Hardware and Physics Efficiency data structures and routines. More...

#include <CSCDQM_Summary.h>

Public Member Functions
const Detector	getDetector () const

const double	GetEfficiencyArea (const unsigned int station) const
	Get Efficiency area for the station. More...

const double	GetEfficiencyArea (const Address &adr) const
	Get Efficiency area for the address. More...

const double	GetEfficiencyHW () const
	Get efficiency of the whole detector. More...

const double	GetEfficiencyHW (const unsigned int station) const
	Get efficiency of the station. More...

const double	GetEfficiencyHW (Address adr) const
	Get efficiency of the detector part supplied by the address. More...

const HWStatusBitSet	GetValue (Address adr) const
	Get value of some address. More...

bool	isChamberStandby (unsigned int side, unsigned int station, unsigned int ring, unsigned int chamber) const
	Check if chamber is in standby? More...

bool	isChamberStandby (CSCDetId cid) const
	Check if chamber is in standby? More...

const int	IsPhysicsReady (const unsigned int px, const unsigned int py)
	Check if the current partition element (aka eta/phi polygon) has at least 2 active HW elements in the area. More...

void	ReadErrorChambers (const TH2 &evs, const TH2 &err, const HWStatusBit bit, const double eps_max=0.1, const double Sfail=5.0)
	Read Error data for Chambers. More...

void	ReadReportingChambers (const TH2 *&h2, const double threshold=1.0)
	Read Reporting Chamber histogram and fill in detector map. More...

void	ReadReportingChambersRef (const TH2 &h2, const TH2 &refh2, const double cold_coef=0.1, const double cold_Sfail=5.0, const double hot_coef=2.0, const double hot_Sfail=5.0)
	Read Reporting Chamber histogram and fill in detector map based on reference histogram. More...

void	Reset ()
	Resets all detector map. More...

void	ReSetValue (const HWStatusBit bit)
	ReSetValue for the whole of detector. More...

void	ReSetValue (const Address &adr, const HWStatusBit bit)
	ReSet value recursivelly by following the supplied address. More...

const unsigned int	setMaskedHWElements (std::vector< std::string > &tokens)
	Read HW element masks (strings), create Address and apply to detector map. More...

void	SetValue (const HWStatusBit bit, const int value=1)
	SetValue for the whole of detector. More...

void	SetValue (Address adr, const HWStatusBit bit, const int value=1)
	Set value recursivelly by following the supplied address. More...

	Summary ()
	Constructor. More...

void	Write (TH2 *&h2, const unsigned int station) const
	Write detector map to H1 histogram (linear data) for the selected adr.station. More...

void	WriteChamberState (TH2 *&h2, const int mask, const int value=1, const bool reset=true, const bool op_any=false) const
	Write State information to chamber histogram. More...

void	WriteMap (TH2 *&h2)
	Write PhysicsReady Map to H2 histogram. More...

	~Summary ()
	Destructor. More...

Private Member Functions
const bool	ChamberAddressToCoords (const Address &adr, unsigned int &x, unsigned int &y) const
	Calculate CSCChamberMap histogram coordinates from Address. More...

const bool	ChamberCoordsToAddress (const unsigned int x, const unsigned int y, Address &adr) const
	Calculate Address from CSCChamberMap histogram coordinates. More...

const double	GetReportingArea (Address adr) const
	Calculate the reporting area for the address. More...

Private Attributes
Detector	detector

HWStatusBitSet	map [2][4][3][36][6][5][5]

Detailed Description

Hardware and Physics Efficiency data structures and routines.

Definition at line 78 of file CSCDQM_Summary.h.

Constructor & Destructor Documentation

◆ Summary()

cscdqm::Summary::Summary ( )

Constructor.

Definition at line 26 of file CSCDQM_Summary.cc.

References Reset().

26 : detector(NTICS, NTICS) { Reset(); }

NTICS

#define NTICS

Definition: CSCDQM_Summary.h:38

cscdqm::Summary::Reset

void Reset()

Resets all detector map.

Definition: CSCDQM_Summary.cc:36

cscdqm::Summary::detector

Detector detector

Definition: CSCDQM_Summary.h:131

◆ ~Summary()

cscdqm::Summary::~Summary ( )

Destructor.

Definition at line 31 of file CSCDQM_Summary.cc.

31 {}

Member Function Documentation

◆ ChamberAddressToCoords()

const bool cscdqm::Summary::ChamberAddressToCoords	(	const Address &	adr,
		unsigned int &	x,
		unsigned int &	y
	)		const

private

Calculate CSCChamberMap histogram coordinates from Address.

Parameters

adr	Address
x	X coordinate of histogram to be returned
y	Y coordinate of histogram to be returned

Returns: true if coords filled, false - otherwise

Definition at line 874 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::chamber, cscdqm::Address::chamber, cscdqm::Address::mask, cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, cscdqm::Address::station, and x.

Referenced by WriteChamberState().

                                                                                                        {
     if (!adr.mask.side || !adr.mask.station || !adr.mask.ring || !adr.mask.chamber)
       return false;
 
     x = adr.chamber;
     y = 0;
 
     if (adr.side == 1) {
       switch (adr.station) {
         case 1:
           y = 10;
           if (adr.ring == 2)
             y = 11;
           if (adr.ring == 3)
             y = 12;
           break;
         case 2:
           y = 13;
           if (adr.ring == 2)
             y = 14;
           break;
         case 3:
           y = 15;
           if (adr.ring == 2)
             y = 16;
           break;
         case 4:
           y = 17;
           if (adr.ring == 2)
             y = 18;
           break;
       }
     } else if (adr.side == 2) {
       switch (adr.station) {
         case 1:
           y = 7;
           if (adr.ring == 2)
             y = 8;
           if (adr.ring == 1)
             y = 9;
           break;
         case 2:
           y = 5;
           if (adr.ring == 1)
             y = 6;
           break;
         case 3:
           y = 3;
           if (adr.ring == 1)
             y = 4;
           break;
         case 4:
           y = 1;
           if (adr.ring == 1)
             y = 2;
           break;
       }
     }
 
     return true;
   }

◆ ChamberCoordsToAddress()

const bool cscdqm::Summary::ChamberCoordsToAddress	(	const unsigned int	x,
		const unsigned int	y,
		Address &	adr
	)		const

private

Calculate Address from CSCChamberMap histogram coordinates.

