/data/refman/pasoursint/CMSSW_4_1_8_patch9/src/Geometry/EcalCommonData/src/DDEcalPreshowerAlgo.cc

Go to the documentation of this file.

#include "Geometry/EcalCommonData/interface/DDEcalPreshowerAlgo.h"

#include <cmath>
#include <algorithm>

#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "DetectorDescription/Base/interface/DDTypes.h"
#include "DetectorDescription/Core/interface/DDLogicalPart.h"
#include "DetectorDescription/Core/interface/DDSolid.h"
#include "CLHEP/Units/GlobalSystemOfUnits.h"

DDEcalPreshowerAlgo::DDEcalPreshowerAlgo() : DDAlgorithm() {
  LogDebug("EcalGeom") << "DDEcalPreshowerAlgo info: Creating an instance" ;

}

void DDEcalPreshowerAlgo::initialize(const DDNumericArguments & nArgs,
                                     const DDVectorArguments & vArgs,
                                     const DDMapArguments & mArgs,
                                     const DDStringArguments & sArgs,
                                     const DDStringVectorArguments & vsArgs)
{

  LogDebug("EcalGeom") << "DDEcalPreshowerAlgo info: Initialize" ;
 
  asym_ladd_ = vArgs["ASYMETRIC_LADDER"];
  types_l5_ = vsArgs["TYPES_OF_LADD_L5"];
  types_l4_ = vsArgs["TYPES_OF_LADD_L4"];
  ladd_l5_map_ = vArgs["LADD_L5_MAP"];
  ladd_l4_map_ = vArgs["LADD_L4_MAP"];
  noLaddInCol_ = vArgs["NUMB_OF_LADD_IN_COL"];
  startOfFirstLadd_ = vArgs["START_OF_1ST_LADD"];
  typeOfLaddRow0 = vsArgs["TYPE_OF_LADD_1"];
  typeOfLaddRow1 = vsArgs["TYPE_OF_LADD_2"];
  typeOfLaddRow2 = vsArgs["TYPE_OF_LADD_3"];
  typeOfLaddRow3 = vsArgs["TYPE_OF_LADD_4"];
  thickLayers_ = vArgs["Layers"];
  thickness_ = double(nArgs["PRESH_Z_TOTAL"]);
  materials_ = vsArgs["LayMat"];
  layName_ = vsArgs["LayName"];
  rmaxVec = vArgs["R_MAX"]; // inner radii
  rminVec = vArgs["R_MIN"]; // outer radii
  waf_intra_col_sep = double(nArgs["waf_intra_col_sep"]);
  waf_inter_col_sep = double(nArgs["waf_inter_col_sep"]);
  waf_active = double(nArgs["waf_active"]);
  wedge_length = double(nArgs["wedge_length"]);
  wedge_offset = double(nArgs["wedge_offset"]);
  zwedge_ceramic_diff = double(nArgs["zwedge_ceramic_diff"]);
  ywedge_ceramic_diff = double(nArgs["ywedge_ceramic_diff"]);
  ceramic_length = double(nArgs["ceramic_length"]);
  wedge_angle = double(nArgs["wedge_angle"]);
  wedge_back_thick = double(nArgs["wedge_back_thick"]);
  ladder_thick = double(nArgs["ladder_thick"]);
  ladder_width = double(nArgs["ladder_width"]);
  micromodule_length = double(nArgs["micromodule_length"]);
  box_thick = double(nArgs["box_thick"]);
  abs1stx = vArgs["1ST_ABSX"];
  abs1sty = vArgs["1ST_ABSY"];
  abs2ndx = vArgs["2ND_ABSX"];
  abs2ndy = vArgs["2ND_ABSY"];
  ladPfx_ = vsArgs["LadPrefix"];
  LaddMaterial_ =  sArgs["LadderMaterial"];
  LdrFrnt_Length = double(nArgs["LdrFrnt_Length"]);
  LdrFrnt_Offset = double(nArgs["LdrFrnt_Offset"]);
  LdrBck_Length = double(nArgs["LdrBck_Length"]);
  LdrBck_Offset = double(nArgs["LdrBck_Offset"]);
  dee_separation = double(nArgs["dee_sep"]);
  In_rad_Abs_Al = double(nArgs["R_MIN_Abs_Al"]);
  In_rad_Abs_Pb = double(nArgs["R_MIN_Abs_Pb"]);
  rMax_Abs_Al_ = double(nArgs["R_MAX_Abs_Al"]);
  absAlX_X_ = double(nArgs["AbsAlX_X"]);
  absAlX_Y_ = double(nArgs["AbsAlX_Y"]);
  absAlX_subtr1_Xshift_ = double(nArgs["AbsAlX_subtr1_Xshift"]);
  absAlX_subtr1_Yshift_ = double(nArgs["AbsAlX_subtr1_Yshift"]); 
  absAlY_X_ = double(nArgs["AbsAlY_X"]);
  absAlY_Y_ = double(nArgs["AbsAlY_Y"]);
  absAlY_subtr1_Xshift_ = double(nArgs["AbsAlY_subtr1_Xshift"]);
  absAlY_subtr1_Yshift_ = double(nArgs["AbsAlY_subtr1_Yshift"]);

}

void DDEcalPreshowerAlgo::execute(DDCompactView& cpv)
{
  LogDebug("EcalGeom") << "******** DDEcalPreshowerAlgo execute!";

