DupFitTrkKiller.cc

Go to the documentation of this file.

#include "L1Trigger/TrackFindingTMTT/interface/DupFitTrkKiller.h"
#include "L1Trigger/TrackFindingTMTT/interface/Settings.h"
#include "L1Trigger/TrackFindingTMTT/interface/PrintL1trk.h"
#include "FWCore/Utilities/interface/Exception.h"
#include <map>

using namespace std;

namespace tmtt {

  //=== Make available cfg parameters & specify which algorithm is to be used for duplicate track removal.

  DupFitTrkKiller::DupFitTrkKiller(const Settings* settings)
      : settings_(settings), dupTrkAlg_(static_cast<DupAlgoName>(settings->dupTrkAlgFit())) {}

  //=== Eliminate duplicate tracks from the input collection, and so return a reduced list of tracks.

  list<const L1fittedTrack*> DupFitTrkKiller::filter(const list<L1fittedTrack>& vecTracks) const {
    if (dupTrkAlg_ == DupAlgoName::None) {
      // We are not running duplicate removal, so return original fitted track collection.
      list<const L1fittedTrack*> copyTracks;
      for (const L1fittedTrack& trk : vecTracks) {
        copyTracks.push_back(&trk);
      }
      return copyTracks;

    } else {
      // Choose which algorithm to run, based on parameter dupTrkAlg_.
      switch (dupTrkAlg_) {
        // Run filters that only work on fitted tracks.
        case DupAlgoName::Algo1:
          return filterAlg1(vecTracks);
          break;
        case DupAlgoName::Algo2:
          return filterAlg2(vecTracks);
          break;
        default:
          throw cms::Exception("BadConfig") << "KillDupTrks: Cfg option DupFitTrkAlg has invalid value.";
      }
    }
  }

  //=== Duplicate removal algorithm designed to run after the track helix fit, which eliminates duplicates
  //=== simply by requiring that the fitted (q/Pt, phi0) of the track correspond to the same HT cell in
  //=== which the track was originally found by the HT.
  //=== N.B. This code runs on tracks in a single sector. It could be extended to run on tracks in entire
  //=== tracker by adding the track's sector number to memory "htCellUsed" below.

  list<const L1fittedTrack*> DupFitTrkKiller::filterAlg1(const list<L1fittedTrack>& tracks) const {
    // Hard-wired options to play with.
    constexpr bool debug = false;
    constexpr bool doRecoveryStep = true;  // Do 2nd pass through rejected tracks to see if any should be rescued.
    constexpr bool reduceDups = true;      // Option attempting to reduce duplicate tracks during 2nd pass.
    constexpr bool memorizeAllHTcells =
        false;  // First pass stores in memory all cells that the HT found tracks in, not just those of tracks accepted by the first pass.
    constexpr bool doSectorCheck = false;  // Require fitted helix to lie within sector.
    constexpr bool usePtAndZ0Cuts = false;
    constexpr bool goOutsideArray = true;  // Also store in memory stubs outside the HT array during 2nd pass.
    constexpr bool limitDiff = true;       // Limit allowed diff. between HT & Fit cell to <= 1.

    if (debug && not tracks.empty())
      PrintL1trk() << "Start DupFitTrkKiller" << tracks.size();

    list<const L1fittedTrack*> tracksFiltered;

    // Make a first pass through the tracks, doing initial identification of duplicate tracks.
    // N.B. BY FILLING THIS WITH CELLS AROUND SELECTED TRACKS, RATHER THAN JUST THE CELL CONTAINING THE
    // TRACK, ONE CAN REDUCE THE DUPLICATE RATE FURTHER, AT COST TO EFFICIENCY.
    set<pair<unsigned int, unsigned int>> htCellUsed;
    list<const L1fittedTrack*> tracksRejected;

    // For checking if multiple tracks corresponding to same TP are accepted by duplicate removal.
    map<unsigned int, pair<unsigned int, unsigned int>> tpFound;
    map<unsigned int, unsigned int> tpFoundAtPass;

    for (const L1fittedTrack& trk : tracks) {
      // Only consider tracks whose fitted helix parameters are in the same sector as the HT originally used to find the track.
      if ((!doSectorCheck) || trk.consistentSector()) {
        if ((!usePtAndZ0Cuts) ||
            (std::abs(trk.z0()) < settings_->beamWindowZ() && trk.pt() > settings_->houghMinPt() - 0.2)) {
          // For debugging.
          [[clang::suppress]] const TP* tp = trk.matchedTP();

