AlignmentProducerBase.cc

Go to the documentation of this file.

#include "Alignment/CommonAlignmentProducer/interface/AlignmentProducerBase.h"

#include "Alignment/CommonAlignment/interface/AlignableExtras.h"
#include "Alignment/CommonAlignment/interface/SurveyDet.h"
#include "Alignment/CommonAlignmentAlgorithm/interface/AlignmentAlgorithmPluginFactory.h"
#include "Alignment/CommonAlignmentAlgorithm/interface/AlignmentParameterBuilder.h"
#include "Alignment/CommonAlignmentAlgorithm/interface/AlignmentParameterSelector.h"
#include "Alignment/CommonAlignmentAlgorithm/interface/IntegratedCalibrationPluginFactory.h"
#include "Alignment/CommonAlignmentMonitor/interface/AlignmentMonitorPluginFactory.h"
#include "Alignment/CommonAlignmentParametrization/interface/BeamSpotAlignmentParameters.h"
#include "Alignment/CommonAlignmentParametrization/interface/RigidBodyAlignmentParameters.h"
#include "Alignment/MuonAlignment/interface/MuonScenarioBuilder.h"
#include "Alignment/TrackerAlignment/interface/TrackerScenarioBuilder.h"

#include "CondCore/DBOutputService/interface/PoolDBOutputService.h"

#include "CondFormats/Alignment/interface/DetectorGlobalPosition.h"
#include "CondFormats/Alignment/interface/SurveyError.h"
#include "CondFormats/Alignment/interface/SurveyErrors.h"

#include "FWCore/Framework/interface/ESTransientHandle.h"
#include "FWCore/Framework/interface/Run.h"
#include "FWCore/ServiceRegistry/interface/Service.h"

#include "Geometry/TrackerGeometryBuilder/interface/TrackerGeomBuilderFromGeometricDet.h"

//------------------------------------------------------------------------------
AlignmentProducerBase::AlignmentProducerBase(const edm::ParameterSet& config, edm::ConsumesCollector iC)
    : doTracker_{config.getUntrackedParameter<bool>("doTracker")},
      doMuon_{config.getUntrackedParameter<bool>("doMuon")},
      useExtras_{config.getUntrackedParameter<bool>("useExtras")},
      tjTkAssociationMapTag_{config.getParameter<edm::InputTag>("tjTkAssociationMapTag")},
      beamSpotTag_{config.getParameter<edm::InputTag>("beamSpotTag")},
      tkLasBeamTag_{config.getParameter<edm::InputTag>("tkLasBeamTag")},
      clusterValueMapTag_{config.getParameter<edm::InputTag>("hitPrescaleMapTag")},
      uniqueRunRanges_{align::makeUniqueRunRanges(config.getParameter<edm::VParameterSet>("RunRangeSelection"),
                                                  cond::timeTypeSpecs[cond::runnumber].beginValue)},
      config_{config},
      stNFixAlignables_{config.getParameter<int>("nFixAlignables")},
      stRandomShift_{config.getParameter<double>("randomShift")},
      stRandomRotation_{config.getParameter<double>("randomRotation")},
      applyDbAlignment_{config.getUntrackedParameter<bool>("applyDbAlignment")},
      checkDbAlignmentValidity_{config.getUntrackedParameter<bool>("checkDbAlignmentValidity")},
      doMisalignmentScenario_{config.getParameter<bool>("doMisalignmentScenario")},
      saveToDB_{config.getParameter<bool>("saveToDB")},
      saveApeToDB_{config.getParameter<bool>("saveApeToDB")},
      saveDeformationsToDB_{config.getParameter<bool>("saveDeformationsToDB")},
      useSurvey_{config.getParameter<bool>("useSurvey")},
      enableAlignableUpdates_{config.getParameter<bool>("enableAlignableUpdates")},
      ttopoToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      geomDetToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      ptpToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      ptitpToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      dtGeomToken_(iC.esConsumes<edm::Transition::BeginRun>(edm::ESInputTag("", "idealForAlignmentProducerBase"))),
      cscGeomToken_(iC.esConsumes<edm::Transition::BeginRun>(edm::ESInputTag("", "idealForAlignmentProducerBase"))),
      gemGeomToken_(iC.esConsumes<edm::Transition::BeginRun>(edm::ESInputTag("", "idealForAlignmentProducerBase"))),
      tkAliToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      dtAliToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      cscAliToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      gemAliToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      tkAliErrToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      dtAliErrToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      cscAliErrToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      gemAliErrToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      tkSurfDefToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      gprToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      tkSurveyToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      tkSurvErrorToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      dtSurveyToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      dtSurvErrorToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      cscSurveyToken_(iC.esConsumes<edm::Transition::BeginRun>()),
      cscSurvErrorToken_(iC.esConsumes<edm::Transition::BeginRun>()) {
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::AlignmentProducerBase";

  const auto& algoConfig = config_.getParameterSet("algoConfig");
  if (config_.existsAs<bool>("runAtPCL")) {
    // configured in main config?
    runAtPCL_ = config_.getParameter<bool>("runAtPCL");

    if (algoConfig.existsAs<bool>("runAtPCL") && (runAtPCL_ != algoConfig.getParameter<bool>("runAtPCL"))) {
      throw cms::Exception("BadConfig") << "Inconsistent settings for 'runAtPCL' in configuration of the "
                                        << "alignment producer and the alignment algorithm.";
    }

