MaterialProperties.cc

Go to the documentation of this file.

 
#include "Alignment/LaserAlignmentSimulation/interface/MaterialProperties.h"
#include "G4LogicalVolumeStore.hh"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
#include "G4SystemOfUnits.hh"
 
MaterialProperties::MaterialProperties(int DebugLevel, double SiAbsLengthScale)
    : theMaterialTable(),
      theMPDebugLevel(0),
      theSiAbsLengthScalingFactor(0),
      theMPT(),
      theTECWafer(),
      theTOBWafer(),
      theTIBWafer() {
  theMPDebugLevel = DebugLevel;
  theSiAbsLengthScalingFactor = SiAbsLengthScale;
  /* *********************************************************************** */
  /*
  define the materials for the sensitive detectors in TEC, TIB and TOB
          we need this to specify different properties for Barrel and Endcap
          detectors, which is by default no longer possible in CMSSW due to
          the fact that all modules are made out of the same G4Material
  */
  /* *********************************************************************** */
  G4double theDensity = 2.33 * g / cm3;
  G4double theAtomicWeight = 28.09 * g / mole;
  G4double theAtomicNumber = 14.0;
 
  theTECWafer = new G4Material("TEC_Wafer", theAtomicNumber, theAtomicWeight, theDensity);
  theTOBWafer = new G4Material("TOB_Wafer", theAtomicNumber, theAtomicWeight, theDensity);
  theTIBWafer = new G4Material("TIB_Wafer", theAtomicNumber, theAtomicWeight, theDensity);
 
  // set the properties of the materials
  setMaterialProperties();
}
 
MaterialProperties::~MaterialProperties() {
  if (theMPT != nullptr) {
    delete theMPT;
  }
  if (theTECWafer != nullptr) {
    delete theTECWafer;
  }
  if (theTOBWafer != nullptr) {
    delete theTOBWafer;
  }
  if (theTIBWafer != nullptr) {
    delete theTIBWafer;
  }
}
 
void MaterialProperties::setMaterialProperties() {
  /* *********************************************************************** */
  /*
  use this function to define material properties (like refraction
          index, absorptionlenght and so on) and add them to the
          MaterialPropertiesTable. Finally set the MPT to a give Material.
  */
  /* *********************************************************************** */
 
  // get the MaterialTable as it is defined in OSCAR (CMSSW now)
  theMaterialTable = G4Material::GetMaterialTable();
 
  /* *********************************************************************** */
  /*
  with the following code one can access the MaterialTable defined in
          OSCAR. This contains all the materials needed for the CMS detector,
          which are defined in the Geometry and DDD packages. COBRA takes care
          of the proper conversion between a DDMaterial and a G4Material.
  */
  /* *********************************************************************** */
 
  //   if (theMPDebugLevel > 1)
  //     {
  // print the materialtable
  LogDebug("SimLaserAlignment:MaterialProperties")
      << " **** here comes the material table **** " << *(G4Material::GetMaterialTable());
  //     }
 
  // define the MateriapropertiesTable for the Sensitive Regions in the Tracker
  // TOB_Wafer, TOB_Silicon, TID_Wafer, TIB_Wafer and TEC_Wafer
 
  const G4int nEntries = 3;
 
  // Photon energies
  G4double PhotonEnergy[nEntries] = {1.10 * eV, 1.15 * eV, 1.20 * eV};
 
  // scintillation
  G4double Scintillation[nEntries] = {0.1, 1.0, 0.1};
 
  // Refractive Index
  G4double RefractiveIndex[nEntries] = {3.5400, 3.5425, 3.5450};
  // Refractive Index of the Mirrors (BK7)
  G4double RefractiveIndexMirror[nEntries] = {1.50669, 1.50669, 1.50669};
 
  /* *********************************************************************** */
  /*  set the refractive index for the other materials to 1.0. This is       *
   *  needed to propagate the optical photons through the detector according *
   *  to Peter Gumplinger.                                                   */
  /* *********************************************************************** */
  G4double RefractiveIndexGeneral[nEntries] = {1.0, 1.0, 1.0};
 
