#include <iostream>
#include <fstream>
#include <sstream>
#include <vector>
#include <cmath>
#include <cstring>
#include <ctime>
#include <sys/stat.h>
#include <bitset>
#include <unistd.h>
#include "Dip.h"
#include "DipFactory.h"
#include "DipPublication.h"
#include "DipTimestamp.h"

Classes
class	ErrHandler

Functions
void	beginServer ()

void	CMS2LHCRF_POS (float x, float y, float z)

void	endServer ()

void	fakeRcd ()

string	getDateTime (time_t t)

string	getDateTime ()

long	getFileSize (string filename)

time_t	getLastTime (string filename)

int	main (int narg, char *args[])

vector< string >	parse (string line, const string &delimiter)

void	polling ()

void	problem ()

void	publishRcd (string qlty, string err, bool pubCMS, bool fitTime)

bool	readRcd (ifstream &file)

string	tkStatus ()

void	trueRcd ()

Variables
std::bitset< 8 >	alive

float	Centroid [3]

const int	cm2mm = 10

const int	cm2um = 10000

int	currentLS = 0

DipFactory *	dip

float	dxdz = 0

float	dydz = 0

string	endTime

time_t	endTimeStamp = 0

float	err_dxdz = 0

float	err_dydz = 0

float	err_meanPV = 0

float	err_rmsPV = 0

float	err_sigma_z = 0

float	err_width_x = 0

float	err_width_y = 0

float	err_x = 0

float	err_y = 0

float	err_z = 0

int	events = 0

const int	intLS = 1

long	lastFitTime = 0

long	lastModTime = 0

int	lsCount = 0

string	lumiRange = "0 - 0"

int	maxPV = 0

float	meanPV = 0

DipData *	messageCMS

DipData *	messageLHC

DipData *	messagePV

int	nPV = 0

DipPublication *	publicationCMS

DipPublication *	publicationLHC

DipPublication *	publicationPV

const bool	publishStatErrors = true

const char *	qualities [3] = {"Uncertain", "Bad", "Good"}

string	quality = "Uncertain"

const int	rad2urad = 1000000

float	rmsPV = 0

int	runnum

const int	secPerLS = 23

float	sigma_z = 0

float	Size [3]

string	sourceFile = "/nfshome0/dqmpro/BeamMonitorDQM/BeamFitResultsForDIP.txt"

string	sourceFile1 = "/nfshome0/dqmpro/BeamMonitorDQM/BeamFitResultsOld_TkStatus.txt"

string	startTime

time_t	startTimeStamp = 0

const string	subjectCMS = "dip/CMS/Tracker/BeamSpot"

const string	subjectLHC = "dip/CMS/LHC/LuminousRegion"

const string	subjectPV = "dip/CMS/Tracker/PrimaryVertices"

bool	testing = false

float	Tilt [2]

const int	timeoutLS [2] = {1, 2}

int	type = -1

bool	verbose = false

float	width_x = 0

float	width_y = 0

float	x = 0

float	y = 0

float	z = 0

Function Documentation

◆ beginServer()

void beginServer ( )

Definition at line 617 of file beamSpotDipStandalone.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, dip, MillePedeFileConverter_cfg::e, cppFunctionSkipper::exception, getDateTime(), messageCMS, messageLHC, messagePV, publicationCMS, publicationLHC, publicationPV, publishRcd(), qualities, quality, subjectCMS, subjectLHC, subjectPV, and trueRcd().

Referenced by main().

                    {
   try {
     ErrHandler errHandler;
 
     cerr << "server started at " + getDateTime() << endl;
 
     cerr << "creating publication " + subjectCMS << endl;
     publicationCMS = dip->createDipPublication(subjectCMS.c_str(), &errHandler);
     messageCMS = dip->createDipData();
 
     cerr << "creating publication " + subjectLHC << endl;
     publicationLHC = dip->createDipPublication(subjectLHC.c_str(), &errHandler);
     messageLHC = dip->createDipData();
 
     cerr << "creating publication " + subjectPV << endl;
     publicationPV = dip->createDipPublication(subjectPV.c_str(), &errHandler);
     messagePV = dip->createDipData();
 
     trueRcd();  // starts with all 0
     publishRcd("UNINITIALIZED", "", true, false);
   } catch (exception& e) {
     cerr << "exception (start up): " << e.what() << endl;
   }
 
   quality = qualities[0];  // start with Uncertain
 }

◆ CMS2LHCRF_POS()

void CMS2LHCRF_POS	(	float	x,
		float	y,
		float	z
	)

Definition at line 159 of file beamSpotDipStandalone.cc.