  } else if (algoConfig.existsAs<bool>("runAtPCL")) {
    // configured in algo config?
    runAtPCL_ = algoConfig.getParameter<bool>("runAtPCL");

  } else {
    // assume 'false' if it was not configured
    runAtPCL_ = false;
  }

  createAlignmentAlgorithm(iC);
  createMonitors(iC);
  createCalibrations(iC);
}

//------------------------------------------------------------------------------
AlignmentProducerBase::~AlignmentProducerBase() noexcept(false) {}

//------------------------------------------------------------------------------
void AlignmentProducerBase::startProcessing() {
  if (isDuringLoop_)
    return;

  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::startProcessing"
                            << "Begin";

  if (!isAlgoInitialized_) {
    throw cms::Exception("LogicError") << "@SUB=AlignmentProducerBase::startProcessing\n"
                                       << "Trying to start event processing before initializing the alignment "
                                       << "algorithm.";
  }

  nevent_ = 0;

  alignmentAlgo_->startNewLoop();

  // FIXME: Should this be done in algorithm::startNewLoop()??
  for (const auto& iCal : calibrations_)
    iCal->startNewLoop();
  for (const auto& monitor : monitors_)
    monitor->startingNewLoop();

  applyAlignmentsToGeometry();
  isDuringLoop_ = true;
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::terminateProcessing(const edm::EventSetup* setup) {
  if (!isDuringLoop_)
    return;

  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::terminateProcessing"
                            << "Terminating algorithm.";
  if (setup) {
    alignmentAlgo_->terminate(*setup);
  } else {
    alignmentAlgo_->terminate();
  }

  // FIXME: Should this be done in algorithm::terminate()??
  for (const auto& iCal : calibrations_)
    iCal->endOfLoop();
  for (const auto& monitor : monitors_)
    monitor->endOfLoop();

  isDuringLoop_ = false;
}

//------------------------------------------------------------------------------
bool AlignmentProducerBase::processEvent(const edm::Event& event, const edm::EventSetup& setup) {
  if (setupChanged(setup)) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::processEvent"
                              << "EventSetup-Record changed.";

    // updatable alignables are currently not used at PCL, but event setup
    // changes require a complete re-initialization
    if (runAtPCL_) {
      initAlignmentAlgorithm(setup, /* update = */ false);
    } else if (enableAlignableUpdates_) {
      initAlignmentAlgorithm(setup, /* update = */ true);
    }
  }

  initBeamSpot(event);  // must happen every event and before incrementing 'nevent_'

  ++nevent_;  // must happen before the check below;
              // otherwise subsequent checks fail for "EmptySource"

  if (!alignmentAlgo_->processesEvents()) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::processEvent"
                              << "Skipping event. The current configuration of the alignment algorithm "
                              << "does not need to process any events.";
    return false;
  }

  // reading in survey records
  readInSurveyRcds(setup);

  // Printout event number
  for (int i = 10; i < 10000000; i *= 10) {
    if (nevent_ < 10 * i && (nevent_ % i) == 0) {
      edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::processEvent"
                                << "Events processed: " << nevent_;
    }
  }

  // Retrieve trajectories and tracks from the event
  // -> merely skip if collection is empty
  edm::Handle<TrajTrackAssociationCollection> handleTrajTracksCollection;

  if (getTrajTrackAssociationCollection(event, handleTrajTracksCollection)) {
    // Form pairs of trajectories and tracks
    ConstTrajTrackPairs trajTracks;
    for (auto iter = handleTrajTracksCollection->begin(); iter != handleTrajTracksCollection->end(); ++iter) {
      trajTracks.push_back(ConstTrajTrackPair(&(*(*iter).key), &(*(*iter).val)));
    }

    // Run the alignment algorithm with its input
    const AliClusterValueMap* clusterValueMapPtr{nullptr};
    if (!clusterValueMapTag_.encode().empty()) {
      edm::Handle<AliClusterValueMap> clusterValueMap;
      getAliClusterValueMap(event, clusterValueMap);
      clusterValueMapPtr = &(*clusterValueMap);
    }

    const AlignmentAlgorithmBase::EventInfo eventInfo{event.id(), trajTracks, *beamSpot_, clusterValueMapPtr};
    alignmentAlgo_->run(setup, eventInfo);

    for (const auto& monitor : monitors_) {
      monitor->duringLoop(event, setup, trajTracks);  // forward eventInfo?
    }
  } else {
    edm::LogError("Alignment") << "@SUB=AlignmentProducerBase::processEvent"
                               << "No track collection found: skipping event";
  }

  return true;
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::beginRunImpl(const edm::Run& run, const edm::EventSetup& setup) {
  const bool changed{setupChanged(setup)};
  if (changed) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::beginRunImpl"
                              << "EventSetup-Record changed.";

