CalorimetryManager.cc

Go to the documentation of this file.

//updated by Reza Goldouzian
//Framework headers
#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
// Fast Simulation headers
#include "FastSimulation/ParticlePropagator/interface/ParticlePropagator.h"
#include "FastSimulation/Calorimetry/interface/CalorimetryManager.h"
#include "FastSimulation/Event/interface/FSimEvent.h"
#include "FastSimulation/Event/interface/FSimTrack.h"
#include "FastSimulation/ShowerDevelopment/interface/EMECALShowerParametrization.h"
#include "FastSimulation/ShowerDevelopment/interface/EMShower.h"
#include "FastSimulation/ShowerDevelopment/interface/HDShowerParametrization.h"
#include "FastSimulation/ShowerDevelopment/interface/HDShower.h"
#include "FastSimulation/ShowerDevelopment/interface/HFShower.h"
#include "FastSimulation/ShowerDevelopment/interface/HDRShower.h"
#include "FastSimulation/ShowerDevelopment/interface/HSParameters.h"
#include "FastSimulation/CaloGeometryTools/interface/CaloGeometryHelper.h"
//#include "FastSimulation/Utilities/interface/Histos.h"
#include "FastSimulation/Utilities/interface/RandomEngineAndDistribution.h"
#include "FastSimulation/Utilities/interface/GammaFunctionGenerator.h"
#include "FastSimulation/Utilities/interface/LandauFluctuationGenerator.h"
#include "DataFormats/HcalDetId/interface/HcalSubdetector.h"
#include "Geometry/CaloGeometry/interface/CaloSubdetectorGeometry.h"
#include "DataFormats/HcalDetId/interface/HcalDetId.h"
#include "DataFormats/EcalDetId/interface/EBDetId.h"
#include "DataFormats/EcalDetId/interface/EEDetId.h"
#include "FastSimulation/Event/interface/FSimTrackEqual.h"
// New headers for Muon Mip Simulation
#include "FastSimulation/MaterialEffects/interface/MaterialEffects.h"
#include "FastSimulation/MaterialEffects/interface/EnergyLossSimulator.h"
// Muon Brem
#include "FastSimulation/MaterialEffects/interface/MuonBremsstrahlungSimulator.h"
 
//Gflash Hadronic Model
#include "SimGeneral/GFlash/interface/GflashHadronShowerProfile.h"
#include "SimGeneral/GFlash/interface/GflashPiKShowerProfile.h"
#include "SimGeneral/GFlash/interface/GflashProtonShowerProfile.h"
#include "SimGeneral/GFlash/interface/GflashAntiProtonShowerProfile.h"
#include "SimGeneral/GFlash/interface/GflashTrajectoryPoint.h"
#include "SimGeneral/GFlash/interface/GflashHit.h"
#include "SimGeneral/GFlash/interface/Gflash3Vector.h"
 
//FastHFShowerLibrary
#include "FastSimulation/ShowerDevelopment/interface/FastHFShowerLibrary.h"
 
// STL headers
#include <memory>
 
#include <iostream>
#include <vector>
 
//CMSSW headers
#include "DataFormats/DetId/interface/DetId.h"
#include "DataFormats/HcalDetId/interface/HcalDetId.h"
//#include "DataFormats/EcalDetId/interface/EcalDetId.h"
#include "Geometry/HcalTowerAlgo/interface/HcalGeometry.h"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/Utilities/interface/EDMException.h"
 
//ROOT headers
#include "TROOT.h"
#include "TH1.h"
 
using namespace edm;
 
typedef math::XYZVector XYZVector;
typedef math::XYZVector XYZPoint;
 
std::vector<std::pair<int, float> > CalorimetryManager::myZero_ =
    std::vector<std::pair<int, float> >(1, std::pair<int, float>(0, 0.));
 
CalorimetryManager::CalorimetryManager() : myCalorimeter_(nullptr), initialized_(false) { ; }
 
CalorimetryManager::CalorimetryManager(FSimEvent* aSimEvent,
                                       const edm::ParameterSet& fastCalo,
                                       const edm::ParameterSet& fastMuECAL,
                                       const edm::ParameterSet& fastMuHCAL,
                                       const edm::ParameterSet& parGflash)
    : mySimEvent(aSimEvent),
      initialized_(false),
      theMuonEcalEffects(nullptr),
      theMuonHcalEffects(nullptr),
      bFixedLength_(false) {
  aLandauGenerator = new LandauFluctuationGenerator;
  aGammaGenerator = new GammaFunctionGenerator;
 