References Centroid, cm2mm, cm2um, x, y, and z.

Referenced by BeamSpotDipServer::trueRcd(), and trueRcd().

                                               {
   if (x != 0) {  // Rotation + Translation + Inversion + Scaling
     double tmpx = x;
     // x*rotY[0]*rotZ[0] + y*rotY[0]*rotZ[1] - z*rotY[1] + trans[0];
     Centroid[0] = tmpx;
     Centroid[0] *= -1.0 * cm2um;
   } else
     Centroid[0] = x;
 
   if (y != 0) {  // Rotation + Translation + Scaling
     double tmpy = y;
     // x*(rotX[1]*rotY[1]*rotZ[0] - rotX[0]*rotZ[1]) +
     // y*(rotX[0]*rotZ[0] + rotX[1]*rotY[1]*rotZ[1]) +
     // z*rotX[1]*rotY[0] + trans[1];
     Centroid[1] = tmpy;
     Centroid[1] *= cm2um;
   } else
     Centroid[1] = y;
 
   if (z != 0) {  // Rotation + Translation + Inversion + Scaling
     double tmpz = z;
     // x*(rotX[0]*rotY[1]*rotZ[0] + rotX[1]*rotZ[1]) +
     // y*(rotX[0]*rotY[1]*rotZ[1] - rotX[1]*rotZ[0]) +
     // z*rotX[0]*rotY[0] + trans[2];
     Centroid[2] = tmpz;
     Centroid[2] *= -1.0 * cm2mm;
   } else
     Centroid[2] = z;
 }

◆ endServer()

void endServer ( )

Definition at line 645 of file beamSpotDipStandalone.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, dip, messageCMS, messageLHC, messagePV, publicationCMS, publicationLHC, publicationPV, subjectCMS, subjectLHC, and subjectPV.

Referenced by main().

                  {
   // destroy publications and data
   cerr << "destroying publication " + subjectCMS << endl;
   dip->destroyDipPublication(publicationCMS);
   delete messageCMS;
 
   cerr << "destroying publication " + subjectLHC << endl;
   dip->destroyDipPublication(publicationLHC);
   delete messageLHC;
 
   cerr << "destroying publication " + subjectPV << endl;
   dip->destroyDipPublication(publicationPV);
   delete messagePV;
 }

◆ fakeRcd()

void fakeRcd ( )

Definition at line 256 of file beamSpotDipStandalone.cc.

References Centroid, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, MillePedeFileConverter_cfg::e, cppFunctionSkipper::exception, messageLHC, Size, and Tilt.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), polling(), BeamSpotDipServer::problem(), and problem().

                {
   try {
     Centroid[0] = 0;
     Centroid[1] = 0;
     Centroid[2] = 0;
 
     Size[0] = 0;
     Size[1] = 0;
     Size[2] = 0;
 
     Tilt[0] = 0;
     Tilt[1] = 0;
 
     messageLHC->insert(Size, 3, "Size");
     messageLHC->insert(Centroid, 3, "Centroid");
     messageLHC->insert(Tilt, 2, "Tilt");
   } catch (exception& e) {
     cerr << "exception (fakeRcd): " << e.what() << endl;
   }
 }

◆ getDateTime() [1/2]

string getDateTime ( time_t t )

Definition at line 102 of file beamSpotDipStandalone.cc.

References submitPVValidationJobs::t.

Referenced by beginServer(), BeamSpotDipServer::dqmBeginRun(), BeamSpotDipServer::dqmEndLuminosityBlock(), BeamSpotDipServer::getDateTime(), getDateTime(), main(), polling(), and readRcd().

                              {
   char mbstr[100];
   strftime(mbstr, sizeof(mbstr), "%Y.%m.%d %H:%M:%S %z", std::localtime(&t));
 
   return mbstr;
 }

◆ getDateTime() [2/2]

string getDateTime ( )

Definition at line 109 of file beamSpotDipStandalone.cc.