  // creates all the tube-like layers of the preshower
  doLayers(cpv);
  // creates and places the ladders
  doLadders(cpv);  
  // places the slicon strips in active silicon wafers
  doSens(cpv);
  
}

void DDEcalPreshowerAlgo::doLayers(DDCompactView& cpv)
{

  double zpos = -thickness_/2., sdx(0), sdy(0), bdx(0),bdy(0);;

  for(size_t i = 0; i<thickLayers_.size(); ++i) {
    
    int I = int(i)+1; // FOTRAN I (offset +1)
    
    double rIn(0), rOut(0), zHalf(0);
    
    // create the name
    DDName ddname(getLayName(i),"esalgo");   // namespace:name

    // cone dimensions
    rIn   = rminVec[i];
    rOut  = rmaxVec[i];
    zHalf = thickLayers_[i]/2.;

    // create a logical part representing a single layer in the preshower
    DDSolid solid = DDSolidFactory::tubs(ddname, zHalf, rIn, rOut, 0.,360.*deg);

    DDLogicalPart layer = DDLogicalPart(ddname,getMaterial(i),solid);
    
    // position the logical part w.r.t. the parent volume
    zpos += zHalf;
    
    // create a logical part representing a single layer in the preshower
    // skip layers with detectors, front and rear window 
    if (I==2 || I==28 || I==13 || I==23) {
      zpos += zHalf;
      continue;
    }
    
    if ( I==12 ) {
      zlead1_ = zpos + zHalf;
    }
    if ( I==22 ) {
      zlead2_ = zpos + zHalf;
    }
    
    if (I==10 || I==20) { // New lead shape
      
      int absz=0; double outalbx, outalby, shiftR, outalbx2, outalby2, shiftR2;

      absz = int(abs1stx.size()); 
      if ( I==20) absz = int(abs2ndx.size()); 
      int cutabsx=-1, cutabsy=-1;

      DDName dd_Alname_f(getLayName(i)+"LOutAl","esalgo");
      DDName dd_Alname_g(getLayName(i)+"LOutAl2","esalgo");
      DDName dd_Alname_h(getLayName(i)+"LOutAltmp","esalgo");
      DDName dd_Alname_i(getLayName(i)+"LOutAltmp2","esalgo");
      DDName dd_Alname_j(getLayName(i)+"LOutAltmp3","esalgo");

      DDSolid Out_Al = DDSolidFactory::tubs(dd_Alname_f,zHalf-0.1*mm,rMax_Abs_Al_-20*cm,rMax_Abs_Al_,0.,90.*deg); 
      outalbx = absAlX_X_; outalby = rMax_Abs_Al_+0.1*mm-absAlX_subtr1_Yshift_; shiftR = absAlX_subtr1_Yshift_;
      if ( I==20)  {  outalbx = absAlY_X_; outalby = rMax_Abs_Al_+0.1*mm-absAlY_subtr1_Yshift_; shiftR =  absAlY_subtr1_Xshift_; } 

      DDSolid OutAltmp = DDSolidFactory::box(dd_Alname_h,outalbx/2+0.1*mm,outalby/2+0.1*mm,zHalf);
      DDSolid Out_Altmp3 = DDSolidFactory::subtraction(dd_Alname_j,Out_Al,OutAltmp,DDTranslation(outalbx/2,outalby/2+shiftR,0),DDRotation());

      outalby2 = absAlX_Y_; outalbx2 = rMax_Abs_Al_+0.1*mm-absAlX_subtr1_Xshift_; shiftR2 = absAlX_subtr1_Xshift_;
     if ( I==20)  { outalby2 = absAlY_Y_; outalbx2 = rMax_Abs_Al_+0.1*mm-absAlY_subtr1_Xshift_; shiftR2 = absAlY_subtr1_Xshift_; }
      DDSolid OutAltmp2 = DDSolidFactory::box(dd_Alname_i,outalbx2/2+0.1*mm,outalby2/2+0.1*mm,zHalf);
      DDSolid Out_Al2 = DDSolidFactory::subtraction(dd_Alname_g,Out_Altmp3,OutAltmp2,DDTranslation(outalbx2/2+shiftR2,outalby2/2,0),DDRotation());
  
      for (int L=0; L<absz; ++L) {
        int K=L; 
        std::ostringstream  tmp_name_b, tmp_name_b2, tmp_FAl_name_c, tmp_FAl_name_d;
        tmp_name_b << getLayName(i) << "L" << K; 
        tmp_name_b2 << getLayName(i) << "Lb2" << K; 

     if(L==0) tmp_FAl_name_c << getLayName(i)<<"LOutAl2"; 
     if(L>0) tmp_FAl_name_c << getLayName(i) << "LtmpAl" << K-1; 

        tmp_FAl_name_d << getLayName(i) << "LtmpAl" << K; 

