#include <MeasurementTiltmeter.h>

Inheritance diagram for MeasurementTiltmeter:

Public Member Functions
void	calculateSimulatedValue (ALIbool firstTime) override

void	correctValueAndSigma () override

	MeasurementTiltmeter (const ALIint measdim, ALIstring &type, ALIstring &name)

	MeasurementTiltmeter ()

void	setConversionFactor (const std::vector< ALIstring > &wordlist) override

	~MeasurementTiltmeter () override

Public Member Functions inherited from Measurement
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)

void	AddOptOListItem (OpticalObject *opto)

void	AddOptONameListItem (ALIstring optos)

const std::vector< Entry * > &	affectingEntryList () const

void	buildAffectingEntryList ()

void	buildOptOList ()

virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)

void	calculateOriginalSimulatedValue ()

void	construct ()

void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)

void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)

std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)

const ALIuint	dim () const

void	DumpBadOrderOptOs ()

void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)

void	fillData (ALIuint coor, OpticalAlignParam *oaParam)

const CLHEP::Hep3Vector &	getLightRayDirection () const

const CLHEP::Hep3Vector &	getLightRayPosition () const

ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject *>::const_iterator vocite)

const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const

	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)

	Measurement ()

const ALIstring &	name () const

const std::vector< OpticalObject * > &	OptOList () const

const std::vector< ALIstring > &	OptONameList () const

void	postConstruct ()

const ALIstring &	sensorName ()

void	SetDimension (ALIuint dim)

void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)

void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)

void	setName ()

void	setSigma (ALIint coor, ALIdouble val)

void	setType (ALIstring type)

void	setValue (ALIint coor, ALIdouble val)

void	setValueSimulated (ALIint coor, ALIdouble value)

void	setValueSimulated_orig (ALIint coor, ALIdouble value)

virtual void	setXlaserLine (ALIuint ii, int val)

const ALIdouble *	sigma () const

const ALIdouble	sigma (ALIuint ii) const

virtual const ALIdouble	sigmaDimensionFactor () const

const ALIstring &	type () const

const ALIdouble *	value () const

const ALIdouble	value (ALIuint ii) const

virtual const ALIdouble	valueDimensionFactor () const

bool	valueIsSimulated (ALIint coor)

const ALIdouble	valueSimulated (ALIuint ii) const

const ALIdouble	valueSimulated_orig (ALIuint ii) const

const ALIstring	valueType (ALIuint ii) const

virtual int	xlaserLine (ALIuint ii)

virtual	~Measurement ()

Private Attributes
ALIdouble	theConstantTerm

ALIdouble	theConstantTermSigma

ALIdouble	theFactor

ALIdouble	theFactorSigma

ALIdouble	thePedestal

ALIdouble	thePedestalSigma

Additional Inherited Members
Static Public Member Functions inherited from Measurement
static ALIstring	getCurrentDate ()

static ALIstring	getCurrentTime ()

static ALIstring &	measurementsFileName ()

static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...

static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes inherited from Measurement
static ALIdouble	cameraScaleFactor = 1.

static ALIbool	only1 = false

static ALIstring	only1Date = ""

static ALIstring	only1Time = ""

Protected Member Functions inherited from Measurement
void	printStartCalculateSimulatedValue (const Measurement *meas)

void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Detailed Description

Definition at line 18 of file MeasurementTiltmeter.h.

Constructor & Destructor Documentation

◆ MeasurementTiltmeter() [1/2]

MeasurementTiltmeter::MeasurementTiltmeter	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

inline

Definition at line 20 of file MeasurementTiltmeter.h.

       : Measurement(measdim, type, name),
         theFactor(1.),
         theFactorSigma(0.),
         theConstantTerm(0.),
         theConstantTermSigma(0.),
         thePedestal(0.),
         thePedestalSigma(0.) {}

◆ MeasurementTiltmeter() [2/2]

MeasurementTiltmeter::MeasurementTiltmeter ( )

inline

Definition at line 28 of file MeasurementTiltmeter.h.

28 {}

◆ ~MeasurementTiltmeter()

MeasurementTiltmeter::~MeasurementTiltmeter ( )

inlineoverride

Definition at line 29 of file MeasurementTiltmeter.h.