    // updatable alignables are currently not used at PCL, but event setup
    // changes require a complete re-initialization
    if (runAtPCL_) {
      initAlignmentAlgorithm(setup, /* update = */ false);
    } else if (enableAlignableUpdates_) {
      initAlignmentAlgorithm(setup, /* update = */ true);
    }
  }

  alignmentAlgo_->beginRun(run, setup, changed && (runAtPCL_ || enableAlignableUpdates_));

  for (const auto& iCal : calibrations_)
    iCal->beginRun(run, setup);

  //store the first run analyzed to be used for setting the IOV (for PCL)
  if (firstRun_ > static_cast<cond::Time_t>(run.id().run())) {
    firstRun_ = static_cast<cond::Time_t>(run.id().run());
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::endRunImpl(const edm::Run& run, const edm::EventSetup& setup) {
  if (!tkLasBeamTag_.encode().empty()) {
    edm::Handle<TkFittedLasBeamCollection> lasBeams;
    edm::Handle<TsosVectorCollection> tsoses;
    getTkFittedLasBeamCollection(run, lasBeams);
    getTsosVectorCollection(run, tsoses);

    alignmentAlgo_->endRun(EndRunInfo(run.id(), &(*lasBeams), &(*tsoses)), setup);
  } else {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::endRunImpl"
                              << "No Tk LAS beams to forward to algorithm.";
    alignmentAlgo_->endRun(EndRunInfo(run.id(), nullptr, nullptr), setup);
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::beginLuminosityBlockImpl(const edm::LuminosityBlock&, const edm::EventSetup& setup) {
  // Do not forward edm::LuminosityBlock
  alignmentAlgo_->beginLuminosityBlock(setup);
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::endLuminosityBlockImpl(const edm::LuminosityBlock&, const edm::EventSetup& setup) {
  // Do not forward edm::LuminosityBlock
  alignmentAlgo_->endLuminosityBlock(setup);
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::createAlignmentAlgorithm(edm::ConsumesCollector& iC) {
  auto algoConfig = config_.getParameter<edm::ParameterSet>("algoConfig");
  algoConfig.addUntrackedParameter("RunRangeSelection", config_.getParameter<edm::VParameterSet>("RunRangeSelection"));
  algoConfig.addUntrackedParameter<align::RunNumber>("firstIOV", runAtPCL_ ? 1 : uniqueRunRanges_.front().first);
  algoConfig.addUntrackedParameter("enableAlignableUpdates", enableAlignableUpdates_);

  const auto& algoName = algoConfig.getParameter<std::string>("algoName");
  alignmentAlgo_ = AlignmentAlgorithmPluginFactory::get()->create(algoName, algoConfig, iC);
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::createMonitors(edm::ConsumesCollector& iC) {
  const auto& monitorConfig = config_.getParameter<edm::ParameterSet>("monitorConfig");
  auto monitors = monitorConfig.getUntrackedParameter<std::vector<std::string> >("monitors");
  for (const auto& miter : monitors) {
    monitors_.emplace_back(
        AlignmentMonitorPluginFactory::get()->create(miter, monitorConfig.getUntrackedParameterSet(miter), iC));
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::createCalibrations(edm::ConsumesCollector& iC) {
  const auto& calibrations = config_.getParameter<edm::VParameterSet>("calibrations");
  for (const auto& iCalib : calibrations) {
    calibrations_.emplace_back(IntegratedCalibrationPluginFactory::get()->create(
        iCalib.getParameter<std::string>("calibrationName"), iCalib, iC));
  }
}

//------------------------------------------------------------------------------
bool AlignmentProducerBase::setupChanged(const edm::EventSetup& setup) {
  bool changed{false};

  if (watchIdealGeometryRcd_.check(setup)) {
    changed = true;
  }

  if (watchGlobalPositionRcd_.check(setup)) {
    changed = true;
  }

  if (doTracker_) {
    if (watchTrackerAlRcd_.check(setup)) {
      changed = true;
    }

    if (watchTrackerAlErrorExtRcd_.check(setup)) {
      changed = true;
    }

    if (watchTrackerSurDeRcd_.check(setup)) {
      changed = true;
    }
  }

  if (doMuon_) {
    if (watchDTAlRcd_.check(setup)) {
      changed = true;
    }

    if (watchDTAlErrExtRcd_.check(setup)) {
      changed = true;
    }

    if (watchCSCAlRcd_.check(setup)) {
      changed = true;
    }

    if (watchCSCAlErrExtRcd_.check(setup)) {
      changed = true;
    }
  }

  /* TODO: ExtraAlignables: Which record(s) to check?
   *
   if (useExtras_) {}
  */

  return changed;
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::initAlignmentAlgorithm(const edm::EventSetup& setup, bool update) {
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::initAlignmentAlgorithm"
                            << "Begin";

  auto isTrueUpdate = update && isAlgoInitialized_;