        DDName dd_tmp_name_b(tmp_name_b.str(),"esalgo");
        DDName dd_tmp_name_b2(tmp_name_b2.str(),"esalgo");
        DDName dd_FAl_name_c(tmp_FAl_name_c.str(),"esalgo");
        DDName dd_FAl_name_d(tmp_FAl_name_d.str(),"esalgo");

        if(L==0) bdx = std::abs(abs1stx[K])/2; 
        if(L>0) bdx = std::abs(abs1stx[K]-abs1stx[K-1])/2; 
        bdy=abs1sty[K];
        if(abs1stx[K] < rIn+30*cm) { bdy=abs1sty[K]/2 - 30*cm; cutabsx = K;}
        
        if(I==20) { if(L==0) bdx = std::abs(abs2ndx[K])/2; 
                if(L>0) bdx = std::abs(abs2ndx[K]-abs2ndx[K-1])/2;
                bdy=abs2ndy[K];}
        
        if((abs2ndx[K] < rIn+30*cm) && I==20) { bdy=abs2ndy[K]/2 - 30*cm; cutabsy = K;}
        
        DDSolid solid_b = DDSolidFactory::box(dd_tmp_name_b,bdx,bdy,zHalf);
        DDSolid solid_b2 = DDSolidFactory::box(dd_tmp_name_b2,bdx+0.1*mm,bdy+0.1*mm,zHalf);
        
        sdx = abs1stx[K]-bdx ; sdy = 0;
        if(abs1stx[K] < rIn+30*cm ) sdy = abs1sty[K]-bdy ; 
        
        if(I==20) {sdx = abs2ndx[K]-bdx ; sdy = 0;}
        if((abs2ndx[K] < rIn+30*cm) && I==20 ) sdy = abs2ndy[K]-bdy ;
                
        DDLogicalPart layer = DDLogicalPart(dd_tmp_name_b,getMaterial(i),solid_b);
        
        cpv.position(layer, parent(), 1, DDTranslation(sdx,sdy, zpos), DDRotation());
        cpv.position(layer, parent(), 2, DDTranslation(-sdx,sdy, zpos), DDRotation());
         DDSolid solid_c = DDSolid(dd_FAl_name_c);  
         DDSolid solid_d = DDSolidFactory::subtraction(dd_FAl_name_d,solid_c,solid_b2,DDTranslation(sdx,sdy,0),DDRotation());
        if(((abs1stx[K] < rIn+30*cm) && I==10) || ((abs2ndx[K] < rIn+30*cm) && I==20) ) { 
          cpv.position(layer, parent(), 3, DDTranslation(sdx,-sdy, zpos), DDRotation());
          cpv.position(layer, parent(), 4, DDTranslation(-sdx,-sdy, zpos), DDRotation());
         DDSolid solid_c = DDSolid(dd_FAl_name_c);  
         DDSolid solid_d = DDSolidFactory::subtraction(dd_FAl_name_d,solid_c,solid_b2,DDTranslation(sdx,sdy,0),DDRotation());
        }               


      }  
      


      DDName dd_tmp_name_b(getLayName(i)+"Lcut","esalgo");
      DDName dd_tmp_name_c(getLayName(i)+"tmpb","esalgo");
      DDName dd_tmp_name_d(getLayName(i)+"LinPb","esalgo");

      DDName dd_tmp_name_e(getLayName(i)+"LinAl","esalgo");
      DDName dd_tmp_name_f(getLayName(i)+"LOutAl","esalgo");

      
      bdx = abs1stx[cutabsx]; bdy=2*30*cm;
      if(I==20) bdx = abs2ndx[cutabsy]; bdy=2*30*cm;
      
      DDSolid solidcut = DDSolidFactory::box(dd_tmp_name_b,bdx,bdy,zHalf);

      DDSolid iner = DDSolidFactory::tubs(dd_tmp_name_c,zHalf+0.1*mm,0,In_rad_Abs_Pb,0.,360.*deg); 


      DDSolid final = DDSolidFactory::subtraction(dd_tmp_name_d,solidcut,iner,DDTranslation(0,0,0),DDRotation());

      
      DDLogicalPart layer = DDLogicalPart(dd_tmp_name_d,getMaterial(i),final);
      cpv.position(layer, parent(), 1, DDTranslation(0,0, zpos), DDRotation());

      DDSolid iner_Al = DDSolidFactory::tubs(dd_tmp_name_e,zHalf,In_rad_Abs_Al,In_rad_Abs_Pb-0.01*mm,0.,360.*deg); 
      DDLogicalPart layerAl = DDLogicalPart(dd_tmp_name_e,getMaterial(i-1),iner_Al);
      cpv.position(layerAl, parent(), 1, DDTranslation(0,0, zpos), DDRotation());
  
        std::ostringstream  tmp_Alname_fin;
        tmp_Alname_fin << getLayName(i) << "LtmpAl" << absz-1; 
        DDName dd_Alname_fin(tmp_Alname_fin.str(),"esalgo");

      DDSolid Outer_Al = DDSolid(dd_Alname_fin);

      DDLogicalPart layerFinOutAl = DDLogicalPart(dd_tmp_name_f,getMaterial(i-1),Outer_Al);

     cpv.position(layerFinOutAl, parent(), 1, DDTranslation(0,0, zpos), DDRotation());
     cpv.position(layerFinOutAl, parent(), 2, DDTranslation(0,0, zpos), DDRotation("esalgo:RABS90"));
     cpv.position(layerFinOutAl, parent(), 3, DDTranslation(0,0, zpos), DDRotation("esalgo:RABS180B"));
     cpv.position(layerFinOutAl, parent(), 4, DDTranslation(0,0, zpos), DDRotation("esalgo:R180"));
  