Parameters

x	X coordinate of histogram
y	Y coordinate of histogram
adr	Address to be filled in and returned

Returns: true if address was found and filled, false - otherwise

Definition at line 821 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, cscdqm::Address::station, and x.

Referenced by ReadErrorChambers(), ReadReportingChambers(), and ReadReportingChambersRef().

                                                                                                            {
     if (x < 1 || x > 36 || y < 1 || y > 18)
       return false;
 
     adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = true;
     adr.mask.layer = adr.mask.cfeb = adr.mask.hv = false;
 
     if (y < 10)
       adr.side = 2;
     else
       adr.side = 1;
 
     adr.chamber = x;
 
     if (y == 1 || y == 18) {
       adr.station = 4;
       adr.ring = 2;
     } else if (y == 2 || y == 17) {
       adr.station = 4;
       adr.ring = 1;
     } else if (y == 3 || y == 16) {
       adr.station = 3;
       adr.ring = 2;
     } else if (y == 4 || y == 15) {
       adr.station = 3;
       adr.ring = 1;
     } else if (y == 5 || y == 14) {
       adr.station = 2;
       adr.ring = 2;
     } else if (y == 6 || y == 13) {
       adr.station = 2;
       adr.ring = 1;
     } else if (y == 7 || y == 12) {
       adr.station = 1;
       adr.ring = 3;
     } else if (y == 8 || y == 11) {
       adr.station = 1;
       adr.ring = 2;
     } else if (y == 9 || y == 10) {
       adr.station = 1;
       adr.ring = 1;
     }
 
     return true;
   }

◆ getDetector()

const Detector cscdqm::Summary::getDetector ( ) const

inline

Definition at line 85 of file CSCDQM_Summary.h.

References detector.

Referenced by cscdqm::EventProcessor::processCSC(), and cscdqm::EventProcessor::updateEfficiencyHistos().

85 { return detector; }

cscdqm::Summary::detector

Detector detector

Definition: CSCDQM_Summary.h:131

◆ GetEfficiencyArea() [1/2]

const double cscdqm::Summary::GetEfficiencyArea ( const unsigned int station ) const

Get Efficiency area for the station.

Parameters

station Station number 1..4

Returns: Reporting Area for the Station

Definition at line 609 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, N_STATIONS, cscdqm::AddressMask::ring, cscdqm::AddressMask::side, relativeConstraints::station, cscdqm::AddressMask::station, and cscdqm::Address::station.

                                                                           {
     if (station <= 0 || station > N_STATIONS)
       return 0.0;
 
     Address adr;
     bzero(&adr, sizeof(Address));
     adr.mask.side = adr.mask.ring = adr.mask.chamber = adr.mask.layer = adr.mask.cfeb = adr.mask.hv = false;
     adr.mask.station = true;
     adr.station = station;
 
     return GetEfficiencyArea(adr);
   }

◆ GetEfficiencyArea() [2/2]

const double cscdqm::Summary::GetEfficiencyArea ( const Address & adr ) const

Get Efficiency area for the address.

Parameters

adr Address

Returns: Area in eta/phi space

Definition at line 627 of file CSCDQM_Summary.cc.

References cscdqm::Detector::Area(), cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, detector, GetReportingArea(), cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, cscdqm::AddressMask::ring, cscdqm::AddressMask::side, cscdqm::AddressMask::station, and cscdqm::Address::station.

                                                                   {
     double all_area = 1;
 
     if ((adr.mask.side == false) && (adr.mask.ring == false) && (adr.mask.chamber == false) &&
         (adr.mask.layer == false) && (adr.mask.cfeb == false) && (adr.mask.hv == false) && (adr.mask.station == true))
       all_area = detector.Area(adr.station);
     else
       all_area = detector.Area(adr);
 
     double rep_area = GetReportingArea(adr);
     return rep_area / all_area;
   }

◆ GetEfficiencyHW() [1/3]

const double cscdqm::Summary::GetEfficiencyHW ( ) const

Get efficiency of the whole detector.

Returns: Detector efficiency rate (0..1)

Definition at line 512 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, cscdqm::AddressMask::ring, cscdqm::AddressMask::side, and cscdqm::AddressMask::station.

Referenced by GetEfficiencyHW(), and cscdqm::EventProcessor::updateEfficiencyHistos().

                                               {
     Address adr;
     bzero(&adr, sizeof(Address));
     adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = adr.mask.layer = adr.mask.cfeb = adr.mask.hv =
         false;
     return GetEfficiencyHW(adr);
   }

◆ GetEfficiencyHW() [2/3]

const double cscdqm::Summary::GetEfficiencyHW ( const unsigned int station ) const

Get efficiency of the station.

Parameters

station Station number

Returns: Detector efficiency rate (0..1)

Definition at line 525 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, GetEfficiencyHW(), cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, N_STATIONS, cscdqm::AddressMask::ring, cscdqm::AddressMask::side, relativeConstraints::station, cscdqm::AddressMask::station, and cscdqm::Address::station.

                                                                         {
     Address adr;
     bzero(&adr, sizeof(Address));
     adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = adr.mask.layer = adr.mask.cfeb = adr.mask.hv =
         false;
 
     if (station > 0 && station <= N_STATIONS) {
       adr.mask.station = true;
       adr.station = station;
     } else {
       return 0.0;
     }
 
     return GetEfficiencyHW(adr);
   }

◆ GetEfficiencyHW() [3/3]

const double cscdqm::Summary::GetEfficiencyHW ( Address adr ) const

Get efficiency of the detector part supplied by the address.

Parameters

adr	Address to watch efficiency for

Returns: Subdetector efficiency rate (0..1)

if not error - then OK!

