/data/refman/pasoursint/CMSSW_5_2_7_hltpatch2/src/FastSimulation/TrackerSetup/src/TrackerInteractionGeometry.cc

Go to the documentation of this file.

//Framework Headers
#include "FWCore/Utilities/interface/Exception.h"
#include "FWCore/ParameterSet/interface/ParameterSet.h"

//CMSSW Headers
#include "DataFormats/GeometrySurface/interface/Surface.h"
#include "DataFormats/GeometrySurface/interface/BoundCylinder.h"
#include "DataFormats/GeometrySurface/interface/SimpleCylinderBounds.h"
#include "DataFormats/GeometrySurface/interface/BoundDisk.h"
#include "DataFormats/GeometrySurface/interface/SimpleDiskBounds.h"

// Tracker/Tracking Headers
#include "RecoTracker/TkDetLayers/interface/GeometricSearchTracker.h"
#include "TrackingTools/DetLayers/interface/BarrelDetLayer.h"
#include "TrackingTools/DetLayers/interface/ForwardDetLayer.h"

//FAMOS Headers
#include "FastSimulation/TrackerSetup/interface/TrackerInteractionGeometry.h"

#include<iostream>

TrackerInteractionGeometry::TrackerInteractionGeometry(const edm::ParameterSet& trackerMaterial,
                                                       const GeometricSearchTracker* theGeomSearchTracker)
{
 
  // Fraction of radiation length : had oc values to account 
  // for detectors, cables, support, ...
  // Note : the second argument is not used in FAMOS
  // Note : the first argument is tuned to reproduce the CMSIM material
  //        in terms or radiation length.


  // Thickness of all layers
  // Version of the material description
  version = trackerMaterial.getParameter<unsigned int>("TrackerMaterialVersion");
  // Beam Pipe
  beamPipeThickness = trackerMaterial.getParameter<std::vector<double> >("BeamPipeThickness");
  // Pixel Barrel Layers 1-3
  pxbThickness = trackerMaterial.getParameter<std::vector<double> >("PXBThickness");
  // Pixel Barrel services at the end of layers 1-3
  pxb1CablesThickness = trackerMaterial.getParameter<std::vector<double> >("PXB1CablesThickness");
  pxb2CablesThickness = trackerMaterial.getParameter<std::vector<double> >("PXB2CablesThickness");
  pxb3CablesThickness = trackerMaterial.getParameter<std::vector<double> >("PXB3CablesThickness");
  // Pixel Barrel outside cables
  pxbOutCables1Thickness = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables1Thickness");
  pxbOutCables2Thickness = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables2Thickness");
  // Pixel Disks 1-2
  pxdThickness = trackerMaterial.getParameter<std::vector<double> >("PXDThickness");
  // Pixel Endcap outside cables
  pxdOutCables1Thickness = trackerMaterial.getParameter<std::vector<double> >("PXDOutCables1Thickness");
  pxdOutCables2Thickness = trackerMaterial.getParameter<std::vector<double> >("PXDOutCables2Thickness");
  // Tracker Inner barrel layers 1-4
  tibLayer1Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBLayer1Thickness");
  tibLayer2Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBLayer2Thickness");
  tibLayer3Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBLayer3Thickness");
  tibLayer4Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBLayer4Thickness");
  // TIB outside services (endcap)
  tibOutCables1Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables1Thickness");
  tibOutCables2Thickness = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables2Thickness");
  // Tracker Inner disks layers 1-3
  tidLayer1Thickness = trackerMaterial.getParameter<std::vector<double> >("TIDLayer1Thickness");
  tidLayer2Thickness = trackerMaterial.getParameter<std::vector<double> >("TIDLayer2Thickness");
  tidLayer3Thickness = trackerMaterial.getParameter<std::vector<double> >("TIDLayer3Thickness");
  // TID outside wall (endcap)
  tidOutsideThickness = trackerMaterial.getParameter<std::vector<double> >("TIDOutsideThickness");
  // TOB inside wall (barrel)
  tobInsideThickness = trackerMaterial.getParameter<std::vector<double> >("TOBInsideThickness");
  // Tracker Outer barrel layers 1-6
  tobLayer1Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer1Thickness");
  tobLayer2Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer2Thickness");
  tobLayer3Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer3Thickness");
  tobLayer4Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer4Thickness");
  tobLayer5Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer5Thickness");
  tobLayer6Thickness = trackerMaterial.getParameter<std::vector<double> >("TOBLayer6Thickness");
  // TOB services (endcap)
  tobOutsideThickness = trackerMaterial.getParameter<std::vector<double> >("TOBOutsideThickness");
  // Tracker EndCap disks layers 1-9
  tecLayerThickness = trackerMaterial.getParameter<std::vector<double> >("TECLayerThickness");
  // TOB outside wall (barrel)
  barrelCablesThickness = trackerMaterial.getParameter<std::vector<double> >("BarrelCablesThickness");
  // TEC outside wall (endcap)
  endcapCables1Thickness = trackerMaterial.getParameter<std::vector<double> >("EndcapCables1Thickness");
  endcapCables2Thickness = trackerMaterial.getParameter<std::vector<double> >("EndcapCables2Thickness");

