#include <OpticalObject.h>

Inheritance diagram for OpticalObject:

Public Member Functions
void	addCoordinateEntryToList (Entry *entry)

void	addExtraEntryToList (Entry *entry)

void	addExtraEntryValueOriginalOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueToList (ALIdouble entry_value)

double	addPii (double val)

double	approxTo0 (double val)

CLHEP::HepRotation	buildRmFromEntryValuesOriginalOriginal ()

const CLHEP::Hep3Vector &	centreGlob () const

const CLHEP::Hep3Vector &	centreGlobal () const

const CLHEP::Hep3Vector &	centreGlobOriginal () const

const CLHEP::Hep3Vector &	centreGlobOriginalOriginal () const

const CLHEP::Hep3Vector	centreLocal () const

int	checkMatrixEquations (double angleX, double angleY, double angleZ, CLHEP::HepRotation *rot=nullptr)

void	construct ()

void	constructFromOptAligInfo (const OpticalAlignInfo &oaInfo)

virtual void	constructMaterial ()

virtual void	constructSolidShape ()

const std::vector< Entry * > &	CoordinateEntryList () const

void	createComponentOptOsFromOptAlignInfo ()

virtual void	defaultBehaviour (LightRay &lightray, Measurement &meas)

virtual void	detailedDeviatesLightRay (LightRay &lightray)

virtual void	detailedTraversesLightRay (LightRay &lightray)

double	diff2pi (double ang1, double ang2)

void	displaceCentreGlob (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlob (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginalOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginalOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceExtraEntry (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginalOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceRmGlobAroundGlobal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobAroundLocal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginalOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

bool	eq2ang (double ang1, double ang2)

const std::vector< Entry * > &	ExtraEntryList () const

const ALIint	extraEntryNo (const ALIstring &entry_name) const

std::vector< ALIdouble > &	ExtraEntryValueList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalOriginalList ()

virtual void	fastDeviatesLightRay (LightRay &lightray)

virtual void	fastTraversesLightRay (LightRay &lightray)

virtual void	fillIguana ()

virtual void	fillVRML ()

const ALIdouble	findExtraEntryValue (const ALIstring &eename) const

const ALIbool	findExtraEntryValueIfExists (const ALIstring &eename, ALIdouble &value) const

const ALIdouble	findExtraEntryValueMustExist (const ALIstring &eename) const

const ALIuint	getCmsswID () const

std::vector< ALIstring >	getCoordinateFromOptAlignParam (const OpticalAlignParam &oaParam)

CLHEP::Hep3Vector	getDisplacementInLocalCoordinates (const XYZcoor coor, const ALIdouble disp)

const double	getEntryCentre (const XYZcoor coor) const

const double	getEntryCentre (const ALIstring &coor) const

const double	getEntryRMangle (const XYZcoor coor) const

const double	getEntryRMangle (const ALIstring &coor) const

std::vector< double >	getLocalRotationAngles (const std::vector< Entry *> &entries) const

CocoaMaterialElementary *	getMaterial () const

ALIPlane	getPlate (const ALIbool forwardPlate, const ALIbool applyWedge)

std::vector< double >	getRotationAnglesFromMatrix (CLHEP::HepRotation &rmLocal, const std::vector< Entry *> &entries) const

std::vector< double >	getRotationAnglesInOptOFrame (const OpticalObject optoAncestor, const std::vector< Entry > &entries) const

CocoaSolidShape *	getSolidShape () const

CLHEP::Hep3Vector	getZAxis ()

const ALIuint	ID () const

const ALIstring	longName () const

virtual void	makeMeasurement (LightRay &lightray, Measurement &meas)

Measurement *	meas ()

const ALIstring &	name () const

	OpticalObject ()

	OpticalObject (OpticalObject *parent, const ALIstring &type, const ALIstring &name, const ALIbool copy_data)

const OpticalObject *	parent () const

virtual void	participateInMeasurement (LightRay &lightray, Measurement &meas, const ALIstring &behav)

void	propagateGlobalRMOriginalOriginalChangeToChildren (const CLHEP::HepRotation &rmorioriold, const CLHEP::HepRotation &rmoriorinew)

void	resetGlobalCoordinates ()

void	resetOriginalOriginalCoordinates ()

const CLHEP::HepRotation &	rmGlob () const

const CLHEP::HepRotation &	rmGlobOriginal () const

const CLHEP::HepRotation &	rmGlobOriginalOriginal () const

const CLHEP::HepRotation	rmLocal () const

void	setCmsswID (ALIuint id)

void	setExtraEntryValue (const ALIuint entryNo, const ALIdouble disp)

void	setGlobalCoordinates ()

void	setGlobalRMOriginalOriginal (const CLHEP::HepRotation &rmoriori)

void	setID (ALIuint id)

void	setMeas (Measurement *meas)
	set current measurement More...

void	setOriginalEntryValues ()

void	setRmGlobal (const CLHEP::HepRotation &rm)

void	setRmGlobalOriginal (const CLHEP::HepRotation &rm)

void	setType (const ALIstring &type)

const ALIstring	shortName () const

const ALIstring &	type () const

virtual void	userDefinedBehaviour (LightRay &lightray, Measurement &meas, const ALIstring &behav)

virtual	~OpticalObject ()

Protected Member Functions
virtual void	fillExtraEntry (std::vector< ALIstring > &wordlist)

Protected Attributes
CocoaMaterialElementary *	theMaterial

CocoaSolidShape *	theSolidShape

ALIint	verbose

Private Member Functions
void	buildWordList (const Entry *entry, std::vector< ALIstring > &wordlist)

void	calculateLocalRotationAxisInGlobal ()

void	copyData ()

void	createComponentOptOs (ALIFileIn &filein)

OpticalObject *	createNewOptO (OpticalObject *parent, ALIstring optoType, ALIstring optoName, ALIbool fcopyComponents)

void	fillCoordinateEntry (const ALIstring &coor_name, const std::vector< ALIstring > &wordlist)

CLHEP::Hep3Vector	getDispVec (const XYZcoor coor, const ALIdouble disp)

void	readCoordinates (const ALIstring &coor_type_read, const ALIstring &coor_type_expected, ALIFileIn &filein)

void	readData (ALIFileIn &filein)

void	readExtraEntries (ALIFileIn &filein)

template<class T >
void	rotateItAroundGlobal (T &object, const XYZcoor coor, const double disp)

void	SetAnglesIsGlobal (ALIbool isG)

void	setAnglesNull ()

void	SetCentreGlobFromCentreLocal ()

void	SetCentreIsGlobal (ALIbool isG)

void	SetCentreLocalFromEntryValues ()

void	setGlobalCentre ()

void	setGlobalCoordinatesOfComponents ()

void	setGlobalRM ()

void	SetRMGlobFromRMLocal ()

void	SetRMGlobFromRMLocalOriginalOriginal (const CLHEP::HepRotation &rmoriori)

void	SetRMLocalFromEntryValues ()

void	transformCylindrical2Cartesian ()

void	transformGlobal2Local ()

void	transformSpherical2Cartesian ()

Private Attributes
ALIbool	anglesIsGlobal

CLHEP::Hep3Vector	axisXLocalInGlobal

CLHEP::Hep3Vector	axisYLocalInGlobal

CLHEP::Hep3Vector	axisZLocalInGlobal

ALIbool	centreIsGlobal

ALIbool	fcopyData

CLHEP::Hep3Vector	theCentreGlob

CLHEP::Hep3Vector	theCentreGlobOriginal

CLHEP::Hep3Vector	theCentreGlobOriginalOriginal

ALIuint	theCmsswID

std::vector< Entry * >	theCoordinateEntryVector

Measurement *	theCurrentMeas

std::vector< ALIdouble >	theExtraEntryValueOriginalOriginalVector

std::vector< ALIdouble >	theExtraEntryValueOriginalVector

std::vector< ALIdouble >	theExtraEntryValueVector

std::vector< Entry * >	theExtraEntryVector

ALIstring	theName

OpticalObject *	theParent

CLHEP::HepRotation	theRmGlob

CLHEP::HepRotation	theRmGlobOriginal

CLHEP::HepRotation	theRmGlobOriginalOriginal

ALIstring	theType

Friends
std::ostream &	operator<< (std::ostream &os, const OpticalObject &c)

Detailed Description

Definition at line 35 of file OpticalObject.h.

Constructor & Destructor Documentation

◆ OpticalObject() [1/2]

OpticalObject::OpticalObject ( )

inline

Definition at line 40 of file OpticalObject.h.

40 {};

◆ OpticalObject() [2/2]

OpticalObject::OpticalObject	(	OpticalObject *	parent,
		const ALIstring &	type,
		const ALIstring &	name,
		const ALIbool	copy_data
	)

Definition at line 53 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, fcopyData, OpticalObjectMgr::getInstance(), OpticalObjectMgr::registerMe(), theName, and theType.

     : theParent(parent), theType(type), theName(name), fcopyData(copy_data) {
   if (ALIUtils::debug >= 4) {
     std::cout << std::endl
               << "@@@@ Creating OpticalObject: NAME= " << theName << " TYPE= " << theType << " fcopyData " << fcopyData
               << std::endl;
   }
 
   OpticalObjectMgr::getInstance()->registerMe(this);
 }

◆ ~OpticalObject()

OpticalObject::~OpticalObject ( )

virtual

Definition at line 1644 of file OpticalObject.cc.

1644 {}

Member Function Documentation

◆ addCoordinateEntryToList()

void OpticalObject::addCoordinateEntryToList ( Entry * entry )

inline

Definition at line 111 of file OpticalObject.h.

References mps_splice::entry, and theCoordinateEntryVector.

Referenced by fillCoordinateEntry(), and setAnglesNull().

111 { theCoordinateEntryVector.push_back(entry); }

mps_splice.entry

entry

Definition: mps_splice.py:68

OpticalObject::theCoordinateEntryVector

std::vector< Entry * > theCoordinateEntryVector

Definition: OpticalObject.h:293

◆ addExtraEntryToList()

void OpticalObject::addExtraEntryToList ( Entry * entry )

inline

Definition at line 112 of file OpticalObject.h.

References mps_splice::entry, and theExtraEntryVector.

Referenced by fillExtraEntry().

112 { theExtraEntryVector.push_back(entry); }

mps_splice.entry

entry

Definition: mps_splice.py:68

OpticalObject::theExtraEntryVector

std::vector< Entry * > theExtraEntryVector

Definition: OpticalObject.h:294

◆ addExtraEntryValueOriginalOriginalToList()

void OpticalObject::addExtraEntryValueOriginalOriginalToList ( ALIdouble entry_value )

inline

Definition at line 117 of file OpticalObject.h.

References theExtraEntryValueOriginalOriginalVector.

Referenced by setOriginalEntryValues().

                                                                        {
     theExtraEntryValueOriginalOriginalVector.push_back(entry_value);
   }

◆ addExtraEntryValueOriginalToList()

void OpticalObject::addExtraEntryValueOriginalToList ( ALIdouble entry_value )

inline

Definition at line 114 of file OpticalObject.h.

References theExtraEntryValueOriginalVector.

Referenced by setOriginalEntryValues().

                                                                {
     theExtraEntryValueOriginalVector.push_back(entry_value);
   }

◆ addExtraEntryValueToList()

void OpticalObject::addExtraEntryValueToList ( ALIdouble entry_value )

inline

Definition at line 113 of file OpticalObject.h.

References theExtraEntryValueVector.

Referenced by fillExtraEntry().

113 { theExtraEntryValueVector.push_back(entry_value); }

OpticalObject::theExtraEntryValueVector

std::vector< ALIdouble > theExtraEntryValueVector

Definition: OpticalObject.h:297

◆ addPii()

double OpticalObject::addPii ( double val )

Definition at line 1830 of file OpticalObject.cc.

References M_PI, and heppy_batch::val.

                                        {
   if (val < M_PI) {
     val += M_PI;
   } else {
     val -= M_PI;
   }
 
   return val;
 }

◆ approxTo0()

double OpticalObject::approxTo0 ( double val )

Definition at line 1822 of file OpticalObject.cc.

References boostedTaus_cff::precision, and heppy_batch::val.

                                           {
   double precision = 1.e-9;
   if (fabs(val) < precision)
     val = 0;
   return val;
 }

◆ buildRmFromEntryValuesOriginalOriginal()

CLHEP::HepRotation OpticalObject::buildRmFromEntryValuesOriginalOriginal ( )

Definition at line 675 of file OpticalObject.cc.

References CoordinateEntryList(), gather_cfg::cout, ALIUtils::debug, ALIUtils::dumprm(), getEntryRMangle(), longName(), name(), parent(), eostools::rm(), theRmGlob, XCoor, YCoor, and ZCoor.

                                                                        {
   CLHEP::HepRotation rm;
   const OpticalObject* opto_par = this;
   //  if(Model::GlobalOptions()["rotateAroundLocal"] == 0) {
   if (ALIUtils::debug >= 55)
     std::cout << "rotate with parent: before X " << opto_par->parent()->name() << " "
               << parent()->getEntryRMangle(XCoor) << std::endl;
   const std::vector<Entry*>& cel = CoordinateEntryList();
   rm.rotateX(cel[3]->valueOriginalOriginal());
   if (ALIUtils::debug >= 55)
     std::cout << "rotate with parent: before Y " << opto_par->parent()->name() << " "
               << parent()->getEntryRMangle(YCoor) << std::endl;
   rm.rotateY(cel[4]->valueOriginalOriginal());
   if (ALIUtils::debug >= 55)
     std::cout << "rotate with parent: before Z " << opto_par->parent()->name() << " "
               << parent()->getEntryRMangle(ZCoor) << std::endl;
   rm.rotateZ(cel[5]->valueOriginalOriginal());
   //-  rm.rotateZ( getEntryRMangle(ZCoor) );
   if (ALIUtils::debug >= 54)
     ALIUtils::dumprm(theRmGlob, "SetRMGlobFromRMLocal: RM GLOB after " + opto_par->parent()->longName());
 
   return rm;
 }

◆ buildWordList()

void OpticalObject::buildWordList	(	const Entry *	entry,
		std::vector< ALIstring > &	wordlist
	)

private

Definition at line 418 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dumpVS(), and mps_splice::entry.

Referenced by copyData().

                                                                                     {
   //---------- 1st add name
   wordlist.push_back(entry->name());
 
   //---------- 1st add value
   char chartmp[20];
   gcvt(entry->value() / entry->ValueDimensionFactor(), 10, chartmp);
   wordlist.push_back(chartmp);
 
   //---------- 1st add sigma
   gcvt(entry->sigma() / entry->SigmaDimensionFactor(), 10, chartmp);
   wordlist.push_back(chartmp);
 
   //---------- 1st add quality
   ALIstring strtmp;
   ALIint inttmp = entry->quality();
   switch (inttmp) {
     case 0:
       strtmp = "fix";
       break;
     case 1:
       strtmp = "cal";
       break;
     case 2:
       strtmp = "unk";
       break;
     default:
       std::cerr << "buildWordList: entry " << entry->OptOCurrent()->name() << entry->name() << " quality not found "
                 << inttmp << std::endl;
       break;
   }
   wordlist.push_back(strtmp);
 
   if (ALIUtils::debug >= 9) {
     ALIUtils::dumpVS(wordlist, "buildWordList: ", std::cout);
   }
 }

◆ calculateLocalRotationAxisInGlobal()

void OpticalObject::calculateLocalRotationAxisInGlobal ( )

private

Definition at line 1723 of file OpticalObject.cc.

References axisXLocalInGlobal, axisYLocalInGlobal, axisZLocalInGlobal, gather_cfg::cout, ALIUtils::debug, name(), and theRmGlob.

Referenced by displaceRmGlobAroundLocal(), resetGlobalCoordinates(), resetOriginalOriginalCoordinates(), and setGlobalRM().

                                                        {
   axisXLocalInGlobal = CLHEP::Hep3Vector(1., 0., 0.);
   axisXLocalInGlobal *= theRmGlob;
   axisYLocalInGlobal = CLHEP::Hep3Vector(0., 1., 0.);
   axisYLocalInGlobal *= theRmGlob;
   axisZLocalInGlobal = CLHEP::Hep3Vector(0., 0., 1.);
   axisZLocalInGlobal *= theRmGlob;
   if (ALIUtils::debug >= 4) {
     std::cout << name() << " axis X local in global " << axisXLocalInGlobal << std::endl;
     std::cout << name() << " axis Y local in global " << axisYLocalInGlobal << std::endl;
     std::cout << name() << " axis Z local in global " << axisZLocalInGlobal << std::endl;
   }
 }

◆ centreGlob()

const CLHEP::Hep3Vector& OpticalObject::centreGlob ( ) const

inline

Definition at line 75 of file OpticalObject.h.

References theCentreGlob.

Referenced by centreGlobal(), centreLocal(), OptOPinhole::defaultBehaviour(), OptOCubeSplitter::detailedDeviatesLightRay(), displaceRmGlobAroundGlobal(), displaceRmGlobAroundLocal(), displaceRmGlobOriginal(), displaceRmGlobOriginalOriginal(), CocoaDBMgr::GetAlignInfoFromOptO(), OptOCubeSplitter::getMiddlePlate(), CocoaDBMgr::GetOptAlignInfoFromOptO(), getPlate(), OptOCubeSplitter::getUpperPlate(), LightRay::intersect(), LightRay::LightRay(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), Fit::printCentreInOptOFrame(), SetCentreGlobFromCentreLocal(), SetCentreLocalFromEntryValues(), setOriginalEntryValues(), LightRay::startLightRay(), OptOUserDefined::userDefinedBehaviour(), and EntryLengthAffCentre::valueDisplaced().

75 { return theCentreGlob; }

OpticalObject::theCentreGlob

CLHEP::Hep3Vector theCentreGlob

Definition: OpticalObject.h:284

◆ centreGlobal()

const CLHEP::Hep3Vector& OpticalObject::centreGlobal ( ) const

inline

Definition at line 77 of file OpticalObject.h.

References centreGlob().

77 { return centreGlob(); }

OpticalObject::centreGlob

const CLHEP::Hep3Vector & centreGlob() const

Definition: OpticalObject.h:75

◆ centreGlobOriginal()

const CLHEP::Hep3Vector& OpticalObject::centreGlobOriginal ( ) const

inline

Definition at line 81 of file OpticalObject.h.

References theCentreGlobOriginal.

Referenced by displaceCentreGlob(), displaceRmGlobAroundGlobal(), displaceRmGlobAroundLocal(), displaceRmGlobOriginal(), resetGlobalCoordinates(), and EntryLengthAffCentre::valueDisplaced().

