TrapezoidalCartesianMFGrid.cc

Go to the documentation of this file.

 
#include "TrapezoidalCartesianMFGrid.h"
#include "binary_ifstream.h"
#include "LinearGridInterpolator3D.h"
#include "MagneticField/VolumeGeometry/interface/MagExceptions.h"
#include <iostream>
 
//#define DEBUG_GRID
 
using namespace std;
 
TrapezoidalCartesianMFGrid::TrapezoidalCartesianMFGrid(binary_ifstream& inFile, const GloballyPositioned<float>& vol)
    : MFGrid3D(vol), increasingAlongX(false), convertToLocal(true) {
  // The parameters read from the data files are given in global coordinates.
  // In version 85l, local frame has the same orientation of global frame for the reference
  // volume, i.e. the r.f. transformation is only a translation.
  // There is therefore no need to convert the field values to local coordinates.
 
  // Check orientation of local reference frame:
  GlobalVector localXDir(frame().toGlobal(LocalVector(1, 0, 0)));
  GlobalVector localYDir(frame().toGlobal(LocalVector(0, 1, 0)));
 
  if (localXDir.dot(GlobalVector(1, 0, 0)) > 0.999999 && localYDir.dot(GlobalVector(0, 1, 0)) > 0.999999) {
    // "null" rotation - requires no conversion...
    convertToLocal = false;
  } else if (localXDir.dot(GlobalVector(0, 1, 0)) > 0.999999 && localYDir.dot(GlobalVector(1, 0, 0)) > 0.999999) {
    // Typical orientation if master volume is in sector 1
    convertToLocal = true;
  } else {
    convertToLocal = true;
    // Nothing wrong in principle, but this is not expected
    cout << "WARNING: TrapezoidalCartesianMFGrid: unexpected orientation: x: " << localXDir << " y: " << localYDir
         << endl;
  }
 
  int n1, n2, n3;
  inFile >> n1 >> n2 >> n3;
  double xref, yref, zref;
  inFile >> xref >> yref >> zref;
  double step1, step2, step3;
  inFile >> step1 >> step2 >> step3;
 
  double BasicDistance1[3][3];  // linear step
  double BasicDistance2[3][3];  // linear offset
  bool easya, easyb, easyc;
 
  inFile >> BasicDistance1[0][0] >> BasicDistance1[1][0] >> BasicDistance1[2][0];
  inFile >> BasicDistance1[0][1] >> BasicDistance1[1][1] >> BasicDistance1[2][1];
  inFile >> BasicDistance1[0][2] >> BasicDistance1[1][2] >> BasicDistance1[2][2];
  inFile >> BasicDistance2[0][0] >> BasicDistance2[1][0] >> BasicDistance2[2][0];
  inFile >> BasicDistance2[0][1] >> BasicDistance2[1][1] >> BasicDistance2[2][1];
  inFile >> BasicDistance2[0][2] >> BasicDistance2[1][2] >> BasicDistance2[2][2];
  inFile >> easya >> easyb >> easyc;
 
  vector<BVector> fieldValues;
  float Bx, By, Bz;
  int nLines = n1 * n2 * n3;
  fieldValues.reserve(nLines);
  for (int iLine = 0; iLine < nLines; ++iLine) {
    inFile >> Bx >> By >> Bz;
    if (convertToLocal) {
      // Preserve double precision!
      Vector3DBase<double, LocalTag> lB = frame().toLocal(Vector3DBase<double, GlobalTag>(Bx, By, Bz));
      fieldValues.push_back(BVector(lB.x(), lB.y(), lB.z()));
 
    } else {
      fieldValues.push_back(BVector(Bx, By, Bz));
    }
  }
  // check completeness
  string lastEntry;
  inFile >> lastEntry;
  if (lastEntry != "complete") {
    cout << "ERROR during file reading: file is not complete" << endl;
  }
 