          // Check if this track's fitted (q/pt, phi0) helix parameters correspond to the same HT cell as the HT originally found the track in.
          bool consistentCell = trk.consistentHTcell();
          if (consistentCell) {
            // This track is probably not a duplicate, so keep & and store its HT cell location (which equals the HT cell corresponding to the fitted track).
            tracksFiltered.push_back(&trk);
            // Memorize HT cell location corresponding to this track (identical for HT track & fitted track).
            if (!memorizeAllHTcells) {
              pair<unsigned int, unsigned int> htCell = trk.cellLocationHT();
              htCellUsed.insert(htCell);
              if (trk.l1track3D()->mergedHTcell()) {
                // If this is a merged cell, block the other elements too, in case a track found by the HT in an unmerged cell
                // has a fitted cell there.
                pair<unsigned int, unsigned int> htCell10(htCell.first + 1, htCell.second);
                pair<unsigned int, unsigned int> htCell01(htCell.first, htCell.second + 1);
                pair<unsigned int, unsigned int> htCell11(htCell.first + 1, htCell.second + 1);
                htCellUsed.insert(htCell10);
                htCellUsed.insert(htCell01);
                htCellUsed.insert(htCell11);
              }
            }

            if (debug && tp != nullptr) {
              PrintL1trk() << "FIRST PASS: m=" << trk.cellLocationHT().first << "/" << trk.cellLocationFit().first
                           << " c=" << trk.cellLocationHT().second << "/" << trk.cellLocationFit().second
                           << " Delta(m,c)=(" << int(trk.cellLocationHT().first) - int(trk.cellLocationFit().first)
                           << "," << int(trk.cellLocationHT().second) - int(trk.cellLocationFit().second)
                           << ") pure=" << trk.purity() << " merged=" << trk.l1track3D()->mergedHTcell()
                           << " #layers=" << trk.l1track3D()->numLayers() << " tp=" << tp->index() << " dupCell=("
                           << tpFound[tp->index()].first << "," << tpFound[tp->index()].second
                           << ") dup=" << tpFoundAtPass[tp->index()];
              // If the following two variables are non-zero in printout, then track has already been found,
              // so we have mistakenly kept a duplicate.
              if (tpFound.find(tp->index()) != tpFound.end())
                tpFound[tp->index()] = trk.cellLocationFit();
              tpFoundAtPass[tp->index()] = 1;
            }

          } else {
            if (limitDiff) {
              const unsigned int maxDiff = 1;
              if (abs(int(trk.cellLocationHT().first) - int(trk.cellLocationFit().first)) <= int(maxDiff) &&
                  abs(int(trk.cellLocationHT().second) - int(trk.cellLocationFit().second)) <= int(maxDiff))
                tracksRejected.push_back(&trk);
            } else {
              tracksRejected.push_back(&trk);
            }

            if (debug && tp != nullptr) {
              PrintL1trk() << "FIRST REJECT: m=" << trk.cellLocationHT().first << "/" << trk.cellLocationFit().first
                           << " c=" << trk.cellLocationHT().second << "/" << trk.cellLocationFit().second
                           << " Delta(m,c)=(" << int(trk.cellLocationHT().first) - int(trk.cellLocationFit().first)
                           << "," << int(trk.cellLocationHT().second) - int(trk.cellLocationFit().second)
                           << ") pure=" << trk.purity() << " merged=" << trk.l1track3D()->mergedHTcell()
                           << " #layers=" << trk.l1track3D()->numLayers() << " tp=" << tp->index() << " dupCell=("
                           << tpFound[tp->index()].first << "," << tpFound[tp->index()].second
                           << ") dup=" << tpFoundAtPass[tp->index()];
            }
          }
          // Memorize HT cell location corresponding to this track, even if it was not accepted by first pass..
          if (memorizeAllHTcells) {
            pair<unsigned int, unsigned int> htCell =
                trk.cellLocationFit();  // Intentionally used fit instead of HT here.
            htCellUsed.insert(htCell);
            if (trk.l1track3D()->mergedHTcell()) {
              // If this is a merged cell, block the other elements too, in case a track found by the HT in an unmerged cell
              // has a fitted cell there.
              // N.B. NO GOOD REASON WHY "-1" IS NOT DONE HERE TOO. MIGHT REDUCE DUPLICATE RATE?
              pair<unsigned int, unsigned int> htCell10(htCell.first + 1, htCell.second);
              pair<unsigned int, unsigned int> htCell01(htCell.first, htCell.second + 1);
              pair<unsigned int, unsigned int> htCell11(htCell.first + 1, htCell.second + 1);
              htCellUsed.insert(htCell10);
              htCellUsed.insert(htCell01);
              htCellUsed.insert(htCell11);
            }
          }
        }
      }
    }

    if (doRecoveryStep) {
      // Making a second pass through the rejected tracks, checking if any should be rescued.
      for (const L1fittedTrack* trk : tracksRejected) {
        // Get location in HT array corresponding to fitted track helix parameters.
        pair<unsigned int, unsigned int> htCell = trk->cellLocationFit();
        // If this HT cell was not already memorized, rescue this track, since it is probably not a duplicate,
        // but just a track whose fitted helix parameters are a bit wierd for some reason.
        if (htCellUsed.count(htCell) == 0) {
          tracksFiltered.push_back(trk);  // Rescue track.
          // Optionally store cell location to avoid rescuing other tracks at the same location, which may be duplicates of this track.
          bool outsideCheck = (goOutsideArray || trk->pt() > settings_->houghMinPt());
          if (reduceDups && outsideCheck)
            htCellUsed.insert(htCell);