    
    } else {
      
      cpv.position(layer, parent(), 1, DDTranslation(0.,0., zpos), DDRotation());
      
      LogDebug("SFGeom")<<" debug : tubs, Logical part: "<<DDLogicalPart(ddname,getMaterial(i),solid)<<"\n translation "<<DDTranslation(0.,0.,zpos)<<" rotation "<<DDRotation()<< "\n";
    } 
    
    zpos += zHalf; 
  }
  
}

void DDEcalPreshowerAlgo::doLadders(DDCompactView& cpv) {
  
  double xpos(0), ypos(0), zpos(0), sdx(0), sdy(0), sdz(0);
  double prev_length_(0), ladder_new_length_(0), ladd_shift_(0), ladder_length (0);
  int enb(0), swed_scopy_glob(0); double sdxe[50] = {0}, sdye[50] = {0}, sdze[50] = {0};
  double sdxe2[50] = {0}, sdye2[50] = {0}, sdze2[50] = {0}, sdxe3[50] = {0}, sdye3[50] = {0}, sdze3[50] = {0};
  
  for (int M=0; M<int(types_l5_.size() + types_l4_.size()); M++) {
    int scopy(0); double boxax(0), boxay(0), boxaz(0);
    int ladd_not_plain(0), ladd_subtr_no(0), ladd_upper(0), ladd_side(0);
    
    DDSolid solid_lfront = DDSolidFactory::trap(DDName("LDRFRNT","esalgo"),
                                                LdrFrnt_Length/2,   // pDz
                                                -wedge_angle,     // pTheta
                                                0,              // pPhi
                                                ladder_width/2, // pDy1
                                                (ladder_thick)/2,  // pDx1
                                                (ladder_thick)/2,   //     pDx2
                                                0,              //pAlp1
                                                ladder_width/2,   //pDy2
                                                (ladder_thick-ceramic_length*sin(wedge_angle*2))/2,   // pDx3
                                                (ladder_thick-ceramic_length*sin(wedge_angle*2))/2,   // pDx4
                                                0 );
    
    
    DDSolid solid_lbck = DDSolidFactory::trap(DDName("LDRBCK","esalgo"),
                                              LdrBck_Length/2,   // pDz
                                              -wedge_angle,     // pTheta
                                              0,                // pPhi
                                              ladder_width/2,   // pDy1
                                              (box_thick/cos(wedge_angle*2)+0.02*mm)/2,  // pDx1
                                              (box_thick/cos(wedge_angle*2)+0.02*mm)/2,   //     pDx2
                                              0,                //pAlp1
                                              ladder_width/2,   //pDy2
                                              (ladder_thick-wedge_back_thick)/2,   // pDx3
                                              (ladder_thick-wedge_back_thick)/2,   // pDx4
                                              0 );
    
    DDSolid solid_lfhalf = DDSolidFactory::trap(DDName("LDRFHALF","esalgo"),
                                                LdrFrnt_Length/2,   // pDz
                                                -wedge_angle,     // pTheta
                                                0,              // pPhi
                                                (ladder_width/2)/2,     // pDy1
                                                (ladder_thick)/2,  // pDx1
                                                (ladder_thick)/2,   //     pDx2
                                                0,              //pAlp1
                                                (ladder_width/2)/2,   //pDy2
                                                (ladder_thick-ceramic_length*sin(wedge_angle*2))/2,   // pDx3
                                                (ladder_thick-ceramic_length*sin(wedge_angle*2))/2,   // pDx4
                                                0 );
    
    DDSolid solid_lbhalf = DDSolidFactory::trap(DDName("LDRBHALF","esalgo"),
                                                LdrBck_Length/2,   // pDz
                                                -wedge_angle,     // pTheta
                                                0,              // pPhi
                                                (ladder_width/2)/2,     // pDy1
                                                (box_thick/cos(wedge_angle*2)+0.02*mm)/2,  // pDx1
                                                (box_thick/cos(wedge_angle*2)+0.02*mm)/2,   //     pDx2
                                                0,              //pAlp1
                                                (ladder_width/2)/2,   //pDy2
                                                (ladder_thick-wedge_back_thick)/2,   // pDx3
                                                (ladder_thick-wedge_back_thick)/2,   // pDx4
                                                0 );
    
    DDSolid solid_lfhtrunc = DDSolidFactory::trap(DDName("LDRFHTR","esalgo"),
                                                  (LdrFrnt_Length-waf_active)/2,   // pDz
                                                  -wedge_angle,     // pTheta
                                                  0,            // pPhi
                                                  (ladder_width/2)/2,   // pDy1
                                                  (ladder_thick)/2,  // pDx1
                                                  (ladder_thick)/2,   //     pDx2
                                                  0,            //pAlp1
                                                  (ladder_width/2)/2,   //pDy2
                                                  (ladder_thick-(ceramic_length-waf_active)*sin(wedge_angle*2))/2,   // pDx3
                                                  (ladder_thick-(ceramic_length-waf_active)*sin(wedge_angle*2))/2,   // pDx4
                                                  0 );

// Creation of ladders with 5 micromodules length
    
    if(M<int(types_l5_.size())) {
      
      
      for (int i=0; i<=1; i++) {
        for (int j=0; j<=3; j++) {
          if(ladd_l5_map_[(i+j*2+M*10)]!=1){
            ladd_not_plain=1; ladd_subtr_no++; if(j>1) ladd_upper=1; ladd_side=i;
          }
        }
      }
      
