CMSSW Reference Manual

00001 # The following comments couldn't be translated into the new config version:
00002 
00003 # Work-around because of a bug in HLT 
00004 # Reconstruction sequence
00005 import FWCore.ParameterSet.Config as cms
00006 
00007 process = cms.Process("HLT")
00008 process.load("Configuration.Generator.PythiaUESettings_cfi")
00009 
00010 # Famos sequences (With HLT)
00011 process.load("FastSimulation.Configuration.CommonInputsFake_cff")
00012 
00013 process.load("FastSimulation.Configuration.FamosSequences_cff")
00014 
00015 # L1 Emulator and HLT Setup
00016 process.load("FastSimulation.HighLevelTrigger.common.HLTSetup_cff")
00017 
00018 process.load("PhysicsTools.HepMCCandAlgos.genEventWeight_cfi")
00019 
00020 process.load("PhysicsTools.HepMCCandAlgos.genEventScale_cfi")
00021 
00022 # HLT paths
00023 process.load("HLTrigger.Configuration.main.HLTpaths_cff")
00024 
00025 # To write out events 
00026 process.load("FastSimulation.Configuration.EventContent_cff")
00027 
00028 # Keep the logging output to a nice level #
00029 process.load("FWCore.MessageService.MessageLogger_cfi")
00030 
00031 process.configurationMetadata = cms.untracked.PSet(
00032     version = cms.untracked.string('$Revision: 1.2 $'),
00033     name = cms.untracked.string('$Source: /cvs_server/repositories/CMSSW/CMSSW/FastSimulation/Validation/python/HiggsZZ4LM190_cfg.py,v $'),
00034     annotation = cms.untracked.string('RelVal FastSim Higgs to ZZ to 4 leptons at 190 GeV')
00035 )
00036 process.ReleaseValidation = cms.untracked.PSet(
00037     eventsPerJob = cms.untracked.uint32(1000),
00038     totalNumberOfEvents = cms.untracked.uint32(25000),
00039     primaryDatasetName = cms.untracked.string('RelValFastSimHiggsZZ4LM190')
00040 )
00041 process.maxEvents = cms.untracked.PSet(
00042     input = cms.untracked.int32(10)
00043 )
00044 process.RandomNumberGeneratorService = cms.Service("RandomNumberGeneratorService",
00045     # This is to initialize the random engines of Famos
00046     moduleSeeds = cms.PSet(
00047         l1ParamMuons = cms.untracked.uint32(54525),
00048         caloRecHits = cms.untracked.uint32(654321),
00049         MuonSimHits = cms.untracked.uint32(97531),
00050         muonCSCDigis = cms.untracked.uint32(525432),
00051         muonDTDigis = cms.untracked.uint32(67673876),
00052         famosSimHits = cms.untracked.uint32(13579),
00053         paramMuons = cms.untracked.uint32(54525),
00054         famosPileUp = cms.untracked.uint32(918273),
00055         VtxSmeared = cms.untracked.uint32(123456789),
00056         muonRPCDigis = cms.untracked.uint32(524964),
00057         siTrackerGaussianSmearingRecHits = cms.untracked.uint32(24680)
00058     ),
00059     # This is to initialize the random engine of the source
00060     sourceSeed = cms.untracked.uint32(123456789)
00061 )
00062 
00063 process.source = cms.Source("PythiaSource",
00064     pythiaHepMCVerbosity = cms.untracked.bool(False),
00065     maxEventsToPrint = cms.untracked.int32(0),
00066     pythiaPylistVerbosity = cms.untracked.int32(0),
00067     filterEfficiency = cms.untracked.double(1.0),
00068     PythiaParameters = cms.PSet(
00069         process.pythiaUESettingsBlock,
00070         processParameters = cms.vstring('PMAS(25,1)=190.0 !mass of Higgs', 
00071             'MSEL=0 !(D=1) to select between full user control (0, then use MSUB) and some preprogrammed alternative: QCD hight pT processes (1, then ISUB=11, 12, 13, 28, 53, 68), QCD low pT processes (2, then ISUB=11, 12, 13, 28, 53, 68, 91, 92, 94, 95)', 
00072             'MSUB(102)=1 !ggH', 
00073             'MSUB(123)=1 !ZZ fusion to H', 
00074             'MSUB(124)=1 !WW fusion to H', 
00075             'CKIN(45)=5. !high mass cut on m2 in 2 to 2 process Registered by Chris.Seez@cern.ch', 