  //Gflash
  theProfile = new GflashHadronShowerProfile(parGflash);
  thePiKProfile = new GflashPiKShowerProfile(parGflash);
  theProtonProfile = new GflashProtonShowerProfile(parGflash);
  theAntiProtonProfile = new GflashAntiProtonShowerProfile(parGflash);
 
  // FastHFShowerLibrary
  theHFShowerLibrary = new FastHFShowerLibrary(fastCalo);
 
  readParameters(fastCalo);
 
  myCalorimeter_ = new CaloGeometryHelper(fastCalo);
  myHDResponse_ = new HCALResponse(fastCalo.getParameter<edm::ParameterSet>("HCALResponse"));
  myHSParameters_ = new HSParameters(fastCalo.getParameter<edm::ParameterSet>("HSParameters"));
 
  // Material Effects for Muons in ECAL (only EnergyLoss implemented so far)
  if (fastMuECAL.getParameter<bool>("PairProduction") || fastMuECAL.getParameter<bool>("Bremsstrahlung") ||
      fastMuECAL.getParameter<bool>("MuonBremsstrahlung") || fastMuECAL.getParameter<bool>("EnergyLoss") ||
      fastMuECAL.getParameter<bool>("MultipleScattering"))
    theMuonEcalEffects = new MaterialEffects(fastMuECAL);
 
  // Material Effects for Muons in HCAL (only EnergyLoss implemented so far)
  if (fastMuHCAL.getParameter<bool>("PairProduction") || fastMuHCAL.getParameter<bool>("Bremsstrahlung") ||
      fastMuHCAL.getParameter<bool>("MuonBremsstrahlung") || fastMuHCAL.getParameter<bool>("EnergyLoss") ||
      fastMuHCAL.getParameter<bool>("MultipleScattering"))
    theMuonHcalEffects = new MaterialEffects(fastMuHCAL);
 
  if (fastCalo.exists("ECALResponseScaling")) {
    ecalCorrection =
        std::make_unique<KKCorrectionFactors>(fastCalo.getParameter<edm::ParameterSet>("ECALResponseScaling"));
  }
}
 
void CalorimetryManager::clean() {
  EBMapping_.clear();
  EEMapping_.clear();
  HMapping_.clear();
  ESMapping_.clear();
  muonSimTracks.clear();
  savedMuonSimTracks.clear();
}
 
CalorimetryManager::~CalorimetryManager() {
  if (myCalorimeter_)
    delete myCalorimeter_;
  if (myHDResponse_)
    delete myHDResponse_;
 
  if (theMuonEcalEffects)
    delete theMuonEcalEffects;
  if (theMuonHcalEffects)
    delete theMuonHcalEffects;
 
  if (theProfile)
    delete theProfile;
 
  if (theHFShowerLibrary)
    delete theHFShowerLibrary;
}
 
void CalorimetryManager::reconstruct(RandomEngineAndDistribution const* random) {
  if (!evtsToDebug_.empty()) {
    std::vector<unsigned int>::const_iterator itcheck =
        find(evtsToDebug_.begin(), evtsToDebug_.end(), mySimEvent->id().event());
    debug_ = (itcheck != evtsToDebug_.end());
    if (debug_)
      mySimEvent->print();
  }
 
  initialize(random);
 
  LogInfo("FastCalorimetry") << "Reconstructing " << (int)mySimEvent->nTracks() << " tracks." << std::endl;
  for (int fsimi = 0; fsimi < (int)mySimEvent->nTracks(); ++fsimi) {
    FSimTrack& myTrack = mySimEvent->track(fsimi);
 
    reconstructTrack(myTrack, random);
  }  // particle loop
 
}  // reconstruct
 
void CalorimetryManager::initialize(RandomEngineAndDistribution const* random) {
  // Clear the content of the calorimeters
  if (!initialized_) {
    theHFShowerLibrary->SetRandom(random);
 