81 { return theCentreGlobOriginal; }

OpticalObject::theCentreGlobOriginal

CLHEP::Hep3Vector theCentreGlobOriginal

Definition: OpticalObject.h:287

◆ centreGlobOriginalOriginal()

const CLHEP::Hep3Vector& OpticalObject::centreGlobOriginalOriginal ( ) const

inline

Definition at line 82 of file OpticalObject.h.

References theCentreGlobOriginalOriginal.

Referenced by displaceRmGlobOriginalOriginal().

82 { return theCentreGlobOriginalOriginal; }

OpticalObject::theCentreGlobOriginalOriginal

CLHEP::Hep3Vector theCentreGlobOriginalOriginal

Definition: OpticalObject.h:289

◆ centreLocal()

const CLHEP::Hep3Vector OpticalObject::centreLocal ( ) const

Definition at line 1938 of file OpticalObject.cc.

References centreGlob(), parent(), rmGlob(), and theCentreGlob.

Referenced by CocoaToDDLMgr::pv().

                                                        {
   CLHEP::Hep3Vector cLocal = theCentreGlob - parent()->centreGlob();
   CLHEP::HepRotation rmParentInv = inverseOf(parent()->rmGlob());
   cLocal = rmParentInv * cLocal;
 
   return cLocal;
   /*-
 
   if( theCoordinateEntryVector.size() >= 3 ) {
     return CLHEP::Hep3Vector( theCoordinateEntryVector[0]->value(), theCoordinateEntryVector[1]->value(), theCoordinateEntryVector[2]->value() );
   } else {
     return CLHEP::Hep3Vector(0.,0.,0.);
   }
   */
 }

◆ checkMatrixEquations()

int OpticalObject::checkMatrixEquations	(	double	angleX,
		double	angleY,
		double	angleZ,
		CLHEP::HepRotation *	rot = `nullptr`
	)

Definition at line 1841 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, funct::cos(), eq2ang(), makeMuonMisalignmentScenario::rot, funct::sin(), fftjetcommon_cfi::sx, and fftjetcommon_cfi::sy.

                                                                                                           {
   //-  std::cout << " cme " << angleX << " " << angleY << " " << angleZ << std::endl;
   if (rot == nullptr) {
     rot = new CLHEP::HepRotation();
     rot->rotateX(angleX);
     rot->rotateY(angleY);
     rot->rotateZ(angleZ);
   }
   double sx = sin(angleX);
   double cx = cos(angleX);
   double sy = sin(angleY);
   double cy = cos(angleY);
   double sz = sin(angleZ);
   double cz = cos(angleZ);
 
   double rotxx = cy * cz;
   double rotxy = sx * sy * cz - cx * sz;
   double rotxz = cx * sy * cz + sx * sz;
   double rotyx = cy * sz;
   double rotyy = sx * sy * sz + cx * cz;
   double rotyz = cx * sy * sz - sx * cz;
   double rotzx = -sy;
   double rotzy = sx * cy;
   double rotzz = cx * cy;
 
   int matrixElemBad = 0;
   if (!eq2ang(rot->xx(), rotxx)) {
     std::cerr << " EQUATION for xx() IS BAD " << rot->xx() << " <> " << rotxx << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->xy(), rotxy)) {
     std::cerr << " EQUATION for xy() IS BAD " << rot->xy() << " <> " << rotxy << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->xz(), rotxz)) {
     std::cerr << " EQUATION for xz() IS BAD " << rot->xz() << " <> " << rotxz << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->yx(), rotyx)) {
     std::cerr << " EQUATION for yx() IS BAD " << rot->yx() << " <> " << rotyx << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->yy(), rotyy)) {
     std::cerr << " EQUATION for yy() IS BAD " << rot->yy() << " <> " << rotyy << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->yz(), rotyz)) {
     std::cerr << " EQUATION for yz() IS BAD " << rot->yz() << " <> " << rotyz << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->zx(), rotzx)) {
     std::cerr << " EQUATION for zx() IS BAD " << rot->zx() << " <> " << rotzx << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->zy(), rotzy)) {
     std::cerr << " EQUATION for zy() IS BAD " << rot->zy() << " <> " << rotzy << std::endl;
     matrixElemBad++;
   }
   if (!eq2ang(rot->zz(), rotzz)) {
     std::cerr << " EQUATION for zz() IS BAD " << rot->zz() << " <> " << rotzz << std::endl;
     matrixElemBad++;
   }
 
   //-  std::cout << " cme: matrixElemBad " << matrixElemBad << std::endl;
   return matrixElemBad;
 }

◆ construct()

void OpticalObject::construct ( )

Definition at line 70 of file OpticalObject.cc.

References constructMaterial(), constructSolidShape(), copyData(), gather_cfg::cout, createComponentOptOs(), ALIUtils::debug, fcopyData, ALIFileIn::getInstance(), name(), readData(), Model::SDFName(), setGlobalCoordinates(), setOriginalEntryValues(), and theParent.

Referenced by createComponentOptOs(), and Model::readSystemDescription().

                               {
   //---------- Get file handler
   ALIFileIn& filein = ALIFileIn::getInstance(Model::SDFName());
   /*-  if(!filein) {
     filein.ErrorInLine();
     std::cerr << "cannot open file SystemDescription.txt" << std::endl;
     exit(0);
     }*/
 
   if (theParent != nullptr) {  //----- OptO 'system' has no parent (and no affine frame)
     //---------- Read or copy Data
     if (!fcopyData) {
       if (ALIUtils::debug >= 4)
         std::cout << "@@@@ Reading data of Optical Object " << name() << std::endl;
       readData(filein);
     } else {
       if (ALIUtils::debug >= 4)
         std::cout << "Copy data of Optical Object " << name() << std::endl;
       copyData();
     }
 
     //---------- Set global coordinates
     setGlobalCoordinates();
     //---------- Set ValueDisplacementByFitting to 0. !!done at Entry construction
     /*    std::vector<Entry*>::const_iterator vecite;
     for ( vecite = CoordinateEntryList().begin(); vecite != CoordinateEntryList().end(); vecite++) {
       (*vecite)->setValueDisplacementByFitting( 0. );
     }
     */
 
     //---------- Set original entry values
     setOriginalEntryValues();
   }
 
   //---------- Create the OptO that compose this one
   createComponentOptOs(filein);
 
   //---------- Construct material
   constructMaterial();
 
   //---------- Construct solid shape
   constructSolidShape();
 }

◆ constructFromOptAligInfo()

void OpticalObject::constructFromOptAligInfo ( const OpticalAlignInfo & oaInfo )

Definition at line 2016 of file OpticalObject.cc.

References anglesIsGlobal, OpticalAlignInfo::angx_, OpticalAlignInfo::angy_, OpticalAlignInfo::angz_, centreIsGlobal, constructMaterial(), constructSolidShape(), gather_cfg::cout, createComponentOptOsFromOptAlignInfo(), ALIUtils::debug, OpticalAlignInfo::extraEntries_, fillCoordinateEntry(), fillExtraEntry(), getCoordinateFromOptAlignParam(), OpticalAlignInfo::ID_, setCmsswID(), setGlobalCoordinates(), setOriginalEntryValues(), theParent, OpticalAlignInfo::x_, OpticalAlignInfo::y_, and OpticalAlignInfo::z_.

Referenced by Model::BuildSystemDescriptionFromOA(), and createComponentOptOsFromOptAlignInfo().

                                                                            {
   if (theParent != nullptr) {  //----- OptO 'system' has no parent (and no affine frame)
     //---------- Build Data
     //---------- See if there are extra entries and read them
     std::vector<OpticalAlignParam> exEnt = oaInfo.extraEntries_;
     std::vector<OpticalAlignParam>::iterator ite;
     std::vector<ALIstring> wordlist;
     for (ite = exEnt.begin(); ite != exEnt.end(); ++ite) {
       wordlist = getCoordinateFromOptAlignParam(*ite);
       wordlist.insert(wordlist.begin(), (*ite).dimType());
       fillExtraEntry(wordlist);
     }
 
     //--------- set centre and angles not global (default behaviour)
     centreIsGlobal = false;
     anglesIsGlobal = false;
 
     setCmsswID(oaInfo.ID_);
     //--------- build Coordinates
     fillCoordinateEntry("centre", getCoordinateFromOptAlignParam(oaInfo.x_));
     fillCoordinateEntry("centre", getCoordinateFromOptAlignParam(oaInfo.y_));
     fillCoordinateEntry("centre", getCoordinateFromOptAlignParam(oaInfo.z_));
     fillCoordinateEntry("angles", getCoordinateFromOptAlignParam(oaInfo.angx_));
     fillCoordinateEntry("angles", getCoordinateFromOptAlignParam(oaInfo.angy_));
     fillCoordinateEntry("angles", getCoordinateFromOptAlignParam(oaInfo.angz_));
 
     //---------- Set global coordinates
     setGlobalCoordinates();
 
     //---------- Set original entry values
     setOriginalEntryValues();
   }
 
   //---------- Construct material
   constructMaterial();
 
   //---------- Construct solid shape
   constructSolidShape();
 
   if (ALIUtils::debug >= 5) {
     std::cout << "constructFromOptAligInfo constructed: " << *this << std::endl;
   }
 
   //---------- Create the OptO that compose this one
   createComponentOptOsFromOptAlignInfo();
 }

◆ constructMaterial()

void OpticalObject::constructMaterial ( )

virtual

Definition at line 2001 of file OpticalObject.cc.

References f, and theMaterial.

Referenced by construct(), and constructFromOptAligInfo().

                                       {
   theMaterial = new CocoaMaterialElementary("Hydrogen", 70.8 * mg / cm3, "H", 1.00794f, 1);
 }

◆ constructSolidShape()

void OpticalObject::constructSolidShape ( )

virtual

Reimplemented in OptOSensor2D, OptOCOPS, OptOCubeSplitter, OptOMirror, OptOModifiedRhomboidPrism, OptOOpticalSquare, OptOPlateSplitter, OptODistancemeter, OptODistancemeter3dim, OptOTiltmeter, OptOLaser, OptOSource, OptOLens, OptOPinhole, OptOScreen, OptOCameraDetector, OptORisleyPrism, and OptOXLaser.

Definition at line 2006 of file OpticalObject.cc.

References GlobalOptionMgr::getGlobalOptionValue(), GlobalOptionMgr::getInstance(), visualization-live-secondInstance_cfg::m, and theSolidShape.

Referenced by construct(), and constructFromOptAligInfo().

                                         {
   ALIdouble go;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   gomgr->getGlobalOptionValue("VisScale", go);
 
   theSolidShape = new CocoaSolidShapeBox(
       "Box", go * 5. * cm / m, go * 5. * cm / m, go * 5. * cm / m);  //COCOA internal units are meters
 }

◆ CoordinateEntryList()

const std::vector<Entry*>& OpticalObject::CoordinateEntryList ( ) const

inline

Definition at line 63 of file OpticalObject.h.

References theCoordinateEntryVector.

Referenced by Measurement::addAffectingEntriesFromOptO(), buildRmFromEntryValuesOriginalOriginal(), copyData(), Model::deleteOptO(), Fit::findEntryFitPosition(), CocoaDBMgr::GetAlignInfoErrorFromOptO(), CocoaDBMgr::GetOptAlignInfoFromOptO(), Fit::printCentreInOptOFrame(), Fit::printRotationAnglesInOptOFrame(), and CocoaToDDLMgr::specPar().

63 { return theCoordinateEntryVector; }

OpticalObject::theCoordinateEntryVector

std::vector< Entry * > theCoordinateEntryVector

Definition: OpticalObject.h:293

◆ copyData()

void OpticalObject::copyData ( )

private

Definition at line 371 of file OpticalObject.cc.

References anglesIsGlobal, buildWordList(), centreIsGlobal, CoordinateEntryList(), gather_cfg::cout, ALIUtils::debug, ALIUtils::dumpVS(), ExtraEntryList(), fillCoordinateEntry(), fillExtraEntry(), name(), Model::nextOptOToCopy(), and theName.

Referenced by construct().

                              {
   centreIsGlobal = false;
   anglesIsGlobal = false;
   if (ALIUtils::debug >= 5)
     std::cout << "entering copyData()" << std::endl;
 
   //---------- Get copied OptO
   OpticalObject* opto = Model::nextOptOToCopy();
 
   //---------- build name: for a copied OptO, now name is parent name, add the last part of the copied OptO
   ALIint copy_name_last_slash = opto->name().rfind('/');
   ALIint copy_name_size = opto->name().length();
   //-  if(ALIUtils::debug >= 9) std::cout << "BUILD UP NAME0 " << theName << std::endl;
   theName.append(opto->name(), copy_name_last_slash, copy_name_size);
   if (ALIUtils::debug >= 5)
     std::cout << "copying OptO: " << opto->name() << " to OptO " << theName << std::endl;
 
   //---------- Copy Extra Entries from copied OptO
   std::vector<Entry*>::const_iterator vecite;
   for (vecite = opto->ExtraEntryList().begin(); vecite != opto->ExtraEntryList().end(); ++vecite) {
     std::vector<ALIstring> wordlist;
     wordlist.push_back((*vecite)->type());
     buildWordList((*vecite), wordlist);
     if (ALIUtils::debug >= 9) {
       ALIUtils::dumpVS(wordlist, "copyData: ", std::cout);
     }
     fillExtraEntry(wordlist);
   }
 
   //---------- Copy Coordinate Entries from copied OptO
   for (vecite = opto->CoordinateEntryList().begin(); vecite != opto->CoordinateEntryList().end(); ++vecite) {
     std::vector<ALIstring> wordlist;
     buildWordList((*vecite), wordlist);
     //----- first three coordinates centre, second three coordinates angles!!PROTECT AGAINST OTHER POSSIBILITIES!!
     ALIstring coor_name;
     if (vecite - opto->CoordinateEntryList().begin() < 3) {
       coor_name = "centre";
     } else {
       coor_name = "angles";
     }
     fillCoordinateEntry(coor_name, wordlist);
   }
 }

◆ createComponentOptOs()

void OpticalObject::createComponentOptOs ( ALIFileIn & filein )

private

Definition at line 459 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, construct(), gather_cfg::cout, Model::createCopyComponentList(), createNewOptO(), ALIUtils::debug, ALIFileIn::ErrorInLine(), beamvalidation::exit(), fcopyData, Model::getComponentOptOTypes(), OpticalObjectMgr::getInstance(), ALIUtils::getInt(), ALIFileIn::getWordsInLine(), name(), Model::OptOList(), setID(), and type().

Referenced by construct().

                                                           {
   //---------- flag to determine if components are copied or read (it is passed to the constructor of component OptOs)
   ALIbool fcopyComponents = false;
 
   //---------- Get list of components of current OptO (copy it to 'vopto_types')
   std::vector<ALIstring> vopto_types;
   int igetood = Model::getComponentOptOTypes(type(), vopto_types);
   if (!igetood) {
     if (ALIUtils::debug >= 5)
       std::cout << " NO MORE COMPONENTS IN THIS OptO" << name() << std::endl;
     return;
   }
 
   /*  //---------- Dump component list
   if(ALIUtils::debug >= 5) {
     ALIUtils::dumpVS( wordlist, "SYSTEM: ", std::cout );
     }*/
 
   //---------- Loop components (have to follow list in 'vopto_types')
   std::vector<ALIstring>::iterator vsite;
   std::vector<ALIstring> wordlist;
   for (vsite = vopto_types.begin(); vsite != vopto_types.end(); ++vsite) {
     //----- If it is not being copied, read first line describing object
     //- std::cout << "fcopyy" << fcopyComponents << fcopyData << theName << *vsite << std::endl;
     if (!fcopyData && !fcopyComponents)
       filein.getWordsInLine(wordlist);
     //t    if( !fcopyData ) filein.getWordsInLine(wordlist);
 
     //----- Check first line describing object
     //--- Don't check it if OptO is going to be copied (fcopyData = 1)
     //--- If OptO is not copied, but components will be copied, check if only for the first component (for the second fcopyComponents=1)
     if (fcopyData || fcopyComponents) {
       fcopyComponents = true;
       //--- If OptO not copied, but components will be copied
     } else if (wordlist[0] == ALIstring("copy_components")) {
       if (ALIUtils::debug >= 3)
         std::cout << "createComponentOptOs: copy_components" << wordlist[0] << std::endl;
       Model::createCopyComponentList(type());
       fcopyComponents = true;  //--- for the second and following components
       //----- If no copying: check that type is the expected one
     } else if (wordlist[0] != (*vsite)) {
       filein.ErrorInLine();
       std::cerr << "!!! Badly placed OpticalObject: " << wordlist[0] << " should be = " << (*vsite) << std::endl;
       exit(2);
     }
 
     //---------- Make composite component name
     ALIstring component_name = name();
     //----- if component is not going to be copied add name of component to the parent (if OptO is not copied and components will be, wordlist = 'copy-components', there is no wordlist[1]
     if (!fcopyComponents) {
       component_name += '/';
       component_name += wordlist[1];
     }
     //    if ( ALIUtils::debug >= 6 ) std::cout << "MAKE NAME " << name() << " TO " << component_name << std::endl;
 
     //---------- Create OpticalObject of the corresponding type
     OpticalObject* OptOcomponent = createNewOptO(this, *vsite, component_name, fcopyComponents);
 
     //----- Fill CMS software ID
     if (wordlist.size() == 3) {
       OptOcomponent->setID(ALIUtils::getInt(wordlist[2]));
     } else {
       OptOcomponent->setID(OpticalObjectMgr::getInstance()->buildCmsSwID());
     }
 
     //---------- Construct it (read data and
     OptOcomponent->construct();
 
     //---------- Fill OptO tree and OptO list
     Model::OptOList().push_back(OptOcomponent);
   }
 }

◆ createComponentOptOsFromOptAlignInfo()

void OpticalObject::createComponentOptOsFromOptAlignInfo ( )

Definition at line 2088 of file OpticalObject.cc.

References class-composition::children, constructFromOptAligInfo(), gather_cfg::cout, createNewOptO(), ALIUtils::debug, Model::getOpticalAlignments(), cuy::ii, OpticalAlignInfo::name_, Model::OptOList(), and theName.

Referenced by constructFromOptAligInfo().

