/data/doxygen/doxygen-1.7.3/gen/CMSSW_4_2_8/src/PhysicsTools/PatExamples/plugins/PatBJetTrackAnalyzer.cc

Go to the documentation of this file.

#include <algorithm>
#include <iostream>
#include <cmath>
#include <vector>
#include <string>

#include <TH1.h>
#include <TProfile.h>

#include <Math/VectorUtil.h>

#include "FWCore/Framework/interface/Frameworkfwd.h"
#include "FWCore/Framework/interface/Event.h"
#include "FWCore/Framework/interface/EventSetup.h"
#include "FWCore/Framework/interface/EDAnalyzer.h"
#include "FWCore/Utilities/interface/InputTag.h"
#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "FWCore/ServiceRegistry/interface/Service.h"

#include "CommonTools/UtilAlgos/interface/TFileService.h"

#include "DataFormats/BeamSpot/interface/BeamSpot.h"
#include "DataFormats/VertexReco/interface/Vertex.h"
#include "DataFormats/VertexReco/interface/VertexFwd.h"
#include "DataFormats/TrackReco/interface/Track.h"
#include "DataFormats/TrackReco/interface/TrackFwd.h"
#include "DataFormats/PatCandidates/interface/Jet.h"
#include "DataFormats/GeometryCommonDetAlgo/interface/Measurement1D.h"

class PatBJetTrackAnalyzer : public edm::EDAnalyzer  {
    public: 
        PatBJetTrackAnalyzer(const edm::ParameterSet &params);
        ~PatBJetTrackAnalyzer();

        // virtual methods called from base class EDAnalyzer
        virtual void beginJob();
        virtual void analyze(const edm::Event &event, const edm::EventSetup &es);

    private:
        // configuration parameters
        edm::InputTag jets_;
        edm::InputTag tracks_;
        edm::InputTag beamSpot_;
        edm::InputTag primaryVertices_;

        double jetPtCut_;               // minimum (uncorrected) jet energy
        double jetEtaCut_;              // maximum |eta| for jet
        double maxDeltaR_;              // angle between jet and tracks

        double minPt_;                  // track pt quality cut
        unsigned int minPixelHits_;     // minimum number of pixel hits
        unsigned int minTotalHits_;     // minimum number of total hits

        unsigned int nThTrack_;         // n-th hightest track to choose

        // jet flavour constants

        enum Flavour {
                ALL_JETS = 0,
                UDSG_JETS,
                C_JETS,
                B_JETS,
                NONID_JETS,
                N_JET_TYPES
        };

        TH1 *flavours_;

        // one group of plots per jet flavour;
        struct Plots {
                TH1 *allIP, *allIPErr, *allIPSig;
                TH1 *trackIP, *trackIPErr, *trackIPSig;
                TH1 *negativeIP, *negativeIPErr, *negativeIPSig;
                TH1 *nTracks, *allDeltaR;
        } plots_[N_JET_TYPES];
};

PatBJetTrackAnalyzer::PatBJetTrackAnalyzer(const edm::ParameterSet &params) :
        jets_(params.getParameter<edm::InputTag>("jets")),
        tracks_(params.getParameter<edm::InputTag>("tracks")),
        beamSpot_(params.getParameter<edm::InputTag>("beamSpot")),
        primaryVertices_(params.getParameter<edm::InputTag>("primaryVertices")),
        jetPtCut_(params.getParameter<double>("jetPtCut")),
        jetEtaCut_(params.getParameter<double>("jetEtaCut")),
        maxDeltaR_(params.getParameter<double>("maxDeltaR")),
        minPt_(params.getParameter<double>("minPt")),
        minPixelHits_(params.getParameter<unsigned int>("minPixelHits")),
        minTotalHits_(params.getParameter<unsigned int>("minTotalHits")),
        nThTrack_(params.getParameter<unsigned int>("nThTrack"))
{
}

PatBJetTrackAnalyzer::~PatBJetTrackAnalyzer()
{
}

void PatBJetTrackAnalyzer::beginJob()
{
        // retrieve handle to auxiliary service
        //  used for storing histograms into ROOT file
        edm::Service<TFileService> fs;

        flavours_ = fs->make<TH1F>("flavours", "jet flavours", 5, 0, 5);