    // Check if the preshower is really available
    if (simulatePreshower_ && !myCalorimeter_->preshowerPresent()) {
      edm::LogWarning("CalorimetryManager")
          << " WARNING: The preshower simulation has been turned on; but no preshower geometry is available "
          << std::endl;
      edm::LogWarning("CalorimetryManager") << " Disabling the preshower simulation " << std::endl;
      simulatePreshower_ = false;
    }
 
    initialized_ = true;
  }
  clean();
}
 
void CalorimetryManager::reconstructTrack(FSimTrack& myTrack, RandomEngineAndDistribution const* random) {
  int pid = abs(myTrack.type());
 
  if (debug_) {
    LogInfo("FastCalorimetry") << " ===> pid = " << pid << std::endl;
  }
 
  // Check that the particle hasn't decayed
  if (myTrack.noEndVertex()) {
    // Simulate energy smearing for photon and electrons
    float charge_ = (float)(myTrack.charge());
    if (pid == 11 || pid == 22) {
      if (myTrack.onEcal())
        EMShowerSimulation(myTrack, random);
      else if (myTrack.onVFcal()) {
        if (useShowerLibrary) {
          theHFShowerLibrary->recoHFShowerLibrary(myTrack);
          myHDResponse_->correctHF(myTrack.hcalEntrance().e(), abs(myTrack.type()));
          updateHCAL(theHFShowerLibrary->getHitsMap(), myTrack.id());
        } else
          reconstructHCAL(myTrack, random);
      }
    }  // electron or photon
    else if (pid == 13 || pid == 1000024 || (pid > 1000100 && pid < 1999999 && fabs(charge_) > 0.001)) {
      MuonMipSimulation(myTrack, random);
    }
    // Simulate energy smearing for hadrons (i.e., everything
    // but muons... and SUSY particles that deserve a special
    // treatment.
    else if (pid < 1000000) {
      if (myTrack.onHcal() || myTrack.onVFcal()) {
        if (optionHDSim_ == 0)
          reconstructHCAL(myTrack, random);
        else
          HDShowerSimulation(myTrack, random);
      }
    }  // pid < 1000000
  }    // myTrack.noEndVertex()
}
 
// Simulation of electromagnetic showers in PS, ECAL, HCAL
void CalorimetryManager::EMShowerSimulation(const FSimTrack& myTrack, RandomEngineAndDistribution const* random) {
  std::vector<const RawParticle*> thePart;
  double X0depth;
 
  if (debug_) {
    LogInfo("FastCalorimetry") << " EMShowerSimulation " << myTrack << std::endl;
  }
 
  // The Particle at ECAL entrance
  myPart = myTrack.ecalEntrance();
 
  // protection against infinite loop.
  if (myTrack.type() == 22 && myPart.e() < 0.055)
    return;
 
  // Barrel or Endcap ?
  int onEcal = myTrack.onEcal();
  int onHcal = myTrack.onHcal();
  int onLayer1 = myTrack.onLayer1();
  int onLayer2 = myTrack.onLayer2();
 
  // The entrance in ECAL
  XYZPoint ecalentrance = myPart.vertex().Vect();
 
  // The preshower
  PreshowerHitMaker* myPreshower = nullptr;
  if (simulatePreshower_ && (onLayer1 || onLayer2)) {
    XYZPoint layer1entrance, layer2entrance;
    XYZVector dir1, dir2;
    if (onLayer1) {
      layer1entrance = XYZPoint(myTrack.layer1Entrance().vertex().Vect());
      dir1 = XYZVector(myTrack.layer1Entrance().Vect().Unit());
    }
    if (onLayer2) {
      layer2entrance = XYZPoint(myTrack.layer2Entrance().vertex().Vect());
      dir2 = XYZVector(myTrack.layer2Entrance().Vect().Unit());
    }
    myPreshower =
        new PreshowerHitMaker(myCalorimeter_, layer1entrance, dir1, layer2entrance, dir2, aLandauGenerator, random);
    myPreshower->setMipEnergy(mipValues_[0], mipValues_[1]);
  }
 
  // The ECAL Properties
  EMECALShowerParametrization showerparam(myCalorimeter_->ecalProperties(onEcal),
                                          myCalorimeter_->hcalProperties(onHcal),
                                          myCalorimeter_->layer1Properties(onLayer1),
                                          myCalorimeter_->layer2Properties(onLayer2),
                                          theCoreIntervals_,
                                          theTailIntervals_,
                                          RCFactor_,
                                          RTFactor_);
 