Definition at line 546 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, detector, GetEfficiencyHW(), GetValue(), cscdqm::AddressMask::hv, cscdqm::Address::hv, HWSTATUSANYERROR, cscdqm::AddressMask::layer, cscdqm::Address::layer, cscdqm::Address::mask, N_LAYERS, N_SIDES, N_STATIONS, cscdqm::Detector::NumberOfChamberCFEBs(), cscdqm::Detector::NumberOfChamberHVs(), cscdqm::Detector::NumberOfChambers(), cscdqm::Detector::NumberOfRings(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, cscdqm::Address::station, and mps_update::status.

                                                          {
     double sum = 0.0;
     if (!adr.mask.side) {
       adr.mask.side = true;
       for (adr.side = 1; adr.side <= N_SIDES; adr.side++)
         sum += GetEfficiencyHW(adr);
       return sum / N_SIDES;
     }
 
     if (!adr.mask.station) {
       adr.mask.station = true;
       for (adr.station = 1; adr.station <= N_STATIONS; adr.station++)
         sum += GetEfficiencyHW(adr);
       return sum / N_STATIONS;
     }
 
     if (!adr.mask.ring) {
       adr.mask.ring = true;
       for (adr.ring = 1; adr.ring <= detector.NumberOfRings(adr.station); adr.ring++)
         sum += GetEfficiencyHW(adr);
       return sum / detector.NumberOfRings(adr.station);
     }
 
     if (!adr.mask.chamber) {
       adr.mask.chamber = true;
       for (adr.chamber = 1; adr.chamber <= detector.NumberOfChambers(adr.station, adr.ring); adr.chamber++)
         sum += GetEfficiencyHW(adr);
       return sum / detector.NumberOfChambers(adr.station, adr.ring);
     }
 
     if (!adr.mask.layer) {
       adr.mask.layer = true;
       for (adr.layer = 1; adr.layer <= N_LAYERS; adr.layer++)
         sum += GetEfficiencyHW(adr);
       return sum / N_LAYERS;
     }
 
     if (!adr.mask.cfeb) {
       adr.mask.cfeb = true;
       for (adr.cfeb = 1; adr.cfeb <= detector.NumberOfChamberCFEBs(adr.station, adr.ring); adr.cfeb++)
         sum += GetEfficiencyHW(adr);
       return sum / detector.NumberOfChamberCFEBs(adr.station, adr.ring);
     }
 
     if (!adr.mask.hv) {
       adr.mask.hv = true;
       for (adr.hv = 1; adr.hv <= detector.NumberOfChamberHVs(adr.station, adr.ring); adr.hv++)
         sum += GetEfficiencyHW(adr);
       return sum / detector.NumberOfChamberHVs(adr.station, adr.ring);
     }
 
     HWStatusBitSet status = GetValue(adr);
     if (HWSTATUSANYERROR(status))
       return 0.0;
     return 1.0;
   }

◆ GetReportingArea()

const double cscdqm::Summary::GetReportingArea ( Address adr ) const

private

Calculate the reporting area for the address.

Parameters

adr	Address to calculate

Returns: Area in eta/phi space

NOT errorous!

Definition at line 645 of file CSCDQM_Summary.cc.

References cscdqm::Detector::Area(), cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, detector, GetValue(), cscdqm::AddressMask::hv, cscdqm::Address::hv, HWSTATUSANYERROR, cscdqm::AddressMask::layer, cscdqm::Address::mask, N_SIDES, N_STATIONS, cscdqm::Detector::NumberOfChamberCFEBs(), cscdqm::Detector::NumberOfChamberHVs(), cscdqm::Detector::NumberOfChambers(), cscdqm::Detector::NumberOfRings(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, cscdqm::Address::station, and mps_update::status.

Referenced by GetEfficiencyArea().

                                                           {
     double sum = 0.0;
     if (!adr.mask.side) {
       adr.mask.side = true;
       for (adr.side = 1; adr.side <= N_SIDES; adr.side++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     if (!adr.mask.station) {
       adr.mask.station = true;
       for (adr.station = 1; adr.station <= N_STATIONS; adr.station++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     if (!adr.mask.ring) {
       adr.mask.ring = true;
       for (adr.ring = 1; adr.ring <= detector.NumberOfRings(adr.station); adr.ring++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     if (!adr.mask.chamber) {
       adr.mask.chamber = true;
       for (adr.chamber = 1; adr.chamber <= detector.NumberOfChambers(adr.station, adr.ring); adr.chamber++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     if (!adr.mask.cfeb) {
       adr.mask.cfeb = true;
       for (adr.cfeb = 1; adr.cfeb <= detector.NumberOfChamberCFEBs(adr.station, adr.ring); adr.cfeb++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     if (!adr.mask.hv) {
       adr.mask.hv = true;
       for (adr.hv = 1; adr.hv <= detector.NumberOfChamberHVs(adr.station, adr.ring); adr.hv++)
         sum += GetReportingArea(adr);
       return sum;
     }
 
     adr.mask.layer = false;
 
     HWStatusBitSet status = GetValue(adr);
     if (!HWSTATUSANYERROR(status)) {
       return detector.Area(adr);
     }
     return 0.0;
   }

◆ GetValue()

const HWStatusBitSet cscdqm::Summary::GetValue ( Address adr ) const

Get value of some address.

Parameters

adr	Address of atomic element to return value from

Returns: Value of the requested element

Definition at line 739 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, detector, cscdqm::AddressMask::hv, cscdqm::Address::hv, cscdqm::AddressMask::layer, cscdqm::Address::layer, map, cscdqm::Address::mask, N_LAYERS, N_SIDES, N_STATIONS, cscdqm::Detector::NumberOfChamberCFEBs(), cscdqm::Detector::NumberOfChamberHVs(), cscdqm::Detector::NumberOfChambers(), cscdqm::Detector::NumberOfRings(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, and cscdqm::Address::station.

Referenced by GetEfficiencyHW(), GetReportingArea(), isChamberStandby(), IsPhysicsReady(), Write(), and WriteChamberState().