  // Position of dead material layers (cables, services, etc.)
  // Beam pipe
  beamPipeRadius = trackerMaterial.getParameter<std::vector<double> >("BeamPipeRadius");
  beamPipeLength = trackerMaterial.getParameter<std::vector<double> >("BeamPipeLength");
  // Cables and Services at the end of PIXB1,2,3 ("disk")
  pxb1CablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("PXB1CablesInnerRadius");
  pxb2CablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("PXB2CablesInnerRadius");
  pxb3CablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("PXB3CablesInnerRadius");
  // Pixel Barrel Outside walls and cables
  pxbOutCables1InnerRadius = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables1InnerRadius");
  pxbOutCables1OuterRadius = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables1OuterRadius");
  pxbOutCables1ZPosition = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables1ZPosition");
  pxbOutCables2InnerRadius = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables2InnerRadius");
  pxbOutCables2OuterRadius = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables2OuterRadius");
  pxbOutCables2ZPosition = trackerMaterial.getParameter<std::vector<double> >("PXBOutCables2ZPosition");
  // Pixel Outside walls and cables (barrel and endcaps)
  pixelOutCablesRadius = trackerMaterial.getParameter<std::vector<double> >("PixelOutCablesRadius");
  pixelOutCablesLength = trackerMaterial.getParameter<std::vector<double> >("PixelOutCablesLength");
  pixelOutCablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("PixelOutCablesInnerRadius");
  pixelOutCablesOuterRadius = trackerMaterial.getParameter<std::vector<double> >("PixelOutCablesOuterRadius");
  pixelOutCablesZPosition = trackerMaterial.getParameter<std::vector<double> >("PixelOutCablesZPosition");
  // Tracker Inner Barrel Outside Cables and walls (endcap) 
  tibOutCables1InnerRadius = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables1InnerRadius");
  tibOutCables1OuterRadius = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables1OuterRadius");
  tibOutCables1ZPosition = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables1ZPosition");
  tibOutCables2InnerRadius = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables2InnerRadius");
  tibOutCables2OuterRadius = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables2OuterRadius");
  tibOutCables2ZPosition = trackerMaterial.getParameter<std::vector<double> >("TIBOutCables2ZPosition");
  // Tracker outer barrel Inside wall (barrel)
  tobInCablesRadius = trackerMaterial.getParameter<std::vector<double> >("TOBInCablesRadius");
  tobInCablesLength = trackerMaterial.getParameter<std::vector<double> >("TOBInCablesLength");
  // Tracker Inner Disks Outside Cables and walls
  tidOutCablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("TIDOutCablesInnerRadius");
  tidOutCablesZPosition = trackerMaterial.getParameter<std::vector<double> >("TIDOutCablesZPosition");
  // Tracker Outer Barrel Outside Cables and walls (barrel and endcaps)
  tobOutCablesInnerRadius = trackerMaterial.getParameter<std::vector<double> >("TOBOutCablesInnerRadius");
  tobOutCablesOuterRadius = trackerMaterial.getParameter<std::vector<double> >("TOBOutCablesOuterRadius");
  tobOutCablesZPosition = trackerMaterial.getParameter<std::vector<double> >("TOBOutCablesZPosition");
  tobOutCablesRadius = trackerMaterial.getParameter<std::vector<double> >("TOBOutCablesRadius");
  tobOutCablesLength = trackerMaterial.getParameter<std::vector<double> >("TOBOutCablesLength");
  // Tracker Endcaps Outside Cables and walls
  tecOutCables1InnerRadius = trackerMaterial.getParameter<std::vector<double> >("TECOutCables1InnerRadius");
  tecOutCables1OuterRadius = trackerMaterial.getParameter<std::vector<double> >("TECOutCables1OuterRadius");
  tecOutCables1ZPosition = trackerMaterial.getParameter<std::vector<double> >("TECOutCables1ZPosition");
  tecOutCables2InnerRadius = trackerMaterial.getParameter<std::vector<double> >("TECOutCables2InnerRadius");
  tecOutCables2OuterRadius = trackerMaterial.getParameter<std::vector<double> >("TECOutCables2OuterRadius");
  tecOutCables2ZPosition = trackerMaterial.getParameter<std::vector<double> >("TECOutCables2ZPosition");

