/data/refman/pasoursint/CMSSW_5_3_1/src/EventFilter/EcalRawToDigi/src/DCCFEBlock.cc

Go to the documentation of this file.

#include "EventFilter/EcalRawToDigi/interface/DCCFEBlock.h"
#include "EventFilter/EcalRawToDigi/interface/DCCEventBlock.h"
#include "EventFilter/EcalRawToDigi/interface/DCCDataUnpacker.h"
#include <stdio.h>
#include "EventFilter/EcalRawToDigi/interface/EcalElectronicsMapper.h"



DCCFEBlock::DCCFEBlock( DCCDataUnpacker * u, EcalElectronicsMapper * m, DCCEventBlock * e,bool unpack, bool forceToKeepFRdata)
  : DCCDataBlockPrototype(u,m,e,unpack), checkFeId_(false), forceToKeepFRdata_(forceToKeepFRdata) {
   
  expXtalTSamples_           = mapper_->numbXtalTSamples();
  numbDWInXtalBlock_         = (expXtalTSamples_-2)/4+1;
  unfilteredDataBlockLength_ = mapper_->getUnfilteredTowerBlockLength();
  xtalGains_                 = new short[expXtalTSamples_]; 
  
}


void DCCFEBlock::updateCollectors(){

  invalidBlockLengths_    = unpacker_->invalidBlockLengthsCollection();
  invalidTTIds_           = unpacker_->invalidTTIdsCollection();
  invalidZSXtalIds_       = unpacker_->invalidZSXtalIdsCollection();
}



int DCCFEBlock::unpack(uint64_t ** data, unsigned int * dwToEnd, bool zs, unsigned int expectedTowerID){
  
  zs_      = zs;  
  datap_   = data;
  data_    = *data;
  dwToEnd_ = dwToEnd;
  
  const unsigned int activeDCC = mapper_->getActiveSM();

  if( (*dwToEnd_)<1){
    if( ! DCCDataUnpacker::silentMode_ ){
      edm::LogWarning("IncorrectEvent")
        <<"\n Unable to unpack Tower block for event "<<event_->l1A()<<" in fed "<<activeDCC
        <<"\n The end of event was reached "
        <<"\n(or, previously, pointers intended to navigate outside of FedBlock (based on block sizes), and were stopped by setting dwToEnd_ to zero)"    ;
      //TODO : add this to a dcc event size collection error?
    }
    return STOP_EVENT_UNPACKING;
  }
  
  lastStripId_     = 0;
  lastXtalId_      = 0;
  expTowerID_      = expectedTowerID;
  
  
  //Point to begin of block
  data_++;
  
  towerId_           = ( *data_ )                   & TOWER_ID_MASK;
  nTSamples_         = ( *data_>>TOWER_NSAMP_B  )   & TOWER_NSAMP_MASK; 
  bx_                = ( *data_>>TOWER_BX_B     )   & TOWER_BX_MASK;
  l1_                = ( *data_>>TOWER_L1_B     )   & TOWER_L1_MASK;
  blockLength_       = ( *data_>>TOWER_LENGTH_B )   & TOWER_LENGTH_MASK;
  
  event_->setFESyncNumbers(l1_,bx_, (short)(expTowerID_-1));

  //debugging
  //display(cout);


  
  // check that expected fe_id==fe_expected is on
  if (checkFeId_              &&
      expTowerID_ != towerId_ &&
      expTowerID_ <= mapper_->getNumChannelsInDcc(activeDCC) ){ // fe_id must be within range foreseen in the FED 
    if (! DCCDataUnpacker::silentMode_) {
      edm::LogWarning("IncorrectBlock")
        << "Expected tower ID is " << expTowerID_ << " while " << towerId_ << " was found"
        << " (L1A " << event_->l1A() << " fed " << mapper_->getActiveDCC() << ")\n"
        << "  => Skipping to next FE block...";
    }
    
    fillEcalElectronicsError(invalidTTIds_); 
    
    updateEventPointers();
    return SKIP_BLOCK_UNPACKING;
  }

  // check that expected fe_id==fe_expected is off
  else if( (!checkFeId_) && 
           towerId_ > mapper_->getNumChannelsInDcc(activeDCC) ){ // fe_id must still be within range foreseen in the FED 
    if( ! DCCDataUnpacker::silentMode_ ){
      edm::LogWarning("IncorrectBlock")
        <<"For event "<<event_->l1A()<<" and fed "<<mapper_->getActiveDCC()<<" (there's no check fe_id==dcc_channel)"
        <<"\n the FE_id found: "<<towerId_<<" exceeds max number of FE foreseen in fed"
        <<"\n => Skipping to next FE block...";
    }
    
    updateEventPointers();
    return SKIP_BLOCK_UNPACKING;
  }
  
  // Check synchronization
  if (sync_) {
    const unsigned int dccBx = (event_->bx())  & TCC_BX_MASK;
    const unsigned int dccL1 = (event_->l1A()) & TCC_L1_MASK;
    const unsigned int fov   = (event_->fov()) & H_FOV_MASK;
    
    if (! isSynced(dccBx, bx_, dccL1, l1_, FE_MEM, fov)) {
      if (! DCCDataUnpacker::silentMode_) {
        // TODO: add check for status from Channel Status DB
        
        edm::LogWarning("IncorrectBlock")
          << "Synchronization error for Tower Block"
          << " (L1A " << event_->l1A() << " bx " << event_->bx() << " fed " << mapper_->getActiveDCC() << " tower " << towerId_ << ")\n"
          << "  dccBx = " << dccBx << " bx_ = " << bx_ << " dccL1 = " << dccL1 << " l1_ = " << l1_ << "\n"
          << "  => Skipping to next tower block";
      }
      
