = layer->toGlobal(hit.localPosition());
    LocalPoint lp          = theChamber->toLocal(gp);

    double u = lp.x();
    double v = lp.y();
    double z = lp.z();

    double du = protoIntercept.x() + protoSlope_u * z - u;
    double dv = protoIntercept.y() + protoSlope_v * z - v;

    float residual = sqrt(du*du + dv*dv);

    sumResidual += residual;
    nHits++;
    if ( residual > maxResidual ) {
      maxResidual = residual;
      badIndex = j;
    }
    j++;
  }

  float corrAvgResidual = (sumResidual - maxResidual)/(nHits -1);

  // Keep all hits 
  if ( maxResidual/corrAvgResidual < maxRatioResidual ) return;


  // Drop worse hit and recompute segment properties + fill

  ChamberHitContainer newProtoSegment;

  j = 0;
  for ( ih = protoSegment.begin(); ih != protoSegment.end(); ++ih ) {
    if ( j != badIndex ) newProtoSegment.push_back(*ih);
    j++;
  }
  
  protoSegment.clear();

  for ( ih = newProtoSegment.begin(); ih != newProtoSegment.end(); ++ih ) {
    protoSegment.push_back(*ih);
  }

  // Update segment parameters
  updateParameters();

}


/*
 * Order the hits such that 2nd one is closest in x,y to first seed hit in global coordinates
 */
void CSCSegAlgoDF::orderSecondSeed( GlobalPoint gp1,
                                           const ChamberHitContainerCIt i1, 
                                           const ChamberHitContainerCIt i2, 
                                           const ChamberHitContainer& rechits, 
                                           LayerIndex layerIndex ) {

  secondSeedHits.clear();

  //ChamberHitContainerCIt ib = rechits.begin();
  ChamberHitContainerCIt ie = rechits.end();

  //  int layer1 = layerIndex[i1-ib];
  //  int layer2 = layerIndex[i2-ib];


  // Now fill vector of rechits closest to center of mass:
  // secondSeedHitsIdx.clear() = 0;

  // Loop over all hits and find hit closest to 1st seed.
  for ( ChamberHitContainerCIt i2 = ie-1; i2 > i1; --i2 ) {     


  }

        
}