  // In version 1103l the reference sector is at phi=0 so that local y is along global X.
  // The increasing grid steps for the same volume are then along Y instead than along X.
  // To use Trapezoid2RectangleMappingX to map the trapezoidal geometry to a rectangular
  // cartesian geometry, we have to exchange (global) X and Y appropriately when constructing
  // it.
  int nx, ny;
  double stepx, stepy, stepz;
  double dstep, offset;
  if (!easya && easyb && easyc) {
    // Increasing grid spacing is on x
    increasingAlongX = true;
    nx = n1;
    ny = n2;
    stepx = step1;
    stepy = step2;
    stepz = step3;
    dstep = BasicDistance1[0][1];
    offset = BasicDistance2[0][1];
  } else if (easya && !easyb && easyc) {
    // Increasing grid spacing is on y
    increasingAlongX = false;
    nx = n2;
    ny = n1;
    stepx = step2;
    stepy = step1;
    stepz = -step3;
    dstep = BasicDistance1[1][0];
    offset = BasicDistance2[1][0];
 
  } else {
    // Increasing spacing on z or on > 1 coordinate not supported
    throw MagGeometryError("TrapezoidalCartesianMFGrid only implemented for first or second coordinate");
  }
 
  double a = stepx * (nx - 1);                 // first base
  double b = a + dstep * (ny - 1) * (nx - 1);  // second base
  double h = stepy * (ny - 1);                 // height
  double delta = -offset * (ny - 1);           // offset between two bases
  double baMinus1 = dstep * (ny - 1) / stepx;  // (b*a) - 1
 
  GlobalPoint grefp(xref, yref, zref);
  LocalPoint lrefp = frame().toLocal(grefp);
 
  if (fabs(baMinus1) > 0.000001) {
    double b_over_a = 1 + baMinus1;
    double a1 = delta / baMinus1;
 
#ifdef DEBUG_GRID
    cout << "Trapeze size (a,b,h) = " << a << "," << b << "," << h << endl;
    cout << "Global origin " << grefp << endl;
    cout << "Local origin  " << lrefp << endl;
    cout << "a1 = " << a1 << endl;
#endif
 
    // FIXME ASSUMPTION: here we assume that the local reference frame is oriented with X along
    // the direction of where the grid is not uniform. This is the case for all current geometries
    double x0 = lrefp.x() + a1;
    double y0 = lrefp.y() + h / 2.;
    mapping_ = Trapezoid2RectangleMappingX(x0, y0, b_over_a, h);
  } else {  // parallelogram
    mapping_ = Trapezoid2RectangleMappingX(0, 0, delta / h);
  }
 
  // transform reference point to grid frame
  double xrec, yrec;
  mapping_.rectangle(lrefp.x(), lrefp.y(), xrec, yrec);
 
  Grid1D gridX(xrec, xrec + (a + b) / 2., nx);
  Grid1D gridY(yrec, yrec + h, ny);
  Grid1D gridZ(lrefp.z(), lrefp.z() + stepz * (n3 - 1), n3);
 
#ifdef DEBUG_GRID
  cout << " GRID X range: local " << gridX.lower() << " - " << gridX.upper()
       << " global: " << (frame().toGlobal(LocalPoint(gridX.lower(), 0, 0))).y() << " - "
       << (frame().toGlobal(LocalPoint(gridX.upper(), 0, 0))).y() << endl;
 
  cout << " GRID Y range: local " << gridY.lower() << " - " << gridY.upper()
       << " global: " << (frame().toGlobal(LocalPoint(0, gridY.lower(), 0))).x() << " - "
       << (frame().toGlobal(LocalPoint(0, gridY.upper(), 0))).x() << endl;
 
  cout << " GRID Z range: local " << gridZ.lower() << " - " << gridZ.upper()
       << " global: " << (frame().toGlobal(LocalPoint(0, 0, gridZ.lower()))).z() << " "
       << (frame().toGlobal(LocalPoint(0, 0, gridZ.upper()))).z() << endl;
#endif
 
  if (increasingAlongX) {
    grid_ = GridType(gridX, gridY, gridZ, fieldValues);
  } else {
    // The reason why gridY and gridX have to be exchanged is because Grid3D::index(i,j,k)
    // assumes a specific order for the fieldValues, and we cannot rearrange this vector.
    // Given that we exchange grids, we will have to exchange the outpouts of mapping_rectangle()
    // and the inputs of mapping_.trapezoid() in the following...
    grid_ = GridType(gridY, gridX, gridZ, fieldValues);
  }
 