  // Retrieve tracker topology from geometry
  const TrackerTopology* const tTopo = &setup.getData(ttopoToken_);

  // Create the geometries from the ideal geometries
  createGeometries(setup, tTopo);

  applyAlignmentsToDB(setup);
  createAlignables(tTopo, isTrueUpdate);
  buildParameterStore();
  applyMisalignment();

  // Initialize alignment algorithm and integrated calibration and pass the
  // latter to algorithm
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::initAlignmentAlgorithm"
                            << "Initializing alignment algorithm.";
  alignmentAlgo_->initialize(
      setup, alignableTracker_.get(), alignableMuon_.get(), alignableExtras_.get(), alignmentParameterStore_.get());

  // Not all algorithms support calibrations - so do not pass empty vector
  // and throw if non-empty and not supported:
  if (!calibrations_.empty()) {
    if (alignmentAlgo_->supportsCalibrations()) {
      alignmentAlgo_->addCalibrations(calibrations_);
    } else {
      throw cms::Exception("BadConfig") << "@SUB=AlignmentProducerBase::createCalibrations\n"
                                        << "Configured " << calibrations_.size() << " calibration(s) "
                                        << "for algorithm not supporting it.";
    }
  }

  isAlgoInitialized_ = true;

  applyAlignmentsToGeometry();

  if (!isTrueUpdate) {  // only needed the first time
    for (const auto& iCal : calibrations_) {
      iCal->beginOfJob(alignableTracker_.get(), alignableMuon_.get(), alignableExtras_.get());
    }
    for (const auto& monitor : monitors_) {
      monitor->beginOfJob(alignableTracker_.get(), alignableMuon_.get(), alignmentParameterStore_.get());
    }
  }
  startProcessing();  // needed if derived class is non-EDLooper-based
                      // has no effect, if called during loop

  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::initAlignmentAlgorithm"
                            << "End";
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::initBeamSpot(const edm::Event& event) {
  getBeamSpot(event, beamSpot_);

  if (nevent_ == 0 && alignableExtras_) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::initBeamSpot"
                              << "Initializing AlignableBeamSpot";

    alignableExtras_->initializeBeamSpot(
        beamSpot_->x0(), beamSpot_->y0(), beamSpot_->z0(), beamSpot_->dxdz(), beamSpot_->dydz());
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::createGeometries(const edm::EventSetup& iSetup, const TrackerTopology* tTopo) {
  if (doTracker_) {
    const GeometricDet* geometricDet = &iSetup.getData(geomDetToken_);
    const PTrackerParameters* ptp = &iSetup.getData(ptpToken_);
    const PTrackerAdditionalParametersPerDet* ptitp = &iSetup.getData(ptitpToken_);
    TrackerGeomBuilderFromGeometricDet trackerBuilder;
    trackerGeometry_ = std::shared_ptr<TrackerGeometry>(trackerBuilder.build(geometricDet, ptitp, *ptp, tTopo));
  }

  if (doMuon_) {
    muonDTGeometry_ = iSetup.getHandle(dtGeomToken_);
    muonCSCGeometry_ = iSetup.getHandle(cscGeomToken_);
    muonGEMGeometry_ = iSetup.getHandle(gemGeomToken_);
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::applyAlignmentsToDB(const edm::EventSetup& setup) {
  // Retrieve and apply alignments, if requested (requires z setup)
  if (applyDbAlignment_) {
    // we need GlobalPositionRcd - and have to keep track for later removal
    // before writing again to DB...

    const Alignments* globalAlignments = &setup.getData(gprToken_);
    globalPositions_ = std::make_unique<Alignments>(*globalAlignments);

    if (doTracker_) {
      applyDB<TrackerGeometry, TrackerAlignmentRcd, TrackerAlignmentErrorExtendedRcd>(
          trackerGeometry_.get(),
          setup,
          tkAliToken_,
          tkAliErrToken_,
          align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Tracker)));

      applyDB<TrackerGeometry, TrackerSurfaceDeformationRcd>(trackerGeometry_.get(), setup, tkSurfDefToken_);
    }

    if (doMuon_) {
      applyDB<DTGeometry, DTAlignmentRcd, DTAlignmentErrorExtendedRcd>(
          &*muonDTGeometry_,
          setup,
          dtAliToken_,
          dtAliErrToken_,
          align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon)));

      applyDB<CSCGeometry, CSCAlignmentRcd, CSCAlignmentErrorExtendedRcd>(
          &*muonCSCGeometry_,
          setup,
          cscAliToken_,
          cscAliErrToken_,
          align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon)));

      applyDB<GEMGeometry, GEMAlignmentRcd, GEMAlignmentErrorExtendedRcd>(
          &*muonGEMGeometry_,
          setup,
          gemAliToken_,
          gemAliErrToken_,
          align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon)));
    }
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::createAlignables(const TrackerTopology* tTopo, bool update) {
  if (doTracker_) {
    if (update) {
      alignableTracker_->update(trackerGeometry_.get(), tTopo);
    } else {
      alignableTracker_ = std::make_unique<AlignableTracker>(trackerGeometry_.get(), tTopo);
    }
  }