        // book histograms for all jet flavours
        for(unsigned int i = 0; i < N_JET_TYPES; i++) {
                Plots &plots = plots_[i];
                const char *flavour, *name;

                switch((Flavour)i) {
                    case ALL_JETS:
                        flavour = "all jets";
                        name = "all";
                        break;
                    case UDSG_JETS:
                        flavour = "light flavour jets";
                        name = "udsg";
                        break;
                    case C_JETS:
                        flavour = "charm jets";
                        name = "c";
                        break;
                    case B_JETS:
                        flavour = "bottom jets";
                        name = "b";
                        break;
                    default:
                        flavour = "unidentified jets";
                        name = "ni";
                        break;
                }

                plots.allIP = fs->make<TH1F>(Form("allIP_%s", name),
                                             Form("signed IP for all tracks in %s", flavour),
                                             100, -0.1, 0.2);
                plots.allIPErr = fs->make<TH1F>(Form("allIPErr_%s", name),
                                                Form("error of signed IP for all tracks in %s", flavour),
                                                100, 0, 0.05);
                plots.allIPSig = fs->make<TH1F>(Form("allIPSig_%s", name),
                                                Form("signed IP significance for all tracks in %s", flavour),
                                                100, -10, 20);

                plots.trackIP = fs->make<TH1F>(Form("trackIP_%s", name),
                                               Form("signed IP for selected positive track in %s", flavour),
                                               100, -0.1, 0.2);
                plots.trackIPErr = fs->make<TH1F>(Form("trackIPErr_%s", name),
                                                  Form("error of signed IP for selected positive track in %s", flavour),
                                                  100, 0, 0.05);
                plots.trackIPSig = fs->make<TH1F>(Form("trackIPSig_%s", name),
                                                  Form("signed IP significance for selected positive track in %s", flavour),
                                                  100, -10, 20);

                plots.negativeIP = fs->make<TH1F>(Form("negativeIP_%s", name),
                                                  Form("signed IP for selected negative track in %s", flavour),
                                                  100, -0.2, 0.1);
                plots.negativeIPErr = fs->make<TH1F>(Form("negativeIPErr_%s", name),
                                                     Form("error of signed IP for selected negative track in %s", flavour),
                                                     100, 0, 0.05);
                plots.negativeIPSig = fs->make<TH1F>(Form("negativeIPSig_%s", name),
                                                     Form("signed IP significance for selected negative track in %s", flavour),
                                                     100, -20, 10);

                plots.nTracks = fs->make<TH1F>(Form("nTracks_%s", name),
                                               Form("number of usable tracks in %s", flavour),
                                               30, 0, 30);
                plots.allDeltaR = fs->make<TH1F>(Form("allDeltaR_%s", name),
                                                 Form("\\DeltaR between track and %s", flavour),
                                                 100, 0, 1);
        }
}

// helper function to sort the tracks by impact parameter significance

static bool significanceHigher(const Measurement1D &meas1,
                               const Measurement1D &meas2)
{ return meas1.significance() > meas2.significance(); }

void PatBJetTrackAnalyzer::analyze(const edm::Event &event, const edm::EventSetup &es)
{  
        // handle to the primary vertex collection
        edm::Handle<reco::VertexCollection> pvHandle;
        event.getByLabel(primaryVertices_, pvHandle);

        // handle to the tracks collection
        edm::Handle<reco::TrackCollection> tracksHandle;
        event.getByLabel(tracks_, tracksHandle);

        // handle to the jets collection
        edm::Handle<pat::JetCollection> jetsHandle;
        event.getByLabel(jets_, jetsHandle);

        // handle to the beam spot
        edm::Handle<reco::BeamSpot> beamSpot;
        event.getByLabel(beamSpot_, beamSpot);

        // rare case of no reconstructed primary vertex
        if (pvHandle->empty())
                return;

        // extract the position of the (most probable) reconstructed vertex
        math::XYZPoint pv = (*pvHandle)[0].position();

        // now go through all jets
        for(pat::JetCollection::const_iterator jet = jetsHandle->begin();
            jet != jetsHandle->end(); ++jet) {

                // only look at jets that pass the pt and eta cut
                if (jet->pt() < jetPtCut_ ||
                    std::abs(jet->eta()) > jetEtaCut_)
                        continue;

                Flavour flavour;
                // find out the jet flavour (differs between quark and anti-quark)
                switch(std::abs(jet->partonFlavour())) {
                    case 1:
                    case 2:
                    case 3:
                    case 21:
                        flavour = UDSG_JETS;
                        break;
                    case 4:
                        flavour = C_JETS;
                        break;
                    case 5:
                        flavour = B_JETS;
                        break;
                    default:
                        flavour = NONID_JETS;
                }
        
                // simply count the number of accepted jets
                flavours_->Fill(ALL_JETS);
                flavours_->Fill(flavour);

                // this vector will contain IP value / error pairs
                std::vector<Measurement1D> ipValErr;

                // Note: PAT is also able to store associated tracks
                //       within the jet object, so we don't have to do the
                //       matching ourselves
                // (see ->associatedTracks() method)
                // However, using this we can't play with the DeltaR cone
                // withour rerunning the PAT producer