      DDName ddname(getLadPrefix(0)+types_l5_[M],"esalgo");
      ladder_length = micromodule_length + 4*waf_active + 0.1*mm;
      
      
      if(ladd_not_plain) {   
        //          enb++; 
        std::ostringstream tmp_name_5b, tmp_name_5c, tmp_name_5d;
        if(ladd_upper) {
          
          
        }//upper
        else {
          enb++; 
          std::ostringstream tmp_name_5b, tmp_name_5c, tmp_name_5d;
          DDName dd_tmp_name_5a(getLadPrefix(2),"esalgo");
          tmp_name_5b <<getLadPrefix(3)<< enb;
          DDName dd_tmp_name_5b(tmp_name_5b.str(),"esalgo");        
          tmp_name_5c <<getLadPrefix(4)<< enb;
          DDName dd_tmp_name_5c(tmp_name_5c.str(),"esalgo");        
          tmp_name_5d << getLadPrefix(5) << enb;
          DDName dd_tmp_name_5d(tmp_name_5d.str(),"esalgo");
          
          DDName dd_tmp_name_5e(getLadPrefix(6),"esalgo");
          
          boxay =  ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;
          
          DDSolid solid_5a = DDSolidFactory::box(dd_tmp_name_5a,boxax/2,boxay/2,boxaz/2.);
          if(ladd_side==0) sdxe[enb] = ladder_width/4; sdye[enb]= -boxay/2 - LdrFrnt_Length/2; sdze[enb] = -ladder_thick/2. + LdrFrnt_Offset;
          if(ladd_side==1) sdxe[enb] = -ladder_width/4;
          
          DDSolid solid_5b = DDSolidFactory::unionSolid(dd_tmp_name_5b,solid_5a,solid_lfhalf,DDTranslation(sdxe[enb],sdye[enb],sdze[enb]),DDRotation("esalgo:RM1299"));
          
          if(ladd_side==0) sdxe2[enb] = -ladder_width/4; sdye2[enb]= -boxay/2 - LdrFrnt_Length/2 + waf_active/2;
          sdze2[enb] = -ladder_thick/2. + LdrFrnt_Offset + (waf_active*sin(wedge_angle*2))/4;
          if(ladd_side==1) sdxe2[enb] = ladder_width/4;
          
          DDSolid solid_5c = DDSolidFactory::unionSolid(dd_tmp_name_5c,solid_5b,solid_lfhtrunc,DDTranslation(sdxe2[enb],sdye2[enb],sdze2[enb]),DDRotation("esalgo:RM1299"));
          
          sdxe3[enb] = 0; sdye3[enb] = boxay/2 + LdrBck_Length/2; sdze3[enb] = -ladder_thick/2. + LdrBck_Offset;
          DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_5c,solid_lbck,DDTranslation(sdxe3[enb],sdye3[enb],sdze3[enb]),DDRotation("esalgo:RM1299"));      
          
          DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid); 
          DDName ddname2(getLadPrefix(1)+types_l5_[M],"esalgo");      
          DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);  
          
        }
        
      } //end of not plain ladder shape
      else {
        
        
        
        DDName dd_tmp_name_5pa(getLadPrefix(2)+"5p","esalgo");
        DDName dd_tmp_name_5pb(getLadPrefix(3)+"5p","esalgo");
        
        boxay = ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;
        
        DDSolid solid_5pa = DDSolidFactory::box(dd_tmp_name_5pa,boxax/2,boxay/2,boxaz/2.);
        sdx = 0; sdy= -boxay/2 - LdrFrnt_Length/2; sdz = -ladder_thick/2. + LdrFrnt_Offset;
        
        DDSolid solid_5pb = DDSolidFactory::unionSolid(dd_tmp_name_5pb,solid_5pa,solid_lfront,DDTranslation(sdx,sdy,sdz),DDRotation("esalgo:RM1299"));
        
        sdx = 0; sdy= boxay/2 + LdrBck_Length/2; sdz = -ladder_thick/2. + LdrBck_Offset;
        
        DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_5pb,solid_lbck,DDTranslation(sdx,sdy,sdz),DDRotation("esalgo:RM1299"));
        
        DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid); 
        DDName ddname2(getLadPrefix(1)+types_l5_[M],"esalgo");      
        DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);  
        
      }
    }

// Creation of ladders with 4 micromodules length

    if( M >= int(types_l5_.size()) ) {
      int d = M - types_l5_.size();
           
      for (int i=0; i<=1; i++) {
        for (int j=0; j<=3; j++) {
          if(ladd_l4_map_[(i+j*2+(M-types_l5_.size())*8)]!=1 ){
            ladd_not_plain=1; ladd_subtr_no++; if(j>1) ladd_upper=1; ladd_side=i;
          }
        }
      }
      
      DDName ddname(getLadPrefix(0)+types_l4_[d],"esalgo");      
      ladder_length = micromodule_length + 3*waf_active + 0.1*mm;      
      
      if(ladd_not_plain) {        
        std::ostringstream tmp_name_b, tmp_name_c, tmp_name_d;
        if(ladd_upper) {
          enb++; 
          