      //Note : add to error collection ?
      updateEventPointers();
      return SKIP_BLOCK_UNPACKING;
    }
  }
  
  // check number of samples
  if( nTSamples_ != expXtalTSamples_ ){
    if( ! DCCDataUnpacker::silentMode_ ){
      edm::LogWarning("IncorrectBlock")
        <<"Unable to unpack Tower Block "<<towerId_<<" for event L1A "<<event_->l1A()<<" in fed "<<mapper_->getActiveDCC()
        <<"\n Number of time samples "<<nTSamples_<<" is not the same as expected ("<<expXtalTSamples_<<")"
        <<"\n => Skipping to next tower block...";
     } 
    //Note : add to error collection ?                 
    updateEventPointers();
    return SKIP_BLOCK_UNPACKING;
  }

  
  xtalBlockSize_     = numbDWInXtalBlock_*8;
  blockSize_           = blockLength_*8;  
  
  if((*dwToEnd_)<blockLength_){
    if( ! DCCDataUnpacker::silentMode_ ){
      edm::LogWarning("IncorrectEvent")
        <<"\n Unable to unpack Tower Block "<<towerId_<<" for event L1A "<<event_->l1A()<<" in fed "<<mapper_->getActiveDCC()
        <<"\n Only "<<((*dwToEnd_)*8)<<" bytes are available while "<<blockSize_<<" are needed!"
        <<"\n => Skipping to next fed block...";
    }
    //TODO : add to error collections
    return STOP_EVENT_UNPACKING;
  }


  if(!zs_ && !forceToKeepFRdata_){
         
    if ( unfilteredDataBlockLength_ != blockLength_ ){
      if( ! DCCDataUnpacker::silentMode_ ){ 
        edm::LogWarning("IncorrectEvent")
          <<"\n For event L1A "<<event_->l1A()<<", fed "<<mapper_->getActiveDCC()<<" and tower "<<towerId_
          <<"\n Expected block size is "<<(unfilteredDataBlockLength_*8)<<" bytes while "<<(blockLength_*8)<<" was found"
          <<"\n => Skipping to next fed block...";
       }

      fillEcalElectronicsError(invalidBlockLengths_) ;

      //Safer approach...  - why pointers do not navigate in this case?
      return STOP_EVENT_UNPACKING;          

      
    }

    
  }
  else if (!zs && forceToKeepFRdata_){

     if ( unfilteredDataBlockLength_ != blockLength_ ){
      if( ! DCCDataUnpacker::silentMode_ ){ 
        edm::LogWarning("IncorrectBlock")
          <<"For event L1A "<<event_->l1A()<<", fed "<<mapper_->getActiveDCC()<<" and tower "<<towerId_
          <<"\n Expected block size is "<<(unfilteredDataBlockLength_*8)<<" bytes while "<<(blockLength_*8)<<" was found"
          <<"\n => Keeps unpacking as the unpacker was forced to keep FR data (by configuration) ...";
       }

      fillEcalElectronicsError(invalidBlockLengths_) ;
     }

  }
  else if( blockLength_ > unfilteredDataBlockLength_ || (blockLength_-1) < numbDWInXtalBlock_ ){
    if( ! DCCDataUnpacker::silentMode_ ){
      edm::LogWarning("IncorrectEvent")
        <<"\n For event L1A "<<event_->l1A()<<" and fed "<<mapper_->getActiveDCC()
        <<"\n The tower "<<towerId_<<" has a wrong number of bytes : "<<(blockLength_*8)           
        <<"\n => Skipping to next fed block...";
     }

     fillEcalElectronicsError(invalidBlockLengths_) ;


    //Safer approach... - why pointers do not navigate in this case?
    return STOP_EVENT_UNPACKING;
  }
  


  // If the HLT says to skip this tower we skip it...
  if( ! event_->getHLTChannel(towerId_) ){
    updateEventPointers();
    return SKIP_BLOCK_UNPACKING;
  }





  unsigned int numbOfXtalBlocks = (blockLength_-1)/numbDWInXtalBlock_; 

  // get XTAL Data
  unsigned int expStripID(0), expXtalID(0);
  //point to xtal data
  data_++;
  
  int statusUnpackXtal =0;

  for(unsigned int numbXtal=1; numbXtal <= numbOfXtalBlocks && statusUnpackXtal!= SKIP_BLOCK_UNPACKING; numbXtal++){

    
    if(!zs_ && ! forceToKeepFRdata_){
      expStripID  = ( numbXtal-1)/5 + 1;        
      expXtalID   =  numbXtal - (expStripID-1)*5;
    }
    
    statusUnpackXtal = unpackXtalData(expStripID,expXtalID);
    if (statusUnpackXtal== SKIP_BLOCK_UNPACKING)
      {
        if( ! DCCDataUnpacker::silentMode_ ){
            edm::LogWarning("IncorrectBlock")
            <<"For event L1A "<<event_->l1A()<<" and fed "<<mapper_->getActiveDCC()
            <<"\n The tower "<<towerId_<<" won't be unpacked further";
        }
      }

  }// end loop over xtals of given FE 

  updateEventPointers();
  return BLOCK_UNPACKED;                
  
}




void DCCFEBlock::display(std::ostream& o){

  o<<"\n Unpacked Info for DCC Tower Block"
  <<"\n DW1 ============================="
  <<"\n Tower Id "<<towerId_
  <<"\n Numb Samp "<<nTSamples_
  <<"\n Bx "<<bx_
  <<"\n L1 "<<l1_
  <<"\n blockLength "<<blockLength_;  
}