  // Fudge factors for tracker layer material inhomogeneities
  fudgeLayer = trackerMaterial.getParameter<std::vector<unsigned int> >("FudgeLayer");
  fudgeMin = trackerMaterial.getParameter<std::vector<double> >("FudgeMin");
  fudgeMax = trackerMaterial.getParameter<std::vector<double> >("FudgeMax");
  fudgeFactor = trackerMaterial.getParameter<std::vector<double> >("FudgeFactor");

  // The previous std::vector must have the same size!
  if ( fudgeLayer.size() != fudgeMin.size() ||  
       fudgeLayer.size() != fudgeMax.size() ||  
       fudgeLayer.size() != fudgeFactor.size() ) {
    throw cms::Exception("FastSimulation/TrackerInteractionGeometry ") 
      << " WARNING with fudge factors !  You have " << fudgeLayer.size() 
      << " layers, but " 
      << fudgeMin.size() << " min values, "
      << fudgeMax.size() << " max values and "
      << fudgeFactor.size() << " fudge factor values!"
      << std::endl
      << "Please make enter the same number of inputs " 
      << "in FastSimulation/TrackerInteractionGeometry/data/TrackerMaterial.cfi"
      << std::endl;
  }

  // The Beam pipe
  _theMPBeamPipe = new MediumProperties(beamPipeThickness[version],0.0001);  
  // The pixel barrel layers
  _theMPPixelBarrel = new MediumProperties(pxbThickness[version],0.0001);  
    // Pixel Barrel services at the end of layers 1-3
  _theMPPixelOutside1 = new MediumProperties(pxb1CablesThickness[version],0.0001);  
  _theMPPixelOutside2 = new MediumProperties(pxb2CablesThickness[version],0.0001);  
  _theMPPixelOutside3 = new MediumProperties(pxb3CablesThickness[version],0.0001);  
  // Pixel Barrel outside cables
  _theMPPixelOutside4 = new MediumProperties(pxbOutCables1Thickness[version],0.0001);  
  _theMPPixelOutside  = new MediumProperties(pxbOutCables2Thickness[version],0.0001);  
  // The pixel endcap disks
  _theMPPixelEndcap = new MediumProperties(pxdThickness[version],0.0001);  
  // Pixel Endcap outside cables
  _theMPPixelOutside5 = new MediumProperties(pxdOutCables1Thickness[version],0.0001);  
  _theMPPixelOutside6 = new MediumProperties(pxdOutCables2Thickness[version],0.0001);  
  // The tracker inner barrel layers 1-4
  _theMPTIB1 = new MediumProperties(tibLayer1Thickness[version],0.0001);  
  _theMPTIB2 = new MediumProperties(tibLayer2Thickness[version],0.0001);  
  _theMPTIB3 = new MediumProperties(tibLayer3Thickness[version],0.0001);  
  _theMPTIB4 = new MediumProperties(tibLayer4Thickness[version],0.0001);  
  // TIB outside services (endcap)
  _theMPTIBEOutside1 = new MediumProperties(tibOutCables1Thickness[version],0.0001);  
  _theMPTIBEOutside2 = new MediumProperties(tibOutCables2Thickness[version],0.0001);  
  // The tracker inner disks 1-3
  _theMPInner1 = new MediumProperties(tidLayer1Thickness[version],0.0001);  
  _theMPInner2 = new MediumProperties(tidLayer2Thickness[version],0.0001);  
  _theMPInner3 = new MediumProperties(tidLayer3Thickness[version],0.0001);  
  // TID outside wall (endcap)
  _theMPTIDEOutside = new MediumProperties(tidOutsideThickness[version],0.0001);  
  // TOB inside wall (barrel)
  _theMPTOBBInside = new MediumProperties(tobInsideThickness[version],0.0001);  
  // The tracker outer barrel layers 1-6
  _theMPTOB1 = new MediumProperties(tobLayer1Thickness[version],0.0001);  
  _theMPTOB2 = new MediumProperties(tobLayer2Thickness[version],0.0001);  
  _theMPTOB3 = new MediumProperties(tobLayer3Thickness[version],0.0001);  
  _theMPTOB4 = new MediumProperties(tobLayer4Thickness[version],0.0001);  
  _theMPTOB5 = new MediumProperties(tobLayer5Thickness[version],0.0001);  
  _theMPTOB6 = new MediumProperties(tobLayer6Thickness[version],0.0001);  
  // TOB services (endcap)
  _theMPTOBEOutside = new MediumProperties(tobOutsideThickness[version],0.0001);  
  // The tracker endcap disks 1-9
  _theMPEndcap = new MediumProperties(tecLayerThickness[version],0.0001);  
  // TOB outside wall (barrel)
  _theMPBarrelOutside = new MediumProperties(barrelCablesThickness[version],0.0001);  
  // TEC outside wall (endcap)
  _theMPEndcapOutside = new MediumProperties(endcapCables1Thickness[version],0.0001);  
  _theMPEndcapOutside2 = new MediumProperties(endcapCables2Thickness[version],0.0001);  