29 {}

Member Function Documentation

◆ calculateSimulatedValue()

void MeasurementTiltmeter::calculateSimulatedValue ( ALIbool firstTime )

overridevirtual

Reimplemented from Measurement.

Definition at line 20 of file MeasurementTiltmeter.cc.

References DMR_cfg::cerr, gather_cfg::cout, ALIUtils::debug, Measurement::DumpBadOrderOptOs(), beamvalidation::exit(), Measurement::getMeasuringBehaviour(), Measurement::name(), Measurement::OptOList(), Measurement::printStartCalculateSimulatedValue(), and findQualityFiles::size.

                                                                     {
   if (ALIUtils::debug >= 2)
     printStartCalculateSimulatedValue(this);  // important for Examples/FakeMeas
 
   //--------- Check there is only one OptO of type 'tiltmeter'
   std::vector<OpticalObject*>::const_iterator vocite = OptOList().begin();
   if (OptOList().size() != 1 || (*vocite)->type() == "distancemeter") {
     std::cerr << "!!! ERROR in MeasurementTiltmeter: " << name()
               << " There should only be one object of type 'tiltmeter' " << std::endl;
     DumpBadOrderOptOs();
     exit(1);
   }
 
   //---------- Get the behaviour of the object w.r.t the measurement (if it reflects the light, let it traverse it, ...)
   ALIstring behav = getMeasuringBehaviour(vocite);
 
   //---------- participate in Measurement
   LightRay ll;
   (*vocite)->participateInMeasurement(ll, *this, behav);
 
   if (ALIUtils::debug >= 5)
     std::cout << "end calculateSimulatedValue" << std::endl;
 }

◆ correctValueAndSigma()

void MeasurementTiltmeter::correctValueAndSigma ( )

overridevirtual

Reimplemented from Measurement.

Definition at line 97 of file MeasurementTiltmeter.cc.

References gather_cfg::cout, ALIUtils::debug, Measurement::setSigma(), Measurement::setValue(), Measurement::sigma(), mathSSE::sqrt(), theConstantTerm, theConstantTermSigma, theFactor, heppy_batch::val, and Measurement::value().

                                                 {
   ALIdouble val = value()[0];
   ALIdouble sig = sigma()[0];
   if (ALIUtils::debug >= 4)
     std::cout << "MeasurementTiltmeter::correctValueAndSigma: old value" << val << " +- " << sig << std::endl;
   //---------- Substract pedestal
   val -= theConstantTerm;
   //-  sig = sqrt(sig*sig  + thePedestalSigma*thePedestalSigma );
   //-  std::cout << " sigma + pedestalSigma " << sig << " " << thePedestalSigma << std::endl;
   //-if( thePedestal != 0. ) {
   //-    sig += sqrt( sig*sig + val*val*thePedestalSigma*thePedestalSigma/thePedestal/thePedestal );
   //-}
   //---------- Add error in constant term
   sig = sqrt(sig * sig + theConstantTermSigma * theConstantTermSigma);
   //- std::cout << " sigma + costantTermSigma " << sig << " " << theConstantTermSigma << std::endl;
 
   //---------- Convert to rad
   //- std::cout << "FACTOR " << theFactor << "correct " << val << " "  << thePedestal << std::endl;
   val *= theFactor;
   //-------- Do not correct the sigma!!!!
   //-  sig /= theFactor;
   if (ALIUtils::debug >= 4)
     std::cout << "MeasurementTiltmeter::correctValueAndSigma: new value " << val << " +- " << sig << std::endl;
   setValue(0, val);
   setSigma(0, sig);
 }

◆ setConversionFactor()

void MeasurementTiltmeter::setConversionFactor ( const std::vector< ALIstring > & wordlist )

overridevirtual

Reimplemented from Measurement.

Definition at line 49 of file MeasurementTiltmeter.cc.

References DMR_cfg::cerr, ALIUtils::dumpVS(), beamvalidation::exit(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), ALIUtils::IsNumber(), Measurement::sigmaDimensionFactor(), theConstantTerm, theConstantTermSigma, theFactor, theFactorSigma, and Measurement::valueDimensionFactor().