                                                          {
   //----- Build children list of this object
   std::vector<OpticalAlignInfo> children;
 
   std::vector<OpticalAlignInfo>::const_iterator ite;
   if (ALIUtils::debug >= 5) {
     std::cout << " Model::getOpticalAlignments().size " << Model::getOpticalAlignments().size() << std::endl;
   }
   //  for( ite = Model::getOpticalAlignments().begin(); ite != Model::getOpticalAlignments().end(); ite++ ){
   int siz = Model::getOpticalAlignments().size();
   for (int ii = 0; ii < siz; ii++) {
     //    std::cout << " OpticalObject::getComponentOptOsFromOptAlignInfo name " <<  (*ite).name_ << std::endl;
     //   std::cout << " OpticalObject::getComponentOptOsFromOptAlignInfo " <<  (*ite).parentName_ << " =? " << theName << std::endl;
     //    std::cout <<  " OpticalObject::getComponentOptOsFromOptAlignInfo name " <<  ii << std::endl;
     //    if( (*ite)parentName_. == oaInfo.name() && (*ite).name() != "simple2DWithMirror:mirror1" ) {
     if (Model::getOpticalAlignments()[ii].parentName_ == theName) {
       //    if( (*ite).parentName_ == theName ) {
 
       //      std::cout << "createComponentOptOsFromOptAlignInfo: 1 to push_back " << std::endl;
       std::vector<OpticalAlignParam> exent = Model::getOpticalAlignments()[ii].extraEntries_;
       //    std::vector<OpticalAlignParam> exent = (*ite).extraEntries_;
       //-      std::cout << "createComponentOptOsFromOptAlignInfo: 2 to push_back " << std::endl;
       /*      for( ALIuint ij = 0; ij < exent.size(); ij++ ){
         std::cout << " extra entry " << exent[ij].name_;
         std::cout << " extra entry " << exent[ij].dimType();
         std::cout << " extra entry " << exent[ij].value_;
         std::cout << " extra entry " << exent[ij].error_;
         std::cout << " extra entry " << exent[ij].quality_;
         } */
       //      std::cout << "createComponentOptOsFromOptAlignInfo: 3 to push_back " << Model::getOpticalAlignments()[ii] << std::endl;
       OpticalAlignInfo oaInfochild = Model::getOpticalAlignments()[ii];
       //    OpticalAlignInfo oaInfochild =  *ite;
       //      std::cout << "createComponentOptOsFromOptAlignInfo: 4 to push_back " << std::endl;
       children.push_back(oaInfochild);
       if (ALIUtils::debug >= 5) {
         std::cout << theName << "createComponentOptOsFromOptAlignInfo: children added " << oaInfochild.name_
                   << std::endl;
       }
     }
     //    std::cout << "createComponentOptOsFromOptAlignInfo: 6 push_backed " << std::endl;
   }
   //  std::cout << "createComponentOptOsFromOptAlignInfo: 10 push_backed " << std::endl;
 
   if (ALIUtils::debug >= 5) {
     std::cout << "OpticalObject::createComponentsFromAlignInfo: N components = " << children.size() << std::endl;
   }
   for (ite = children.begin(); ite != children.end(); ++ite) {
     //---------- Get component type
     ALIstring optoType = (*ite).type_;
     //-    //---------- Get composite component name
     //-  ALIstring optoName = name()+"/"+(*ite).name_;
     //---------- Get component name
     ALIstring optoName = (*ite).name_;
     ALIbool fcopyComponents = false;
 
     //---------- Create OpticalObject of the corresponding type
     OpticalObject* OptOcomponent = createNewOptO(this, optoType, optoName, fcopyComponents);
 
     //---------- Construct it (read data and
     OptOcomponent->constructFromOptAligInfo(*ite);
 
     //---------- Fill OptO tree and OptO list
     Model::OptOList().push_back(OptOcomponent);
   }
 }

◆ createNewOptO()

OpticalObject * OpticalObject::createNewOptO	(	OpticalObject *	parent,
		ALIstring	optoType,
		ALIstring	optoName,
		ALIbool	fcopyComponents
	)

private

Definition at line 533 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, name(), and parent().

Referenced by createComponentOptOs(), and createComponentOptOsFromOptAlignInfo().

                                                                      {
   if (ALIUtils::debug >= 3)
     std::cout << " OpticalObject::createNewOptO optoType " << optoType << " optoName " << optoName << " parent "
               << parent->name() << std::endl;
   OpticalObject* OptOcomponent;
   if (optoType == "laser") {
     OptOcomponent = new OptOLaser(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "source") {
     OptOcomponent = new OptOSource(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "Xlaser") {
     OptOcomponent = new OptOXLaser(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "mirror") {
     OptOcomponent = new OptOMirror(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "plate_splitter") {
     OptOcomponent = new OptOPlateSplitter(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "cube_splitter") {
     OptOcomponent = new OptOCubeSplitter(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "modified_rhomboid_prism") {
     OptOcomponent = new OptOModifiedRhomboidPrism(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "pseudo_pentaprism" || optoType == "optical_square") {
     OptOcomponent = new OptOOpticalSquare(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "lens") {
     OptOcomponent = new OptOLens(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "Risley_prism") {
     OptOcomponent = new OptORisleyPrism(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "sensor2D") {
     OptOcomponent = new OptOSensor2D(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "distancemeter" || optoType == "distancemeter1dim") {
     OptOcomponent = new OptODistancemeter(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "distancemeter3dim") {
     OptOcomponent = new OptODistancemeter3dim(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "distance_target") {
     OptOcomponent = new OptOScreen(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "tiltmeter") {
     OptOcomponent = new OptOTiltmeter(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "pinhole") {
     OptOcomponent = new OptOPinhole(this, optoType, optoName, fcopyComponents);
   } else if (optoType == "COPS") {
     OptOcomponent = new OptOCOPS(this, optoType, optoName, fcopyComponents);
   } else {
     OptOcomponent =
         //o       new OpticalObject( this, optoType, optoName, fcopyComponents );
         new OptOUserDefined(this, optoType, optoName, fcopyComponents);
   }
 
   return OptOcomponent;
 }

◆ defaultBehaviour()

void OpticalObject::defaultBehaviour	(	LightRay &	lightray,
		Measurement &	meas
	)

virtual

Reimplemented in OptOSource, OptOCOPS, OptOMirror, OptOSensor2D, OptODistancemeter, OptODistancemeter3dim, OptOLaser, OptOPinhole, OptOScreen, OptOTiltmeter, and OptOXLaser.

Definition at line 873 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                                           {
   std::cerr << "!!! Optical Object " << name() << " of type " << type() << " does not implement a default behaviour"
             << std::endl;
   std::cerr << " You have to specify some behaviour, like :D or :T or ..." << std::endl;
   exit(1);
 }

◆ detailedDeviatesLightRay()

void OpticalObject::detailedDeviatesLightRay ( LightRay & lightray )

virtual

Reimplemented in OptOCubeSplitter, OptOModifiedRhomboidPrism, OptOOpticalSquare, OptOMirror, and OptOPlateSplitter.

Definition at line 903 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                                {
   std::cerr << "!!! Optical Object " << name() << " of type " << type()
             << " does not implement detailed deviation (:DD / :D)" << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

◆ detailedTraversesLightRay()

void OpticalObject::detailedTraversesLightRay ( LightRay & lightray )

virtual

Reimplemented in OptOMirror, OptOSensor2D, OptOCubeSplitter, OptOModifiedRhomboidPrism, OptOOpticalSquare, and OptOPlateSplitter.

Definition at line 913 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                                 {
   std::cerr << "!!! Optical Object " << name() << " of type " << type()
             << " does not implement detailed traversing of light ray (:DT / :T)" << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

◆ diff2pi()

double OpticalObject::diff2pi	(	double	ang1,
		double	ang2
	)

Definition at line 1800 of file OpticalObject.cc.

References change_name::diff, createfilelist::int, and M_PI.

Referenced by eq2ang().

                                                       {
   double diff = fabs(ang1 - ang2);
   diff = diff - int(diff / 2. / M_PI) * 2 * M_PI;
   return diff;
 }

◆ displaceCentreGlob() [1/2]

void OpticalObject::displaceCentreGlob	(	const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1000 of file OpticalObject.cc.

References centreGlobOriginal(), gather_cfg::cout, ALIUtils::debug, Model::getComponentOptOs(), getDispVec(), name(), and theCentreGlob.

Referenced by EntryLengthAffCentre::displace().

                                                                                {
   if (ALIUtils::debug >= 5)
     std::cout << name() << " displaceCentreGlob: coor " << coor << " disp = " << disp << std::endl;
 
   theCentreGlob = centreGlobOriginal();
   CLHEP::Hep3Vector dispVec = getDispVec(coor, disp);
   theCentreGlob += dispVec;
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   ALIbool igetood = Model::getComponentOptOs(name(), vopto);
   if (!igetood) {
     //    std::cout << " NO MORE COMPONENTS IN THIS OptO" << name() << std::endl ;
     return;
   }
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlob(dispVec);
   }
 }

◆ displaceCentreGlob() [2/2]

void OpticalObject::displaceCentreGlob ( const CLHEP::Hep3Vector & dispVec )

Definition at line 1046 of file OpticalObject.cc.

References centreGlobOriginal(), gather_cfg::cout, ALIUtils::debug, Model::getComponentOptOs(), name(), and theCentreGlob.

                                                                      {
   if (ALIUtils::debug >= 5)
     std::cout << name() << " displaceCentreGlob: dispVec = " << dispVec << std::endl;
 
   theCentreGlob = centreGlobOriginal();
   theCentreGlob += dispVec;
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   ALIbool igetood = Model::getComponentOptOs(name(), vopto);
   if (!igetood) {
     return;
   }
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlob(dispVec);
   }
 }

◆ displaceCentreGlobOriginal() [1/2]

void OpticalObject::displaceCentreGlobOriginal	(	const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1082 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), Model::getComponentOptOs(), getDispVec(), name(), and theCentreGlobOriginal.

Referenced by EntryLengthAffCentre::displaceOriginal().

                                                                                        {
   if (ALIUtils::debug >= 4)
     std::cout << "@@ OpticalObject::displaceCentreGloboriginal " << name() << " " << coor << " " << disp << std::endl;
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginal, "the centre glob original 0");
   CLHEP::Hep3Vector dispVec = getDispVec(coor, disp);
   theCentreGlobOriginal += dispVec;
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginal, "the centre glob original displaced");
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlobOriginal(dispVec);
   }
 }

◆ displaceCentreGlobOriginal() [2/2]

void OpticalObject::displaceCentreGlobOriginal ( const CLHEP::Hep3Vector & dispVec )

Definition at line 1105 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), Model::getComponentOptOs(), name(), and theCentreGlobOriginal.

                                                                              {
   if (ALIUtils::debug >= 4)
     std::cout << " OpticalObject::displaceCentreGloboriginal " << name() << " dispVec " << dispVec << std::endl;
 
   theCentreGlobOriginal += dispVec;
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginal, "the centre glob original");
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlobOriginal(dispVec);
   }
 }

◆ displaceCentreGlobOriginalOriginal() [1/2]

void OpticalObject::displaceCentreGlobOriginalOriginal	(	const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1124 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), Model::getComponentOptOs(), getDispVec(), name(), and theCentreGlobOriginalOriginal.

Referenced by EntryLengthAffCentre::displaceOriginalOriginal().

                                                                                                {
   if (ALIUtils::debug >= 4)
     std::cout << "@@ OpticalObject::displaceCentreGloboriginal " << name() << " " << coor << " " << disp << std::endl;
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginalOriginal, "the centre glob originalOriginal 0");
   CLHEP::Hep3Vector dispVec = getDispVec(coor, disp);
   theCentreGlobOriginalOriginal += dispVec;
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginalOriginal, "the centre glob original displaced");
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlobOriginalOriginal(dispVec);
   }
 }

◆ displaceCentreGlobOriginalOriginal() [2/2]

void OpticalObject::displaceCentreGlobOriginalOriginal ( const CLHEP::Hep3Vector & dispVec )

Definition at line 1147 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), Model::getComponentOptOs(), name(), and theCentreGlobOriginalOriginal.

                                                                                      {
   if (ALIUtils::debug >= 4)
     std::cout << " OpticalObject::displaceCentreGloboriginal " << name() << " dispVec " << dispVec << std::endl;
 
   theCentreGlobOriginalOriginal += dispVec;
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlobOriginalOriginal, "the centre glob original");
 
   //----------- Displace CentreGlob() of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceCentreGlobOriginalOriginal(dispVec);
   }
 }

◆ displaceExtraEntry()

void OpticalObject::displaceExtraEntry	(	const ALIuint	entryNo,
		const ALIdouble	disp
	)

Definition at line 1068 of file OpticalObject.cc.

References LogDebug, theExtraEntryValueOriginalVector, and theExtraEntryValueVector.

Referenced by Entry::displace().

                                                                                   {
   ALIdouble Pentry_orig_value = *(theExtraEntryValueOriginalVector.begin() + entryNo);
   ALIdouble Pentry_value = (Pentry_orig_value) + disp;
   LogDebug("OpticalObject::displaceExtraEntry")
       << " displaceExtraEntry " << Pentry_value << " <> " << Pentry_orig_value << std::endl;
   theExtraEntryValueVector[entryNo] = Pentry_value;
 }

◆ displaceExtraEntryOriginal()

void OpticalObject::displaceExtraEntryOriginal	(	const ALIuint	entryNo,
		const ALIdouble	disp
	)

Definition at line 1484 of file OpticalObject.cc.

References theExtraEntryValueOriginalVector.

Referenced by Entry::displaceOriginal().

                                                                                           {
   ALIdouble Pentry_orig_value = *(theExtraEntryValueOriginalVector.begin() + entryNo);
   Pentry_orig_value += disp;
   //  std::cout << " displaceExtraEntryOriginal " << *(theExtraEntryValueOriginalVector.begin() + entryNo) << " + " << disp << std::endl;
   theExtraEntryValueOriginalVector[entryNo] = Pentry_orig_value;
 }

◆ displaceExtraEntryOriginalOriginal()

void OpticalObject::displaceExtraEntryOriginalOriginal	(	const ALIuint	entryNo,
		const ALIdouble	disp
	)

Definition at line 1492 of file OpticalObject.cc.

References theExtraEntryValueOriginalOriginalVector.

Referenced by Entry::displaceOriginalOriginal().

                                                                                                   {
   ALIdouble Pentry_orig_value = *(theExtraEntryValueOriginalOriginalVector.begin() + entryNo);
   Pentry_orig_value += disp;
   //  std::cout << " displaceExtraEntryOriginalOriginal " << *(theExtraEntryValueOriginalOriginalVector.begin() + entryNo) << " + " << disp << std::endl;
   theExtraEntryValueOriginalOriginalVector[entryNo] = Pentry_orig_value;
 }

◆ displaceRmGlobAroundGlobal()

void OpticalObject::displaceRmGlobAroundGlobal	(	OpticalObject *	opto1stRotated,
		const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1169 of file OpticalObject.cc.

References centreGlob(), centreGlobOriginal(), gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), Model::getComponentOptOs(), name(), rmGlobOriginal(), rotateItAroundGlobal(), theCentreGlob, and theRmGlob.

Referenced by EntryAngleAffAngles::displace().

                                                                      {
   if (ALIUtils::debug >= 5)
     std::cout << name() << "DISPLACERMGLOBAROUNDGLOBAL" << coor << "disp" << disp << std::endl;
   //-------------------- Rotate rotation matrix
   theRmGlob = rmGlobOriginal();
   theCentreGlob = centreGlobOriginal();
   if (ALIUtils::debug >= 5) {
     std::cout << this->name() << std::endl;
     ALIUtils::dumprm(theRmGlob, "before disp rm ");
   }
   rotateItAroundGlobal(theRmGlob, coor, disp);
   if (ALIUtils::debug >= 5) {
     ALIUtils::dumprm(theRmGlob, "after disp rm ");
   }
   //-------------------- Rotation translate the centre of component OptO
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(centreGlob(), " centre_glob before rotation");
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(centreGlobOriginal(), "         centreGlobOriginal before rotation");
   if (opto1stRotated != this) {  //own _centre_glob is not displaced
     //---------- Distance to 1st rotated OptO
     CLHEP::Hep3Vector radiusOriginal = centreGlobOriginal() - opto1stRotated->centreGlobOriginal();
     CLHEP::Hep3Vector radius_rotated = radiusOriginal;
     rotateItAroundGlobal(radius_rotated, coor, disp);
     theCentreGlob = centreGlobOriginal() + (radius_rotated - radiusOriginal);
     if (ALIUtils::debug >= 5)
       ALIUtils::dump3v(centreGlob(), " centre_glob after rotation");
     if (ALIUtils::debug >= 5)
       ALIUtils::dump3v(centreGlobOriginal(), "         centre_globOriginal() after rotation");
   }
 
   //----------- Displace every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceRmGlobAroundGlobal(opto1stRotated, coor, disp);
   }
 }

◆ displaceRmGlobAroundLocal()

void OpticalObject::displaceRmGlobAroundLocal	(	OpticalObject *	opto1stRotated,
		const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1215 of file OpticalObject.cc.

References anglesIsGlobal, calculateLocalRotationAxisInGlobal(), centreGlob(), centreGlobOriginal(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), Model::getComponentOptOs(), getEntryRMangle(), name(), setGlobalCentre(), SetRMGlobFromRMLocal(), theRmGlob, XCoor, YCoor, and ZCoor.

Referenced by EntryAngleAffAngles::displace().