  // Check that the Reco Tracker Geometry has been loaded
  if ( !theGeomSearchTracker ) 
    throw cms::Exception("FastSimulation/TrackerInteractionGeometry") 
      << "The pointer to the GeometricSearchTracker was not set"; 

  // The vector of Barrel Tracker Layers 
  std::vector< BarrelDetLayer*> barrelLayers = 
    theGeomSearchTracker->barrelLayers();

  // The vector of Forward Tracker Layers (positive z)
  std::vector< ForwardDetLayer*>  posForwardLayers = 
    theGeomSearchTracker->posForwardLayers();

  // Local pointers
  BoundCylinder* theCylinder;
  BoundDisk* theDisk;

  // Create the nest of cylinders
  const Surface::PositionType thePosition(0.,0.,0.);
  const Surface::RotationType theRotation(1.,0.,0.,0.,1.,0.,0.,0.,1.);
  // Beam Pipe
  //  const SimpleCylinderBounds  PIPE( 0.997,   1.003,  -300., 300.);
  const SimpleCylinderBounds  PIPE( beamPipeRadius[version]-0.003, beamPipeRadius[version]+0.003,  
                                   -beamPipeLength[version],       beamPipeLength[version]);

  // Take the active layer position from the Tracker Reco Geometry
  // Pixel barrel
  std::vector< BarrelDetLayer*>::const_iterator bl = barrelLayers.begin();
  double maxLength = (**bl).specificSurface().bounds().length()/2.+1.7;
  double maxRadius = (**bl).specificSurface().radius()+0.01;
  // First pixel barrel layer: r=4.41058, l=53.38
  const SimpleCylinderBounds  PIXB1( maxRadius-0.005, maxRadius+0.005, -maxLength, +maxLength);
  // "Cables" 
  const SimpleDiskBounds PIXBOut1(pxb1CablesInnerRadius[version],maxRadius+0.01,-0.5,0.5);
  const Surface::PositionType PPIXBOut1(0.0,0.0,maxLength);

  // Second pixel barrel layer: r=7.30732, l=53.38
  ++bl;
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+1.7, maxLength+0.000 );
  maxRadius = (**bl).specificSurface().radius();
  const SimpleCylinderBounds  PIXB2( maxRadius-0.005, maxRadius+0.005, -maxLength, +maxLength);

  // "Cables"
  const SimpleDiskBounds PIXBOut2(pxb2CablesInnerRadius[version],maxRadius+0.005,-0.5,0.5);
  const Surface::PositionType PPIXBOut2(0.0,0.0,maxLength);

  // More cables
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  const SimpleDiskBounds PIXBOut3(pxb3CablesInnerRadius[version],maxRadius,-0.5,0.5);
  const Surface::PositionType PPIXBOut3(0.0,0.0,maxLength);

  // Third pixel barrel layer: r=10.1726, l=53.38
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+1.7, maxLength+0.000 );
  const SimpleCylinderBounds  PIXB3( maxRadius-0.005, maxRadius+0.005, -maxLength, +maxLength);

  // Pixel Barrel Outside walls and cables
  const SimpleDiskBounds PIXBOut4( pxbOutCables1InnerRadius[version],pxbOutCables1OuterRadius[version],-0.5,0.5);
  const Surface::PositionType PPIXBOut4(0.0,0.0,pxbOutCables1ZPosition[version]);

  const SimpleDiskBounds PIXBOut(pxbOutCables2InnerRadius[version],pxbOutCables2OuterRadius[version],-0.5,0.5);
  const Surface::PositionType PPIXBOut(0.0,0.0,pxbOutCables2ZPosition[version]);

  const SimpleCylinderBounds  PIXBOut5( pixelOutCablesRadius[version]-0.1, pixelOutCablesRadius[version]+0.1, 
                                       -pixelOutCablesLength[version],     pixelOutCablesLength[version]);

  const SimpleDiskBounds PIXBOut6(pixelOutCablesInnerRadius[version],pixelOutCablesOuterRadius[version],-0.5,0.5);
  const Surface::PositionType PPIXBOut6(0.0,0.0,pixelOutCablesZPosition[version]);


  // Tracker Inner Barrel : thin detectors (300 microns)
  // First TIB layer: r=25.6786, l=130.04
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = (**bl).specificSurface().bounds().length()/2.;
  const SimpleCylinderBounds  TIB1( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Second TIB layer: r=34.0341, l=131.999
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2., maxLength+0.000 );
  const SimpleCylinderBounds  TIB2( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Third TIB layer: r=41.9599, l=131.628  !!!! Needs to be larger than TIB2
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2., maxLength+0.000 );
  const SimpleCylinderBounds  TIB3( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Fourth TIB layer: r=49.8924, l=132.78
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2., maxLength+0.000 );
  const SimpleCylinderBounds  TIB4( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);