                                                           {
     HWStatusBitSet state;
     state.reset();
 
     if (!adr.mask.side) {
       adr.mask.side = true;
       for (adr.side = 1; adr.side <= N_SIDES; adr.side++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.station) {
       adr.mask.station = true;
       for (adr.station = 1; adr.station <= N_STATIONS; adr.station++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.ring) {
       adr.mask.ring = true;
       for (adr.ring = 1; adr.ring <= detector.NumberOfRings(adr.station); adr.ring++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.chamber) {
       adr.mask.chamber = true;
       for (adr.chamber = 1; adr.chamber <= detector.NumberOfChambers(adr.station, adr.ring); adr.chamber++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.layer) {
       adr.mask.layer = true;
       for (adr.layer = 1; adr.layer <= N_LAYERS; adr.layer++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.cfeb) {
       adr.mask.cfeb = true;
       for (adr.cfeb = 1; adr.cfeb <= detector.NumberOfChamberCFEBs(adr.station, adr.ring); adr.cfeb++)
         state |= GetValue(adr);
       return state;
     }
 
     if (!adr.mask.hv) {
       adr.mask.hv = true;
       for (adr.hv = 1; adr.hv <= detector.NumberOfChamberHVs(adr.station, adr.ring); adr.hv++)
         state |= GetValue(adr);
       return state;
     }
 
     return map[adr.side - 1][adr.station - 1][adr.ring - 1][adr.chamber - 1][adr.layer - 1][adr.cfeb - 1][adr.hv - 1];
   }

◆ isChamberStandby() [1/2]

bool cscdqm::Summary::isChamberStandby	(	unsigned int	side,
		unsigned int	station,
		unsigned int	ring,
		unsigned int	chamber
	)		const

Check if chamber is in standby?

Parameters

side	Side
station	Station
ring	Ring
chamber	Chamber

Returns: true if chamber is in standby, false - otherwise

Definition at line 707 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, relativeConstraints::chamber, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, GetValue(), cscdqm::AddressMask::hv, HWSTATUSANY, cscdqm::AddressMask::layer, cscdqm::Address::mask, relativeConstraints::ring, cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, relativeConstraints::station, cscdqm::AddressMask::station, and cscdqm::Address::station.

Referenced by isChamberStandby(), and cscdqm::EventProcessor::processCSC().

                                                              {
     Address adr;
     bzero(&adr, sizeof(Address));
     adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = true;
     adr.mask.layer = adr.mask.cfeb = adr.mask.hv = false;
     adr.side = side;
     adr.station = station;
     adr.ring = ring;
     adr.chamber = chamber;
 
     //std::cout << adr << " = " << HWSTATUSANY(GetValue(adr), 0x1000) << "\n";
 
     return HWSTATUSANY(GetValue(adr), 0x1000);
   }

◆ isChamberStandby() [2/2]

bool cscdqm::Summary::isChamberStandby ( CSCDetId cid ) const

Check if chamber is in standby?

Parameters

cid	Chamber identifier

Returns: true if chamber is in standby, false - otherwise

Definition at line 730 of file CSCDQM_Summary.cc.

References CSCDetId::chamber(), CSCDetId::endcap(), isChamberStandby(), CSCDetId::ring(), and CSCDetId::station().

                                                    {
     return isChamberStandby(cid.endcap(), cid.station(), cid.ring(), cid.chamber());
   }

◆ IsPhysicsReady()

const int cscdqm::Summary::IsPhysicsReady	(	const unsigned int	px,
		const unsigned int	py
	)

Check if the current partition element (aka eta/phi polygon) has at least 2 active HW elements in the area.

Parameters

px	partition element index in x axis
py	partition element index in y axis

Returns: 1 if this polygon is ok for physics and reporting, 0 - if it is ok but does not report, -1 - otherwise

If at least 2 stations with data and without errors = OK

Else, if at least one station errorous = ERROR

Else, if at least one station masked = MASKED
Else, not sufficient data = OK

Definition at line 473 of file CSCDQM_Summary.cc.

References cscdqm::AddressBox::adr, cscdqm::DATA, detector, GetValue(), HWSTATUSANYERROR, mps_fire::i, cscdqm::MASKED, N_STATIONS, cscdqm::Detector::NextAddressBoxByPartition(), multPhiCorr_741_25nsDY_cfi::px, multPhiCorr_741_25nsDY_cfi::py, cscdqm::Address::station, mps_update::status, and ctpps_dqm_sourceclient-live_cfg::test.

Referenced by WriteMap().

                                                                                 {
     AddressBox* box;
 
     HWStatusBitSet status[N_STATIONS];
 
     unsigned int i = 0;
     while (detector.NextAddressBoxByPartition(i, px, py, box)) {
       status[box->adr.station - 1] |= GetValue(box->adr);
     }
 
     unsigned int cdata = 0, cerror = 0, cmask = 0;
     for (unsigned int i = 0; i < N_STATIONS; i++) {
       if (HWSTATUSANYERROR(status[i])) {
         cerror++;
       } else {
         if (status[i].test(MASKED))
           cmask++;
         if (status[i].test(DATA))
           cdata++;
       }
     }
 
     if (cdata > 1)
       return 1;
     if (cerror > 0)
       return -1;
     if (cmask > 0)
       return 2;
     return 0;
   }

◆ ReadErrorChambers()

void cscdqm::Summary::ReadErrorChambers	(	const TH2 *&	evs,
		const TH2 *&	err,
		const HWStatusBit	bit,
		const double	eps_max = `0.1`,
		const double	Sfail = `5.0`
	)

Read Error data for Chambers.

Parameters

evs	Histogram for number of events (total)
err	Histogram for number of errors
bit	Error bit to set
eps_max	Maximum tolerance of errors (rate)
Sfail	Significance threshold for failure report

Definition at line 197 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, ChamberCoordsToAddress(), cscdqm::Utility::checkError(), submitPVResolutionJobs::err, createfilelist::int, LOG_WARN, N, dqmiodumpmetadata::n, ReSetValue(), SetValue(), and x.

Referenced by cscdqm::EventProcessor::updateEfficiencyHistos().