          // For debugging.
          [[clang::suppress]] const TP* tp = trk->matchedTP();

          if (debug && tp != nullptr) {
            PrintL1trk() << "SECOND PASS: m=" << trk->cellLocationHT().first << "/" << trk->cellLocationFit().first
                         << " c=" << trk->cellLocationHT().second << "/" << trk->cellLocationFit().second
                         << " Delta(m,c)=(" << int(trk->cellLocationHT().first) - int(trk->cellLocationFit().first)
                         << "," << int(trk->cellLocationHT().second) - int(trk->cellLocationFit().second)
                         << ") pure=" << trk->purity() << " merged=" << trk->l1track3D()->mergedHTcell()
                         << " #layers=" << trk->l1track3D()->numLayers() << " tp=" << tp->index() << " dupCell=("
                         << tpFound[tp->index()].first << "," << tpFound[tp->index()].second
                         << ") dup=" << tpFoundAtPass[tp->index()];
            if (tpFound.find(tp->index()) != tpFound.end())
              tpFound[tp->index()] = htCell;
            tpFoundAtPass[tp->index()] = 2;
          }
        }
      }
    }

    // Debug printout to identify duplicate tracks that survived.
    if (debug)
      this->printDuplicateTracks(tracksFiltered);

    return tracksFiltered;
  }

  //=== Duplicate removal algorithm designed to run after the track helix fit, which eliminates duplicates
  //=== simply by requiring that no two tracks should have fitted (q/Pt, phi0) that correspond to the same HT
  //=== cell. If they do, then only the first to arrive is kept.
  //=== N.B. This code runs on tracks in a single sector. It could be extended to run on tracks in entire
  //=== tracker by adding the track's sector number to memory "htCellUsed" below.

  list<const L1fittedTrack*> DupFitTrkKiller::filterAlg2(const list<L1fittedTrack>& tracks) const {
    // Hard-wired options to play with.
    const bool debug = false;

    if (debug && not tracks.empty())
      PrintL1trk() << "START " << tracks.size();

    list<const L1fittedTrack*> tracksFiltered;
    set<pair<unsigned int, unsigned int>> htCellUsed;

    for (const L1fittedTrack& trk : tracks) {
      // Get location in HT array corresponding to fitted track helix parameters.
      pair<unsigned int, unsigned int> htCell = trk.cellLocationFit();
      // If this HT cell was not already memorized, rescue this track, since it is probably not a duplicate,
      // but just a track whose fitted helix parameters are a bit wierd for some reason.
      if (htCellUsed.count(htCell) == 0) {
        tracksFiltered.push_back(&trk);  // Rescue track.
        // Store cell location to avoid rescuing other tracks at the same location, which may be duplicates of this track.
        htCellUsed.insert(htCell);
        if (debug) {
          const TP* tp = trk.matchedTP();
          int tpIndex = (tp != nullptr) ? tp->index() : -999;
          PrintL1trk() << "ALG51: m=" << trk.cellLocationHT().first << "/" << trk.cellLocationFit().first
                       << " c=" << trk.cellLocationHT().second << "/" << trk.cellLocationFit().second
                       << " tp=" << tpIndex << " pure=" << trk.purity();
        }
      }
    }

    // Debug printout to identify duplicate tracks that survived.
    if (debug)
      this->printDuplicateTracks(tracksFiltered);

    return tracksFiltered;
  }

  // Debug printout of which tracks are duplicates.
  void DupFitTrkKiller::printDuplicateTracks(const list<const L1fittedTrack*>& tracks) const {
    map<const TP*, list<const L1fittedTrack*>> tpMap;
    for (const L1fittedTrack* trk : tracks) {
      const TP* tp = trk->matchedTP();
      if (tp != nullptr) {
        tpMap[tp].push_back(trk);
      }
    }
    for (const auto& p : tpMap) {
      const TP* tp = p.first;
      const list<const L1fittedTrack*> vecTrk = p.second;
      if (vecTrk.size() > 1) {
        for (const L1fittedTrack* trk : vecTrk) {
          PrintL1trk() << "  MESS UP : m=" << trk->cellLocationHT().first << "/" << trk->cellLocationFit().first
                       << " c=" << trk->cellLocationHT().second << "/" << trk->cellLocationFit().second
                       << " tp=" << tp->index() << " tp_pt=" << tp->pt() << " fit_pt=" << trk->pt()
                       << " pure=" << trk->purity();
          PrintL1trk() << "     stubs = ";
          for (const Stub* s : trk->stubs())
            PrintL1trk() << s->index() << " ";
          PrintL1trk();
        }
      }
    }
    if (not tracks.empty())
      PrintL1trk() << "FOUND " << tracks.size();
  }

}  // namespace tmtt