  // Inner Barrel Cylinder & Ends : Cables and walls
  const SimpleDiskBounds TIBEOut(tibOutCables1InnerRadius[version],tibOutCables1OuterRadius[version],-0.05,0.05);
  const Surface::PositionType PTIBEOut(0.0,0.0,tibOutCables1ZPosition[version]);

  const SimpleDiskBounds TIBEOut2(tibOutCables2InnerRadius[version],tibOutCables2OuterRadius[version],-0.05,0.05);
  const Surface::PositionType PTIBEOut2(0.0,0.0,tibOutCables2ZPosition[version]);

  // Inner Tracker / Outer Barrel Wall
  const SimpleCylinderBounds  TOBCIn ( tobInCablesRadius[version]-0.5, tobInCablesRadius[version]+0.5,
                                      -tobInCablesLength[version],     tobInCablesLength[version]);

  // First TOB layer: r=60.7671, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = (**bl).specificSurface().bounds().length()/2.+0.0;
  const SimpleCylinderBounds  TOB1( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Second TOB layer: r=69.3966, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+0.0, maxLength+0.000 );
  const SimpleCylinderBounds  TOB2( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Third TOB layer: r=78.0686, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+0.0, maxLength+0.000 );
  const SimpleCylinderBounds  TOB3( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Fourth TOB layer: r=86.8618, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+0.0, maxLength+0.000 );
  const SimpleCylinderBounds  TOB4( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Fifth TOB layer: r=96.5557, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+0.0, maxLength+0.000 );
  const SimpleCylinderBounds  TOB5( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);
  // Sixth TOB layer: r=108.05, l=216.576
  ++bl;
  maxRadius = (**bl).specificSurface().radius();
  maxLength = std::max( (**bl).specificSurface().bounds().length()/2.+0.0, maxLength+0.000 );
  const SimpleCylinderBounds  TOB6( maxRadius-0.0150, maxRadius+0.0150, -maxLength, +maxLength);

  const SimpleDiskBounds TOBEOut(tobOutCablesInnerRadius[version],tobOutCablesOuterRadius[version],-0.5,0.5);
  const Surface::PositionType PTOBEOut(0.0,0.0,tobOutCablesZPosition[version]);

  const Surface::RotationType theRotation2(1.,0.,0.,0.,1.,0.,0.,0.,1.);

  // Outside : Barrel
  const SimpleCylinderBounds  TBOut ( tobOutCablesRadius[version]-0.5, tobOutCablesRadius[version]+0.5,
                                     -tobOutCablesLength[version],     tobOutCablesLength[version]);

  // And now the disks...
  std::vector< ForwardDetLayer*>::const_iterator fl = posForwardLayers.begin();

  // Pixel disks 
  // First Pixel disk: Z pos 35.5 radii 5.42078, 16.0756
  double innerRadius = (**fl).specificSurface().innerRadius()-1.0;
  double outerRadius = (**fl).specificSurface().outerRadius()+2.0;
  const SimpleDiskBounds PIXD1(innerRadius, outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PPIXD1(0.0,0.0,(**fl).surface().position().z()); 
  // Second Pixel disk: Z pos 48.5 radii 5.42078, 16.0756
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-1.0;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds PIXD2(innerRadius, outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PPIXD2(0.0,0.0,(**fl).surface().position().z()); 

  // Tracker Inner disks (add 3 cm for the outer radius to simulate cables, 
  // and remove 1cm to inner radius to allow for some extrapolation margin)
  // First TID : Z pos 78.445 radii 23.14, 50.4337
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-0.5;
  outerRadius = (**fl).specificSurface().outerRadius()+3.5;
  const SimpleDiskBounds TID1(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTID1(0.,0.,(**fl).surface().position().z()); 
  // Second TID : Z pos 90.445 radii 23.14, 50.4337
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-0.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+3.5, outerRadius+0.000);
  const SimpleDiskBounds TID2(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTID2(0.,0.,(**fl).surface().position().z()); 
  // Third TID : Z pos 105.445 radii 23.14, 50.4337
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-0.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+3.5, outerRadius+0.000);
  const SimpleDiskBounds TID3(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTID3(0.,0.,(**fl).surface().position().z()); 

  // TID Wall and cables
  const SimpleDiskBounds TIDEOut(tidOutCablesInnerRadius[version],outerRadius+1.0,-0.5,0.5);
  const Surface::PositionType PTIDEOut(0.0,0.0,tidOutCablesZPosition[version]);