                                                                                                          {
     if (evs->GetXaxis()->GetXmin() <= 1 && evs->GetXaxis()->GetXmax() >= 36 && evs->GetYaxis()->GetXmin() <= 1 &&
         evs->GetYaxis()->GetXmax() >= 18 && err->GetXaxis()->GetXmin() <= 1 && err->GetXaxis()->GetXmax() >= 36 &&
         err->GetYaxis()->GetXmin() <= 1 && err->GetYaxis()->GetXmax() >= 18) {
       Address adr;
       bzero(&adr, sizeof(Address));
       unsigned int N = 0, n = 0;
 
       for (unsigned int x = 1; x <= 36; x++) {
         for (unsigned int y = 1; y <= 18; y++) {
           N = int(evs->GetBinContent(x, y));
           n = int(err->GetBinContent(x, y));
           if (ChamberCoordsToAddress(x, y, adr)) {
             if (Utility::checkError(N, n, eps_max, Sfail)) {
               SetValue(adr, bit);
             } else {
               ReSetValue(adr, bit);
             }
           }
         }
       }
     } else {
       LOG_WARN << "cscdqm::Summary.ReadErrorChambers routine. Wrong histogram dimensions!";
     }
   }

◆ ReadReportingChambers()

void cscdqm::Summary::ReadReportingChambers	(	const TH2 *&	h2,
		const double	threshold = `1.0`
	)

Read Reporting Chamber histogram and fill in detector map.

Parameters

h2	Histogram to read
threshold	Min bin value to set HW element as reporting

Definition at line 61 of file CSCDQM_Summary.cc.

References ChamberCoordsToAddress(), cscdqm::DATA, LOG_WARN, ReSetValue(), SetValue(), remoteMonitoring_LASER_era2018_cfg::threshold, and x.

Referenced by cscdqm::EventProcessor::updateEfficiencyHistos().

                                                                             {
     if (h2->GetXaxis()->GetXmin() <= 1 && h2->GetXaxis()->GetXmax() >= 36 && h2->GetYaxis()->GetXmin() <= 1 &&
         h2->GetYaxis()->GetXmax() >= 18) {
       Address adr;
       bzero(&adr, sizeof(Address));
       double z = 0.0;
 
       for (unsigned int x = 1; x <= 36; x++) {
         for (unsigned int y = 1; y <= 18; y++) {
           z = h2->GetBinContent(x, y);
           if (ChamberCoordsToAddress(x, y, adr)) {
             if (z >= threshold) {
               SetValue(adr, DATA);
             } else {
               ReSetValue(adr, DATA);
             }
           }
         }
       }
     } else {
       LOG_WARN << "cscdqm::Summary.ReadReportingChambers routine. Wrong histogram dimensions!";
     }
   }

◆ ReadReportingChambersRef()

void cscdqm::Summary::ReadReportingChambersRef	(	const TH2 *&	h2,
		const TH2 *&	refh2,
		const double	cold_coef = `0.1`,
		const double	cold_Sfail = `5.0`,
		const double	hot_coef = `2.0`,
		const double	hot_Sfail = `5.0`
	)

Read Reporting Chamber histogram and fill in detector map based on reference histogram.

Parameters

h2	Histogram to read
refh2	Reference histogram of hit occupancies
cold_coef	Minimum tolerance of difference (rate) to set COLD (not reporting) HW element
cold_Sfail	Significance threshold for COLD HW element
hot_coef	Minimum tolerance of difference (rate) to set HOT HW element
hot_Sfail	Significance threshold for HOT HW element

Rate Factor calculation
Reset some bits

Definition at line 95 of file CSCDQM_Summary.cc.

References ChamberCoordsToAddress(), cscdqm::Utility::checkOccupancy(), cscdqm::COLD, cscdqm::DATA, DQMScaleToClient_cfi::factor, cscdqm::HOT, createfilelist::int, LOG_WARN, N, dqmiodumpmetadata::n, EgammaValidation_cff::num, funct::pow(), ReSetValue(), SetValue(), and x.

Referenced by cscdqm::EventProcessor::updateEfficiencyHistos().

                                                                  {
     if (h2->GetXaxis()->GetXmin() <= 1 && h2->GetXaxis()->GetXmax() >= 36 && h2->GetYaxis()->GetXmin() <= 1 &&
         h2->GetYaxis()->GetXmax() >= 18 && refh2->GetXaxis()->GetXmin() <= 1 && refh2->GetXaxis()->GetXmax() >= 36 &&
         refh2->GetYaxis()->GetXmin() <= 1 && refh2->GetYaxis()->GetXmax() >= 18) {
       double num = 1.0, denum = 1.0;
       for (unsigned int x = 1; x <= 36; x++) {
         for (unsigned int y = 1; y <= 18; y++) {
           double Nij = h2->GetBinContent(x, y);
           double Nrefij = refh2->GetBinContent(x, y);
           if (Nij > 0) {
             num += Nrefij;
             denum += pow(Nrefij, 2.0) / Nij;
           }
         }
       }
       double factor = num / denum;
 
       Address adr;
       bzero(&adr, sizeof(Address));
       unsigned int N = 0, n = 0;
 
       for (unsigned int x = 1; x <= 36; x++) {
         for (unsigned int y = 1; y <= 18; y++) {
           N = int(refh2->GetBinContent(x, y) * factor);
           n = int(h2->GetBinContent(x, y));
 
           if (ChamberCoordsToAddress(x, y, adr)) {
             ReSetValue(adr, HOT);
             ReSetValue(adr, COLD);
 
             if (n == 0) {
               ReSetValue(adr, DATA);
             } else {
               SetValue(adr, DATA);
             }
 
             switch (Utility::checkOccupancy(N, n, cold_coef, hot_coef, cold_Sfail, hot_Sfail)) {
               case -1:
                 SetValue(adr, COLD);
 
                 /*
             std::cout << "adr = " << detector.AddressName(adr);
             std::cout << ", x = " << x << ", y = " << y;
             std::cout << ", value = " << GetValue(adr);
             std::cout << ", refh2 = " << refh2->GetBinContent(x, y);
             std::cout << ", factor = " << factor;
             std::cout << ", N = " << N;
             std::cout << ", n = " << n;
             std::cout << ", num = " << num;
             std::cout << ", denum = " << denum;
             std::cout << ", rate = " << (N > 0 ? n / N : 0);
             std::cout << ", cold_coef = " << cold_coef;
             std::cout << ", = COLD";
             std::cout << "\n";
               */
 
                 break;
               case 1:
                 SetValue(adr, HOT);
 