                                                                                                                      {
   if (anglesIsGlobal) {
     std::cerr << "!!!FATAL ERROR: angles in global coordinates not supported momentarily if 'rotateAroundGlobal' is "
                  "set as a Global Option "
               << std::endl;
     abort();
   }
 
   if (ALIUtils::debug >= 5)
     std::cout << name() << " DISPLACE_RMGLOB_AROUND_LOCAL " << coor << " disp " << disp << std::endl;
   //---------- Build the rmGlob and centreGlob again, with displacement values
   //----- Local rotation is build with entry values plus displacement
   theRmGlob = CLHEP::HepRotation();
   //---------- Set global rotation matrix
   //-------- Get rm from Entries
   if (coor == XCoor) {
     theRmGlob.rotateX(getEntryRMangle(XCoor) + disp);
     if (ALIUtils::debug >= 5)
       std::cout << " rmglob rotated around x " << getEntryRMangle(XCoor) + disp << std::endl;
   } else {
     theRmGlob.rotateX(getEntryRMangle(XCoor));
   }
   if (ALIUtils::debug >= 4) {
     ALIUtils::dumprm(theRmGlob, "displaceRmGlobAroundLocal: rm local after X ");
   }
 
   //-  std::cout << name() << " " << coor << " " << XCoor << " getEntryRMangle(coor) )" << getEntryRMangle(coor) << std::endl;
   if (coor == YCoor) {
     theRmGlob.rotateY(getEntryRMangle(YCoor) + disp);
     if (ALIUtils::debug >= 5)
       std::cout << " rmglob rotated around y " << getEntryRMangle(YCoor) + disp << std::endl;
   } else {
     theRmGlob.rotateY(getEntryRMangle(YCoor));
   }
   if (ALIUtils::debug >= 4) {
     std::cout << "  getEntryRMangle(YCoor) " << getEntryRMangle(YCoor) << std::endl;
     ALIUtils::dumprm(theRmGlob, "displaceRmGlobAroundLocal: rm local after Y ");
   }
 
   if (coor == ZCoor) {
     theRmGlob.rotateZ(getEntryRMangle(ZCoor) + disp);
     if (ALIUtils::debug >= 5)
       std::cout << " rmglob rotated around z " << getEntryRMangle(ZCoor) + disp << std::endl;
   } else {
     theRmGlob.rotateZ(getEntryRMangle(ZCoor));
   }
   if (ALIUtils::debug >= 4) {
     std::cout << "  getEntryRMangle(ZCoor) " << getEntryRMangle(ZCoor) << std::endl;
     ALIUtils::dumprm(theRmGlob, "SetRMLocalFromEntryValues: RM ");
   }
 
   //-  theCentreGlob = CLHEP::Hep3Vector(0.,0.,0.);
   if (ALIUtils::debug >= 5 && disp != 0) {
     std::cout << this->name() << std::endl;
     ALIUtils::dumprm(theRmGlob, "displaceRmGlobAroundLocal: rm local ");
   }
 
   if (!anglesIsGlobal) {
     SetRMGlobFromRMLocal();
   }
 
   //----- calculate local rot axis with new rm glob
   calculateLocalRotationAxisInGlobal();
 
   //-  theCentreGlob = CLHEP::Hep3Vector(0.,0.,0.);
   if (ALIUtils::debug >= 5 && disp != 0) {
     std::cout << this->name() << std::endl;
     ALIUtils::dumprm(theRmGlob, "displaceRmGlobAroundLocal: rm global ");
   }
 
   if (opto1stRotated != this) {  //own _centre_glob doesn't rotate
     setGlobalCentre();
     if (ALIUtils::debug >= 5) {
       ALIUtils::dump3v(centreGlob(), " centre_glob after rotation");
       ALIUtils::dump3v(centreGlobOriginal(), "         centre_globOriginal() after rotation");
     }
   }
 
   //----------- Displace every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->displaceRmGlobAroundLocal(opto1stRotated, coor, 0.);
     //for aroundglobal all components are explicitly rotated disp, for aroundLocal, they will be rotated automatically if the parent is rotated, as the rmGlob is built from scratch
   }
 }

◆ displaceRmGlobOriginal()

void OpticalObject::displaceRmGlobOriginal	(	const OpticalObject *	opto1stRotated,
		const XYZcoor	coor,
		const ALIdouble	disp
	)

!temporary, theRmGlobOriginal should disappear

Definition at line 1315 of file OpticalObject.cc.

References centreGlob(), centreGlobOriginal(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), beamvalidation::exit(), Model::getComponentOptOs(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), name(), setGlobalCoordinates(), theCentreGlob, theCentreGlobOriginal, theRmGlob, and theRmGlobOriginal.

Referenced by EntryAngleAffAngles::displaceOriginal().

                                                                  {
   if (ALIUtils::debug >= 9)
     std::cout << name() << " DISPLACEORIGRMGLOB " << coor << " disp " << disp << std::endl;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   if (gomgr->GlobalOptions()["rotateAroundLocal"] == 0) {
     //-------------------- Rotate rotation matrix
     if (ALIUtils::debug >= 5)
       ALIUtils::dumprm(theRmGlobOriginal, name() + ALIstring(" theRmGlobOriginal before displaced "));
     switch (coor) {
       case 0:
         theRmGlobOriginal.rotateX(disp);
         break;
       case 1:
         theRmGlobOriginal.rotateY(disp);
         break;
       case 2:
         theRmGlobOriginal.rotateZ(disp);
         break;
       default:
         std::cerr << "!!! DISPLACERMGLOB coordinate should be 0-2, not " << coor << std::endl;
         exit(2);
     }
 
     //-------------------- Rotation translate the centre of component OptO
     if (ALIUtils::debug >= 98)
       ALIUtils::dump3v(centreGlob(), "angles rotate centre_glob");
     if (ALIUtils::debug >= 98)
       ALIUtils::dump3v(centreGlobOriginal(), "         centreGlobOriginal");
     if (opto1stRotated != this) {  //own _centre_glob doesn't rotate
       //---------- Distance to 1st rotated OptO
       CLHEP::Hep3Vector radiusOriginal = centreGlobOriginal() - opto1stRotated->centreGlobOriginal();
       CLHEP::Hep3Vector radius_rotated = radiusOriginal;
       switch (coor) {
         case 0:
           radius_rotated.rotateX(disp);
           break;
         case 1:
           radius_rotated.rotateY(disp);
           break;
         case 2:
           radius_rotated.rotateZ(disp);
           break;
         default:
           break;  // already exited in previous switch
       }
       theCentreGlobOriginal = centreGlobOriginal() + (radius_rotated - radiusOriginal);
       if (ALIUtils::debug >= 98)
         ALIUtils::dump3v(centreGlob(), "angle rotate centre_glob");
       if (ALIUtils::debug >= 98)
         ALIUtils::dump3v(centreGlobOriginal(), "         centre_globOriginal()");
     }
 
     if (ALIUtils::debug >= 5)
       ALIUtils::dumprm(theRmGlobOriginal, name() + ALIstring(" theRmGlobOriginal displaced "));
 
     //----------- Displace every OptO component
     std::vector<OpticalObject*> vopto;
     Model::getComponentOptOs(name(), vopto);
     std::vector<OpticalObject*>::const_iterator vocite;
     for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
       (*vocite)->displaceRmGlobOriginal(opto1stRotated, coor, disp);
     }
 
   } else {
     setGlobalCoordinates();
     theCentreGlobOriginal = theCentreGlob;
     theRmGlobOriginal = theRmGlob;  
     //----------- Displace every OptO component
     std::vector<OpticalObject*> vopto;
     Model::getComponentOptOs(name(), vopto);
     std::vector<OpticalObject*>::const_iterator vocite;
     for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
       (*vocite)->displaceRmGlobOriginal(opto1stRotated, coor, disp);
     }
     if (ALIUtils::debug >= 5) {
       ALIUtils::dump3v(theCentreGlob, " displaceRmGlobOriginal ");
       ALIUtils::dumprm(theRmGlob, " displaceRmGlobOriginal ");
     }
   }
 }

◆ displaceRmGlobOriginalOriginal()

void OpticalObject::displaceRmGlobOriginalOriginal	(	const OpticalObject *	opto1stRotated,
		const XYZcoor	coor,
		const ALIdouble	disp
	)

!temporary, theRmGlobOriginalOriginal should disappear

Definition at line 1399 of file OpticalObject.cc.

References centreGlob(), centreGlobOriginalOriginal(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), beamvalidation::exit(), Model::getComponentOptOs(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), name(), setGlobalCoordinates(), theCentreGlob, theCentreGlobOriginalOriginal, theRmGlob, and theRmGlobOriginalOriginal.

Referenced by EntryAngleAffAngles::displaceOriginalOriginal().

                                                                          {
   if (ALIUtils::debug >= 9)
     std::cout << name() << " DISPLACEORIGRMGLOB " << coor << " disp " << disp << std::endl;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   if (gomgr->GlobalOptions()["rotateAroundLocal"] == 0) {
     //-------------------- Rotate rotation matrix
     if (ALIUtils::debug >= 5)
       ALIUtils::dumprm(theRmGlobOriginalOriginal, name() + ALIstring(" theRmGlobOriginalOriginal before displaced"));
     switch (coor) {
       case 0:
         theRmGlobOriginalOriginal.rotateX(disp);
         break;
       case 1:
         theRmGlobOriginalOriginal.rotateY(disp);
         break;
       case 2:
         theRmGlobOriginalOriginal.rotateZ(disp);
         break;
       default:
         std::cerr << "!!! DISPLACERMGLOB coordinate should be 0-2, not " << coor << std::endl;
         exit(2);
     }
 
     //-------------------- Rotation translate the centre of component OptO
     if (ALIUtils::debug >= 98)
       ALIUtils::dump3v(centreGlob(), "angles rotate centre_glob");
     if (ALIUtils::debug >= 98)
       ALIUtils::dump3v(centreGlobOriginalOriginal(), "         centreGlobOriginalOriginal");
     if (opto1stRotated != this) {  //own _centre_glob doesn't rotate
       //---------- Distance to 1st rotated OptO
       CLHEP::Hep3Vector radiusOriginalOriginal =
           centreGlobOriginalOriginal() - opto1stRotated->centreGlobOriginalOriginal();
       CLHEP::Hep3Vector radius_rotated = radiusOriginalOriginal;
       switch (coor) {
         case 0:
           radius_rotated.rotateX(disp);
           break;
         case 1:
           radius_rotated.rotateY(disp);
           break;
         case 2:
           radius_rotated.rotateZ(disp);
           break;
         default:
           break;  // already exited in previous switch
       }
       theCentreGlobOriginalOriginal = centreGlobOriginalOriginal() + (radius_rotated - radiusOriginalOriginal);
       if (ALIUtils::debug >= 98)
         ALIUtils::dump3v(centreGlob(), "angle rotate centre_glob");
       if (ALIUtils::debug >= 98)
         ALIUtils::dump3v(centreGlobOriginalOriginal(), "         centre_globOriginalOriginal()");
     }
 
     if (ALIUtils::debug >= 5)
       ALIUtils::dumprm(theRmGlobOriginalOriginal, name() + ALIstring(" theRmGlobOriginalOriginal displaced "));
 
     //----------- Displace every OptO component
     std::vector<OpticalObject*> vopto;
     Model::getComponentOptOs(name(), vopto);
     std::vector<OpticalObject*>::const_iterator vocite;
     for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
       (*vocite)->displaceRmGlobOriginalOriginal(opto1stRotated, coor, disp);
     }
 
   } else {
     setGlobalCoordinates();
     theCentreGlobOriginalOriginal = theCentreGlob;
     theRmGlobOriginalOriginal = theRmGlob;  
     //----------- Displace every OptO component
     std::vector<OpticalObject*> vopto;
     Model::getComponentOptOs(name(), vopto);
     std::vector<OpticalObject*>::const_iterator vocite;
     for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
       (*vocite)->displaceRmGlobOriginalOriginal(opto1stRotated, coor, disp);
     }
     if (ALIUtils::debug >= 5) {
       ALIUtils::dump3v(theCentreGlob, " displaceRmGlobOriginalOriginal ");
       ALIUtils::dumprm(theRmGlob, " displaceRmGlobOriginalOriginal ");
     }
   }
 }

◆ eq2ang()

bool OpticalObject::eq2ang	(	double	ang1,
		double	ang2
	)

Definition at line 1807 of file OpticalObject.cc.

References change_name::diff, diff2pi(), and M_PI.

Referenced by checkMatrixEquations().

                                                    {
   bool beq = true;
 
   double diff = diff2pi(ang1, ang2);
   if (diff > 0.00001) {
     if (fabs(diff - 2 * M_PI) > 0.00001) {
       //-      std::cout << " diff " << diff << " " << ang1 << " " << ang2 << std::endl;
       beq = false;
     }
   }
 
   return beq;
 }

◆ ExtraEntryList()

const std::vector<Entry*>& OpticalObject::ExtraEntryList ( ) const

inline

Definition at line 65 of file OpticalObject.h.

References theExtraEntryVector.

Referenced by Measurement::addAffectingEntriesFromOptO(), copyData(), Model::deleteOptO(), extraEntryNo(), Fit::findEntryFitPosition(), CocoaDBMgr::GetOptAlignInfoFromOptO(), resetOriginalOriginalCoordinates(), CocoaToDDLMgr::specPar(), and OptOUserDefined::userDefinedBehaviour().

65 { return theExtraEntryVector; }

OpticalObject::theExtraEntryVector

std::vector< Entry * > theExtraEntryVector

Definition: OpticalObject.h:294

◆ extraEntryNo()

const ALIint OpticalObject::extraEntryNo ( const ALIstring & entry_name ) const

Definition at line 1500 of file OpticalObject.cc.

References ExtraEntryList().

Referenced by Entry::displace(), Entry::displaceOriginal(), Entry::displaceOriginalOriginal(), findExtraEntryValue(), findExtraEntryValueIfExists(), findExtraEntryValueMustExist(), and Entry::valueDisplaced().

                                                                           {
   //-  std::cout << ExtraEntryList().size() << "entry name " << entry_name << std::endl;
 
   std::vector<Entry*>::const_iterator vecite;
   for (vecite = ExtraEntryList().begin(); vecite != ExtraEntryList().end(); ++vecite) {
     //-    std::cout <<"in entryno" << (*vecite)->name() << entry_name << std::endl;
     if ((*vecite)->name() == entry_name) {
       return (vecite - ExtraEntryList().begin());
     }
     //-    std::cout <<"DD in entryno" << (*vecite)->name() << entry_name << std::endl;
   }
   //-  std::cout << "!!: extra entry name not found: " << entry_name << " in OptO " << name() << std::endl;
   //  exit(2);
   return ALIint(-1);
 }

◆ ExtraEntryValueList()

std::vector<ALIdouble>& OpticalObject::ExtraEntryValueList ( )

inline

Definition at line 67 of file OpticalObject.h.

References theExtraEntryValueVector.

Referenced by resetGlobalCoordinates(), resetOriginalOriginalCoordinates(), setOriginalEntryValues(), and Entry::valueDisplaced().

67 { return theExtraEntryValueVector; }

OpticalObject::theExtraEntryValueVector

std::vector< ALIdouble > theExtraEntryValueVector

Definition: OpticalObject.h:297

◆ ExtraEntryValueOriginalList()

const std::vector<ALIdouble>& OpticalObject::ExtraEntryValueOriginalList ( )

inline

Definition at line 69 of file OpticalObject.h.

References theExtraEntryValueOriginalVector.

Referenced by resetGlobalCoordinates(), and Entry::valueDisplaced().

69 { return theExtraEntryValueOriginalVector; }

OpticalObject::theExtraEntryValueOriginalVector

std::vector< ALIdouble > theExtraEntryValueOriginalVector

Definition: OpticalObject.h:298

◆ ExtraEntryValueOriginalOriginalList()

const std::vector<ALIdouble>& OpticalObject::ExtraEntryValueOriginalOriginalList ( )

inline

Definition at line 70 of file OpticalObject.h.

References theExtraEntryValueOriginalOriginalVector.

                                                                     {
     return theExtraEntryValueOriginalOriginalVector;
   }

◆ fastDeviatesLightRay()

void OpticalObject::fastDeviatesLightRay ( LightRay & lightray )

virtual

Reimplemented in OptOMirror, OptOPlateSplitter, OptOCubeSplitter, OptOModifiedRhomboidPrism, and OptOOpticalSquare.

Definition at line 883 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                            {
   std::cerr << "!!! Optical Object " << name() << " of type " << type() << " does not implement deviation (:D)"
             << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

◆ fastTraversesLightRay()

void OpticalObject::fastTraversesLightRay ( LightRay & lightray )

virtual

Reimplemented in OptOMirror, OptOCOPS, OptOPlateSplitter, OptOSensor2D, OptOCubeSplitter, OptOModifiedRhomboidPrism, and OptOOpticalSquare.

Definition at line 893 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                             {
   std::cerr << "!!! Optical Object " << name() << " of type " << type()
             << " does not implement the light traversing (:T)" << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

◆ fillCoordinateEntry()

void OpticalObject::fillCoordinateEntry	(	const ALIstring &	coor_name,
		const std::vector< ALIstring > &	wordlist
	)

private

Definition at line 314 of file OpticalObject.cc.

References addCoordinateEntryToList(), Model::addEntryToList(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, mps_splice::entry, beamvalidation::exit(), and name().

Referenced by constructFromOptAligInfo(), copyData(), and readCoordinates().

                                                                                                         {
   //---------- Select which type of entry to create
   Entry* entry = nullptr;
   if (coor_type == ALIstring("centre")) {
     entry = new EntryLengthAffCentre(coor_type);
   } else if (coor_type == ALIstring("angles")) {
     entry = new EntryAngleAffAngles(coor_type);
   } else {
     std::cerr << " !!! FATAL ERROR at  OpticalObject::fillCoordinateEntry : wrong coordinate type " << coor_type
               << std::endl;
     exit(1);
   }
 
   //---------- Set link from entry to OptO it belongs to
   entry->setOptOCurrent(this);
   //----- Name is filled from here to include 'centre' or 'angles'
   ALIstring name = coor_type + "_" + wordlist[0];
   entry->fillName(name);
   //---------- Fill entry with data read
   entry->fill(wordlist);
 
   //---------- Add entry to lists
   Model::addEntryToList(entry);
   addCoordinateEntryToList(entry);
 }

◆ fillExtraEntry()

void OpticalObject::fillExtraEntry ( std::vector< ALIstring > & wordlist )

protectedvirtual

Reimplemented in OptOSensor2D.

Definition at line 163 of file OpticalObject.cc.

References Model::addEntryToList(), addExtraEntryToList(), addExtraEntryValueToList(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dumpVS(), beamvalidation::exit(), Entry::fill(), Entry::fillName(), Entry::setOptOCurrent(), Entry::value(), and Entry::ValueDimensionFactor().

Referenced by constructFromOptAligInfo(), copyData(), OptOSensor2D::fillExtraEntry(), and readExtraEntries().

                                                                  {
   //- if(ALIUtils::debug >= 5) std::cout << "fillExtraEntry wordlist0 " << wordlist[0].c_str() << std::endl;
 
   //---------- Check which type of entry to create
   Entry* xentry;
   if (wordlist[0] == ALIstring("length")) {
     xentry = new EntryLength(wordlist[0]);
   } else if (wordlist[0] == ALIstring("angle")) {
     xentry = new EntryAngle(wordlist[0]);
   } else if (wordlist[0] == ALIstring("nodim")) {
     xentry = new EntryNoDim(wordlist[0]);
   } else {
     std::cerr << "!!ERROR: Exiting...  unknown type of Extra Entry " << wordlist[0] << std::endl;
     ALIUtils::dumpVS(wordlist, " Only 'length', 'angle' or 'nodim' are allowed ", std::cerr);
     exit(2);
   }
 
   if (ALIUtils::debug >= 99) {
     ALIUtils::dumpVS(wordlist, "fillExtraEntry: ", std::cout);
   }
   //---------- Erase first word of line read (type of entry)
   wordlist.erase(wordlist.begin());
 
   if (ALIUtils::debug >= 99) {
     ALIUtils::dumpVS(wordlist, "fillExtraEntry: ", std::cout);
   }
 
   //---------- Set link from entry to OptO it belongs to
   xentry->setOptOCurrent(this);
   //----- Name is filled from here to be consistent with fillCoordinate
   xentry->fillName(wordlist[0]);
   //---------- Fill entry with data in line read
   xentry->fill(wordlist);
 
   //---------- Add entry to entry lists
   Model::addEntryToList(xentry);
   addExtraEntryToList(xentry);
 
   if (ALIUtils::debug >= 5)
     std::cout << "fillExtraEntry: xentry_value" << xentry->value() << xentry->ValueDimensionFactor() << std::endl;
 
   //---------- Add entry value to list
   addExtraEntryValueToList(xentry->value());
 }

◆ fillIguana()

virtual void OpticalObject::fillIguana ( )

inlinevirtual

Definition at line 55 of file OpticalObject.h.