  // Tracker Endcaps : Add 11 cm to outer radius to correct for a bug, remove
  // 5cm to the inner radius (TEC7,8,9) to correct for a simular bug, and
  // remove other 2cm to inner radius to allow for some extrapolation margin
  // First TEC: Z pos 131.892 radii 23.3749, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-1.5;
  outerRadius = (**fl).specificSurface().outerRadius()+2.0;
  const SimpleDiskBounds TEC1(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC1(0.,0,(**fl).surface().position().z()); 
  // Second TEC: Z pos 145.892 radii 23.3749, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-1.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC2(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC2(0.,0.,(**fl).surface().position().z());
  // Third TEC: Z pos 159.892 radii 23.3749, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-1.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC3(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC3(0.,0.,(**fl).surface().position().z());
  // Fourth TEC: Z pos 173.892 radii 32.1263, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-2.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC4(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC4(0.,0.,(**fl).surface().position().z());
  // Fifth TEC: Z pos 187.892 radii 32.1263, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-2.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC5(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC5(0.,0.,(**fl).surface().position().z());
  // Sixth TEC: Z pos 205.392 radii 32.1263, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-2.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC6(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC6(0.,0.,(**fl).surface().position().z());
  // Seventh TEC: Z pos 224.121 radii 44.7432, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-9.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC7(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC7(0.,0.,(**fl).surface().position().z());
  // Eighth TEC: Z pos 244.621 radii 44.7432, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-9.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC8(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC8(0.,0.,(**fl).surface().position().z());
  // Nineth TEC: Z pos 266.121 radii 56.1781, 99.1967
  ++fl;
  innerRadius = (**fl).specificSurface().innerRadius()-20.5;
  outerRadius = std::max( (**fl).specificSurface().outerRadius()+2.0, outerRadius+0.000 );
  const SimpleDiskBounds TEC9(innerRadius,outerRadius,-0.0150,+0.0150);
  const Surface::PositionType PTEC9(0.,0.,(**fl).surface().position().z());

  // Outside : Endcap
  const SimpleDiskBounds TEOut(tecOutCables1InnerRadius[version],tecOutCables1OuterRadius[version],-0.5,0.5);
  const Surface::PositionType PTEOut(0.0,0.0,tecOutCables1ZPosition[version]);

  const SimpleDiskBounds TEOut2(tecOutCables2InnerRadius[version],tecOutCables2OuterRadius[version],-0.5,0.5);
  const Surface::PositionType PTEOut2(0.0,0.0,tecOutCables2ZPosition[version]);

  // The ordering of disks and cylinders is essential here
  // (from inside to outside)
  // Do not change it thoughtlessly.


  // Beam Pipe

  unsigned layerNr = 100;
  theCylinder = new BoundCylinder(thePosition,theRotation,PIPE);
  theCylinder->setMediumProperties(_theMPBeamPipe);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;
  
  // Pixels 

  layerNr = TrackerInteractionGeometry::PXB+1;
  theCylinder = new BoundCylinder(thePosition,theRotation,PIXB1);
  theCylinder->setMediumProperties(_theMPPixelBarrel);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 101;
  theDisk = new BoundDisk(PPIXBOut1,theRotation2,PIXBOut1);
  theDisk->setMediumProperties(_theMPPixelOutside1);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::PXB+2;
  theCylinder = new BoundCylinder(thePosition,theRotation,PIXB2);
  theCylinder->setMediumProperties(_theMPPixelBarrel);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 102;
  theDisk = new BoundDisk(PPIXBOut2,theRotation2,PIXBOut2);
  theDisk->setMediumProperties(_theMPPixelOutside2);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 103;
  theDisk = new BoundDisk(PPIXBOut3,theRotation2,PIXBOut3);
  theDisk->setMediumProperties(_theMPPixelOutside3);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::PXB+3;
  theCylinder = new BoundCylinder(thePosition,theRotation,PIXB3);
  theCylinder->setMediumProperties(_theMPPixelBarrel);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 104;
  theDisk = new BoundDisk(PPIXBOut4,theRotation2,PIXBOut4);
  theDisk->setMediumProperties(_theMPPixelOutside4);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 105;
  theDisk = new BoundDisk(PPIXBOut,theRotation2,PIXBOut);
  theDisk->setMediumProperties(_theMPPixelOutside);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::PXD+1;
  theDisk = new BoundDisk(PPIXD1,theRotation2,PIXD1);
  theDisk->setMediumProperties(_theMPPixelEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::PXD+2;
  theDisk = new BoundDisk(PPIXD2,theRotation2,PIXD2);
  theDisk->setMediumProperties(_theMPPixelEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 106;
  theCylinder = new BoundCylinder(thePosition,theRotation,PIXBOut5);
  theCylinder->setMediumProperties(_theMPPixelOutside5);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 107;
  theDisk = new BoundDisk(PPIXBOut6,theRotation2,PIXBOut6);
  theDisk->setMediumProperties(_theMPPixelOutside6);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  // Inner Barrel 