                 /*
             std::cout << "adr = " << detector.AddressName(adr);
             std::cout << ", x = " << x << ", y = " << y;
             std::cout << ", value = " << GetValue(adr);
             std::cout << ", refh2 = " << refh2->GetBinContent(x, y);
             std::cout << ", factor = " << factor;
             std::cout << ", N = " << N;
             std::cout << ", n = " << n;
             std::cout << ", num = " << num;
             std::cout << ", denum = " << denum;
             std::cout << ", rate = " << (N > 0 ? n / N : 0);
             std::cout << ", hot_coef = " << hot_coef;
             std::cout << ", = HOT";
             std::cout << "\n";
               */
 
                 break;
             };
           }
         }
       }
 
     } else {
       LOG_WARN << "cscdqm::Summary.ReadReportingChambersRef routine. Wrong histogram dimensions!";
     }
   }

◆ Reset()

void cscdqm::Summary::Reset ( )

Resets all detector map.

Setting Zeros (no data) for each HW element (and beyond)

Definition at line 36 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, cscdqm::AddressMask::hv, cscdqm::Address::hv, HWSTATUSBITSETSIZE, cscdqm::AddressMask::layer, cscdqm::Address::mask, N_CFEBS, N_CHAMBERS, N_HVS, N_RINGS, ReSetValue(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, and cscdqm::AddressMask::station.

Referenced by Summary().

                       {
     Address adr;
     bzero(&adr, sizeof(Address));
 
     adr.mask.side = adr.mask.station = adr.mask.layer = false;
     adr.mask.ring = adr.mask.chamber = adr.mask.cfeb = adr.mask.hv = true;
     for (adr.ring = 1; adr.ring <= N_RINGS; adr.ring++) {
       for (adr.chamber = 1; adr.chamber <= N_CHAMBERS; adr.chamber++) {
         for (adr.cfeb = 1; adr.cfeb <= N_CFEBS; adr.cfeb++) {
           for (adr.hv = 1; adr.hv <= N_HVS; adr.hv++) {
             for (unsigned int bit = 0; bit < HWSTATUSBITSETSIZE; bit++) {
               ReSetValue(adr, (HWStatusBit)bit);
             }
           }
         }
       }
     }
   }

◆ ReSetValue() [1/2]

void cscdqm::Summary::ReSetValue ( const HWStatusBit bit )

ReSetValue for the whole of detector.

Parameters

bit	Status bit to set

Definition at line 379 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, and SetValue().

Referenced by ReadErrorChambers(), ReadReportingChambers(), ReadReportingChambersRef(), and Reset().

379 { SetValue(bit, 0); }

cscdqm::Summary::SetValue

void SetValue(const HWStatusBit bit, const int value=1)

SetValue for the whole of detector.

Definition: CSCDQM_Summary.cc:393

triggerObjects_cff.bit

bit

Definition: triggerObjects_cff.py:266

◆ ReSetValue() [2/2]

void cscdqm::Summary::ReSetValue	(	const Address &	adr,
		const HWStatusBit	bit
	)

ReSet value recursivelly by following the supplied address.

Parameters

adr	Address to be updated
bit	Status bit to set

Definition at line 386 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, and SetValue().

386 { SetValue(adr, bit, 0); }

cscdqm::Summary::SetValue

void SetValue(const HWStatusBit bit, const int value=1)

SetValue for the whole of detector.

Definition: CSCDQM_Summary.cc:393

triggerObjects_cff.bit

bit

Definition: triggerObjects_cff.py:266

◆ setMaskedHWElements()

const unsigned int cscdqm::Summary::setMaskedHWElements ( std::vector< std::string > & tokens )

Read HW element masks (strings), create Address and apply to detector map.

Parameters

tokens Vector of mask strings

Returns: number of read and applied masks

Definition at line 800 of file CSCDQM_Summary.cc.

References cscdqm::Detector::AddressFromString(), detector, cscdqm::MASKED, SetValue(), AlCaHLTBitMon_QueryRunRegistry::string, and unpackBuffers-CaloStage2::token.

Referenced by cscdqm::EventProcessor::maskHWElements().

                                                                               {
     unsigned int applied = 0;
 
     for (unsigned int r = 0; r < tokens.size(); r++) {
       std::string token = (std::string)tokens.at(r);
       Address adr;
       if (detector.AddressFromString(token, adr)) {
         SetValue(adr, MASKED);
         applied++;
       }
     }
     return applied;
   }

◆ SetValue() [1/2]

void cscdqm::Summary::SetValue	(	const HWStatusBit	bit,
		const int	value = `1`
	)

SetValue for the whole of detector.

Parameters

bit	Status bit to set
value	Value to set

Definition at line 393 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, cscdqm::AddressMask::hv, cscdqm::AddressMask::layer, cscdqm::Address::mask, cscdqm::AddressMask::ring, cscdqm::AddressMask::side, and cscdqm::AddressMask::station.

Referenced by ReadErrorChambers(), ReadReportingChambers(), ReadReportingChambersRef(), ReSetValue(), setMaskedHWElements(), SetValue(), and cscdqm::EventProcessor::standbyEfficiencyHistos().

                                                                {
     Address adr;
     bzero(&adr, sizeof(Address));
     adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = adr.mask.layer = adr.mask.cfeb = adr.mask.hv =
         false;
     SetValue(adr, bit, value);
   }

◆ SetValue() [2/2]

void cscdqm::Summary::SetValue	(	Address	adr,
		const HWStatusBit	bit,
		const int	value = `1`
	)

Set value recursivelly by following the supplied address.

Parameters

adr	Address to be updated
bit	Status bit to set
value	Value to be set

Definition at line 407 of file CSCDQM_Summary.cc.

References triggerObjects_cff::bit, cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, detector, cscdqm::AddressMask::hv, cscdqm::Address::hv, cscdqm::AddressMask::layer, cscdqm::Address::layer, map, cscdqm::Address::mask, N_CFEBS, N_CHAMBERS, N_HVS, N_LAYERS, N_RINGS, N_SIDES, N_STATIONS, cscdqm::Detector::NumberOfChamberCFEBs(), cscdqm::Detector::NumberOfChamberHVs(), cscdqm::Detector::NumberOfChambers(), cscdqm::Detector::NumberOfRings(), cscdqm::AddressMask::ring, cscdqm::Address::ring, SetValue(), cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, and cscdqm::Address::station.