  if (doMuon_) {
    if (update) {
      alignableMuon_->update(&*muonDTGeometry_, &*muonCSCGeometry_, &*muonGEMGeometry_);
    } else {
      alignableMuon_ = std::make_unique<AlignableMuon>(&*muonDTGeometry_, &*muonCSCGeometry_, &*muonGEMGeometry_);
    }
  }

  if (useExtras_) {
    if (update) {
      // FIXME: Requires further code changes to track beam spot condition changes
    } else {
      alignableExtras_ = std::make_unique<AlignableExtras>();
    }
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::buildParameterStore() {
  // Create alignment parameter builder
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::buildParameterStore"
                            << "Creating AlignmentParameterBuilder";

  const auto& alParamBuildCfg = config_.getParameter<edm::ParameterSet>("ParameterBuilder");
  const auto& alParamStoreCfg = config_.getParameter<edm::ParameterSet>("ParameterStore");

  AlignmentParameterBuilder alignmentParameterBuilder{
      alignableTracker_.get(), alignableMuon_.get(), alignableExtras_.get(), alParamBuildCfg};

  // Fix alignables if requested
  if (stNFixAlignables_ > 0) {
    alignmentParameterBuilder.fixAlignables(stNFixAlignables_);
  }

  // Get list of alignables
  const auto& alignables = alignmentParameterBuilder.alignables();
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::buildParameterStore"
                            << "got " << alignables.size() << " alignables";

  // Create AlignmentParameterStore
  alignmentParameterStore_ = std::make_unique<AlignmentParameterStore>(alignables, alParamStoreCfg);
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::buildParameterStore"
                            << "AlignmentParameterStore created!";
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::applyMisalignment() {
  // Apply misalignment scenario to alignable tracker and muon if requested
  // WARNING: this assumes scenarioConfig can be passed to both muon and tracker

  if (doMisalignmentScenario_ && (doTracker_ || doMuon_)) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::applyMisalignment"
                              << "Applying misalignment scenario to " << (doTracker_ ? "tracker" : "")
                              << (doMuon_ ? (doTracker_ ? " and muon" : "muon") : ".");

    const auto& scenarioConfig = config_.getParameterSet("MisalignmentScenario");

    if (doTracker_) {
      TrackerScenarioBuilder scenarioBuilder(alignableTracker_.get());
      scenarioBuilder.applyScenario(scenarioConfig);
    }
    if (doMuon_) {
      MuonScenarioBuilder muonScenarioBuilder(alignableMuon_.get());
      muonScenarioBuilder.applyScenario(scenarioConfig);
    }

  } else {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::applyMisalignment"
                              << "NOT applying misalignment scenario!";
  }

  // Apply simple misalignment
  const auto& sParSel = config_.getParameter<std::string>("parameterSelectorSimple");
  simpleMisalignment(alignmentParameterStore_->alignables(), sParSel, stRandomShift_, stRandomRotation_, true);
}

// ----------------------------------------------------------------------------
void AlignmentProducerBase::simpleMisalignment(
    const align::Alignables& alivec, const std::string& selection, float shift, float rot, bool local) {
  std::ostringstream output;  // collecting output

  if (shift > 0. || rot > 0.) {
    output << "Adding random flat shift of max size " << shift << " and adding random flat rotation of max size " << rot
           << " to ";

    std::vector<bool> commSel(0);
    if (selection != "-1") {
      AlignmentParameterSelector aSelector(nullptr, nullptr);  // no alignable needed here...
      const std::vector<char> cSel(aSelector.convertParamSel(selection));
      if (cSel.size() < RigidBodyAlignmentParameters::N_PARAM) {
        throw cms::Exception("BadConfig")
            << "[AlignmentProducerBase::simpleMisalignment_]\n"
            << "Expect selection string '" << selection << "' to be at least of length "
            << RigidBodyAlignmentParameters::N_PARAM << " or to be '-1'.\n"
            << "(Most probably you have to adjust the parameter 'parameterSelectorSimple'.)";
      }
      for (const auto& cIter : cSel) {
        commSel.push_back(cIter == '0' ? false : true);
      }
      output << "parameters defined by (" << selection << "), representing (x,y,z,alpha,beta,gamma),";
    } else {
      output << "the active parameters of each alignable,";
    }
    output << " in " << (local ? "local" : "global") << " frame.";

    for (const auto& ali : alivec) {
      std::vector<bool> mysel(commSel.empty() ? ali->alignmentParameters()->selector() : commSel);

      if (std::abs(shift) > 0.00001) {
        double s0 = 0., s1 = 0., s2 = 0.;
        if (mysel[RigidBodyAlignmentParameters::dx])
          s0 = shift * double(random() % 1000 - 500) / 500.;
        if (mysel[RigidBodyAlignmentParameters::dy])
          s1 = shift * double(random() % 1000 - 500) / 500.;
        if (mysel[RigidBodyAlignmentParameters::dz])
          s2 = shift * double(random() % 1000 - 500) / 500.;

        if (local)
          ali->move(ali->surface().toGlobal(align::LocalVector(s0, s1, s2)));
        else
          ali->move(align::GlobalVector(s0, s1, s2));