  layerNr = TrackerInteractionGeometry::TIB+1;
  theCylinder = new BoundCylinder(thePosition,theRotation,TIB1);
  theCylinder->setMediumProperties(_theMPTIB1);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TIB+2;
  theCylinder = new BoundCylinder(thePosition,theRotation,TIB2);
  theCylinder->setMediumProperties(_theMPTIB2);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TIB+3;
  theCylinder = new BoundCylinder(thePosition,theRotation,TIB3);
  theCylinder->setMediumProperties(_theMPTIB3);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TIB+4;
  theCylinder = new BoundCylinder(thePosition,theRotation,TIB4);
  theCylinder->setMediumProperties(_theMPTIB4);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 108;
  theDisk = new BoundDisk(PTIBEOut,theRotation2,TIBEOut);
  theDisk->setMediumProperties(_theMPTIBEOutside1);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 109;
  theDisk = new BoundDisk(PTIBEOut2,theRotation2,TIBEOut2);
  theDisk->setMediumProperties(_theMPTIBEOutside2);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;
  
  // Inner Endcaps

  layerNr = TrackerInteractionGeometry::TID+1;
  theDisk = new BoundDisk(PTID1,theRotation2,TID1);
  theDisk->setMediumProperties(_theMPInner1);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TID+2;
  theDisk = new BoundDisk(PTID2,theRotation2,TID2);
  theDisk->setMediumProperties(_theMPInner2);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));

  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TID+3;
  theDisk = new BoundDisk(PTID3,theRotation2,TID3);
  theDisk->setMediumProperties(_theMPInner3);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,12,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 110;
  theDisk = new BoundDisk(PTIDEOut,theRotation2,TIDEOut);
  theDisk->setMediumProperties(_theMPTIDEOutside);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;


  // Outer Barrel 

  layerNr = 111;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOBCIn);
  theCylinder->setMediumProperties(_theMPTOBBInside);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+1;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB1);
  theCylinder->setMediumProperties(_theMPTOB1);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+2;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB2);
  theCylinder->setMediumProperties(_theMPTOB2);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+3;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB3);
  theCylinder->setMediumProperties(_theMPTOB3);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+4;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB4);
  theCylinder->setMediumProperties(_theMPTOB4);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+5;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB5);
  theCylinder->setMediumProperties(_theMPTOB5);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = TrackerInteractionGeometry::TOB+6;
  theCylinder = new BoundCylinder(thePosition,theRotation,TOB6);
  theCylinder->setMediumProperties(_theMPTOB6);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 112;
  theDisk = new BoundDisk(PTOBEOut,theRotation2,TOBEOut);
  theDisk->setMediumProperties(_theMPTOBEOutside);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  // Outer Endcaps
 
  layerNr = TrackerInteractionGeometry::TEC+1;
  theDisk = new BoundDisk(PTEC1,theRotation2,TEC1);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+2;
  theDisk = new BoundDisk(PTEC2,theRotation2,TEC2);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+3;
  theDisk = new BoundDisk(PTEC3,theRotation2,TEC3);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+4;
  theDisk = new BoundDisk(PTEC4,theRotation2,TEC4);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+5;
  theDisk = new BoundDisk(PTEC5,theRotation2,TEC5);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+6;
  theDisk = new BoundDisk(PTEC6,theRotation2,TEC6);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+7;
  theDisk = new BoundDisk(PTEC7,theRotation2,TEC7);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+8;
  theDisk = new BoundDisk(PTEC8,theRotation2,TEC8);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = TrackerInteractionGeometry::TEC+9;
  theDisk = new BoundDisk(PTEC9,theRotation2,TEC9);
  theDisk->setMediumProperties(_theMPEndcap);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;


  // Tracker Outside

  layerNr = 113;
  theCylinder = new BoundCylinder(thePosition,theRotation,TBOut);
  theCylinder->setMediumProperties(_theMPBarrelOutside);
  if ( theCylinder->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theCylinder,false,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theCylinder;

  layerNr = 114;
  theDisk = new BoundDisk(PTEOut,theRotation2,TEOut);
  theDisk->setMediumProperties(_theMPEndcapOutside);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  layerNr = 115;
  theDisk = new BoundDisk(PTEOut2,theRotation2,TEOut2);
  theDisk->setMediumProperties(_theMPEndcapOutside2);
  if ( theDisk->mediumProperties()->radLen() > 0. ) 
    _theCylinders.push_back(TrackerLayer(theDisk,true,layerNr,
                                         minDim(layerNr),maxDim(layerNr),
                                         fudgeFactors(layerNr)));
  else
    delete theDisk;