00076             'MSTP(25)=2 !Angular decay correlations in H->ZZ->4fermions Registered by Alexandre.Nikitenko@cern.ch', 
00077             'CKIN(46)=150. !high mass cut on secondary resonance m1 in 2->1->2 process Registered by Alexandre.Nikitenko@cern.ch', 
00078             'CKIN(47)=5. !low mass cut on secondary resonance m2 in 2->1->2 process Registered by Alexandre.Nikitenko@cern.ch', 
00079             'CKIN(48)=150. !high mass cut on secondary resonance m2 in 2->1->2 process Registered by Alexandre.Nikitenko@cern.ch', 
00080             'MDME(174,1)=0 !Z decay into d dbar', 
00081             'MDME(175,1)=0 !Z decay into u ubar', 
00082             'MDME(176,1)=0 !Z decay into s sbar', 
00083             'MDME(177,1)=0 !Z decay into c cbar', 
00084             'MDME(178,1)=0 !Z decay into b bbar', 
00085             'MDME(179,1)=0 !Z decay into t tbar', 
00086             'MDME(182,1)=1 !Z decay into e- e+', 
00087             'MDME(183,1)=0 !Z decay into nu_e nu_ebar', 
00088             'MDME(184,1)=1 !Z decay into mu- mu+', 
00089             'MDME(185,1)=0 !Z decay into nu_mu nu_mubar', 
00090             'MDME(186,1)=1 !Z decay into tau- tau+', 
00091             'MDME(187,1)=0 !Z decay into nu_tau nu_taubar', 
00092             'MDME(210,1)=0 !Higgs decay into dd', 
00093             'MDME(211,1)=0 !Higgs decay into uu', 
00094             'MDME(212,1)=0 !Higgs decay into ss', 
00095             'MDME(213,1)=0 !Higgs decay into cc', 
00096             'MDME(214,1)=0 !Higgs decay into bb', 
00097             'MDME(215,1)=0 !Higgs decay into tt', 
00098             'MDME(216,1)=0 !Higgs decay into', 
00099             'MDME(217,1)=0 !Higgs decay into Higgs decay', 
00100             'MDME(218,1)=0 !Higgs decay into e nu e', 
00101             'MDME(219,1)=0 !Higgs decay into mu nu mu', 
00102             'MDME(220,1)=0 !Higgs decay into tau nu tau', 
00103             'MDME(221,1)=0 !Higgs decay into Higgs decay', 
00104             'MDME(222,1)=0 !Higgs decay into g g', 
00105             'MDME(223,1)=0 !Higgs decay into gam gam', 
00106             'MDME(224,1)=0 !Higgs decay into gam Z', 
00107             'MDME(225,1)=1 !Higgs decay into Z Z', 
00108             'MDME(226,1)=0 !Higgs decay into W W'),
00109         # This is a vector of ParameterSet names to be read, in this order
00110         parameterSets = cms.vstring('pythiaUESettings', 
00111             'processParameters')
00112     )
00113 )
00114 
00115 process.Timing = cms.Service("Timing")
00116 
00117 process.o1 = cms.OutputModule("PoolOutputModule",
00118     process.FEVTSIMEventContent,
00119     dataset = cms.untracked.PSet(
00120         dataTier = cms.untracked.string('GEN-SIM-DIGI-RECO')
00121     ),
00122     fileName = cms.untracked.string('FEVTWithHLT.root')
00123 )
00124 
00125 process.simulation = cms.Path(process.simulationWithFamos+process.genEventScale+process.genEventWeight)
00126 process.hltEnd = cms.Sequence(process.dummyModule)
00127 process.reconstruction = cms.Path(process.doCalo+process.towerMakerForAll+process.reconstructionWithFamos)
00128 process.outpath = cms.EndPath(process.o1)
00129 process.famosPileUp.UseTRandomEngine = True
00130 process.famosSimHits.UseTRandomEngine = True
00131 process.siTrackerGaussianSmearingRecHits.UseTRandomEngine = True
00132 process.caloRecHits.UseTRandomEngine = True
00133 process.paramMuons.UseTRandomEngine = True
00134 process.famosPileUp.PileUpSimulator.averageNumber = 0.0
00135 process.load("Configuration.StandardSequences.MagneticField_40T_cff")
00136 #process.load("Configuration.StandardSequences.MagneticField_38T_cff")
00137 process.VolumeBasedMagneticFieldESProducer.useParametrizedTrackerField = True
00138 process.famosSimHits.SimulateCalorimetry = True
00139 process.famosSimHits.SimulateTracking = True
00140 process.messageLogger.destinations = ['detailedInfo.txt']
00141