        //AlignmentPositionError ape(dx,dy,dz);
        //ali->addAlignmentPositionError(ape);
      }

      if (std::abs(rot) > 0.00001) {
        align::EulerAngles r(3);
        if (mysel[RigidBodyAlignmentParameters::dalpha])
          r(1) = rot * double(random() % 1000 - 500) / 500.;
        if (mysel[RigidBodyAlignmentParameters::dbeta])
          r(2) = rot * double(random() % 1000 - 500) / 500.;
        if (mysel[RigidBodyAlignmentParameters::dgamma])
          r(3) = rot * double(random() % 1000 - 500) / 500.;

        const align::RotationType mrot = align::toMatrix(r);
        if (local)
          ali->rotateInLocalFrame(mrot);
        else
          ali->rotateInGlobalFrame(mrot);

        //ali->addAlignmentPositionErrorFromRotation(mrot);
      }
    }  // end loop on alignables
  } else {
    output << "No simple misalignment added!";
  }
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::simpleMisalignment" << output.str();
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::applyAlignmentsToGeometry() {
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::applyAlignmentsToGeometry"
                            << "Now physically apply alignments to  geometry...";

  // Propagate changes to reconstruction geometry (from initialisation or iteration)
  GeometryAligner aligner;

  if (doTracker_) {
    if (!alignableTracker_) {
      throw cms::Exception("LogicError") << "@SUB=AlignmentProducerBase::applyAlignmentsToGeometry\n"
                                         << "Trying to apply tracker alignment before creating it.";
    }

    std::unique_ptr<Alignments> alignments{alignableTracker_->alignments()};
    std::unique_ptr<AlignmentErrorsExtended> alignmentErrExt{alignableTracker_->alignmentErrors()};
    std::unique_ptr<AlignmentSurfaceDeformations> aliDeforms{alignableTracker_->surfaceDeformations()};

    aligner.applyAlignments(trackerGeometry_.get(), alignments.get(), alignmentErrExt.get(), AlignTransform());
    aligner.attachSurfaceDeformations(trackerGeometry_.get(), aliDeforms.get());
  }

  if (doMuon_) {
    if (!alignableMuon_) {
      throw cms::Exception("LogicError") << "@SUB=AlignmentProducerBase::applyAlignmentsToGeometry\n"
                                         << "Trying to apply muon alignment before creating it.";
    }

    std::unique_ptr<Alignments> dtAlignments{alignableMuon_->dtAlignments()};
    std::unique_ptr<Alignments> cscAlignments{alignableMuon_->cscAlignments()};
    std::unique_ptr<Alignments> gemAlignments{alignableMuon_->gemAlignments()};

    std::unique_ptr<AlignmentErrorsExtended> dtAlignmentErrExt{alignableMuon_->dtAlignmentErrorsExtended()};
    std::unique_ptr<AlignmentErrorsExtended> cscAlignmentErrExt{alignableMuon_->cscAlignmentErrorsExtended()};
    std::unique_ptr<AlignmentErrorsExtended> gemAlignmentErrExt{alignableMuon_->gemAlignmentErrorsExtended()};

    aligner.applyAlignments(&*muonDTGeometry_, dtAlignments.get(), dtAlignmentErrExt.get(), AlignTransform());
    aligner.applyAlignments(&*muonCSCGeometry_, cscAlignments.get(), cscAlignmentErrExt.get(), AlignTransform());
    aligner.applyAlignments(&*muonGEMGeometry_, gemAlignments.get(), gemAlignmentErrExt.get(), AlignTransform());
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::readInSurveyRcds(const edm::EventSetup& iSetup) {
  // Get Survey Rcds and add Survey Info
  if (doTracker_ && useSurvey_) {
    bool tkSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool tkSurveyErrBool = watchTkSurveyErrExtRcd_.check(iSetup);
    edm::LogInfo("Alignment") << "watcher tksurveyrcd: " << tkSurveyBool;
    edm::LogInfo("Alignment") << "watcher tksurveyerrrcd: " << tkSurveyErrBool;
    if (tkSurveyBool || tkSurveyErrBool) {
      edm::LogInfo("Alignment") << "ADDING THE SURVEY INFORMATION";
      const Alignments* surveys = &iSetup.getData(tkSurveyToken_);
      const SurveyErrors* surveyErrors = &iSetup.getData(tkSurvErrorToken_);

      surveyIndex_ = 0;
      surveyValues_ = &*surveys;
      surveyErrors_ = &*surveyErrors;
      addSurveyInfo(alignableTracker_.get());
    }
  }