References getDateTime(), submitPVValidationJobs::t, and protons_cff::time.

                      {
   time_t t = time(nullptr);
 
   return getDateTime(t);
 }

◆ getFileSize()

long getFileSize ( string filename )

Definition at line 127 of file beamSpotDipStandalone.cc.

References corrVsCorr::filename, and edm_modernize_messagelogger::stat.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), polling(), BeamSpotDipServer::tkStatus(), and tkStatus().

                                   {
   struct stat stat_buf;
   int rc = stat(filename.c_str(), &stat_buf);
   return (rc == 0 ? stat_buf.st_size : -1);
 }

◆ getLastTime()

time_t getLastTime ( string filename )

Definition at line 134 of file beamSpotDipStandalone.cc.

References corrVsCorr::filename, and edm_modernize_messagelogger::stat.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), and polling().

                                     {
   struct stat stat_buf;
   int rc = stat(filename.c_str(), &stat_buf);
   return (rc == 0 ? stat_buf.st_mtime : -1);
 }

◆ main()

int main	(	int	narg,
		char *	args[]
	)

===============================================================================================================================================================================================

variant2: for each run define phi-averaged A for normalization channel (Dref,16) and then, divide Rijk on it, i.e. get RRijk

eta=27

eta=25

eta=23

eta=22

eta=21

eta=26

eta=24

eta=19

eta=17

eta=25

eta=23

eta=22

eta=21

eta=26

eta=24

eta=20

eta=19

eta=18

eta=27 L1=1

eta=25 L1=1

eta=23 L1=1

eta=22 L1=1

eta=21 L1=1

eta=29 L1=1

eta=26 L1=1

eta=24 L1=1

eta=20 L1=1

eta=19 L1=1

eta=18 L1=1

eta=17 L1=1

eta=28 L7=1

eta=27 L7=1

eta=25 L7=1

eta=23 L7=1

eta=22 L7=1

eta=21 L7=1

eta=26 L7=1

eta=24 L7=1

eta=20 L7=1

eta=19 L7=1

eta=18 L7=1

eta=17 L7=1

eta=27

eta=25

eta=23

eta=22

eta=21

eta=26

eta=24

eta=19

eta=17

eta=25

eta=23

eta=22

eta=21

eta=26

eta=24

eta=20

eta=19

eta=18

eta=27 L1=1

eta=25 L1=1

eta=23 L1=1

eta=22 L1=1

eta=21 L1=1

eta=26 L1=1

eta=24 L1=1

eta=20 L1=1

eta=19 L1=1

eta=18 L1=1

eta=17 L1=1

eta=28 L7=1

eta=27 L7=1

eta=25 L7=1

eta=23 L7=1

eta=22 L7=1

eta=21 L7=1

eta=26 L7=1

eta=24 L7=1

eta=20 L7=1

eta=19 L7=1

eta=18 L7=1

eta=17 L7=1

eta=27

eta=28

errA with average Amplitudes

Summed Amplitude Plots:

Summed Amplitude Plots:

Summed Amplitude Plots:

RBX:

errA with average Amplitudes

Summed Amplitude Plots:

Summed Amplitude Plots:

Summed Amplitude Plots:

RBX:

errA with average Amplitudes

Summed Amplitude Plots:

Summed Amplitude Plots:

Summed Amplitude Plots:

RBX:

Prepare maps of good/bad channels:

Definition at line 661 of file beamSpotDipStandalone.cc.

References writedatasetfile::args, beginServer(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamerCreator::create(), dip, endServer(), endTime, getDateTime(), polling(), sourceFile, sourceFile1, startTime, testing, and verbose.

                                  {
   // options
   verbose = strcmp(args[1], "true");
   testing = strcmp(args[2], "true");
 
   sourceFile = args[3];
   sourceFile1 = args[4];
 
   //
   startTime = getDateTime();
   endTime = getDateTime();
 
   dip = Dip::create("CmsBeamSpotServer");
   //  dip->setDNSNode("cmsdimns1.cern.ch");
   dip->setDNSNode("cmsdimns2.cern.ch");
 
   cerr << "reading from file (NFS)" << endl;
 
   //
   beginServer();
 
   cerr << "entering polling loop" << endl;
 
   while (true) {
     polling();
     sleep(1);
   }
 
   cerr << "[done]" << endl;
 
   //
   endServer();
 
   return 0;
 }

◆ parse()

vector<string> parse	(	string	line,
		const string &	delimiter
	)

Definition at line 141 of file beamSpotDipStandalone.cc.