                // now loop through all tracks
                for(reco::TrackCollection::const_iterator track = tracksHandle->begin();
                    track != tracksHandle->end(); ++track) {

                        // check the quality criteria
                        if (track->pt() < minPt_ ||
                            track->hitPattern().numberOfValidHits() < (int)minTotalHits_ ||
                            track->hitPattern().numberOfValidPixelHits() < (int)minPixelHits_)
                                continue;

                        // check the Delta R between jet axis and track
                        // (Delta_R^2 = Delta_Eta^2 + Delta_Phi^2)
                        double deltaR = ROOT::Math::VectorUtil::DeltaR(
                                        jet->momentum(), track->momentum());

                        plots_[ALL_JETS].allDeltaR->Fill(deltaR);
                        plots_[flavour].allDeltaR->Fill(deltaR);

                        // only look at tracks in jet cone
                        if (deltaR > maxDeltaR_)
                                continue;

                        // What follows here is an approximation!
                        //
                        // The dxy() method of the tracks does a linear
                        // extrapolation from the track reference position
                        // given as the closest point to the beam spot
                        // with respect to the given vertex.
                        // Since we are using primary vertices, this
                        // approximation works well
                        //
                        // In order to get better results, the
                        // "TransientTrack" and specialised methods have
                        // to be used.
                        // Or look at the "impactParameterTagInfos",
                        // which contains the precomputed information
                        // from the official b-tagging algorithms
                        //
                        // see ->tagInfoTrackIP() method

                        double ipError = track->dxyError();
                        double ipValue = std::abs(track->dxy(pv));

                        // in order to compute the sign, we check if
                        // the point of closest approach to the vertex
                        // is in front or behind the vertex.
                        // Again, we a linear approximation
                        // 
                        // dot product between reference point and jet axis

                        math::XYZVector closestPoint = track->referencePoint() - beamSpot->position();
                        // only interested in transverse component, z -> 0
                        closestPoint.SetZ(0.);
                        double sign = closestPoint.Dot(jet->momentum());

                        if (sign < 0)
                                ipValue = -ipValue;

                        ipValErr.push_back(Measurement1D(ipValue, ipError));
                }

                // now order all tracks by significance (highest first)
                std::sort(ipValErr.begin(), ipValErr.end(), significanceHigher);

                plots_[ALL_JETS].nTracks->Fill(ipValErr.size());
                plots_[flavour].nTracks->Fill(ipValErr.size());

                // plot all tracks

                for(std::vector<Measurement1D>::const_iterator iter = ipValErr.begin();
                    iter != ipValErr.end(); ++iter) {
                        plots_[ALL_JETS].allIP->Fill(iter->value());
                        plots_[flavour].allIP->Fill(iter->value());

                        plots_[ALL_JETS].allIPErr->Fill(iter->error());
                        plots_[flavour].allIPErr->Fill(iter->error());

                        // significance (is really just value / error)
                        plots_[ALL_JETS].allIPSig->Fill(iter->significance());
                        plots_[flavour].allIPSig->Fill(iter->significance());
                }

                // check if we have enough tracks to fulfill the
                // n-th track requirement
                if (ipValErr.size() < nThTrack_)
                        continue;

                // pick the n-th highest track
                const Measurement1D *trk = &ipValErr[nThTrack_ - 1];

                plots_[ALL_JETS].trackIP->Fill(trk->value());
                plots_[flavour].trackIP->Fill(trk->value());

                plots_[ALL_JETS].trackIPErr->Fill(trk->error());
                plots_[flavour].trackIPErr->Fill(trk->error());

                plots_[ALL_JETS].trackIPSig->Fill(trk->significance());
                plots_[flavour].trackIPSig->Fill(trk->significance());

                // here we define a "negative tagger", i.e. we take
                // the track with the n-lowest signed IP
                // (i.e. preferrably select tracks that appear to become
                //  from "behind" the primary vertex, supposedly mismeasured
                //  tracks really coming from the primary vertex, and
                //  the contamination of displaced tracks should be small)
                trk = &ipValErr[ipValErr.size() - nThTrack_];

                plots_[ALL_JETS].negativeIP->Fill(trk->value());
                plots_[flavour].negativeIP->Fill(trk->value());

                plots_[ALL_JETS].negativeIPErr->Fill(trk->error());
                plots_[flavour].negativeIPErr->Fill(trk->error());

                plots_[ALL_JETS].negativeIPSig->Fill(trk->significance());
                plots_[flavour].negativeIPSig->Fill(trk->significance());
        }
}
        
#include "FWCore/Framework/interface/MakerMacros.h"

DEFINE_FWK_MODULE(PatBJetTrackAnalyzer);