          DDName dd_tmp_name_a(getLadPrefix(7),"esalgo");
          tmp_name_b <<getLadPrefix(8)<< enb;
          DDName dd_tmp_name_b(tmp_name_b.str(),"esalgo");      
          tmp_name_c <<getLadPrefix(9)<< enb;
          DDName dd_tmp_name_c(tmp_name_c.str(),"esalgo");          
          tmp_name_d << getLadPrefix(10) << enb;
          DDName dd_tmp_name_d(tmp_name_d.str(),"esalgo");
          DDName dd_tmp_name_e(getLadPrefix(11),"esalgo");           
          
          boxay =  ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;
          DDSolid solid_a = DDSolidFactory::box(dd_tmp_name_a,boxax/2,boxay/2,boxaz/2.);
          
          sdxe[enb] = 0; sdye[enb]= -boxay/2 - LdrFrnt_Length/2; sdze[enb] = -ladder_thick/2. + LdrFrnt_Offset;
          DDSolid solid_b = DDSolidFactory::unionSolid(dd_tmp_name_b,solid_a,solid_lfront,DDTranslation(sdxe[enb],sdye[enb],sdze[enb]),DDRotation("esalgo:RM1299"));
          
          if(ladd_side==0) sdxe2[enb] = ladder_width/4; sdye2[enb] = boxay/2 + LdrBck_Length/2; sdze2[enb] = -ladder_thick/2. + LdrBck_Offset;
          if(ladd_side==1) sdxe2[enb] = -ladder_width/4; 
          DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_b,solid_lbhalf,DDTranslation(sdxe2[enb],sdye2[enb],sdze2[enb]),DDRotation("esalgo:RM1299"));      
          
          DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid);
          DDName ddname2(getLadPrefix(1)+types_l4_[d],"esalgo"); 
          DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);   
          
        }//upper
        else {
          if(ladd_subtr_no>1) {
            enb++; 
            
            DDName dd_tmp_name_a(getLadPrefix(7),"esalgo");
            tmp_name_b <<getLadPrefix(8)<< enb;
            DDName dd_tmp_name_b(tmp_name_b.str(),"esalgo");    
            tmp_name_c <<getLadPrefix(9)<< enb;
            DDName dd_tmp_name_c(tmp_name_c.str(),"esalgo");        
            tmp_name_d << getLadPrefix(10) << enb;
            DDName dd_tmp_name_d(tmp_name_d.str(),"esalgo");
            DDName dd_tmp_name_e(getLadPrefix(11),"esalgo");           
            
            boxay =  ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;

            DDSolid solid_a = DDSolidFactory::box(dd_tmp_name_a,boxax/2,boxay/2,boxaz/2.);
            if(ladd_side==0) sdxe[enb] = ladder_width/4; sdye[enb]= -boxay/2 - LdrFrnt_Length/2; sdze[enb] = -ladder_thick/2. + LdrFrnt_Offset;
            if(ladd_side==1) sdxe[enb] = -ladder_width/4;
            
            DDSolid solid_b = DDSolidFactory::unionSolid(dd_tmp_name_b,solid_a,solid_lfhalf,DDTranslation(sdxe[enb],sdye[enb],sdze[enb]),DDRotation("esalgo:RM1299"));
            
            sdxe2[enb] = 0; sdye2[enb] = boxay/2 + LdrBck_Length/2; sdze2[enb] = -ladder_thick/2. + LdrBck_Offset;
            
            DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_b,solid_lbck,DDTranslation(sdxe2[enb],sdye2[enb],sdze2[enb]),DDRotation("esalgo:RM1299"));      
            
            DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid);
            DDName ddname2(getLadPrefix(1)+types_l4_[d],"esalgo"); 
            DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);
          } else {
            enb++; 
            DDName dd_tmp_name_a(getLadPrefix(7),"esalgo");
            tmp_name_b <<getLadPrefix(8)<< enb;
            DDName dd_tmp_name_b(tmp_name_b.str(),"esalgo");    
            tmp_name_c <<getLadPrefix(9)<< enb;
            DDName dd_tmp_name_c(tmp_name_c.str(),"esalgo");        
            tmp_name_d << getLadPrefix(10) << enb;
            DDName dd_tmp_name_d(tmp_name_d.str(),"esalgo");
            DDName dd_tmp_name_e(getLadPrefix(11),"esalgo");           
            
            boxay =  ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;
            DDSolid solid_a = DDSolidFactory::box(dd_tmp_name_a,boxax/2,boxay/2,boxaz/2.);
            if(ladd_side==0) sdxe[enb] = ladder_width/4; sdye[enb]= -boxay/2 - LdrFrnt_Length/2; sdze[enb] = -ladder_thick/2. + LdrFrnt_Offset;
            if(ladd_side==1) sdxe[enb] = -ladder_width/4;
            
            DDSolid solid_b = DDSolidFactory::unionSolid(dd_tmp_name_b,solid_a,solid_lfhalf,DDTranslation(sdxe[enb],sdye[enb],sdze[enb]),DDRotation("esalgo:RM1299"));
            
            if(ladd_side==0) sdxe2[enb] = -ladder_width/4; sdye2[enb]= -boxay/2 - LdrFrnt_Length/2 + waf_active/2;
            sdze2[enb] = -ladder_thick/2. + LdrFrnt_Offset + (waf_active*sin(wedge_angle*2))/4;
            if(ladd_side==1) sdxe2[enb] = ladder_width/4;
            