References makeHLTPrescaleTable::delimiter, mps_splice::line, and unpackBuffers-CaloStage2::token.

Referenced by FWItemValueGetter::addEntry(), BoostedJetONNXJetTagsProducer::BoostedJetONNXJetTagsProducer(), reco::parser::cutParser(), DDTokenize2(), cand::parser::decayParser(), reco::parser::expressionParser(), DBSApi_cff::loadXML(), BeamSpotWorkflow::main(), helper::Parser::makeExpression(), helper::Parser::makeSelector(), FWGUIManager::open3DRegion(), DDLVector::parse_numbers(), DDLVector::parse_strings(), DDLMap::processElement(), cms::DDDetector::processXML(), readRcd(), loadConditions::readTagAndSince(), FWModelExpressionSelector::select(), FWModelFilter::setExpression(), FWExpressionEvaluator::setExpression(), BeamSpotDipServer::tkStatus(), and tkStatus().

                                                            {
   vector<string> list;
 
   size_t pos = 0;
   while ((pos = line.find(delimiter)) != string::npos) {
     string token = line.substr(0, pos);
 
     list.push_back(token);
 
     line.erase(0, pos + delimiter.length());
   }
 
   list.push_back(line);  // remainder
 
   return list;
 }

◆ polling()

void polling ( )

Definition at line 551 of file beamSpotDipStandalone.cc.

References alive, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, MillePedeFileConverter_cfg::e, cppFunctionSkipper::exception, fakeRcd(), getDateTime(), getFileSize(), getLastTime(), lastFitTime, lastModTime, heppy_check::logFile, lsCount, problem(), readRcd(), runnum, sourceFile, tkStatus(), createJobs::tmp, trueRcd(), and verbose.

Referenced by main().

                {
   try {
     ifstream logFile(sourceFile);
 
     if (!logFile.good()) {
       cerr << "Source File: " + sourceFile + " doesn't exist!" << endl;
       problem();
     } else {
       lastModTime = getLastTime(sourceFile);
 
       if (lastFitTime == 0)
         lastFitTime = lastModTime;
 
       if (getFileSize(sourceFile) == 0) {
         // source file has zero length
         if (lastModTime > lastFitTime) {
           string tmp = tkStatus();
           cerr << "New run starts. Run number: " << runnum << endl;
           if (verbose)
             cerr << "Initial lastModTime = " + getDateTime(lastModTime) << endl;
         }
         lastFitTime = lastModTime;
       }
 
       if (lastModTime > lastFitTime) {
         // source file modified
         if (verbose) {
           cerr << "time of last fit    = " + getDateTime(lastFitTime) << endl;
           cerr << "time of current fit = " + getDateTime(lastModTime) << endl;
         }
         lastFitTime = lastModTime;
 
         // source file length > 0
         if (getFileSize(sourceFile) > 0) {
           if (verbose)
             cerr << "reading record from " + sourceFile << endl;
 
           if (readRcd(logFile)) {
             if (verbose)
               cerr << "got new record from file" << endl;
 
             trueRcd();
             alive.reset();
             alive.flip(7);
           } else {
             if (verbose)
               cerr << "problem with new record" << endl;
             fakeRcd();
           }
 
           lsCount = 0;
         }
       } else {
         // source file not touched
         problem();
       }
     }
 
     logFile.close();
 
   } catch (exception& e) {
     cerr << "io exception (end of lumi): " << e.what() << endl;
   };
 }

◆ problem()

void problem ( )

Definition at line 513 of file beamSpotDipStandalone.cc.

References alive, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, fakeRcd(), lsCount, publishRcd(), secPerLS, timeoutLS, tkStatus(), trueRcd(), and verbose.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), and polling().