55 {};

◆ fillVRML()

virtual void OpticalObject::fillVRML ( )

inlinevirtual

Definition at line 54 of file OpticalObject.h.

54 {};

◆ findExtraEntryValue()

const ALIdouble OpticalObject::findExtraEntryValue ( const ALIstring & eename ) const

Definition at line 1519 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, RPCNoise_example::check, gather_cfg::cout, ALIUtils::debug, beamvalidation::exit(), extraEntryNo(), GlobalOptionMgr::getGlobalOptionValue(), GlobalOptionMgr::getInstance(), name(), and theExtraEntryValueVector.

Referenced by OptOCubeSplitter::detailedDeviatesLightRay(), OptOCubeSplitter::detailedTraversesLightRay(), findExtraEntryValueIfExists(), findExtraEntryValueMustExist(), getPlate(), OptOCubeSplitter::getUpperPlate(), LightRay::shiftAndDeviateWhileTraversing(), and OptOUserDefined::userDefinedBehaviour().

                                                                                 {
   ALIdouble retval;
   const ALIint entryNo = extraEntryNo(eename);
   if (entryNo >= 0) {
     const ALIdouble Pentry_value = *(theExtraEntryValueVector.begin() + entryNo);
     retval = (Pentry_value);
   } else {
     //    if(ALIUtils::debug >= 0) std::cerr << "!!Warning: entry not found; " << eename << ", in object " << name() << " returns 0. " << std::endl;
     ALIdouble check;
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     gomgr->getGlobalOptionValue("check_extra_entries", check);
     if (check == 1) {
       //    if( check <= 1) {//exit temporarily
       std::cerr << "!!OpticalObject:ERROR: entry not found; " << eename << ", in object " << name() << std::endl;
       exit(1);
     } else {
       //-      std::cerr << "!!temporal WARNING in OpticalObject::findExtraEntryValue: entry not found; " << eename << ", in object " << name() << std::endl;
       retval = 0.;
     }
   }
 
   if (ALIUtils::debug >= 5)
     std::cout << " OpticalObject::findExtraEntryValue: " << eename << " = " << retval << std::endl;
   return retval;
 }

◆ findExtraEntryValueIfExists()

const ALIbool OpticalObject::findExtraEntryValueIfExists	(	const ALIstring &	eename,
		ALIdouble &	value
	)		const

Definition at line 1563 of file OpticalObject.cc.

References extraEntryNo(), and findExtraEntryValue().

Referenced by OptOCubeSplitter::getMiddlePlate(), and OptOCOPS::makeMeasurement().

                                                                                                         {
   value = findExtraEntryValue(eename);
   const ALIint entryNo = extraEntryNo(eename);
   //-    std::cout << eename << " entryNo " << entryNo << " value " << value << std::endl;
   return (entryNo >= 0);
 }

◆ findExtraEntryValueMustExist()

const ALIdouble OpticalObject::findExtraEntryValueMustExist ( const ALIstring & eename ) const

Definition at line 1548 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, mps_splice::entry, beamvalidation::exit(), extraEntryNo(), findExtraEntryValue(), and name().

                                                                                          {
   ALIdouble entry = findExtraEntryValue(eename);
   const ALIint entryNo = extraEntryNo(eename);
   if (entryNo < 0) {
     std::cerr << "!!OpticalObject::findExtraEntryValueMustExist: ERROR: entry not found; " << eename << ", in object "
               << name() << std::endl;
     exit(1);
   }
   //  if(ALIUtils::debug >= 5)  std::cout << " OpticalObject::findExtraEntryValueMustExist: " << eename << " = " << entry << std::endl;
   return entry;
 }

◆ getCmsswID()

const ALIuint OpticalObject::getCmsswID ( ) const

inline

Definition at line 97 of file OpticalObject.h.

References theCmsswID.

Referenced by CocoaDBMgr::GetAlignInfoErrorFromOptO(), CocoaDBMgr::GetAlignInfoFromOptO(), CocoaDBMgr::GetOptAlignInfoFromOptO(), and CocoaToDDLMgr::specPar().

97 { return theCmsswID; }

OpticalObject::theCmsswID

ALIuint theCmsswID

Definition: OpticalObject.h:311

◆ getCoordinateFromOptAlignParam()

std::vector< ALIstring > OpticalObject::getCoordinateFromOptAlignParam ( const OpticalAlignParam & oaParam )

Definition at line 2064 of file OpticalObject.cc.

References ALIUtils::debug, ALIUtils::dumpVS(), OpticalAlignParam::name(), OpticalAlignParam::quality(), OpticalAlignParam::sigma(), and OpticalAlignParam::value().

Referenced by constructFromOptAligInfo().

                                                                                                    {
   char chartmp[20];
   std::vector<ALIstring> wordlist;
   wordlist.push_back(oaParam.name());
   gcvt(oaParam.value(), 10, chartmp);
   wordlist.push_back(chartmp);
   gcvt(oaParam.sigma(), 10, chartmp);
   wordlist.push_back(chartmp);
   if (oaParam.quality() == 0) {
     wordlist.push_back("fix");
   } else if (oaParam.quality() == 1) {
     wordlist.push_back("cal");
   } else if (oaParam.quality() == 2) {
     wordlist.push_back("unk");
   }
 
   if (ALIUtils::debug >= 5) {
     ALIUtils::dumpVS(wordlist, " getCoordinateFromOptAlignParam " + oaParam.name());
   }
 
   return wordlist;
 }

◆ getDisplacementInLocalCoordinates()

CLHEP::Hep3Vector OpticalObject::getDisplacementInLocalCoordinates	(	const XYZcoor	coor,
		const ALIdouble	disp
	)

Definition at line 1022 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, and beamvalidation::exit().

                                                                                                          {
   CLHEP::Hep3Vector dispVec;
   switch (coor) {
     case 0:
       dispVec = CLHEP::Hep3Vector(disp, 0., 0.);
       break;
     case 1:
       dispVec = CLHEP::Hep3Vector(0., disp, 0.);
       break;
     case 2:
       dispVec = CLHEP::Hep3Vector(0., 0., disp);
       break;
     default:
       std::cerr << "!!! DISPLACECENTREGLOB coordinate should be 0-2, not " << coor << std::endl;
       exit(2);
   }
 
   return dispVec;
 }

◆ getDispVec()

CLHEP::Hep3Vector OpticalObject::getDispVec	(	const XYZcoor	coor,
		const ALIdouble	disp
	)

private

Definition at line 1909 of file OpticalObject.cc.

References ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), parent(), and rmGlob().

Referenced by displaceCentreGlob(), displaceCentreGlobOriginal(), and displaceCentreGlobOriginalOriginal().

                                                                                   {
   CLHEP::Hep3Vector dispVec;
   switch (coor) {
     case 0:
       dispVec = CLHEP::Hep3Vector(disp, 0., 0.);
       break;
     case 1:
       dispVec = CLHEP::Hep3Vector(0., disp, 0.);
       break;
     case 2:
       dispVec = CLHEP::Hep3Vector(0., 0., disp);
       break;
     default:
       break;  // already exited in previous switch
   }
   //-  CLHEP::Hep3Vector dispVec = getDisplacementInLocalCoordinates( coor, disp);
   if (ALIUtils::debug >= 5) {
     ALIUtils::dump3v(dispVec, " dispVec in local ");
     CLHEP::HepRotation rmt = parent()->rmGlob();
     ALIUtils::dumprm(rmt, "parent rmGlob ");
   }
   dispVec = parent()->rmGlob() * dispVec;
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(dispVec, " dispVec in global ");
 
   return dispVec;
 }

◆ getEntryCentre() [1/2]

const double OpticalObject::getEntryCentre ( const XYZcoor coor ) const

Definition at line 1955 of file OpticalObject.cc.

References theCoordinateEntryVector, Entry::value(), and Entry::valueDisplacementByFitting().

Referenced by SetCentreLocalFromEntryValues().

                                                                    {
   Entry* ce = theCoordinateEntryVector[coor];
   //  std::cout << coor << " getEntryCentre " << ce->value() << " + " << ce->valueDisplacementByFitting() << std::endl;
   return ce->value() + ce->valueDisplacementByFitting();
 }

◆ getEntryCentre() [2/2]

const double OpticalObject::getEntryCentre ( const ALIstring & coor ) const

Definition at line 1962 of file OpticalObject.cc.

References theCoordinateEntryVector, Entry::value(), Entry::valueDisplacementByFitting(), XCoor, YCoor, and ZCoor.

                                                                          {
   XYZcoor coor = XCoor;
   if (coorstr == "X") {
     coor = XCoor;
   } else if (coorstr == "Y") {
     coor = YCoor;
   } else if (coorstr == "Z") {
     coor = ZCoor;
   }
   Entry* ce = theCoordinateEntryVector[coor];
   //  std::cout << coor << " getEntryCentre " << ce->value() << " + " << ce->valueDisplacementByFitting() << std::endl;
   return ce->value() + ce->valueDisplacementByFitting();
 }

◆ getEntryRMangle() [1/2]

const double OpticalObject::getEntryRMangle ( const XYZcoor coor ) const

Definition at line 1977 of file OpticalObject.cc.

References theCoordinateEntryVector, Entry::value(), and Entry::valueDisplacementByFitting().

Referenced by buildRmFromEntryValuesOriginalOriginal(), displaceRmGlobAroundLocal(), FittedEntriesReader::readFittedEntriesFromFile(), SetRMGlobFromRMLocal(), and SetRMLocalFromEntryValues().

                                                                     {
   Entry* ce = theCoordinateEntryVector[coor + 3];
   //  std::cout << coor << " getEntryRMangle " << ce->value() << " + " << ce->valueDisplacementByFitting() << " size = " << theCoordinateEntryVector.size() << " ce = " << ce << " entry name " << ce->name() << " opto name " << name() << std::endl;
 
   return ce->value() + ce->valueDisplacementByFitting();
 }

◆ getEntryRMangle() [2/2]

const double OpticalObject::getEntryRMangle ( const ALIstring & coor ) const

Definition at line 1985 of file OpticalObject.cc.

References theCoordinateEntryVector, Entry::value(), Entry::valueDisplacementByFitting(), XCoor, YCoor, and ZCoor.

                                                                           {
   XYZcoor coor = XCoor;
   if (coorstr == "X") {
     coor = XCoor;
   } else if (coorstr == "Y") {
     coor = YCoor;
   } else if (coorstr == "Z") {
     coor = ZCoor;
   }
   Entry* ce = theCoordinateEntryVector[coor + 3];
   //  std::cout << coor << " getEntryRMangle " << ce->value() << " + " << ce->valueDisplacementByFitting() << " size = " << theCoordinateEntryVector.size() << " ce = " << ce << " entry name " << ce->name() << " opto name " << name() << std::endl;
 
   return ce->value() + ce->valueDisplacementByFitting();
 }

◆ getLocalRotationAngles()

std::vector< double > OpticalObject::getLocalRotationAngles ( const std::vector< Entry *> & entries ) const

Definition at line 1679 of file OpticalObject.cc.

References getRotationAnglesInOptOFrame(), and theParent.

Referenced by CocoaDBMgr::GetOptAlignInfoFromOptO().

                                                                                               {
   return getRotationAnglesInOptOFrame(theParent, entries);
 }

◆ getMaterial()

CocoaMaterialElementary* OpticalObject::getMaterial ( ) const

inline

Definition at line 217 of file OpticalObject.h.

References theMaterial.

Referenced by CocoaToDDLMgr::lv().

217 { return theMaterial; }

OpticalObject::theMaterial

CocoaMaterialElementary * theMaterial

Definition: OpticalObject.h:314

◆ getPlate()

ALIPlane OpticalObject::getPlate	(	const ALIbool	forwardPlate,
		const ALIbool	applyWedge
	)

Definition at line 946 of file OpticalObject.cc.

References centreGlob(), gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), findExtraEntryValue(), name(), rmGlob(), and ApeEstimator_cff::width.

Referenced by OptOCubeSplitter::detailedDeviatesLightRay(), OptOCubeSplitter::detailedTraversesLightRay(), OptOCubeSplitter::fastTraversesLightRay(), and OptOUserDefined::userDefinedBehaviour().

                                                                                      {
   if (ALIUtils::debug >= 4)
     std::cout << "% LR: GET PLATE " << name() << " forward= " << forwardPlate << std::endl;
   //---------- Get OptO variables
   const ALIdouble width = (findExtraEntryValue("width"));
 
   //---------- Get centre and normal of plate
   //----- Get plate normal before wedge (Z axis of OptO)
   CLHEP::Hep3Vector ZAxis(0., 0., 1.);
   CLHEP::HepRotation rmt = rmGlob();
   CLHEP::Hep3Vector plate_normal = rmt * ZAxis;
 
   //----- plate centre = OptO centre +/- 1/2 width before wedge
   CLHEP::Hep3Vector plate_point = centreGlob();
   //--- Add to it half of the width following the direction of the plate normal. -1/2 if it is forward plate, +1/2 if it is backward plate
   ALIdouble normal_sign = -forwardPlate * 2 + 1;
   plate_point += normal_sign * width / 2. * plate_normal;
   //-  if (ALIUtils::debug >= 4) std::cout << "width = " << width <<std::endl;
   if (ALIUtils::debug >= 3) {
     ALIUtils::dump3v(plate_point, "plate_point");
     ALIUtils::dump3v(plate_normal, "plate_normal before wedge");
     ALIUtils::dumprm(rmt, "rmt before wedge");
   }
 
   if (applyWedge) {
     ALIdouble wedge;
     wedge = findExtraEntryValue("wedge");
     if (wedge != 0.) {
       //---------- Rotate plate normal by 1/2 wedge angles
       CLHEP::Hep3Vector XAxis(1., 0., 0.);
       XAxis = rmt * XAxis;
       plate_normal.rotate(normal_sign * wedge / 2., XAxis);
       if (ALIUtils::debug >= 3)
         ALIUtils::dump3v(plate_normal, "plate_normal after wedgeX ");
       if (ALIUtils::debug >= 4)
         ALIUtils::dump3v(XAxis, "X Axis for applying wedge ");
       CLHEP::Hep3Vector YAxis(0., 1., 0.);
       YAxis = rmt * YAxis;
       plate_normal.rotate(normal_sign * wedge / 2., YAxis);
       if (ALIUtils::debug >= 3)
         ALIUtils::dump3v(plate_normal, "plate_normal after wedgeY ");
       if (ALIUtils::debug >= 4)
         ALIUtils::dump3v(YAxis, "Y Axis for applying wedge ");
     }
   }
 
   //---------- Return plate plane
   return ALIPlane(plate_point, plate_normal);
 }

◆ getRotationAnglesFromMatrix()

std::vector< double > OpticalObject::getRotationAnglesFromMatrix	(	CLHEP::HepRotation &	rmLocal,
		const std::vector< Entry *> &	entries
	)		const

Definition at line 1710 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::getRotationAnglesFromMatrix(), and rmLocal().

Referenced by getRotationAnglesInOptOFrame(), and EntryAngleAffAngles::valueDisplaced().

                                                                                                        {
   std::vector<double> newang(3);
   double angleX = entries[3]->value() + entries[3]->valueDisplacementByFitting();
   double angleY = entries[4]->value() + entries[4]->valueDisplacementByFitting();
   double angleZ = entries[5]->value() + entries[5]->valueDisplacementByFitting();
   if (ALIUtils::debug >= 5) {
     std::cout << " angles as value entries: X= " << angleX << " Y= " << angleY << " Z " << angleZ << std::endl;
   }
   return ALIUtils::getRotationAnglesFromMatrix(rmLocal, angleX, angleY, angleZ);
 }

◆ getRotationAnglesInOptOFrame()

std::vector< double > OpticalObject::getRotationAnglesInOptOFrame	(	const OpticalObject *	optoAncestor,
		const std::vector< Entry *> &	entries
	)		const

Definition at line 1684 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIUtils::dumprm(), beamvalidation::exit(), getRotationAnglesFromMatrix(), name(), rmGlob(), rmLocal(), theRmGlob, and theRmGlobOriginal.

Referenced by getLocalRotationAngles(), and Fit::printRotationAnglesInOptOFrame().

                                                                                                         {
   const CLHEP::HepRotation& rmParent = optoAncestor->rmGlob();  //ORIGINAL ?????????????????
   CLHEP::HepRotation rmLocal = rmParent.inverse() * theRmGlob;
 
   //I was using theRmGlobOriginal, assuming it has been set to theRmGlob already, check it, in case it may have other consequences
   if (theRmGlobOriginal != theRmGlob) {
     std::cerr << " !!!FATAL ERROR: OpticalObject::getRotationAnglesInOptOFrame   theRmGlobOriginal != theRmGlob "
               << std::endl;
     ALIUtils::dumprm(theRmGlobOriginal, " theRmGlobOriginal ");
     ALIUtils::dumprm(theRmGlob, " theRmGlob ");
     exit(1);
   }
 
   if (ALIUtils::debug >= 5) {
     std::cout << " OpticalObject::getRotationAnglesInOptOFrame " << name() << " optoAncestor " << optoAncestor->name()
               << std::endl;
     ALIUtils::dumprm(rmParent, " rm parent ");
     ALIUtils::dumprm(rmLocal, " rm local ");
     ALIUtils::dumprm(theRmGlobOriginal, " theRmGlobOriginal ");
     ALIUtils::dumprm(theRmGlob, " theRmGlob ");
   }
   return getRotationAnglesFromMatrix(rmLocal, entries);
 }

◆ getSolidShape()

CocoaSolidShape* OpticalObject::getSolidShape ( ) const

inline

Definition at line 218 of file OpticalObject.h.

References theSolidShape.

218 { return theSolidShape; }

OpticalObject::theSolidShape

CocoaSolidShape * theSolidShape

Definition: OpticalObject.h:315

◆ getZAxis()

CLHEP::Hep3Vector OpticalObject::getZAxis ( )

inline

Definition at line 143 of file OpticalObject.h.

References rmGlob().