            DDSolid solid_c = DDSolidFactory::unionSolid(dd_tmp_name_c,solid_b,solid_lfhtrunc,DDTranslation(sdxe2[enb],sdye2[enb],sdze2[enb]),DDRotation("esalgo:RM1299"));
            
            sdxe3[enb] = 0; sdye3[enb] = boxay/2 + LdrBck_Length/2; sdze3[enb] = -ladder_thick/2. + LdrBck_Offset;
            DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_c,solid_lbck,DDTranslation(sdxe3[enb],sdye3[enb],sdze3[enb]),DDRotation("esalgo:RM1299"));      
            
            DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid);
            DDName ddname2(getLadPrefix(1)+types_l4_[d],"esalgo"); 
            DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);
            
          }     
        }
        
      } //end of not plain ladder shape
      else {
        DDName dd_tmp_name_pa(getLadPrefix(2)+"p","esalgo");
        DDName dd_tmp_name_pb(getLadPrefix(3)+"p","esalgo");
        
        boxay = ladder_length-LdrFrnt_Length-LdrBck_Length; boxax = ladder_width; boxaz = ladder_thick;
        
        DDSolid solid_pa = DDSolidFactory::box(dd_tmp_name_pa,boxax/2,boxay/2,boxaz/2.);
        sdx = 0; sdy= -boxay/2 - LdrFrnt_Length/2; sdz = -ladder_thick/2. + LdrFrnt_Offset;
        
        DDSolid solid_pb = DDSolidFactory::unionSolid(dd_tmp_name_pb,solid_pa,solid_lfront,DDTranslation(sdx,sdy,sdz),DDRotation("esalgo:RM1299"));
        
        sdx = 0; sdy= boxay/2 + LdrBck_Length/2; sdz = -ladder_thick/2. + LdrBck_Offset;
        DDSolid solid = DDSolidFactory::unionSolid(ddname,solid_pb,solid_lbck,DDTranslation(sdx,sdy,sdz),DDRotation("esalgo:RM1299"));          
        DDLogicalPart ladder = DDLogicalPart(ddname,getLaddMaterial(),solid);
        DDName ddname2(getLadPrefix(1)+types_l4_[d],"esalgo"); 
        DDLogicalPart ladder2 = DDLogicalPart(ddname2,getLaddMaterial(),solid);
      }
    }
   
// insert SWED, SFBX and SFBY into ladders
  swed_scopy_glob++;
    if(M<int(types_l5_.size())) {
      DDName ddname(getLadPrefix(0)+types_l5_[M],"esalgo");
      DDName ddname2(getLadPrefix(1)+types_l5_[M],"esalgo"); 
      for (int i=0; i<=1; i++) {
        for (int j=0; j<=4; j++) {
          xpos = (i*2-1)*waf_intra_col_sep/2.; ypos = -ladder_length/2. + 0.05*mm -(LdrFrnt_Length-LdrBck_Length)/2 + wedge_length/2. + j*waf_active;
          zpos = -ladder_thick/2. + 0.005*mm + wedge_offset;
          if(ladd_l5_map_[(i+j*2+M*10)]==1) {
            scopy ++;
            cpv.position(DDLogicalPart("esalgo:SWED"), ddname, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1299"));
            cpv.position(DDLogicalPart("esalgo:SWED"), ddname2, scopy+1000*swed_scopy_glob+100, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1299"));
            
            ypos = ypos + ywedge_ceramic_diff; zpos = -ladder_thick/2. + 0.005*mm + zwedge_ceramic_diff;
            cpv.position(DDLogicalPart("esalgo:SFBX"), ddname, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1298"));
            cpv.position(DDLogicalPart("esalgo:SFBY"), ddname2, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1300A")); 
          }
        }
      }
    }
    else
      {
        int d = M - types_l5_.size();
        DDName ddname(getLadPrefix(0)+types_l4_[d],"esalgo"); 
        DDName ddname2(getLadPrefix(1)+types_l4_[d],"esalgo");  
        for (int i=0; i<=1; i++) {
          for (int j=0; j<=3; j++) {
            xpos = (i*2-1)*waf_intra_col_sep/2.; ypos = -ladder_length/2. + 0.05*mm - (LdrFrnt_Length-LdrBck_Length)/2 + wedge_length/2. + j*waf_active;
            zpos = -ladder_thick/2. + 0.005*mm + wedge_offset;
            if(ladd_l4_map_[(i+j*2+(M-types_l5_.size())*8)]==1) {
              scopy ++;
              cpv.position(DDLogicalPart("esalgo:SWED"), ddname, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1299"));
              cpv.position(DDLogicalPart("esalgo:SWED"), ddname2, scopy+1000*swed_scopy_glob+100, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1299"));

              ypos = ypos + ywedge_ceramic_diff; zpos = -ladder_thick/2. + 0.005*mm + zwedge_ceramic_diff;
              cpv.position(DDLogicalPart("esalgo:SFBX"), ddname, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1298"));
              cpv.position(DDLogicalPart("esalgo:SFBY"), ddname2, scopy+1000*swed_scopy_glob, DDTranslation(xpos,ypos,zpos), DDRotation("esalgo:RM1300A"));
            }
          }
        }
      }
  }