  if (doMuon_ && useSurvey_) {
    bool DTSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool DTSurveyErrBool = watchTkSurveyErrExtRcd_.check(iSetup);
    bool CSCSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool CSCSurveyErrBool = watchTkSurveyErrExtRcd_.check(iSetup);

    if (DTSurveyBool || DTSurveyErrBool || CSCSurveyBool || CSCSurveyErrBool) {
      const Alignments* dtSurveys = &iSetup.getData(dtSurveyToken_);
      const SurveyErrors* dtSurveyErrors = &iSetup.getData(dtSurvErrorToken_);
      const Alignments* cscSurveys = &iSetup.getData(cscSurveyToken_);
      const SurveyErrors* cscSurveyErrors = &iSetup.getData(cscSurvErrorToken_);

      surveyIndex_ = 0;
      surveyValues_ = &*dtSurveys;
      surveyErrors_ = &*dtSurveyErrors;
      const auto& barrels = alignableMuon_->DTBarrel();
      for (const auto& barrel : barrels)
        addSurveyInfo(barrel);

      surveyIndex_ = 0;
      surveyValues_ = &*cscSurveys;
      surveyErrors_ = &*cscSurveyErrors;
      const auto& endcaps = alignableMuon_->CSCEndcaps();
      for (const auto& endcap : endcaps)
        addSurveyInfo(endcap);
    }
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::addSurveyInfo(Alignable* ali) {
  const auto& comps = ali->components();

  for (const auto& comp : comps)
    addSurveyInfo(comp);

  const SurveyError& error = surveyErrors_->m_surveyErrors[surveyIndex_];

  if (ali->id() != error.rawId() || ali->alignableObjectId() != error.structureType()) {
    throw cms::Exception("DatabaseError") << "Error reading survey info from DB. Mismatched id!";
  }

  const auto& pos = surveyValues_->m_align[surveyIndex_].translation();
  const auto& rot = surveyValues_->m_align[surveyIndex_].rotation();

  AlignableSurface surf(
      align::PositionType(pos.x(), pos.y(), pos.z()),
      align::RotationType(rot.xx(), rot.xy(), rot.xz(), rot.yx(), rot.yy(), rot.yz(), rot.zx(), rot.zy(), rot.zz()));

  surf.setWidth(ali->surface().width());
  surf.setLength(ali->surface().length());

  ali->setSurvey(new SurveyDet(surf, error.matrix()));

  ++surveyIndex_;
}

//------------------------------------------------------------------------------
bool AlignmentProducerBase::finish() {
  for (const auto& monitor : monitors_)
    monitor->endOfJob();

  if (alignmentAlgo_->processesEvents() && nevent_ == 0) {
    return false;
  }

  if (saveToDB_ || saveApeToDB_ || saveDeformationsToDB_) {
    if (alignmentAlgo_->storeAlignments())
      storeAlignmentsToDB();
  } else {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::finish"
                              << "No payload to be stored!";
  }

  // takes care of storing output of calibrations, but needs to be called only
  // after 'storeAlignmentsToDB()'
  for (const auto& iCal : calibrations_)
    iCal->endOfJob();

  return true;
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::storeAlignmentsToDB() {
  const auto runRangeSelectionVPSet = config_.getParameterSetVector("RunRangeSelection");

  // handle PCL use case
  const auto& uniqueRunRanges =
      (runAtPCL_ ? align::makeUniqueRunRanges(runRangeSelectionVPSet, firstRun_) : uniqueRunRanges_);

  std::vector<AlgebraicVector> beamSpotParameters;

  for (const auto& iRunRange : uniqueRunRanges) {
    alignmentAlgo_->setParametersForRunRange(iRunRange);

    // Save alignments to database
    if (saveToDB_ || saveApeToDB_ || saveDeformationsToDB_) {
      writeForRunRange(iRunRange.first);
    }

    // Deal with extra alignables, e.g. beam spot
    if (alignableExtras_) {
      auto& alis = alignableExtras_->beamSpot();
      if (!alis.empty()) {
        auto beamSpotAliPars = dynamic_cast<BeamSpotAlignmentParameters*>(alis[0]->alignmentParameters());
        if (!beamSpotAliPars) {
          throw cms::Exception("LogicError") << "@SUB=AlignmentProducerBase::storeAlignmentsToDB\n"
                                             << "First alignable of alignableExtras_ does not have "
                                             << "'BeamSpotAlignmentParameters', while it should have.";
        }

        beamSpotParameters.push_back(beamSpotAliPars->parameters());
      }
    }
  }

  if (alignableExtras_) {
    std::ostringstream bsOutput;

    auto itPar = beamSpotParameters.cbegin();
    for (auto iRunRange = uniqueRunRanges.cbegin(); iRunRange != uniqueRunRanges.cend(); ++iRunRange, ++itPar) {
      bsOutput << "Run range: " << (*iRunRange).first << " - " << (*iRunRange).second << "\n";
      bsOutput << "  Displacement: x=" << (*itPar)[0] << ", y=" << (*itPar)[1] << "\n";
      bsOutput << "  Slope: dx/dz=" << (*itPar)[2] << ", dy/dz=" << (*itPar)[3] << "\n";
    }