                              {
     CLHEP::Hep3Vector ZAxis(0., 0., 1.);
     CLHEP::HepRotation rmt = rmGlob();
     ZAxis = rmt * ZAxis;
     return ZAxis;
   }

◆ ID()

const ALIuint OpticalObject::ID ( ) const

inline

Definition at line 96 of file OpticalObject.h.

References theCmsswID.

96 { return theCmsswID; }

OpticalObject::theCmsswID

ALIuint theCmsswID

Definition: OpticalObject.h:311

◆ longName()

const ALIstring OpticalObject::longName ( ) const

inline

Definition at line 196 of file OpticalObject.h.

References name().

Referenced by buildRmFromEntryValuesOriginalOriginal(), Fit::dumpFittedValuesInAllAncestorFrames(), Entry::fill(), readCoordinates(), OpticalObjectMgr::registerMe(), and SetRMGlobFromRMLocal().

196 { return name(); }

OpticalObject::name

const ALIstring & name() const

Definition: OpticalObject.h:58

◆ makeMeasurement()

void OpticalObject::makeMeasurement	(	LightRay &	lightray,
		Measurement &	meas
	)

virtual

Reimplemented in OptOCOPS, OptODistancemeter, OptODistancemeter3dim, OptOSensor2D, and OptOTiltmeter.

Definition at line 923 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                                          {
   std::cerr << "!!! Optical Object " << name() << " of type " << type() << " does not implement making measurement (:M)"
             << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

◆ meas()

Measurement* OpticalObject::meas ( )

inline

Definition at line 200 of file OpticalObject.h.

References theCurrentMeas.

Referenced by OptODistancemeter::defaultBehaviour(), OptODistancemeter3dim::defaultBehaviour(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), participateInMeasurement(), setMeas(), and OptOUserDefined::userDefinedBehaviour().

200 { return theCurrentMeas; }

OpticalObject::theCurrentMeas

Measurement * theCurrentMeas

Definition: OpticalObject.h:305

◆ name()

const ALIstring& OpticalObject::name ( ) const

inline

Definition at line 58 of file OpticalObject.h.

References theName.

Referenced by config.CFG::__str__(), Measurement::addAffectingEntriesFromOptO(), Entry::addFittedDisplacementToValue(), Measurement::buildOptOList(), buildRmFromEntryValuesOriginalOriginal(), calculateLocalRotationAxisInGlobal(), construct(), copyData(), createComponentOptOs(), createNewOptO(), OptOPinhole::defaultBehaviour(), defaultBehaviour(), Model::deleteOptO(), OptOCubeSplitter::detailedDeviatesLightRay(), detailedDeviatesLightRay(), OptOCubeSplitter::detailedTraversesLightRay(), detailedTraversesLightRay(), validation.Sample::digest(), displaceCentreGlob(), displaceCentreGlobOriginal(), displaceCentreGlobOriginalOriginal(), displaceRmGlobAroundGlobal(), displaceRmGlobAroundLocal(), displaceRmGlobOriginal(), displaceRmGlobOriginalOriginal(), OptOCubeSplitter::fastDeviatesLightRay(), fastDeviatesLightRay(), OptOCubeSplitter::fastTraversesLightRay(), fastTraversesLightRay(), fillCoordinateEntry(), Model::fillCopyComponentList(), Entry::fillFromInputFileQuality(), Entry::fillFromReportOutFileValue(), findExtraEntryValue(), findExtraEntryValueMustExist(), CocoaDBMgr::GetAlignInfoErrorFromOptO(), CocoaDBMgr::GetAlignInfoFromOptO(), Model::getComponentOptOs(), OptOCubeSplitter::getMiddlePlate(), CocoaDBMgr::GetOptAlignInfoFromOptO(), getPlate(), Measurement::getPreviousOptO(), getRotationAnglesInOptOFrame(), OptOCubeSplitter::getUpperPlate(), VIDSelectorBase.VIDSelectorBase::initialize(), LightRay::LightRay(), Entry::longName(), longName(), CocoaToDDLMgr::lv(), OptODistancemeter3dim::makeMeasurement(), OptODistancemeter::makeMeasurement(), makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), Fit::printCentreInOptOFrame(), propagateGlobalRMOriginalOriginalChangeToChildren(), CocoaToDDLMgr::pv(), resetGlobalCoordinates(), resetOriginalOriginalCoordinates(), setAnglesNull(), SetCentreGlobFromCentreLocal(), setGlobalCoordinatesOfComponents(), setGlobalRMOriginalOriginal(), FittedEntriesSet::SetOptOEntries(), SetRMGlobFromRMLocal(), shortName(), CocoaToDDLMgr::specPar(), LightRay::startLightRay(), transformCylindrical2Cartesian(), OptOUserDefined::userDefinedBehaviour(), userDefinedBehaviour(), EntryAngleAffAngles::valueDisplaced(), EntryLengthAffCentre::valueDisplaced(), and Entry::valueDisplaced().

58 { return theName; };

OpticalObject::theName

ALIstring theName

Definition: OpticalObject.h:279

◆ parent()

const OpticalObject* OpticalObject::parent ( ) const

inline

Definition at line 60 of file OpticalObject.h.

References theParent.

Referenced by Measurement::addAffectingEntriesFromOptO(), buildRmFromEntryValuesOriginalOriginal(), centreLocal(), createNewOptO(), Fit::dumpFittedValues(), Fit::dumpFittedValuesInAllAncestorFrames(), getDispVec(), CocoaDBMgr::GetOptAlignInfoFromOptO(), CocoaToDDLMgr::pv(), SetCentreGlobFromCentreLocal(), setGlobalRMOriginalOriginal(), SetRMGlobFromRMLocal(), SetRMGlobFromRMLocalOriginalOriginal(), and EntryAngleAffAngles::valueDisplaced().

60 { return theParent; };

OpticalObject::theParent

OpticalObject * theParent

Definition: OpticalObject.h:277

◆ participateInMeasurement()

void OpticalObject::participateInMeasurement	(	LightRay &	lightray,
		Measurement &	meas,
		const ALIstring &	behav
	)

virtual

Reimplemented in OptOCameraDetector, OptOLens, and OptORisleyPrism.

Definition at line 850 of file OpticalObject.cc.

References defaultBehaviour(), detailedDeviatesLightRay(), detailedTraversesLightRay(), fastDeviatesLightRay(), fastTraversesLightRay(), makeMeasurement(), meas(), setMeas(), and userDefinedBehaviour().

                                                                                                           {
   //---------- see if light traverses or reflects
   setMeas(&meas);
   if (behav == " ") {
     defaultBehaviour(lightray, meas);
   } else if (behav == "D" || behav == "DD") {
     detailedDeviatesLightRay(lightray);
   } else if (behav == "T" || behav == "DT") {
     detailedTraversesLightRay(lightray);
   } else if (behav == "FD") {
     fastDeviatesLightRay(lightray);
   } else if (behav == "FT") {
     fastTraversesLightRay(lightray);
   } else if (behav == "M") {
     makeMeasurement(lightray, meas);
   } else {
     userDefinedBehaviour(lightray, meas, behav);
   }
 }

◆ propagateGlobalRMOriginalOriginalChangeToChildren()

void OpticalObject::propagateGlobalRMOriginalOriginalChangeToChildren	(	const CLHEP::HepRotation &	rmorioriold,
		const CLHEP::HepRotation &	rmoriorinew
	)

Definition at line 652 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::dumprm(), Model::getComponentOptOs(), name(), rmGlobOriginalOriginal(), and theRmGlobOriginalOriginal.

                                                                                                            {
   std::cout << " propagateGlobalRMOriginalOriginalChangeToChildren OptO " << name() << std::endl;
   ALIUtils::dumprm(rmGlobOriginalOriginal(), " setGlobalRMOriginalOriginal old ");
   theRmGlobOriginalOriginal = rmoriorinew.inverse() * theRmGlobOriginalOriginal;
   theRmGlobOriginalOriginal = rmorioriold * theRmGlobOriginalOriginal;
   ALIUtils::dumprm(rmGlobOriginalOriginal(), " setGlobalRMOriginalOriginal new ");
 
   //----------- Reset RMGlobOriginalOriginal() of every component
   std::vector<OpticalObject*> vopto;
   ALIbool igetood = Model::getComponentOptOs(name(), vopto);
   if (!igetood) {
     //    std::cout << " NO MORE COMPONENTS IN THIS OptO" << name() << std::endl ;
     return;
   }
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     //    CLHEP::HepRotation rmoriorid = buildRmFromEntryValues();
     (*vocite)->propagateGlobalRMOriginalOriginalChangeToChildren(rmorioriold, rmoriorinew);
   }
 }

◆ readCoordinates()

void OpticalObject::readCoordinates	(	const ALIstring &	coor_type_read,
		const ALIstring &	coor_type_expected,
		ALIFileIn &	filein
	)

private

Definition at line 212 of file OpticalObject.cc.

References anglesIsGlobal, centreIsGlobal, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, ALIFileIn::ErrorInLine(), beamvalidation::exit(), fillCoordinateEntry(), EntryMgr::getInstance(), ALIFileIn::getWordsInLine(), cuy::ii, longName(), transformCylindrical2Cartesian(), and transformSpherical2Cartesian().

Referenced by readData().

                                                        {
   ALIstring coor_type_reads = coor_type_read.substr(0, 6);
   if (coor_type_reads == "center")
     coor_type_reads = "centre";
   //---------- if after the first six letters ther is a 'G', it means they are global coordinates
   //----- If data is read from a 'report.out', it is always local and this is not needed
 
   //TODO: check that if only one entry of the three is read from 'report.out', the input file does not give global coordinates (it would cause havoc)
   if (EntryMgr::getInstance()->findEntryByLongName(longName(), "") == nullptr) {
     if (coor_type_read.size() == 7) {
       if (coor_type_read[6] == 'G') {
         if (ALIUtils::debug >= 5)
           std::cout << " coordinate global " << coor_type_read << std::endl;
         if (coor_type_expected == "centre") {
           centreIsGlobal = true;
         } else if (coor_type_expected == "angles") {
           anglesIsGlobal = true;
         }
       }
     }
   }
 
   std::vector<ALIstring> wordlist;
   //---------- Read 4 lines: first is entry type, rest are three coordinates (each one will be an individual entry)
   ALIstring coor_names[3];  // to check if using cartesian, cylindrical or spherical coordinates
 
   for (int ii = 0; ii < 4; ii++) {
     if (ii == 0) {
       //---------- Check that first line is of expected type
       if (coor_type_reads != coor_type_expected) {
         filein.ErrorInLine();
         std::cerr << "readCoordinates: " << coor_type_expected << " should be read here, instead of " << coor_type_reads
                   << std::endl;
         exit(1);
       }
     } else {
       //----------- Fill entry Data
       filein.getWordsInLine(wordlist);
       coor_names[ii - 1] = wordlist[0];
       fillCoordinateEntry(coor_type_expected, wordlist);
     }
   }
 
   //---- Transform coordinate system if cylindrical or spherical
   if (coor_names[0] == ALIstring("X") && coor_names[1] == ALIstring("Y") && coor_names[2] == ALIstring("Z")) {
     //do nothing
   } else if (coor_names[0] == ALIstring("R") && coor_names[1] == ALIstring("PHI") && coor_names[2] == ALIstring("Z")) {
     transformCylindrical2Cartesian();
   } else if (coor_names[0] == ALIstring("R") && coor_names[1] == ALIstring("THE") &&
              coor_names[2] == ALIstring("PHI")) {
     transformSpherical2Cartesian();
   } else {
     std::cerr << "!!!EXITING: coordinates have to be cartesian (X ,Y ,Z), or cylindrical (R, PHI, Z) or spherical (R, "
                  "THE, PHI) "
               << std::endl
               << " they are " << coor_names[0] << ", " << coor_names[1] << ", " << coor_names[2] << "." << std::endl;
     exit(1);
   }
 }

◆ readData()

void OpticalObject::readData ( ALIFileIn & filein )

private

Definition at line 118 of file OpticalObject.cc.

References anglesIsGlobal, centreIsGlobal, ALIFileIn::getWordsInLine(), readCoordinates(), readExtraEntries(), setAnglesNull(), and type().

Referenced by construct().

                                               {
   //---------- See if there are extra entries and read them
   std::vector<ALIstring> wordlist;
   filein.getWordsInLine(wordlist);
   if (wordlist[0] == ALIstring("ENTRY")) {
     //---------- Read extra entries from file
     readExtraEntries(filein);
     filein.getWordsInLine(wordlist);
   }
 
   //--------- set centre and angles not global (default behaviour)
   centreIsGlobal = false;
   anglesIsGlobal = false;
 
   //--------- readCoordinates
   if (type() == ALIstring("source") || type() == ALIstring("pinhole")) {
     readCoordinates(wordlist[0], "centre", filein);
     setAnglesNull();
   } else {
     //---------- Read centre and angles
     readCoordinates(wordlist[0], "centre", filein);
     filein.getWordsInLine(wordlist);
     readCoordinates(wordlist[0], "angles", filein);
   }
 }

◆ readExtraEntries()

void OpticalObject::readExtraEntries ( ALIFileIn & filein )

private

Definition at line 147 of file OpticalObject.cc.

References fillExtraEntry(), and ALIFileIn::getWordsInLine().

Referenced by readData().

                                                       {
   //---------- Loop extra entries until a '}'-line is found
   std::vector<ALIstring> wordlist;
   for (;;) {
     filein.getWordsInLine(wordlist);
     if (wordlist[0] != ALIstring("}")) {
       fillExtraEntry(wordlist);
     } else {
       break;
     }
   }
 }

◆ resetGlobalCoordinates()

void OpticalObject::resetGlobalCoordinates ( )

Definition at line 1573 of file OpticalObject.cc.

References calculateLocalRotationAxisInGlobal(), centreGlobOriginal(), ExtraEntryValueList(), ExtraEntryValueOriginalList(), Model::getComponentOptOs(), name(), rmGlobOriginal(), theCentreGlob, and theRmGlob.

Referenced by Entry::addFittedDisplacementToValue().

                                            {
   //---------- Reset centre and rm
   theRmGlob = rmGlobOriginal();
   theCentreGlob = centreGlobOriginal();
 
   //---------- Reset extra entries
   //---------- Set extra entry values list
   std::vector<ALIdouble>::iterator vdite;
   std::vector<ALIdouble>::const_iterator vdcite_o = ExtraEntryValueOriginalList().begin();
   for (vdite = ExtraEntryValueList().begin(); vdite != ExtraEntryValueList().end(); ++vdite, ++vdcite_o) {
     (*vdite) = (*vdcite_o);
   }
 
   //----------- Reset entries of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->resetGlobalCoordinates();
   }
 
   calculateLocalRotationAxisInGlobal();
 }

◆ resetOriginalOriginalCoordinates()

void OpticalObject::resetOriginalOriginalCoordinates ( )

Definition at line 1600 of file OpticalObject.cc.

References calculateLocalRotationAxisInGlobal(), ExtraEntryList(), ExtraEntryValueList(), Model::getComponentOptOs(), name(), theCentreGlob, theCentreGlobOriginal, theCentreGlobOriginalOriginal, theExtraEntryValueOriginalOriginalVector, theExtraEntryValueOriginalVector, theRmGlob, theRmGlobOriginal, and theRmGlobOriginalOriginal.

                                                      {
   //  std::cout << " !!! CALLING resetOriginalOriginalCoordinates(). STOP " << std::endl;
 
   //---------- Reset centre and rm
   theRmGlob = theRmGlobOriginalOriginal;
   theCentreGlob = theCentreGlobOriginalOriginal;
   theRmGlobOriginal = theRmGlobOriginalOriginal;
   theCentreGlobOriginal = theCentreGlobOriginalOriginal;
 
   //---------- Reset extra entry values list
   std::vector<ALIdouble>::iterator vdite;
   std::vector<ALIdouble>::iterator vdite_o = theExtraEntryValueOriginalVector.begin();
   std::vector<ALIdouble>::const_iterator vdcite_oo = theExtraEntryValueOriginalOriginalVector.begin();
   std::vector<Entry*>::const_iterator vdciteE = ExtraEntryList().begin();
   for (vdite = ExtraEntryValueList().begin(); vdite != ExtraEntryValueList().end();
        ++vdite, ++vdite_o, ++vdcite_oo, ++vdciteE) {
     (*vdite) = (*vdcite_oo);
     (*vdite_o) = (*vdcite_oo);
     (*vdciteE)->addFittedDisplacementToValue(-(*vdciteE)->valueDisplacementByFitting());
     //      std::cout << " resetting extra entry origorig " << (*vdciteE)->name() << " = " << (*vdite) << " ? " << (*vdcite_oo)  << std::endl;
     //      std::cout << " resetting extra entry origorig " << (*vdciteE)->name() << " = " << (*vdite) << " ? " << (*vdciteE)->value()  << std::endl;
     //  std::cout << " check extra entry " << (*vdciteE)->value() << " =? " << (*vdite) << std::endl;
   }
 
   /*  std::vector< Entry* >::iterator eite;
   for( eite = theCoordinateEntryVector.begin(); eite != theCoordinateEntryVector.end(); eite++ ){
     (*eite)->addFittedDisplacementToValue( - (*eite)->valueDisplacementByFitting() );
   }
   */
 
   calculateLocalRotationAxisInGlobal();
 
   //----------- Reset entries of every component
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->resetOriginalOriginalCoordinates();
   }
 }

◆ rmGlob()

const CLHEP::HepRotation& OpticalObject::rmGlob ( ) const

inline

Definition at line 83 of file OpticalObject.h.

References theRmGlob.

Referenced by centreLocal(), CocoaDBMgr::GetAlignInfoFromOptO(), getDispVec(), OptOCubeSplitter::getMiddlePlate(), CocoaDBMgr::GetOptAlignInfoFromOptO(), getPlate(), getRotationAnglesInOptOFrame(), OptOCubeSplitter::getUpperPlate(), getZAxis(), LightRay::intersect(), OptODistancemeter::makeMeasurement(), OptOCOPS::makeMeasurement(), Fit::printCentreInOptOFrame(), SetCentreGlobFromCentreLocal(), setOriginalEntryValues(), SetRMGlobFromRMLocal(), LightRay::shiftAndDeviateWhileTraversing(), LightRay::startLightRay(), OptOUserDefined::userDefinedBehaviour(), and EntryAngleAffAngles::valueDisplaced().

83 { return theRmGlob; }

OpticalObject::theRmGlob

CLHEP::HepRotation theRmGlob

Definition: OpticalObject.h:285

◆ rmGlobOriginal()

const CLHEP::HepRotation& OpticalObject::rmGlobOriginal ( ) const

inline

Definition at line 87 of file OpticalObject.h.