                {
   if (verbose)
     cerr << "no update | alive = " << alive << endl;
 
   lsCount++;
 
   if ((lsCount % (timeoutLS[0] * secPerLS) == 0) && (lsCount % (timeoutLS[1] * secPerLS) != 0))  // first timeout
   {
     if (!alive.test(1))
       alive.flip(1);
     if (!alive.test(2)) {
       if (!alive.test(7))
         fakeRcd();
       else
         trueRcd();
 
       stringstream warnMsg;
       warnMsg << "No new data for " << lsCount << " LS";
       publishRcd("Uncertain", warnMsg.str(), false, false);
     } else {
       fakeRcd();
 
       stringstream warnMsg;
       warnMsg << "No new data for " << lsCount << " LS: " << tkStatus();
       publishRcd("Bad", warnMsg.str(), false, false);
     }
   } else if (lsCount % (timeoutLS[1] * secPerLS) == 0) {  // second timeout
     if (!alive.test(2))
       alive.flip(2);
     fakeRcd();
 
     stringstream warnMsg;
     warnMsg << "No new data for " << lsCount << " LS: " << tkStatus();
     publishRcd("Bad", warnMsg.str(), false, false);
   }
 }

◆ publishRcd()

void publishRcd	(	string	qlty,
		string	err,
		bool	pubCMS,
		bool	fitTime
	)

Definition at line 278 of file beamSpotDipStandalone.cc.

References alive, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, currentLS, MillePedeFileConverter_cfg::e, endTimeStamp, submitPVResolutionJobs::err, cppFunctionSkipper::exception, intLS, messageCMS, messageLHC, messagePV, publicationCMS, publicationLHC, publicationPV, qualities, and verbose.

Referenced by beginServer(), BeamSpotDipServer::dqmBeginRun(), BeamSpotDipServer::dqmEndLuminosityBlock(), BeamSpotDipServer::problem(), and problem().

                                                                     {
   try {
     bool updateCMS = pubCMS && (currentLS % intLS == 0);
 
     if (verbose) {
       cerr << "sending (" << qlty << " | " << err << ")";
 
       if (alive.test(7)) {
         if (updateCMS)
           cerr << " to CCC and CMS";
         else if (!alive.test(1) && !alive.test(2))
           cerr << " to CCC only";
       }
 
       cerr << endl;
     }
 
     DipTimestamp zeit;
     if (fitTime) {
       long epoch;
       epoch = endTimeStamp * 1000;  // convert to ms
       zeit = DipTimestamp(epoch);
     } else
       zeit = DipTimestamp();
 
     // send
     if (updateCMS)
       publicationCMS->send(*messageCMS, zeit);
 
     publicationLHC->send(*messageLHC, zeit);
     publicationPV->send(*messagePV, zeit);
 
     // set qualities
 
     if (qlty == qualities[0]) {  // Uncertain
       if (updateCMS)
         publicationCMS->setQualityUncertain(err.c_str());
 
       publicationLHC->setQualityUncertain(err.c_str());
     } else if (qlty == qualities[1]) {  // Bad
       if (updateCMS)
         publicationCMS->setQualityBad(err.c_str());
 
       publicationLHC->setQualityBad(err.c_str());
     } else if (qlty == "UNINITIALIZED") {
       if (updateCMS)
         publicationCMS->setQualityBad("UNINITIALIZED");
 
       publicationLHC->setQualityBad("UNINITIALIZED");
     }
   } catch (exception& e) {
     cerr << "exception (publishRcd): " << e.what() << endl;
   }
 }

◆ readRcd()

bool readRcd ( ifstream & file )

Definition at line 334 of file beamSpotDipStandalone.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, currentLS, dxdz, dydz, MillePedeFileConverter_cfg::e, endTime, endTimeStamp, err_dxdz, err_dydz, err_meanPV, err_rmsPV, err_sigma_z, err_width_x, err_width_y, err_x, err_y, err_z, events, cppFunctionSkipper::exception, geometryDiff::file, getDateTime(), lumiRange, maxPV, meanPV, nPV, parse(), qualities, quality, AlCaHarvesting_cff::record, rmsPV, runnum, sigma_z, mathSSE::sqrt(), startTime, startTimeStamp, testing, createJobs::tmp, verbose, width_x, width_y, x, y, and z.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), and polling().