    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::storeAlignmentsToDB"
                              << "Parameters for alignable beamspot:\n"
                              << bsOutput.str();
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::writeForRunRange(cond::Time_t time) {
  if (doTracker_ and alignableTracker_) {          // first tracker
    const AlignTransform* trackerGlobal{nullptr};  // will be 'removed' from constants
    if (globalPositions_) {                        // i.e. applied before in applyDB
      trackerGlobal = &align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Tracker));
    }

    auto alignments = alignableTracker_->alignments();
    auto alignmentErrors = alignableTracker_->alignmentErrors();
    this->writeDB(
        alignments, "TrackerAlignmentRcd", alignmentErrors, "TrackerAlignmentErrorExtendedRcd", trackerGlobal, time);

    // Save surface deformations to database
    if (saveDeformationsToDB_) {
      const auto alignmentSurfaceDeformations = *(alignableTracker_->surfaceDeformations());
      this->writeDB(alignmentSurfaceDeformations, "TrackerSurfaceDeformationRcd", time);
    }
  }

  if (doMuon_ and alignableMuon_) {             // now muon
    const AlignTransform* muonGlobal{nullptr};  // will be 'removed' from constants
    if (globalPositions_) {                     // i.e. applied before in applyDB
      muonGlobal = &align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon));
    }
    // Get alignments+errors, first DT - ownership taken over by writeDB(..), so no delete
    auto alignments = alignableMuon_->dtAlignments();
    auto alignmentErrors = alignableMuon_->dtAlignmentErrorsExtended();
    this->writeDB(alignments, "DTAlignmentRcd", alignmentErrors, "DTAlignmentErrorExtendedRcd", muonGlobal, time);

    // Get alignments+errors, now CSC - ownership taken over by writeDB(..), so no delete
    alignments = alignableMuon_->cscAlignments();
    alignmentErrors = alignableMuon_->cscAlignmentErrorsExtended();
    this->writeDB(alignments, "CSCAlignmentRcd", alignmentErrors, "CSCAlignmentErrorExtendedRcd", muonGlobal, time);
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::writeDB(Alignments* alignments,
                                    const std::string& alignRcd,
                                    AlignmentErrorsExtended* alignmentErrors,
                                    const std::string& errRcd,
                                    const AlignTransform* globalCoordinates,
                                    cond::Time_t time) const {
  Alignments tempAlignments = *alignments;
  AlignmentErrorsExtended tempAlignmentErrorsExtended = *alignmentErrors;

  // Call service
  edm::Service<cond::service::PoolDBOutputService> poolDb;
  if (!poolDb.isAvailable()) {  // Die if not available
    throw cms::Exception("NotAvailable") << "PoolDBOutputService not available";
  }

  if (globalCoordinates  // happens only if (applyDbAlignment_ == true)
      && globalCoordinates->transform() != AlignTransform::Transform::Identity) {
    Alignments tempAlignments{};                            // temporary storage for
    AlignmentErrorsExtended tempAlignmentErrorsExtended{};  // final alignments and errors

    GeometryAligner aligner;
    aligner.removeGlobalTransform(
        alignments, alignmentErrors, *globalCoordinates, &tempAlignments, &tempAlignmentErrorsExtended);

    delete alignments;       // have to delete original alignments
    delete alignmentErrors;  // same thing for the errors

    edm::LogInfo("Alignment") << "@SUB=AlignmentProducerBase::writeDB"
                              << "globalCoordinates removed from alignments (" << alignRcd << ") and errors ("
                              << alignRcd << ").";
  }

  if (saveToDB_) {
    edm::LogInfo("Alignment") << "Writing Alignments for run " << time << " to " << alignRcd << ".";
    poolDb->writeOneIOV<Alignments>(tempAlignments, time, alignRcd);
  }

  if (saveApeToDB_) {
    edm::LogInfo("Alignment") << "Writing AlignmentErrorsExtended for run " << time << " to " << errRcd << ".";
    poolDb->writeOneIOV<AlignmentErrorsExtended>(tempAlignmentErrorsExtended, time, errRcd);
  }
}

//------------------------------------------------------------------------------
void AlignmentProducerBase::writeDB(const AlignmentSurfaceDeformations& alignmentSurfaceDeformations,
                                    const std::string& surfaceDeformationRcd,
                                    cond::Time_t time) const {
  // Call service
  edm::Service<cond::service::PoolDBOutputService> poolDb;
  if (!poolDb.isAvailable()) {  // Die if not available
    throw cms::Exception("NotAvailable") << "PoolDBOutputService not available";
  }

  if (saveDeformationsToDB_) {
    edm::LogInfo("Alignment") << "Writing AlignmentSurfaceDeformations for run " << time << " to "
                              << surfaceDeformationRcd << ".";
    poolDb->writeOneIOV<AlignmentSurfaceDeformations>(alignmentSurfaceDeformations, time, surfaceDeformationRcd);
  }
}