                                                                             {
     if (!adr.mask.side) {
       adr.mask.side = true;
       for (adr.side = 1; adr.side <= N_SIDES; adr.side++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.station) {
       adr.mask.station = true;
       for (adr.station = 1; adr.station <= N_STATIONS; adr.station++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.ring) {
       adr.mask.ring = true;
       for (adr.ring = 1; adr.ring <= detector.NumberOfRings(adr.station); adr.ring++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.chamber) {
       adr.mask.chamber = true;
       for (adr.chamber = 1; adr.chamber <= detector.NumberOfChambers(adr.station, adr.ring); adr.chamber++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.layer) {
       adr.mask.layer = true;
       for (adr.layer = 1; adr.layer <= N_LAYERS; adr.layer++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.cfeb) {
       adr.mask.cfeb = true;
       for (adr.cfeb = 1; adr.cfeb <= detector.NumberOfChamberCFEBs(adr.station, adr.ring); adr.cfeb++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (!adr.mask.hv) {
       adr.mask.hv = true;
       for (adr.hv = 1; adr.hv <= detector.NumberOfChamberHVs(adr.station, adr.ring); adr.hv++)
         SetValue(adr, bit, value);
       return;
     }
 
     if (adr.side > 0 && adr.side <= N_SIDES && adr.station > 0 && adr.station <= N_STATIONS && adr.ring > 0 &&
         adr.ring <= N_RINGS && adr.chamber > 0 && adr.chamber <= N_CHAMBERS && adr.layer > 0 && adr.layer <= N_LAYERS &&
         adr.cfeb > 0 && adr.cfeb <= N_CFEBS && adr.hv > 0 && adr.hv <= N_HVS) {
       map[adr.side - 1][adr.station - 1][adr.ring - 1][adr.chamber - 1][adr.layer - 1][adr.cfeb - 1][adr.hv - 1].set(
           bit, value);
     }
   }

◆ Write()

void cscdqm::Summary::Write	(	TH2 *&	h2,
		const unsigned int	station
	)		const

Write detector map to H1 histogram (linear data) for the selected adr.station.

Parameters

h2	Histogram to write data to
station	station number (1-4) to write data for

Definition at line 229 of file CSCDQM_Summary.cc.

References cscdqm::AddressBox::adr, cscdqm::AddressMask::cfeb, cscdqm::Address::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, cscdqm::DATA, detector, GetValue(), cscdqm::AddressMask::hv, cscdqm::Address::hv, HWSTATUSANYERROR, mps_fire::i, cscdqm::AddressMask::layer, cscdqm::Address::mask, cscdqm::MASKED, N_STATIONS, cscdqm::Detector::NextAddressBox(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, relativeConstraints::station, cscdqm::AddressMask::station, cscdqm::Address::station, mps_update::status, runGCPTkAlMap::title, x, cscdqm::AddressBox::xmax, cscdqm::AddressBox::xmin, cscdqm::AddressBox::ymax, and cscdqm::AddressBox::ymin.

Referenced by cscdqm::EventProcessor::updateEfficiencyHistos().

                                                                 {
     const AddressBox* box;
     Address adr, tadr;
     bzero(&adr, sizeof(Address));
     bzero(&tadr, sizeof(Address));
     float area_all = 0.0, area_rep = 0.0;
 
     if (station < 1 || station > N_STATIONS)
       return;
 
     adr.mask.side = adr.mask.ring = adr.mask.chamber = adr.mask.layer = adr.mask.cfeb = adr.mask.hv = false;
     adr.mask.station = true;
     adr.station = station;
 
     unsigned int i = 0;
 
     while (detector.NextAddressBox(i, box, adr)) {
       unsigned int x = 1 + (box->adr.side - 1) * 9 + (box->adr.ring - 1) * 3 + (box->adr.hv - 1);
       unsigned int y = 1 + (box->adr.chamber - 1) * 5 + (box->adr.cfeb - 1);
 
       tadr = box->adr;
       HWStatusBitSet status = GetValue(tadr);
 
       float area_box = fabs((box->xmax - box->xmin) * (box->ymax - box->ymin));
 
       if (status.test(MASKED)) {
         h2->SetBinContent(x, y, 2.0);
       } else {
         area_all += area_box;
         if (HWSTATUSANYERROR(status)) {
           h2->SetBinContent(x, y, -1.0);
         } else {
           area_rep += area_box;
           if (status.test(DATA)) {
             h2->SetBinContent(x, y, 1.0);
           } else {
             h2->SetBinContent(x, y, 0.0);
           }
         }
       }
     }
 
     TString title = Form("ME%d Status: Physics Efficiency %.2f%%", station, (area_rep / area_all) * 100.0);
     h2->SetTitle(title);
   }

◆ WriteChamberState()

void cscdqm::Summary::WriteChamberState	(	TH2 *&	h2,
		const int	mask,
		const int	value = `1`,
		const bool	reset = `true`,
		const bool	op_any = `false`
	)		const

Write State information to chamber histogram.

Parameters

h2	histogram to write to
mask	mask of errors to check while writing
value	to write to if state fits mask
reset	should all chamber states be reseted to 0 prior writing?
op_any	Should chamber be marked as errorous on any bit in mask? false - for all.

Definition at line 339 of file CSCDQM_Summary.cc.

References cscdqm::AddressMask::cfeb, cscdqm::AddressMask::chamber, cscdqm::Address::chamber, ChamberAddressToCoords(), detector, GetValue(), cscdqm::AddressMask::hv, HWSTATUSANY, HWSTATUSEQUALS, cscdqm::AddressMask::layer, LOG_WARN, gpuClustering::pixelStatus::mask, cscdqm::Address::mask, N_SIDES, N_STATIONS, cscdqm::Detector::NumberOfChambers(), cscdqm::Detector::NumberOfRings(), reset(), cscdqm::AddressMask::ring, cscdqm::Address::ring, cscdqm::AddressMask::side, cscdqm::Address::side, cscdqm::AddressMask::station, cscdqm::Address::station, and x.