#ifdef DEBUG_GRID
  dump();
#endif
}
 
void TrapezoidalCartesianMFGrid::dump() const {
  cout << endl << "Dump of TrapezoidalCartesianMFGrid" << endl;
  //   cout << "Number of points from file   "
  //        << n1 << " " << n2 << " " << n3 << endl;
  cout << "Number of points from Grid1D " << grid_.grida().nodes() << " " << grid_.gridb().nodes() << " "
       << grid_.gridc().nodes() << endl;
 
  //   cout << "Reference Point from file   "
  //        << xref << " " << yref << " " << zref << endl;
  cout << "Reference Point from Grid1D " << grid_.grida().lower() << " " << grid_.gridb().lower() << " "
       << grid_.gridc().lower() << endl;
 
  //   cout << "Basic Distance from file   "
  //        <<  stepx << " " << stepy << " " << stepz << endl;
  cout << "Basic Distance from Grid1D " << grid_.grida().step() << " " << grid_.gridb().step() << " "
       << grid_.gridc().step() << endl;
 
  cout << "Dumping " << grid_.data().size() << " field values " << endl;
  // grid_.dump();
 
  // Dump ALL grid points and values
  // CAVEAT: if convertToLocal = true in the ctor, points have been converted to LOCAL
  // coordinates. To match those from .table files they have to be converted back to global
  //   for (int j=0; j < grid_.gridb().nodes(); j++) {
  //     for (int i=0; i < grid_.grida().nodes(); i++) {
  //       for (int k=0; k < grid_.gridc().nodes(); k++) {
  //    cout << i << " " << j << " " << k << " "
  //         << frame().toGlobal(LocalPoint(nodePosition(i,j,k))) << " "
  //         << nodeValue(i,j,k) << endl;
  //       }
  //     }
  //   }
}
 
MFGrid::LocalVector TrapezoidalCartesianMFGrid::uncheckedValueInTesla(const LocalPoint& p) const {
  double xrec, yrec;
  mapping_.rectangle(p.x(), p.y(), xrec, yrec);
 
  // cout << "TrapezoidalCartesianMFGrid::valueInTesla at local point " << p << endl;
  //   cout << p.x() << " " << p.y()
  //        << " transformed to grid frame: " << xrec << " " << yrec << endl;
 
  LinearGridInterpolator3D interpol(grid_);
 
  if (!increasingAlongX) {
    std::swap(xrec, yrec);
    // B values are already converted to local coord!!! otherwise we should:
    // GridType::ValueType value = interpol.interpolate( xrec, yrec, p.z());
    // return LocalVector(value.y(),value.x(),-value.z());
  }
 
  return LocalVector(interpol.interpolate(xrec, yrec, p.z()));
}
 
void TrapezoidalCartesianMFGrid::toGridFrame(const LocalPoint& p, double& a, double& b, double& c) const {
  if (increasingAlongX) {
    mapping_.rectangle(p.x(), p.y(), a, b);
  } else {
    mapping_.rectangle(p.x(), p.y(), b, a);
  }
 
  c = p.z();
}
 
MFGrid::LocalPoint TrapezoidalCartesianMFGrid::fromGridFrame(double a, double b, double c) const {
  double xtrap, ytrap;
  if (increasingAlongX) {
    mapping_.trapezoid(a, b, xtrap, ytrap);
  } else {
    mapping_.trapezoid(b, a, xtrap, ytrap);
  }
  return LocalPoint(xtrap, ytrap, c);
}