                              {
   int nthLnInRcd = 0;
   bool rcdQlty = false;
 
   try {
     string record;
     while (getline(file, record)) {
       nthLnInRcd++;
 
       vector<string> tmp = parse(record, " ");
 
       switch (nthLnInRcd) {
         case 1:
           if (record.rfind("Run", 0) != 0) {
             cerr << "Reading of results text file interrupted. " + getDateTime() << endl;
             return false;
           }
           runnum = stoi(tmp[1]);
           break;
         case 2:
           startTime = tmp[1] + " " + tmp[2] + " " + tmp[3];
           startTimeStamp = stol(tmp[4]);
           break;
         case 3:
           endTime = tmp[1] + " " + tmp[2] + " " + tmp[3];
           endTimeStamp = stol(tmp[4]);
           break;
         case 4:
           lumiRange = record.substr(10);
           if (verbose)
             cerr << "lumisection range: " + lumiRange << endl;
           currentLS = stoi(tmp[3]);
           break;
         case 5:
           type = stoi(tmp[1]);
           if (testing)
             quality = qualities[0];  // Uncertain
           else if (type >= 2)
             quality = qualities[2];  // Good
           else
             quality = qualities[1];  // Bad
           break;
 
         case 6:
           x = stof(tmp[1]);
           break;
         case 7:
           y = stof(tmp[1]);
           break;
         case 8:
           z = stof(tmp[1]);
           break;
 
         case 9:
           sigma_z = stof(tmp[1]);
           break;
         case 10:
           dxdz = stof(tmp[1]);
           break;
         case 11:
           dydz = stof(tmp[1]);
           break;
         case 12:
           width_x = stof(tmp[1]);
           break;
         case 13:
           width_y = stof(tmp[1]);
           break;
 
         case 14:
           err_x = sqrt(stof(tmp[1]));
           break;
         case 15:
           err_y = sqrt(stof(tmp[2]));
           break;
         case 16:
           err_z = sqrt(stof(tmp[3]));
           break;
         case 17:
           err_sigma_z = sqrt(stof(tmp[4]));
           break;
         case 18:
           err_dxdz = sqrt(stof(tmp[5]));
           break;
         case 19:
           err_dydz = sqrt(stof(tmp[6]));
           break;
         case 20:
           err_width_x = sqrt(stof(tmp[7]));
           err_width_y = err_width_x;
           break;
         case 21:
           break;
         case 22:
           break;
         case 23:
           break;
         case 24:
           events = stoi(tmp[1]);
           break;
 
         case 25:
           meanPV = stof(tmp[1]);
           break;
         case 26:
           err_meanPV = stof(tmp[1]);
           break;
         case 27:
           rmsPV = stof(tmp[1]);
           break;
         case 28:
           err_rmsPV = stof(tmp[1]);
           break;
         case 29:
           maxPV = stoi(tmp[1]);
           break;
         case 30:
           nPV = stoi(tmp[1]);
           rcdQlty = true;
           break;
 
         default:
           break;
       }
     }
 
     file.close();
   } catch (exception& e) {
     cerr << "io exception (readRcd): " << e.what() << endl;
   }
 
   return rcdQlty;
 }

◆ tkStatus()

string tkStatus ( )

Definition at line 469 of file beamSpotDipStandalone.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, MillePedeFileConverter_cfg::e, cppFunctionSkipper::exception, spr::find(), getFileSize(), dqmPostProcessing_online::logfile, parse(), AlCaHarvesting_cff::record, runnum, sourceFile1, and createJobs::tmp.

Referenced by BeamSpotDipServer::dqmEndLuminosityBlock(), polling(), BeamSpotDipServer::problem(), and problem().

                   {
   string outstr;
 
   ifstream logfile(sourceFile1);
 
   if (!logfile.good() || getFileSize(sourceFile1) == 0) {
     // file does not exist or has zero size
     outstr = "No CMS Tracker status available. No DAQ/DQM.";
   } else {
     int nthLnInRcd = 0;
     string record;
 
     try {
       string record;
 
       while (getline(logfile, record)) {
         nthLnInRcd++;
         vector<string> tmp = parse(record, " ");
 
         switch (nthLnInRcd) {
           case 7:
             if (tmp[1].find("Yes") == string::npos)
               outstr = "CMS Tracker OFF.";
             else
               outstr = "CMS not taking data or no beam.";
             break;
           case 8:
             runnum = stoi(tmp[1]);
             break;
           default:
             break;
         }
       }
     } catch (exception& e) {
       cerr << "exception (tkStatus): " << e.what() << endl;
     }
   }
 
   logfile.close();
 
   return outstr;
 }

◆ trueRcd()

void trueRcd ( )

Definition at line 190 of file beamSpotDipStandalone.cc.