  // Absorption Length
  // G4double AbsorptionLengthSi[nEntries] = { 198.8 * micrometer, 198.8 *
  // micrometer, 198.8 * micrometer }; ///////////////////////////////////
  G4double AbsorptionLengthSi[nEntries] = {1136 * micrometer, 1136 * micrometer, 1136 * micrometer};
 
  G4double AbsorptionLengthSiBarrel[nEntries] = {0.1 * fermi, 0.1 * fermi, 0.1 * fermi};
 
  // Absorption length of the mirrors
  G4double AbsorptionLengthMirror[nEntries] = {11.7 * cm, 0.5 * 11.7 * cm, 11.7 * cm};
 
  // Absorption Length for dead material in the tracker; set to small values
  // to kill the optical photons outside the TEC. Maybe this is later a problem
  // when implementing Ray 1 to connect both TECs which eachother and with TIB
  // and TOB!??
  G4double AbsorptionLengthDead[nEntries] = {0.001 * micrometer, 0.001 * micrometer, 0.001 * micrometer};
 
  // Absorption Length of the other Materials in the Tracker
  G4double AbsorptionLengthGeneral[nEntries] = {75 * cm, 75 * cm, 75 * cm};
 
  // Absorption Length of the Air in the Tracker
  G4double AbsorptionLengthTAir[nEntries] = {10 * m, 1.8 * m, 10 * m};
 
  G4double AbsorptionLengthAl[nEntries] = {10 * mm, 10 * mm, 10 * mm};
  G4double AbsorptionLengthTOB_CF_Str[nEntries] = {1 * cm, 10 * cm, 1 * cm};
  G4double AbsorptionLengthTOBCF[nEntries] = {0.1 * mm, 20 * mm, 0.1 * mm};
  G4double AbsorptionLengthTIBCF[nEntries] = {15.0 * cm, 15.0 * cm, 15.0 * cm};
 
  // Reflectivity of the modules
  G4double SiReflectivity[nEntries] = {0.0, 0.0, 0.0};
 
  // Efficiency of the modules
  G4double TECEfficiency[nEntries] = {0.9, 0.9, 0.9};
  G4double BarrelEfficiency[nEntries] = {1.0, 1.0, 1.0};
 
  // Reflectivity of the mirrors in the Alignment Tubes
  G4double Reflectivity[nEntries] = {0.05, 0.05, 0.05};
 
  /* *********************************************************************** */
 
  /* *********************************************************************** */
  /*
  define the materials for the sensitive detectors in TEC, TIB and TOB
          we need this to specify different properties for Barrel and Endcap
          detectors, which is by default no longer possible in CMSSW due to
          the fact that all modules are made out of the same G4Material
  */
  /* *********************************************************************** */
 
  // set the options for the materials
  {
    for (G4MaterialTable::const_iterator theMTEntry = theMaterialTable->begin(); theMTEntry != theMaterialTable->end();
         theMTEntry++) {
      if (*theMTEntry) {
        G4Material *theMaterial = const_cast<G4Material *>(*theMTEntry);
 
        if (theMaterial->GetMaterialPropertiesTable()) {
          theMPT = theMaterial->GetMaterialPropertiesTable();
        } else {
          theMPT = new G4MaterialPropertiesTable;
        }
 
        // properties of the TEC_Wafer
        if (theMaterial->GetName() == "TEC_Wafer") {
          theMPT->AddProperty("FASTCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("SLOWCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndex, nEntries);
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthSi, nEntries);
          theMPT->AddProperty("EFFICIENCY", PhotonEnergy, TECEfficiency, nEntries);
 
          theMPT->AddConstProperty("SCINTILLATIONYIELD", 12000.0 / MeV);
          theMPT->AddConstProperty("RESOLTUIONSCALE", 1.0);
          theMPT->AddConstProperty("FASTTIMECONSTANT", 20.0 * ns);
          theMPT->AddConstProperty("SLOWTIMECONSTANT", 45.0 * ns);
          theMPT->AddConstProperty("YIELDRATIO", 1.0);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of Silicon (used as Module Material in CMSSW)
        else if (theMaterial->GetName() == "Silicon") {
          theMPT->AddProperty("FASTCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("SLOWCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndex, nEntries);
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthSi, nEntries);
          theMPT->AddProperty("EFFICIENCY", PhotonEnergy, TECEfficiency, nEntries);
 