// Positioning of ladders

  std::string type;
  int icopy[100] = {0};

  for(int I=-9; I<=9;++I) {
    prev_length_=0; int J=std::abs(I);
    for (int K=0; K<noLaddInCol_[J]; K++) {
      std::string type;

      ladder_new_length_ = micromodule_length + 3*waf_active;
      ladd_shift_ = 4*waf_active;

      if(K==0) type = typeOfLaddRow0[J]; 
      if(K==1) type = typeOfLaddRow1[J];
      if(K==2) type = typeOfLaddRow2[J];
      if(K==3) type = typeOfLaddRow3[J]; 

      for(int i=0;i<int(types_l5_.size());i++) if(type == types_l5_[i]) {
        ladder_new_length_ = micromodule_length + 4*waf_active;
        ladd_shift_ = 5*waf_active;}
      
      int j = 0;
      
      for(int t=0;t<int(types_l5_.size());t++) if(type == types_l5_[t]) {j = t; if(I<0 && asym_ladd_[t] == 1 ) {j = j + 1;  type = types_l5_[j];}} 
      for(int t=0;t<int(types_l4_.size());t++) if(type == types_l4_[t]) {j = t+types_l5_.size(); if(I<0 && asym_ladd_[(t+types_l5_.size())] == 1 ) {j = j + 1; type = types_l4_[j-types_l5_.size()];}}
      
      xpos = I*(2*waf_intra_col_sep + waf_inter_col_sep);
      if(I>0) xpos = xpos + dee_separation;
      if(I<0) xpos = xpos - dee_separation;

      int sz = 20;    
      ypos = (sz-int(startOfFirstLadd_[J]))*waf_active - ladder_new_length_/2. + (LdrFrnt_Length-LdrBck_Length)/2 + micromodule_length + 0.05*cm - prev_length_;

      prev_length_ += ladd_shift_;        
      
      zpos = zlead1_ + ladder_thick/2. + 0.01*mm;
      icopy[j] +=1;
      DDName ddname(getLadPrefix(0)+type,"esalgo"); 
      
      cpv.position(DDLogicalPart(ddname), DDName("SF","esalgo"), icopy[j], DDTranslation(xpos,ypos,zpos), DDRotation());

      DDName ddname2(getLadPrefix(1)+type,"esalgo"); 
      
      xpos = I*(2*waf_intra_col_sep + waf_inter_col_sep);
      
      cpv.position(DDLogicalPart(ddname2), DDName("SF","esalgo"), icopy[j], DDTranslation(ypos,-xpos,zpos-zlead1_+zlead2_), DDRotation("esalgo:R270"));

      int changed = 0;
      for(int t=0;t<int(types_l5_.size());t++) if(type == types_l5_[t]) {j = t; if(asym_ladd_[t] == 2 && !changed) { j = j - 1; changed = 1;} if(asym_ladd_[t] == 1 && !changed) { j = j + 1; changed = 1;}  type = types_l5_[j];} 
      for(int t=0;t<int(types_l4_.size());t++) if(type == types_l4_[t]) {j = t+types_l5_.size(); if(asym_ladd_[(t+types_l5_.size())] == 2 && !changed) { j = j - 1; changed = 1;} if(asym_ladd_[(t+types_l5_.size())] == 1 && !changed) { j = j + 1; changed = 1;} type = types_l4_[j-types_l5_.size()]; }
      
      icopy[j] +=1;

      if(I>0) xpos = xpos + dee_separation;
      if(I<0) xpos = xpos - dee_separation;

      DDName ddname3(getLadPrefix(0)+type,"esalgo");       
      cpv.position(DDLogicalPart(ddname3), DDName("SF","esalgo"), icopy[j], DDTranslation(xpos,-ypos,zpos), DDRotation("esalgo:R180"));

      DDName ddname4(getLadPrefix(1)+type,"esalgo"); 

      xpos = I*(2*waf_intra_col_sep + waf_inter_col_sep);

      cpv.position(DDLogicalPart(ddname4), DDName("SF","esalgo"), icopy[j], DDTranslation(-ypos,-xpos,zpos-zlead1_+zlead2_), DDRotation("esalgo:R090"));

    }
  } 
}

void DDEcalPreshowerAlgo::doSens(DDCompactView& cpv) {
  
  double xpos(0), ypos(0);
  for(size_t i = 0; i<32; ++i)
    {
      xpos = -waf_active/2. + i*waf_active/32. + waf_active/64.;
      cpv.position(DDLogicalPart("esalgo:SFSX"), DDName("SFWX","esalgo"), i+1, DDTranslation(xpos,0., 0.),DDRotation());
      
      LogDebug("SFGeom")<<" debug : SFSX, Logical part: "<<DDLogicalPart("esalgo:SFSX")<<"\n translation "<<DDTranslation(xpos,0.,0.)<<" rotation "<<DDRotation()<<" copy number= " <<i<<"\n";
      
      ypos = -waf_active/2. + i*waf_active/32. + waf_active/64.;
      cpv.position(DDLogicalPart("esalgo:SFSY"),DDName("SFWY","esalgo"), i+1, DDTranslation(0.,ypos, 0.), DDRotation());
      
      LogDebug("SFGeom")<<" debug : SFSY, Logical part: "<<DDLogicalPart("esalgo:SFSY")<<"\n translation "<<DDTranslation(0.,ypos,0.)<<" rotation "<<DDRotation()<< " copy number= " <<i<< "\n";
      
    }
}