References Centroid, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, cm2mm, cm2um, CMS2LHCRF_POS(), dxdz, dydz, MillePedeFileConverter_cfg::e, endTime, endTimeStamp, err_dxdz, err_dydz, err_meanPV, err_rmsPV, err_sigma_z, err_width_x, err_width_y, err_x, err_y, err_z, events, cppFunctionSkipper::exception, lumiRange, maxPV, meanPV, messageCMS, messageLHC, messagePV, nPV, publishStatErrors, quality, rad2urad, rmsPV, runnum, sigma_z, Size, startTime, startTimeStamp, Tilt, width_x, width_y, x, y, and z.

Referenced by beginServer(), BeamSpotDipServer::dqmBeginRun(), BeamSpotDipServer::dqmEndLuminosityBlock(), polling(), BeamSpotDipServer::problem(), and problem().

                {
   try {
     // CMS to LHC RF
     CMS2LHCRF_POS(x, y, z);
 
     Tilt[0] = dxdz * rad2urad;
     Tilt[1] = (dydz != 0 ? (dydz * -1 * rad2urad) : 0);
 
     Size[0] = width_x * cm2um;
     Size[1] = width_y * cm2um;
     Size[2] = sigma_z * cm2mm;
 
     // CMS
     messageCMS->insert(runnum, "runnum");
     messageCMS->insert(startTime, "startTime");
     messageCMS->insert(endTime, "endTime");
     messageCMS->insert(startTimeStamp, "startTimeStamp");
     messageCMS->insert(endTimeStamp, "endTimeStamp");
     messageCMS->insert(lumiRange, "lumiRange");
     messageCMS->insert(quality, "quality");
     messageCMS->insert(type, "type");  // Unknown=-1, Fake=0, Tracker=2(Good)
     messageCMS->insert(x, "x");
     messageCMS->insert(y, "y");
     messageCMS->insert(z, "z");
     messageCMS->insert(dxdz, "dxdz");
     messageCMS->insert(dydz, "dydz");
     messageCMS->insert(width_x, "width_x");
     messageCMS->insert(width_y, "width_y");
     messageCMS->insert(sigma_z, "sigma_z");
 
     if (publishStatErrors) {
       messageCMS->insert(err_x, "err_x");
       messageCMS->insert(err_y, "err_y");
       messageCMS->insert(err_z, "err_z");
       messageCMS->insert(err_dxdz, "err_dxdz");
       messageCMS->insert(err_dydz, "err_dydz");
       messageCMS->insert(err_width_x, "err_width_x");
       messageCMS->insert(err_width_y, "err_width_y");
       messageCMS->insert(err_sigma_z, "err_sigma_z");
     }
 
     // LHC
     messageLHC->insert(Size, 3, "Size");
     messageLHC->insert(Centroid, 3, "Centroid");
     messageLHC->insert(Tilt, 2, "Tilt");
 
     // PV
     messagePV->insert(runnum, "runnum");
     messagePV->insert(startTime, "startTime");
     messagePV->insert(endTime, "endTime");
     messagePV->insert(startTimeStamp, "startTimeStamp");
     messagePV->insert(endTimeStamp, "endTimeStamp");
     messagePV->insert(lumiRange, "lumiRange");
     messagePV->insert(events, "events");
     messagePV->insert(meanPV, "meanPV");
     messagePV->insert(err_meanPV, "err_meanPV");
     messagePV->insert(rmsPV, "rmsPV");
     messagePV->insert(err_rmsPV, "err_rmsPV");
     messagePV->insert(maxPV, "maxPV");
     messagePV->insert(nPV, "nPV");
   } catch (exception& e) {
     cerr << "exception (trueRcd): " << e.what() << endl;
   }
 }