  // Check overall compatibility of cylinder dimensions
  // (must be nested cylinders)
  // Throw an exception if the test fails
  double zin, rin;
  double zout, rout;
  unsigned nCyl=0;
  std::list<TrackerLayer>::const_iterator cyliterOut=cylinderBegin();
  // Inner cylinder dimensions
  if ( cyliterOut->forward() ) {
    zin = cyliterOut->disk()->position().z();
    rin = cyliterOut->disk()->outerRadius();
  } else {
    zin = cyliterOut->cylinder()->bounds().length()/2.;
    rin = cyliterOut->cylinder()->bounds().width()/2.;
  }
  // Go to the next cylinder
  ++cyliterOut;
  // And loop over all cylinders
  while ( cyliterOut != cylinderEnd() ) {
    // Outer cylinder dimensions
    if ( cyliterOut->forward() ) {
      zout = cyliterOut->disk()->position().z();
      rout = cyliterOut->disk()->outerRadius();
    } else {
      zout = cyliterOut->cylinder()->bounds().length()/2.;
      rout = cyliterOut->cylinder()->bounds().width()/2.;
    }

    nCyl++;
    if ( zout < zin || rout < rin ) { 
      throw cms::Exception("FastSimulation/TrackerInteractionGeometry ") 
        << " WARNING with cylinder number " << nCyl 
        << " (Active Layer Number = " <<  cyliterOut->layerNumber() 
        << " Forward ? " <<  cyliterOut->forward() << " ) "
        << " has dimensions smaller than previous cylinder : " << std::endl
        << " zout/zin = " << zout << " " << zin << std::endl
        << " rout/rin = " << rout << " " << rin << std::endl;
    } else {
      /*
      std::cout << " Cylinder number " << nCyl 
                << " (Active Layer Number = " <<  cyliterOut->layerNumber() 
                << " Forward ? " <<  cyliterOut->forward() << " ) "
                << " has dimensions of : " 
                << " zout = " << zout << "; " 
                << " rout = " << rout << std::endl;
      */
    }
    // Go to the next cylinder
    cyliterOut++;
    // Inner cylinder becomes outer cylinder
    zin = zout;
    rin = rout;
    // End test
  } 
    
}

std::vector<double>
TrackerInteractionGeometry::minDim(unsigned layerNr) { 
  std::vector<double> min;
  for ( unsigned iLayer=0; iLayer<fudgeFactor.size(); ++iLayer ) {   
    if ( layerNr != fudgeLayer[iLayer] ) continue;
    min.push_back(fudgeMin[iLayer]);
  }
  return min;
}

std::vector<double>
TrackerInteractionGeometry::maxDim(unsigned layerNr) { 
  std::vector<double> max;
  for ( unsigned iLayer=0; iLayer<fudgeFactor.size(); ++iLayer ) {   
    if ( layerNr != fudgeLayer[iLayer] ) continue;
    max.push_back(fudgeMax[iLayer]);
  }
  return max;
}

std::vector<double>
TrackerInteractionGeometry::fudgeFactors(unsigned layerNr) { 
  std::vector<double> fudge;
  for ( unsigned iLayer=0; iLayer<fudgeFactor.size(); ++iLayer ) {   
    if ( layerNr != fudgeLayer[iLayer] ) continue;
    fudge.push_back(fudgeFactor[iLayer]);
  }
  return fudge;
}

TrackerInteractionGeometry::~TrackerInteractionGeometry()
{
  _theCylinders.clear();
  //  _theRings.clear();

  // The Beam pipe
  delete _theMPBeamPipe;
  // The pixel barrel layers
  delete _theMPPixelBarrel;
  // The pixel endcap disks
  delete _theMPPixelEndcap;
  // The various cables thicnesses for each layer / disks
  delete _theMPPixelOutside1;
  delete _theMPPixelOutside2;
  delete _theMPPixelOutside3;
  delete _theMPPixelOutside4;
  delete _theMPPixelOutside;
  delete _theMPPixelOutside5;
  delete _theMPPixelOutside6;
  // The tracker inner barrel layers
  delete _theMPTIB1;
  delete _theMPTIB2;
  delete _theMPTIB3;
  delete _theMPTIB4;
  // The tracker outer barrel layers
  delete _theMPTOB1;
  delete _theMPTOB2;
  delete _theMPTOB3;
  delete _theMPTOB4;
  delete _theMPTOB5;
  delete _theMPTOB6;
  // The tracker inner disks
  delete _theMPInner1;
  delete _theMPInner2;
  delete _theMPInner3;
  // The tracker endcap disks
  delete _theMPEndcap;
  // Various cable thicknesses 
  delete _theMPTOBBInside;
  delete _theMPTIBEOutside1;
  delete _theMPTIBEOutside2;
  delete _theMPTIDEOutside;
  delete _theMPTOBEOutside;
  delete _theMPBarrelOutside;
  delete _theMPEndcapOutside;
  delete _theMPEndcapOutside2;
}