                                                                                    {
   //--------- Check that the format is OK
   if (wordlist.size() == 1)
     return;
   if (wordlist.size() != 7 || !ALIUtils::IsNumber(wordlist[1]) || !ALIUtils::IsNumber(wordlist[3]) ||
       !ALIUtils::IsNumber(wordlist[4]) || !ALIUtils::IsNumber(wordlist[6]) || wordlist[2] != ALIstring("+-") ||
       wordlist[5] != ALIstring("+-")) {
     std::cerr << "!! Tiltmeter Measurement setConversionFactor: WRONG FORMAT " << std::endl
               << "It should be: TILTEMETER factor +- error constant_term +- error" << (wordlist.size() != 7)
               << !ALIUtils::IsNumber(wordlist[1]) << !ALIUtils::IsNumber(wordlist[3])
               << !ALIUtils::IsNumber(wordlist[4])
               << !ALIUtils::IsNumber(wordlist[6])
               //     << (wordlist[2] != ALIstring("+-")) << (wordlist[5] != ALIstring("+-"))
               << std::endl
               << "It is: ";
     ALIUtils::dumpVS(wordlist, " ", std::cerr);
     exit(1);
   }
   theFactor = atof(wordlist[1].c_str());
 
   //------ correct by dimension of value of tiltmeter
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   ALIint dimfac = ALIint(gomgr->GlobalOptions()[ALIstring("tiltmeter_meas_value_dimension")]);
   if (dimfac == 0) {
     theFactor *= 1.;
   } else if (dimfac == 1) {
     theFactor *= 1.E-3;
   } else if (dimfac == 2) {
     theFactor *= 1.E-6;
   } else {
     std::cerr
         << " !!!EXITING: error in global option tiltmeter_meas_value_dimension, it can only take values 0,1,2, not "
         << dimfac;
   }
   theFactorSigma = atof(wordlist[3].c_str());
   theConstantTerm = atof(wordlist[4].c_str()) * valueDimensionFactor();
   theConstantTermSigma = atof(wordlist[6].c_str()) * sigmaDimensionFactor();
   //-  std::cout << "correctVal  theConstantTerm" <<  theConstantTerm <<  valueDimensionFactor() << std::endl;
   //----- Change value and sigma to dimensions used in SDF, because constant term and pedestal are in dimensions of SDF
   //-  thePedestal = atof(wordlist[7].c_str()) * valueDimensionFactor();
   //-thePedestalSigma = atof(wordlist[9].c_str()) * sigmaDimensionFactor();
   //  std::cout << "reading thePedestalSigma " << thePedestalSigma  << "= " << wordlist[9] << std::endl;
   //  TILTMETER 458.84 +- 1.58  0. +- 0. 1 +- 0
 }

Member Data Documentation

◆ theConstantTerm

ALIdouble MeasurementTiltmeter::theConstantTerm

private

Definition at line 43 of file MeasurementTiltmeter.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

◆ theConstantTermSigma

ALIdouble MeasurementTiltmeter::theConstantTermSigma

private

Definition at line 44 of file MeasurementTiltmeter.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

◆ theFactor

ALIdouble MeasurementTiltmeter::theFactor

private

Definition at line 41 of file MeasurementTiltmeter.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

◆ theFactorSigma

ALIdouble MeasurementTiltmeter::theFactorSigma

private

Definition at line 42 of file MeasurementTiltmeter.h.

Referenced by setConversionFactor().

◆ thePedestal

ALIdouble MeasurementTiltmeter::thePedestal

private

Definition at line 45 of file MeasurementTiltmeter.h.

◆ thePedestalSigma

ALIdouble MeasurementTiltmeter::thePedestalSigma

private

Definition at line 46 of file MeasurementTiltmeter.h.

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MeasurementTiltmeter() [1/2]

◆ MeasurementTiltmeter() [2/2]

◆ ~MeasurementTiltmeter()

Member Function Documentation

◆ calculateSimulatedValue()

◆ correctValueAndSigma()

◆ setConversionFactor()

Member Data Documentation

◆ theConstantTerm

◆ theConstantTermSigma

◆ theFactor

◆ theFactorSigma

◆ thePedestal

◆ thePedestalSigma