Referenced by cscdqm::EventProcessor::standbyEfficiencyHistos(), and cscdqm::EventProcessor::writeShifterHistograms().

                                                                                                                       {
     if (h2->GetXaxis()->GetXmin() <= 1 && h2->GetXaxis()->GetXmax() >= 36 && h2->GetYaxis()->GetXmin() <= 1 &&
         h2->GetYaxis()->GetXmax() >= 18) {
       unsigned int x, y;
       Address adr;
       bzero(&adr, sizeof(Address));
 
       adr.mask.side = adr.mask.station = adr.mask.ring = adr.mask.chamber = true;
       adr.mask.layer = adr.mask.cfeb = adr.mask.hv = false;
 
       for (adr.side = 1; adr.side <= N_SIDES; adr.side++) {
         for (adr.station = 1; adr.station <= N_STATIONS; adr.station++) {
           for (adr.ring = 1; adr.ring <= detector.NumberOfRings(adr.station); adr.ring++) {
             for (adr.chamber = 1; adr.chamber <= detector.NumberOfChambers(adr.station, adr.ring); adr.chamber++) {
               if (ChamberAddressToCoords(adr, x, y)) {
                 HWStatusBitSet hwValue = GetValue(adr);
                 bool hit = (op_any ? HWSTATUSANY(hwValue, mask) : HWSTATUSEQUALS(hwValue, mask));
 
                 // std::cout << "x = " << x << ", y = " << y << ", value = " << GetValue(adr) << std::endl;
                 // std::cout << "adr = " << detector.AddressName(adr) << ", x = " << x << ", y = " << y << ", value = " << GetValue(adr) << std::endl;
                 if (hit) {
                   h2->SetBinContent(x, y, 1.0 * value);
                 } else if (reset) {
                   h2->SetBinContent(x, y, 0.0);
                 }
               }
             }
           }
         }
       }
 
     } else {
       LOG_WARN << "cscdqm::Summary.WriteChamberState routine. Wrong histogram dimensions!";
     }
   }

◆ WriteMap()

void cscdqm::Summary::WriteMap ( TH2 *& h2 )

Write PhysicsReady Map to H2 histogram.

Parameters

h2	Histogram to write map to

Definition at line 279 of file CSCDQM_Summary.cc.

References IsPhysicsReady(), LOG_WARN, NTICS, runGCPTkAlMap::title, x, TrackerOfflineValidation_Dqm_cff::xmax, and TrackerOfflineValidation_Dqm_cff::xmin.

Referenced by cscdqm::EventProcessor::updateEfficiencyHistos().

                                  {
     unsigned int rep_el = 0, csc_el = 0;
 
     if (h2->GetXaxis()->GetXmin() <= 1 && h2->GetXaxis()->GetXmax() >= NTICS && h2->GetYaxis()->GetXmin() <= 1 &&
         h2->GetYaxis()->GetXmax() >= NTICS) {
       float xd = 5.0 / NTICS;
 
       float xmin, xmax;
 
       for (unsigned int x = 0; x < NTICS; x++) {
         xmin = -2.5 + xd * x;
         xmax = xmin + xd;
 
         for (unsigned int y = 0; y < NTICS; y++) {
           double value = 0.0;
 
           if (xmin == -2.5 || xmax == 2.5)
             continue;
           if (xmin >= -1 && xmax <= 1)
             continue;
 
           switch (IsPhysicsReady(x, y)) {
             case -1:
               value = -1.0;
               break;
             case 0:
               value = 0.0;
               rep_el++;
               break;
             case 1:
               value = 1.0;
               rep_el++;
               break;
             case 2:
               value = 2.0;
               rep_el++;
           }
 
           h2->SetBinContent(x + 1, y + 1, value);
           csc_el++;
         }
       }
 
     } else {
       LOG_WARN << "cscdqm::Summary.WriteMap routine. Wrong histogram dimensions!";
     }
 
     TString title =
         Form("EMU Status: Physics Efficiency %.2f%%", (csc_el == 0 ? 0.0 : (1.0 * rep_el) / csc_el) * 100.0);
     h2->SetTitle(title);
   }

Member Data Documentation

◆ detector

Detector cscdqm::Summary::detector

private

Detector routines object

Definition at line 131 of file CSCDQM_Summary.h.

Referenced by getDetector(), GetEfficiencyArea(), GetEfficiencyHW(), GetReportingArea(), GetValue(), IsPhysicsReady(), setMaskedHWElements(), SetValue(), Write(), and WriteChamberState().

◆ map

HWStatusBitSet cscdqm::Summary::map[2][4][3][36][6][5][5]

private

Atomic HW element status matrix

Definition at line 128 of file CSCDQM_Summary.h.

Referenced by OrderedSet.OrderedSet::__contains__(), OrderedSet.OrderedSet::__len__(), OrderedSet.OrderedSet::add(), OrderedSet.OrderedSet::discard(), GetValue(), and SetValue().

Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ Summary()

◆ ~Summary()

Member Function Documentation

◆ ChamberAddressToCoords()

◆ ChamberCoordsToAddress()

◆ getDetector()

◆ GetEfficiencyArea() [1/2]

◆ GetEfficiencyArea() [2/2]

◆ GetEfficiencyHW() [1/3]

◆ GetEfficiencyHW() [2/3]

◆ GetEfficiencyHW() [3/3]

◆ GetReportingArea()

◆ GetValue()

◆ isChamberStandby() [1/2]

◆ isChamberStandby() [2/2]

◆ IsPhysicsReady()

◆ ReadErrorChambers()

◆ ReadReportingChambers()

◆ ReadReportingChambersRef()

◆ Reset()

◆ ReSetValue() [1/2]

◆ ReSetValue() [2/2]

◆ setMaskedHWElements()

◆ SetValue() [1/2]

◆ SetValue() [2/2]

◆ Write()

◆ WriteChamberState()

◆ WriteMap()

Member Data Documentation

◆ detector

◆ map