          theMPT->AddConstProperty("SCINTILLATIONYIELD", 12000.0 / MeV);
          theMPT->AddConstProperty("RESOLTUIONSCALE", 1.0);
          theMPT->AddConstProperty("FASTTIMECONSTANT", 20.0 * ns);
          theMPT->AddConstProperty("SLOWTIMECONSTANT", 45.0 * ns);
          theMPT->AddConstProperty("YIELDRATIO", 1.0);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of the TOB_Wafer, TOB_Silicon, TIB_Wafer
        else if ((theMaterial->GetName() == "TOB_Wafer") || (theMaterial->GetName() == "TIB_Wafer")) {
          theMPT->AddProperty("FASTCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("SLOWCOMPONENT", PhotonEnergy, Scintillation, nEntries);
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndex, nEntries);
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthSiBarrel, nEntries);
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          theMPT->AddProperty("EFFICIENCY", PhotonEnergy, BarrelEfficiency, nEntries);
 
          theMPT->AddConstProperty("SCINTILLATIONYIELD", 12000.0 / MeV);
          theMPT->AddConstProperty("RESOLTUIONSCALE", 1.0);
          theMPT->AddConstProperty("FASTTIMECONSTANT", 20.0 * ns);
          theMPT->AddConstProperty("SLOWTIMECONSTANT", 45.0 * ns);
          theMPT->AddConstProperty("YIELDRATIO", 1.0);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of the TIB_ledge_side
        else if (theMaterial->GetName() == "TIB_ledge_side") {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthGeneral, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of air
        else if ((theMaterial->GetName() == "T_Air") || (theMaterial->GetName() == "Air")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthTAir, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of some materials in the Barrel
        // used to absorb photons to avoid hits in other TEC
        else if ((theMaterial->GetName() == "TIB_connector") || (theMaterial->GetName() == "TIB_cylinder") ||
                 (theMaterial->GetName() == "TID_Connector")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthDead, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of SiO2; used for the mirrors of the Alignment Tubes
        else if (theMaterial->GetName() == "Si O_2") {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexMirror, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthMirror, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, Reflectivity, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of Aluminium
        else if ((theMaterial->GetName() == "TOB_Aluminium") || (theMaterial->GetName() == "Aluminium")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthAl, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of TOB_CF_Str
        else if ((theMaterial->GetName() == "TOB_CF_Str")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthTOB_CF_Str, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // some other Tracker materials
        else if ((theMaterial->GetName() == "TID_CF") || (theMaterial->GetName() == "Nomex") ||
                 (theMaterial->GetName() == "TOB_Nomex") || (theMaterial->GetName() == "TID_Nomex") ||
                 (theMaterial->GetName() == "TOB_plate_C") || (theMaterial->GetName() == "TOB_rod") ||
                 (theMaterial->GetName() == "TOB_cool_DS") || (theMaterial->GetName() == "TOB_cool_SS") ||
                 (theMaterial->GetName() == "TID_in_cable") || (theMaterial->GetName() == "TOB_PA_rphi") ||
                 (theMaterial->GetName() == "TOB_frame_ele") || (theMaterial->GetName() == "TOB_PA_ster") ||
                 (theMaterial->GetName() == "TOB_ICB") || (theMaterial->GetName() == "TOB_CONN1") ||
                 (theMaterial->GetName() == "TOB_CONN2") || (theMaterial->GetName() == "TOB_CONN3") ||
                 (theMaterial->GetName() == "TOB_rail") || (theMaterial->GetName() == "TOB_sid_rail1") ||
                 (theMaterial->GetName() == "TOB_sid_rail2")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthTOBCF, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of some TIB materials
        else if ((theMaterial->GetName() == "TIB_CF") || (theMaterial->GetName() == "TIB_cables_ax_out") ||
                 (theMaterial->GetName() == "TIB_outer_supp") || (theMaterial->GetName() == "TIB_PA_rphi") ||
                 (theMaterial->GetName() == "TIB_rail") || (theMaterial->GetName() == "TIB_sid_rail1") ||
                 (theMaterial->GetName() == "TIB_sid_rail2") || (theMaterial->GetName() == "TIB_mod_cool")) {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the reflectivity
          theMPT->AddProperty("REFLECTIVITY", PhotonEnergy, SiReflectivity, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthTIBCF, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
 