References theRmGlobOriginal.

Referenced by displaceRmGlobAroundGlobal(), resetGlobalCoordinates(), and EntryAngleAffAngles::valueDisplaced().

87 { return theRmGlobOriginal; }

OpticalObject::theRmGlobOriginal

CLHEP::HepRotation theRmGlobOriginal

Definition: OpticalObject.h:288

◆ rmGlobOriginalOriginal()

const CLHEP::HepRotation& OpticalObject::rmGlobOriginalOriginal ( ) const

inline

Definition at line 88 of file OpticalObject.h.

References theRmGlobOriginalOriginal.

Referenced by propagateGlobalRMOriginalOriginalChangeToChildren(), setGlobalRMOriginalOriginal(), and SetRMGlobFromRMLocalOriginalOriginal().

88 { return theRmGlobOriginalOriginal; }

OpticalObject::theRmGlobOriginalOriginal

CLHEP::HepRotation theRmGlobOriginalOriginal

Definition: OpticalObject.h:290

◆ rmLocal()

const CLHEP::HepRotation OpticalObject::rmLocal ( ) const

Definition at line 1669 of file OpticalObject.cc.

References eostools::rm(), theCoordinateEntryVector, and relativeConstraints::value.

Referenced by CocoaToDDLMgr::buildRotationNumber(), getRotationAnglesFromMatrix(), and getRotationAnglesInOptOFrame().

                                                     {
   CLHEP::HepRotation rm;
   rm.rotateX(theCoordinateEntryVector[3]->value());
   rm.rotateY(theCoordinateEntryVector[4]->value());
   rm.rotateZ(theCoordinateEntryVector[5]->value());
 
   return rm;
 }

◆ rotateItAroundGlobal()

template<class T >

void OpticalObject::rotateItAroundGlobal	(	T &	object,
		const XYZcoor	coor,
		const double	disp
	)

private

Definition at line 1739 of file OpticalObject.cc.

References gather_cfg::cout, and ALIUtils::debug.

Referenced by displaceRmGlobAroundGlobal().

                                                                                          {
   switch (coor) {
     case 0:
       object.rotateX(disp);
       break;
     case 1:
       object.rotateY(disp);
       break;
     case 2:
       object.rotateZ(disp);
       break;
   }
   //  CLHEP::Hep3Vector axisToRotate = GetAxisForDisplacement( coor );
   //  object.rotate(disp, axisToRotate);
   if (ALIUtils::debug >= 5)
     std::cout << " rotateItAroundGlobal coor " << coor << " disp " << disp << std::endl;
 }

◆ SetAnglesIsGlobal()

void OpticalObject::SetAnglesIsGlobal ( ALIbool isG )

inlineprivate

Definition at line 273 of file OpticalObject.h.

References anglesIsGlobal.

273 { anglesIsGlobal = isG; }

OpticalObject::anglesIsGlobal

ALIbool anglesIsGlobal

Definition: OpticalObject.h:303

◆ setAnglesNull()

void OpticalObject::setAnglesNull ( )

private

Definition at line 343 of file OpticalObject.cc.

References addCoordinateEntryToList(), Model::addEntryToList(), mps_splice::entry, cuy::ii, and name().

Referenced by readData().

                                   {
   EntryAngleAffAngles* entry;
   //---------- three names will be X, Y and Z
   ALIstring coor("XYZ");
 
   //---------- Fill the three entries
   for (int ii = 0; ii < 3; ii++) {
     entry = new EntryAngleAffAngles("angles");
 
     //---------- Set link from entry to OptO it belongs to
     entry->setOptOCurrent(this);
     //----- Name is filled from here to be consistent with fillCoordinate
     ALIstring name = "angles_" + coor.substr(ii, 1);
     entry->fillName(name);
     //---------- Set entry data to zero
     entry->fillNull();
 
     // entry.fillNull( tt );
 
     //---------- Add entry to lists
     Model::addEntryToList(entry);
     addCoordinateEntryToList(entry);
   }
 }

◆ SetCentreGlobFromCentreLocal()

void OpticalObject::SetCentreGlobFromCentreLocal ( )

private

Definition at line 749 of file OpticalObject.cc.

References centreGlob(), ALIUtils::debug, ALIUtils::dump3v(), ALIUtils::dumprm(), name(), parent(), rmGlob(), and theCentreGlob.

Referenced by setGlobalCentre().

                                                  {
   //----------- Get global centre: parent centre plus local centre traslated to parent coordinate system
   CLHEP::Hep3Vector cLocal = theCentreGlob;
   theCentreGlob = parent()->rmGlob() * theCentreGlob;
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlob, "SetCentreGlobFromCentreLocal: CENTRE in parent local frame ");
   theCentreGlob += parent()->centreGlob();
 
   if (ALIUtils::debug >= 5)
     ALIUtils::dump3v(theCentreGlob, "SetCentreGlobFromCentreLocal: CENTRE GLOBAL ");
   if (ALIUtils::debug >= 5) {
     ALIUtils::dump3v(parent()->centreGlob(), " parent centreGlob" + parent()->name());
     ALIUtils::dumprm(parent()->rmGlob(), " parent rmGlob ");
   }
 
   /*  CLHEP::Hep3Vector cLocal2 = theCentreGlob - parent()->centreGlob();
   CLHEP::HepRotation rmParentInv = inverseOf( parent()->rmGlob() );
   cLocal2 = rmParentInv * cLocal2;
   if( (cLocal2 - cLocal).mag() > 1.E-9 ) {
     std::cerr << "!!!! CALCULATE LOCAL WRONG. Diff= " << (cLocal2 - cLocal).mag() << " " << cLocal2 << " " << cLocal << std::endl;
     if( (cLocal2 - cLocal).mag() > 1.E-4 ) {
       std::exception();
     }
     }*/
 }

◆ SetCentreIsGlobal()

void OpticalObject::SetCentreIsGlobal ( ALIbool isG )

inlineprivate

Definition at line 272 of file OpticalObject.h.

References centreIsGlobal.

272 { centreIsGlobal = isG; }

OpticalObject::centreIsGlobal

ALIbool centreIsGlobal

Definition: OpticalObject.h:302

◆ SetCentreLocalFromEntryValues()

void OpticalObject::SetCentreLocalFromEntryValues ( )

private

Definition at line 700 of file OpticalObject.cc.

References centreGlob(), ALIUtils::debug, ALIUtils::dump3v(), getEntryCentre(), theCentreGlob, XCoor, YCoor, and ZCoor.

Referenced by setGlobalCentre().

                                                   {
   //  std::vector<Entry*>::const_iterator vecite = CoordinateEntryList().begin();
   //-  std::cout << "PARENTSYSTEM" << name() << parent() <<"ZZ"<<vecite<< std::endl;
   //  std::cout << " OpticalObject::setGlobalCoordinates " << this->name() << std::endl;
   //-      std::cout << veite << "WW" << *vecite << std::endl;
   //---------------------------------------- Set global centre
   //----------------------------------- Get local centre from Entries
   theCentreGlob.setX(getEntryCentre(XCoor));
   theCentreGlob.setY(getEntryCentre(YCoor));
   theCentreGlob.setZ(getEntryCentre(ZCoor));
   if (ALIUtils::debug >= 4)
     ALIUtils::dump3v(centreGlob(), "SetCentreLocalFromEntryValues: CENTRE LOCAL ");
 }

◆ setCmsswID()

void OpticalObject::setCmsswID ( ALIuint id )

inline

Definition at line 98 of file OpticalObject.h.

References triggerObjects_cff::id, and theCmsswID.

Referenced by constructFromOptAligInfo().

98 { theCmsswID = id; }

OpticalObject::theCmsswID

ALIuint theCmsswID

Definition: OpticalObject.h:311

triggerObjects_cff.id

id

Definition: triggerObjects_cff.py:29

◆ setExtraEntryValue()

void OpticalObject::setExtraEntryValue	(	const ALIuint	entryNo,
		const ALIdouble	disp
	)

Definition at line 1077 of file OpticalObject.cc.

References theExtraEntryValueVector, and heppy_batch::val.

                                                                                  {
   theExtraEntryValueVector[entryNo] = val;
 }

◆ setGlobalCentre()

void OpticalObject::setGlobalCentre ( )

private

Definition at line 593 of file OpticalObject.cc.

References anglesIsGlobal, centreIsGlobal, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, SetCentreGlobFromCentreLocal(), SetCentreLocalFromEntryValues(), and type().

Referenced by displaceRmGlobAroundLocal(), and setGlobalCoordinates().

                                     {
   SetCentreLocalFromEntryValues();
   if (type() != ALIstring("system") && !centreIsGlobal) {
     SetCentreGlobFromCentreLocal();
   }
   if (anglesIsGlobal) {
     std::cerr << "!!!FATAL ERROR: angles in global coordinates not supported momentarily " << std::endl;
     abort();
   }
 }

◆ setGlobalCoordinates()

void OpticalObject::setGlobalCoordinates ( )

Definition at line 587 of file OpticalObject.cc.

References setGlobalCentre(), and setGlobalRM().

Referenced by construct(), constructFromOptAligInfo(), displaceRmGlobOriginal(), displaceRmGlobOriginalOriginal(), and FittedEntriesSet::SetOptOEntries().

                                          {
   setGlobalCentre();
   setGlobalRM();
 }

◆ setGlobalCoordinatesOfComponents()

void OpticalObject::setGlobalCoordinatesOfComponents ( )

private

Definition at line 1304 of file OpticalObject.cc.

References Model::getComponentOptOs(), and name().

                                                      {
   // Calculate the displaced centreGlob and rmGlob of components
   std::vector<OpticalObject*> vopto;
   Model::getComponentOptOs(name(), vopto);
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     (*vocite)->setGlobalCoordinates();
   }
 }

◆ setGlobalRM()

void OpticalObject::setGlobalRM ( )

private

Definition at line 605 of file OpticalObject.cc.

References anglesIsGlobal, calculateLocalRotationAxisInGlobal(), SetRMGlobFromRMLocal(), and SetRMLocalFromEntryValues().

Referenced by setGlobalCoordinates().

                                 {
   SetRMLocalFromEntryValues();
   if (!anglesIsGlobal) {
     SetRMGlobFromRMLocal();
   }
 
   // Calculate local rot axis with new rm glob
   calculateLocalRotationAxisInGlobal();
 }

◆ setGlobalRMOriginalOriginal()

void OpticalObject::setGlobalRMOriginalOriginal ( const CLHEP::HepRotation & rmoriori )

Definition at line 616 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dumprm(), Model::getComponentOptOs(), name(), parent(), rmGlobOriginalOriginal(), and SetRMGlobFromRMLocalOriginalOriginal().

Referenced by FittedEntriesReader::readFittedEntriesFromFile().

                                                                                      {
   CLHEP::HepRotation rmorioriold = rmGlobOriginalOriginal();
   if (ALIUtils::debug >= 5) {
     std::cout << " setGlobalRMOriginalOriginal OptO " << name() << std::endl;
     ALIUtils::dumprm(rmorioriLocal, " setGlobalRMOriginalOriginal new local");
     ALIUtils::dumprm(rmGlobOriginalOriginal(), " setGlobalRMOriginalOriginal old ");
   }
 
   SetRMGlobFromRMLocalOriginalOriginal(rmorioriLocal);
 
   /*  //---- multiplyt it by parent rmGlobOriginalOriginal
   if( parent()->type() != ALIstring("system") ) {
     theRmGlobOriginalOriginal = parent()->rmGlobOriginalOriginal() * theRmGlobOriginalOriginal;
     }*/
 
   if (ALIUtils::debug >= 5) {
     ALIUtils::dumprm(parent()->rmGlobOriginalOriginal(), " parent rmoriori glob  ");
     ALIUtils::dumprm(rmGlobOriginalOriginal(), " setGlobalRMOriginalOriginal new ");
   }
 
   //----------- Reset RMGlobOriginalOriginal() of every component
   std::vector<OpticalObject*> vopto;
   ALIbool igetood = Model::getComponentOptOs(name(), vopto);
   if (!igetood) {
     //    std::cout << " NO MORE COMPONENTS IN THIS OptO" << name() << std::endl ;
     return;
   }
   std::vector<OpticalObject*>::const_iterator vocite;
   for (vocite = vopto.begin(); vocite != vopto.end(); ++vocite) {
     CLHEP::HepRotation rmorioriLocalChild = (*vocite)->buildRmFromEntryValuesOriginalOriginal();
     (*vocite)->setGlobalRMOriginalOriginal(rmorioriLocalChild);
     //    (*vocite)->propagateGlobalRMOriginalOriginalChangeToChildren( rmorioriold, rmGlobOriginalOriginal() );
   }
 }

◆ setID()

void OpticalObject::setID ( ALIuint id )

inline

Definition at line 99 of file OpticalObject.h.

References triggerObjects_cff::id, and theCmsswID.

Referenced by createComponentOptOs().

99 { theCmsswID = id; }

OpticalObject::theCmsswID

ALIuint theCmsswID

Definition: OpticalObject.h:311

triggerObjects_cff.id

id

Definition: triggerObjects_cff.py:29

◆ setMeas()

void OpticalObject::setMeas ( Measurement * meas )

inline

set current measurement

Definition at line 199 of file OpticalObject.h.

References meas(), and theCurrentMeas.

Referenced by participateInMeasurement().

199 { theCurrentMeas = meas; }

OpticalObject::theCurrentMeas

Measurement * theCurrentMeas

Definition: OpticalObject.h:305

OpticalObject::meas

Measurement * meas()

Definition: OpticalObject.h:200

◆ setOriginalEntryValues()

void OpticalObject::setOriginalEntryValues ( )

Definition at line 823 of file OpticalObject.cc.

References addExtraEntryValueOriginalOriginalToList(), addExtraEntryValueOriginalToList(), centreGlob(), gather_cfg::cout, ALIUtils::debug, ExtraEntryValueList(), rmGlob(), theCentreGlobOriginal, theCentreGlobOriginalOriginal, theRmGlobOriginal, and theRmGlobOriginalOriginal.

Referenced by construct(), constructFromOptAligInfo(), and FittedEntriesSet::SetOptOEntries().

                                            {
   //---------- Set orig coordinates
   theCentreGlobOriginal = centreGlob();
   theRmGlobOriginal = rmGlob();
 
   theCentreGlobOriginalOriginal = centreGlob();
   theRmGlobOriginalOriginal = rmGlob();
 
   /*  if ( ALIUtils::debug >= 5 ) {
     ALIUtils::dump3v( centreGlob(), "OPTO: CENTRE GLOB ");
     ALIUtils::dumprm( rmGlob(), "OPTO: RM GLOB ");
     }*/
 
   //---------- Set extra entry values
   std::vector<ALIdouble>::const_iterator vdcite;
   for (vdcite = ExtraEntryValueList().begin(); vdcite != ExtraEntryValueList().end(); ++vdcite) {
     addExtraEntryValueOriginalToList(*vdcite);
     addExtraEntryValueOriginalOriginalToList(*vdcite);
   }
   //-  test();
   if (ALIUtils::debug >= 6)
     std::cout << " setOriginalEntryValues " << std::endl;
 }

◆ setRmGlobal()

void OpticalObject::setRmGlobal ( const CLHEP::HepRotation & rm )

inline

Definition at line 108 of file OpticalObject.h.

References eostools::rm(), and theRmGlob.

Referenced by OptOLens::OptOLens(), and OptOSource::OptOSource().

108 { theRmGlob = rm; }

eostools.rm

def rm(path, rec=False)

Definition: eostools.py:363

OpticalObject::theRmGlob

CLHEP::HepRotation theRmGlob

Definition: OpticalObject.h:285

◆ setRmGlobalOriginal()

void OpticalObject::setRmGlobalOriginal ( const CLHEP::HepRotation & rm )

inline

Definition at line 102 of file OpticalObject.h.

References eostools::rm(), and theRmGlobOriginal.

Referenced by OptOLens::OptOLens(), and OptOSource::OptOSource().

102 { theRmGlobOriginal = rm; }

eostools.rm

def rm(path, rec=False)

Definition: eostools.py:363

OpticalObject::theRmGlobOriginal

CLHEP::HepRotation theRmGlobOriginal

Definition: OpticalObject.h:288

◆ SetRMGlobFromRMLocal()

void OpticalObject::SetRMGlobFromRMLocal ( )

private

Definition at line 777 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dumprm(), getEntryRMangle(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), longName(), name(), parent(), rmGlob(), theRmGlob, type(), XCoor, YCoor, and ZCoor.

Referenced by displaceRmGlobAroundLocal(), and setGlobalRM().

                                          {
   const OpticalObject* opto_par = this;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   if (gomgr->GlobalOptions()["rotateAroundLocal"] == 0) {
     while (opto_par->parent()->type() != ALIstring("system")) {
       //t    vecite = opto_par->parent()->GetCoordinateEntry( CEanglesX );
       if (ALIUtils::debug >= 5)
         std::cout << "rotate with parent: before X " << opto_par->parent()->name() << " "
                   << parent()->getEntryRMangle(XCoor) << std::endl;
       theRmGlob.rotateX(parent()->getEntryRMangle(XCoor));
       if (ALIUtils::debug >= 5)
         std::cout << "rotate with parent: before Y " << opto_par->parent()->name() << " "
                   << parent()->getEntryRMangle(YCoor) << std::endl;
       theRmGlob.rotateY(parent()->getEntryRMangle(YCoor));
       if (ALIUtils::debug >= 5)
         std::cout << "rotate with parent: before Z " << opto_par->parent()->name() << " "
                   << parent()->getEntryRMangle(ZCoor) << std::endl;
       theRmGlob.rotateZ(parent()->getEntryRMangle(ZCoor));
       if (ALIUtils::debug >= 4)
         ALIUtils::dumprm(theRmGlob, "SetRMGlobFromRMLocal: RM GLOB after " + opto_par->parent()->longName());
       opto_par = opto_par->parent();
     }
   } else {
     if (ALIUtils::debug >= 4) {
       std::cout << " Composing rmGlob with parent " << parent()->name() << std::endl;
       //      ALIUtils::dumprm( theRmGlob, "SetRMGlobFromRMLocal: RM GLOB ");
     }
     theRmGlob = parent()->rmGlob() * theRmGlob;
   }
 
   //    std::cout << "rotate with parent (parent)" << opto_par->name() <<parent()->name() << (*vecite)->name() << (*vecite)->value() <<std::endl;
   if (ALIUtils::debug >= 4) {
     ALIUtils::dumprm(theRmGlob, "SetRMGlobFromRMLocal: final RM GLOB ");
     ALIUtils::dumprm(parent()->rmGlob(), "parent rm glob ");
   }
 }

◆ SetRMGlobFromRMLocalOriginalOriginal()

void OpticalObject::SetRMGlobFromRMLocalOriginalOriginal ( const CLHEP::HepRotation & rmoriori )

private

Definition at line 815 of file OpticalObject.cc.

References parent(), rmGlobOriginalOriginal(), and theRmGlobOriginalOriginal.

Referenced by setGlobalRMOriginalOriginal().

                                                                                          {
   theRmGlobOriginalOriginal = rmoriori;
   theRmGlobOriginalOriginal = parent()->rmGlobOriginalOriginal() * theRmGlobOriginalOriginal;
 }

◆ SetRMLocalFromEntryValues()

void OpticalObject::SetRMLocalFromEntryValues ( )

private

Definition at line 715 of file OpticalObject.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dumprm(), getEntryRMangle(), theRmGlob, XCoor, YCoor, and ZCoor.

Referenced by setGlobalRM().

                                               {
   //---------- Set global rotation matrix
   //-------- Get rm from Entries
   theRmGlob = CLHEP::HepRotation();
   theRmGlob.rotateX(getEntryRMangle(XCoor));
   if (ALIUtils::debug >= 4) {
     std::cout << "  getEntryRMangle(XCoor) )" << getEntryRMangle(XCoor) << std::endl;
     ALIUtils::dumprm(theRmGlob, "SetRMLocalFromEntryValues: RM after X");
   }
   theRmGlob.rotateY(getEntryRMangle(YCoor));
   if (ALIUtils::debug >= 4) {
     std::cout << "  getEntryRMangle(YCoor) )" << getEntryRMangle(YCoor) << std::endl;
     ALIUtils::dumprm(theRmGlob, "SetRMLocalFromEntryValues: RM after Y");
   }
   theRmGlob.rotateZ(getEntryRMangle(ZCoor));
   if (ALIUtils::debug >= 4) {
     std::cout << "  getEntryRMangle(ZCoor) )" << getEntryRMangle(ZCoor) << std::endl;
     ALIUtils::dumprm(theRmGlob, "SetRMLocalFromEntryValues: RM FINAL");
   }
 
   //----- angles are relative to parent, so rotate parent angles first
   //  RmGlob() = 0;
   //-  if(ALIUtils::debug >= 4) ALIUtils::dumprm( parent()->rmGlob(), "OPTO0: RM LOCAL ");
   //  if ( type() != ALIstring("system") ) theRmGlob.transform( parent()->rmGlob() );
   //----- if anglesIsGlobal, RM is already in global coordinates, else multiply by ancestors
 
   /*  /////////////
   CLHEP::Hep3Vector ztest(0.,0.,1.);
   ztest = theRmGlob * ztest;
   if( ALIUtils::debug >= 5 ) ALIUtils::dump3v( ztest, "z rotated by theRmGlob ");
   */
 }

◆ setType()

void OpticalObject::setType ( const ALIstring & type )

inline

Definition at line 110 of file OpticalObject.h.

References theType, and type().

110 { theType = type; }

OpticalObject::theType

ALIstring theType

Definition: OpticalObject.h:278

OpticalObject::type

const ALIstring & type() const

Definition: OpticalObject.h:59

◆ shortName()

const ALIstring OpticalObject::shortName ( ) const

Definition at line 1649 of file OpticalObject.cc.

References name(), and findQualityFiles::size.

Referenced by CocoaToDDLMgr::lv(), and CocoaToDDLMgr::pv().

                                                {
   ALIint last_slash = name().rfind('/');
   ALIstring sname = name().substr(last_slash + 1, name().size() - 1);
   if (last_slash == -1) {  //object of type "system"
     sname = name();
   } else {
     sname = name().substr(last_slash + 1, name().size() - 1);
   }
   return sname;
 }

◆ transformCylindrical2Cartesian()

void OpticalObject::transformCylindrical2Cartesian ( )

private

Definition at line 275 of file OpticalObject.cc.

References ALIUtils::AngleValueDimensionFactor(), funct::cos(), gather_cfg::cout, ALIUtils::debug, Exception, cuy::ii, ALIUtils::LengthValueDimensionFactor(), name(), phi, dttmaxenums::R, funct::sin(), and theCoordinateEntryVector.

Referenced by readCoordinates().

                                                    {
   ALIuint ii;
   ALIuint siz = theCoordinateEntryVector.size();
   ALIdouble R = theCoordinateEntryVector[0]->value();
   ALIdouble phi = theCoordinateEntryVector[1]->value() / ALIUtils::LengthValueDimensionFactor() *
                   ALIUtils::AngleValueDimensionFactor();
   if (siz != 3) {
     throw cms::Exception("LogicError") << "@SUB=OpticalObject::transformCylindrical2Cartesian\n"
                                        << "Transformation from cylindrical to cartesian coordinates requires the"
                                        << " coordinate entry vector to have a size of three.";
   }
   ALIdouble newcoor[3] = {
       R * cos(phi),
       R * sin(phi),
       theCoordinateEntryVector[2]->value()  // Z
   };
   //-  std::cout << " phi " << phi << std::endl;
   //----- Name is filled from here to include 'centre' or 'angles'
 
   for (ii = 0; ii < siz; ii++) {
     if (ALIUtils::debug >= 5)
       std::cout << " OpticalObject::transformCylindrical2Cartesian " << ii << " " << newcoor[ii] << std::endl;
     theCoordinateEntryVector[ii]->setValue(newcoor[ii]);
   }
   // change the names
   ALIstring name = "centre_X";
   theCoordinateEntryVector[0]->fillName(name);
   name = "centre_Y";
   theCoordinateEntryVector[1]->fillName(name);
   name = "centre_Z";
   theCoordinateEntryVector[2]->fillName(name);
 }

◆ transformGlobal2Local()

void OpticalObject::transformGlobal2Local ( )

private

◆ transformSpherical2Cartesian()

void OpticalObject::transformSpherical2Cartesian ( )

private

Definition at line 309 of file OpticalObject.cc.

Referenced by readCoordinates().

309 {}

◆ type()

const ALIstring& OpticalObject::type ( ) const

inline

Definition at line 59 of file OpticalObject.h.

References theType.

Referenced by createComponentOptOs(), defaultBehaviour(), detailedDeviatesLightRay(), detailedTraversesLightRay(), fastDeviatesLightRay(), fastTraversesLightRay(), CocoaDBMgr::GetOptAlignInfoFromOptO(), CocoaToDDLMgr::lv(), makeMeasurement(), Fit::printCentreInOptOFrame(), readData(), setGlobalCentre(), SetRMGlobFromRMLocal(), setType(), CocoaToDDLMgr::specPar(), LightRay::startLightRay(), and userDefinedBehaviour().

59 { return theType; };

OpticalObject::theType

ALIstring theType

Definition: OpticalObject.h:278

◆ userDefinedBehaviour()

void OpticalObject::userDefinedBehaviour	(	LightRay &	lightray,
		Measurement &	meas,
		const ALIstring &	behav
	)

virtual

Reimplemented in OptOUserDefined.

Definition at line 930 of file OpticalObject.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), name(), and type().

Referenced by participateInMeasurement().

                                                                                                       {
   std::cerr << "!!! Optical Object " << name() << " of type " << type()
             << " does not implement user defined behaviour = " << behav << std::endl;
   std::cerr << " Please read documentation for this object type" << std::endl;
   exit(1);
 }

Friends And Related Function Documentation

◆ operator<<

std::ostream& operator<<	(	std::ostream &	os,
		const OpticalObject &	c
	)

friend

Definition at line 1661 of file OpticalObject.cc.

                                                                {
   os << "OPTICALOBJECT: " << c.theName << " of type: " << c.theType << "  " << c.theCentreGlob << c.theRmGlob
      << std::endl;
 
   return os;
 }

Member Data Documentation

◆ anglesIsGlobal

ALIbool OpticalObject::anglesIsGlobal

private

Definition at line 303 of file OpticalObject.h.

Referenced by constructFromOptAligInfo(), copyData(), displaceRmGlobAroundLocal(), readCoordinates(), readData(), SetAnglesIsGlobal(), setGlobalCentre(), and setGlobalRM().

◆ axisXLocalInGlobal

CLHEP::Hep3Vector OpticalObject::axisXLocalInGlobal

private

Definition at line 307 of file OpticalObject.h.

Referenced by calculateLocalRotationAxisInGlobal().

◆ axisYLocalInGlobal

CLHEP::Hep3Vector OpticalObject::axisYLocalInGlobal

private

Definition at line 308 of file OpticalObject.h.

Referenced by calculateLocalRotationAxisInGlobal().

◆ axisZLocalInGlobal

CLHEP::Hep3Vector OpticalObject::axisZLocalInGlobal

private

Definition at line 309 of file OpticalObject.h.

Referenced by calculateLocalRotationAxisInGlobal().

◆ centreIsGlobal

ALIbool OpticalObject::centreIsGlobal

private

Definition at line 302 of file OpticalObject.h.

Referenced by constructFromOptAligInfo(), copyData(), readCoordinates(), readData(), SetCentreIsGlobal(), and setGlobalCentre().

◆ fcopyData

ALIbool OpticalObject::fcopyData

private

Definition at line 281 of file OpticalObject.h.

Referenced by construct(), createComponentOptOs(), and OpticalObject().

◆ theCentreGlob

CLHEP::Hep3Vector OpticalObject::theCentreGlob

private

Definition at line 284 of file OpticalObject.h.

Referenced by centreGlob(), centreLocal(), displaceCentreGlob(), displaceRmGlobAroundGlobal(), displaceRmGlobOriginal(), displaceRmGlobOriginalOriginal(), resetGlobalCoordinates(), resetOriginalOriginalCoordinates(), SetCentreGlobFromCentreLocal(), and SetCentreLocalFromEntryValues().

◆ theCentreGlobOriginal

CLHEP::Hep3Vector OpticalObject::theCentreGlobOriginal

private

Definition at line 287 of file OpticalObject.h.

Referenced by centreGlobOriginal(), displaceCentreGlobOriginal(), displaceRmGlobOriginal(), resetOriginalOriginalCoordinates(), and setOriginalEntryValues().

◆ theCentreGlobOriginalOriginal

CLHEP::Hep3Vector OpticalObject::theCentreGlobOriginalOriginal

private

Definition at line 289 of file OpticalObject.h.

Referenced by centreGlobOriginalOriginal(), displaceCentreGlobOriginalOriginal(), displaceRmGlobOriginalOriginal(), resetOriginalOriginalCoordinates(), and setOriginalEntryValues().

◆ theCmsswID

ALIuint OpticalObject::theCmsswID

private

Definition at line 311 of file OpticalObject.h.

Referenced by getCmsswID(), ID(), setCmsswID(), and setID().

◆ theCoordinateEntryVector

std::vector<Entry*> OpticalObject::theCoordinateEntryVector

private

Definition at line 293 of file OpticalObject.h.

Referenced by addCoordinateEntryToList(), CoordinateEntryList(), getEntryCentre(), getEntryRMangle(), rmLocal(), and transformCylindrical2Cartesian().

◆ theCurrentMeas

Measurement* OpticalObject::theCurrentMeas

private

Definition at line 305 of file OpticalObject.h.

Referenced by meas(), and setMeas().

◆ theExtraEntryValueOriginalOriginalVector

std::vector<ALIdouble> OpticalObject::theExtraEntryValueOriginalOriginalVector

private

Definition at line 299 of file OpticalObject.h.

Referenced by addExtraEntryValueOriginalOriginalToList(), displaceExtraEntryOriginalOriginal(), ExtraEntryValueOriginalOriginalList(), and resetOriginalOriginalCoordinates().

◆ theExtraEntryValueOriginalVector

std::vector<ALIdouble> OpticalObject::theExtraEntryValueOriginalVector

private

Definition at line 298 of file OpticalObject.h.

Referenced by addExtraEntryValueOriginalToList(), displaceExtraEntry(), displaceExtraEntryOriginal(), ExtraEntryValueOriginalList(), and resetOriginalOriginalCoordinates().

◆ theExtraEntryValueVector

std::vector<ALIdouble> OpticalObject::theExtraEntryValueVector

private

Definition at line 297 of file OpticalObject.h.

Referenced by addExtraEntryValueToList(), displaceExtraEntry(), ExtraEntryValueList(), findExtraEntryValue(), and setExtraEntryValue().

◆ theExtraEntryVector

std::vector<Entry*> OpticalObject::theExtraEntryVector

private

Definition at line 294 of file OpticalObject.h.

Referenced by addExtraEntryToList(), and ExtraEntryList().

◆ theMaterial

CocoaMaterialElementary* OpticalObject::theMaterial

protected

Definition at line 314 of file OpticalObject.h.

Referenced by constructMaterial(), and getMaterial().

◆ theName

ALIstring OpticalObject::theName

private

Definition at line 279 of file OpticalObject.h.

Referenced by copyData(), createComponentOptOsFromOptAlignInfo(), name(), and OpticalObject().

◆ theParent

OpticalObject* OpticalObject::theParent

private

Definition at line 277 of file OpticalObject.h.

Referenced by construct(), constructFromOptAligInfo(), getLocalRotationAngles(), and parent().

◆ theRmGlob

CLHEP::HepRotation OpticalObject::theRmGlob

private

Definition at line 285 of file OpticalObject.h.

Referenced by buildRmFromEntryValuesOriginalOriginal(), calculateLocalRotationAxisInGlobal(), displaceRmGlobAroundGlobal(), displaceRmGlobAroundLocal(), displaceRmGlobOriginal(), displaceRmGlobOriginalOriginal(), getRotationAnglesInOptOFrame(), resetGlobalCoordinates(), resetOriginalOriginalCoordinates(), rmGlob(), setRmGlobal(), SetRMGlobFromRMLocal(), and SetRMLocalFromEntryValues().

◆ theRmGlobOriginal

CLHEP::HepRotation OpticalObject::theRmGlobOriginal

private

Definition at line 288 of file OpticalObject.h.

Referenced by displaceRmGlobOriginal(), getRotationAnglesInOptOFrame(), resetOriginalOriginalCoordinates(), rmGlobOriginal(), setOriginalEntryValues(), and setRmGlobalOriginal().

◆ theRmGlobOriginalOriginal

CLHEP::HepRotation OpticalObject::theRmGlobOriginalOriginal

private

Definition at line 290 of file OpticalObject.h.

Referenced by displaceRmGlobOriginalOriginal(), propagateGlobalRMOriginalOriginalChangeToChildren(), resetOriginalOriginalCoordinates(), rmGlobOriginalOriginal(), setOriginalEntryValues(), and SetRMGlobFromRMLocalOriginalOriginal().

◆ theSolidShape

CocoaSolidShape* OpticalObject::theSolidShape

protected

Definition at line 315 of file OpticalObject.h.

Referenced by OptOXLaser::constructSolidShape(), OptOLens::constructSolidShape(), OptOPinhole::constructSolidShape(), OptOSource::constructSolidShape(), OptOLaser::constructSolidShape(), OptODistancemeter3dim::constructSolidShape(), OptODistancemeter::constructSolidShape(), OptOCubeSplitter::constructSolidShape(), constructSolidShape(), and getSolidShape().

◆ theType

ALIstring OpticalObject::theType

private

Definition at line 278 of file OpticalObject.h.

Referenced by OpticalObject(), setType(), and type().

◆ verbose

ALIint OpticalObject::verbose

protected

Definition at line 317 of file OpticalObject.h.

Referenced by python.diff_provenance.difference::list_diff(), python.diffProv.difference::list_diff(), python.diff_provenance.difference::module_diff(), python.diffProv.difference::module_diff(), python.diff_provenance.difference::onefilemodules(), python.diffProv.difference::onefilemodules(), core.TriggerMatchAnalyzer.TriggerMatchAnalyzer::process(), core.SkimAnalyzerCount.SkimAnalyzerCount::process(), objects.VertexAnalyzer.VertexAnalyzer::process(), and confdbOfflineConverter.OfflineConverter::query().

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

◆ OpticalObject() [1/2]

◆ OpticalObject() [2/2]

◆ ~OpticalObject()

Member Function Documentation

◆ addCoordinateEntryToList()

◆ addExtraEntryToList()

◆ addExtraEntryValueOriginalOriginalToList()

◆ addExtraEntryValueOriginalToList()

◆ addExtraEntryValueToList()

◆ addPii()

◆ approxTo0()

◆ buildRmFromEntryValuesOriginalOriginal()

◆ buildWordList()

◆ calculateLocalRotationAxisInGlobal()

◆ centreGlob()

◆ centreGlobal()

◆ centreGlobOriginal()

◆ centreGlobOriginalOriginal()

◆ centreLocal()

◆ checkMatrixEquations()

◆ construct()

◆ constructFromOptAligInfo()

◆ constructMaterial()

◆ constructSolidShape()

◆ CoordinateEntryList()

◆ copyData()

◆ createComponentOptOs()

◆ createComponentOptOsFromOptAlignInfo()

◆ createNewOptO()

◆ defaultBehaviour()

◆ detailedDeviatesLightRay()

◆ detailedTraversesLightRay()

◆ diff2pi()

◆ displaceCentreGlob() [1/2]

◆ displaceCentreGlob() [2/2]

◆ displaceCentreGlobOriginal() [1/2]

◆ displaceCentreGlobOriginal() [2/2]

◆ displaceCentreGlobOriginalOriginal() [1/2]

◆ displaceCentreGlobOriginalOriginal() [2/2]

◆ displaceExtraEntry()

◆ displaceExtraEntryOriginal()

◆ displaceExtraEntryOriginalOriginal()

◆ displaceRmGlobAroundGlobal()

◆ displaceRmGlobAroundLocal()

◆ displaceRmGlobOriginal()

◆ displaceRmGlobOriginalOriginal()

◆ eq2ang()

◆ ExtraEntryList()

◆ extraEntryNo()

◆ ExtraEntryValueList()

◆ ExtraEntryValueOriginalList()

◆ ExtraEntryValueOriginalOriginalList()

◆ fastDeviatesLightRay()

◆ fastTraversesLightRay()

◆ fillCoordinateEntry()

◆ fillExtraEntry()

◆ fillIguana()

◆ fillVRML()

◆ findExtraEntryValue()

◆ findExtraEntryValueIfExists()

◆ findExtraEntryValueMustExist()

◆ getCmsswID()

◆ getCoordinateFromOptAlignParam()

◆ getDisplacementInLocalCoordinates()

◆ getDispVec()

◆ getEntryCentre() [1/2]

◆ getEntryCentre() [2/2]

◆ getEntryRMangle() [1/2]

◆ getEntryRMangle() [2/2]

◆ getLocalRotationAngles()

◆ getMaterial()

◆ getPlate()