        // properties of all other materials in the detector
        else {
          // set the refractive index
          theMPT->AddProperty("RINDEX", PhotonEnergy, RefractiveIndexGeneral, nEntries);
          // set the absorptionlength
          theMPT->AddProperty("ABSLENGTH", PhotonEnergy, AbsorptionLengthGeneral, nEntries);
 
          // set the MaterialPropertiesTable
          theMaterial->SetMaterialPropertiesTable(theMPT);
        }
      }
    }
  }
 
  // loop over the logical volumes and set the material for the sensitive
  // detectors
  const G4LogicalVolumeStore *theLogicalVolumeStore = G4LogicalVolumeStore::GetInstance();
  std::vector<G4LogicalVolume *>::const_iterator theLogicalVolume;
 
  for (theLogicalVolume = theLogicalVolumeStore->begin(); theLogicalVolume != theLogicalVolumeStore->end();
       theLogicalVolume++) {
    if (((*theLogicalVolume)->GetName() == "TECModule0StereoActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule0RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule1StereoActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule1RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule2RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule3RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule4StereoActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule4RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule5RphiActive") ||
        ((*theLogicalVolume)->GetName() == "TECModule6RphiActive")) {
      // set the material
      (*theLogicalVolume)->SetMaterial(theTECWafer);
 
      if (theMPDebugLevel > 2) {
        std::cout << "  AC1CMS: found a logical volume: " << (*theLogicalVolume)->GetName() << std::endl;
        std::cout << "  AC1CMS: the logical volume material = " << (*theLogicalVolume)->GetMaterial()->GetName()
                  << std::endl;
        std::cout << "  AC1CMS: the MaterialPropertiesTable = " << std::endl;
        (*theLogicalVolume)->GetMaterial()->GetMaterialPropertiesTable()->DumpTable();
      }
    } else if (((*theLogicalVolume)->GetName() == "TOBActiveSter0") ||
               ((*theLogicalVolume)->GetName() == "TOBActiveRphi0") ||
               ((*theLogicalVolume)->GetName() == "TOBActiveRphi2") ||
               ((*theLogicalVolume)->GetName() == "TOBActiveRphi4")) {
      // set the material
      (*theLogicalVolume)->SetMaterial(theTOBWafer);
 
      if (theMPDebugLevel > 2) {
        std::cout << "  AC1CMS: found a logical volume: " << (*theLogicalVolume)->GetName() << std::endl;
        std::cout << "  AC1CMS: the logical volume material = " << (*theLogicalVolume)->GetMaterial()->GetName()
                  << std::endl;
        std::cout << "  AC1CMS: the MaterialPropertiesTable = " << std::endl;
        (*theLogicalVolume)->GetMaterial()->GetMaterialPropertiesTable()->DumpTable();
      }
    } else if (((*theLogicalVolume)->GetName() == "TIBActiveSter0") ||
               ((*theLogicalVolume)->GetName() == "TIBActiveRphi0") ||
               ((*theLogicalVolume)->GetName() == "TIBActiveRphi2")) {
      // set the material
      (*theLogicalVolume)->SetMaterial(theTIBWafer);
 
      if (theMPDebugLevel > 2) {
        std::cout << "  AC1CMS: found a logical volume: " << (*theLogicalVolume)->GetName() << std::endl;
        std::cout << "  AC1CMS: the logical volume material = " << (*theLogicalVolume)->GetMaterial()->GetName()
                  << std::endl;
        std::cout << "  AC1CMS: the MaterialPropertiesTable = " << std::endl;
        (*theLogicalVolume)->GetMaterial()->GetMaterialPropertiesTable()->DumpTable();
      }
    }
  }
}