  // Photons : create an e+e- pair
  if (myTrack.type() == 22) {
    // Depth for the first e+e- pair creation (in X0)
    X0depth = -log(random->flatShoot()) * (9. / 7.);
 
    // Initialization
    double eMass = 0.000510998902;
    double xe = 0;
    double xm = eMass / myPart.e();
    double weight = 0.;
 
    // Generate electron energy between emass and eGamma-emass
    do {
      xe = random->flatShoot() * (1. - 2. * xm) + xm;
      weight = 1. - 4. / 3. * xe * (1. - xe);
    } while (weight < random->flatShoot());
 
    // Protection agains infinite loop in Famos Shower
    if (myPart.e() * xe < 0.055 || myPart.e() * (1. - xe) < 0.055) {
      if (myPart.e() > 0.055)
        thePart.push_back(&myPart);
 
    } else {
      myElec = (myPart.momentum()) * xe;
      myPosi = (myPart.momentum()) * (1. - xe);
      myElec.setVertex(myPart.vertex());
      myPosi.setVertex(myPart.vertex());
      thePart.push_back(&myElec);
      thePart.push_back(&myPosi);
    }
    // Electrons
  } else {
    X0depth = 0.;
    if (myPart.e() > 0.055)
      thePart.push_back(&myPart);
  }
 
  // After the different protections, this shouldn't happen.
  if (thePart.empty()) {
    if (myPreshower == nullptr)
      return;
    delete myPreshower;
    return;
  }
 
  // find the most energetic particle
  double maxEnergy = -1.;
  for (unsigned ip = 0; ip < thePart.size(); ++ip)
    if (thePart[ip]->e() > maxEnergy)
      maxEnergy = thePart[ip]->e();
 
  // Initialize the Grid in ECAL
  int size = gridSize_;
  if (maxEnergy > 100)
    size = 11;
 
  EMShower theShower(random, aGammaGenerator, &showerparam, &thePart, nullptr, nullptr, bFixedLength_);
 
  double maxShower = theShower.getMaximumOfShower();
  if (maxShower > 20.)
    maxShower = 2.;  // simple pivot-searching protection
 
  double depth((X0depth + maxShower) * myCalorimeter_->ecalProperties(onEcal)->radLenIncm());
  XYZPoint meanShower = ecalentrance + myPart.Vect().Unit() * depth;
 
  // The closest crystal
  DetId pivot(myCalorimeter_->getClosestCell(meanShower, true, onEcal == 1));
 
  if (pivot.subdetId() == 0) {  // further protection against avbsence of pivot
    edm::LogWarning("CalorimetryManager")
        << "Pivot for egamma  e = " << myTrack.hcalEntrance().e() << " is not found at depth " << depth
        << " and meanShower coordinates = " << meanShower << std::endl;
    if (myPreshower)
      delete myPreshower;
    return;
  }
 
  EcalHitMaker myGrid(myCalorimeter_, ecalentrance, pivot, onEcal, size, 0, random);
  //                                             ^^^^
  //                                         for EM showers
  myGrid.setPulledPadSurvivalProbability(pulledPadSurvivalProbability_);
  myGrid.setCrackPadSurvivalProbability(crackPadSurvivalProbability_);
 
  //maximumdepth dependence of the radiusfactorbehindpreshower
  //First tuning: Shilpi Jain (Mar-Apr 2010); changed after tuning - Feb-July - Shilpi Jain
  /* **************
     myGrid.setRadiusFactor(radiusFactor_);
     if(onLayer1 || onLayer2)
     {
     float b               = radiusPreshowerCorrections_[0];
     float a               = radiusFactor_*( 1.+radiusPreshowerCorrections_[1]*radiusPreshowerCorrections_[0] );
     float maxdepth        = X0depth+theShower.getMaximumOfShower();
     float newRadiusFactor = radiusFactor_;
     if(myPart.e()<=250.)
     {
     newRadiusFactor = a/(1.+b*maxdepth); 
     }
     myGrid.setRadiusFactor(newRadiusFactor);
     }
     else // otherwise use the normal radius factor
     {
     myGrid.setRadiusFactor(radiusFactor_);
     }
     ************** */
  if (myTrack.onEcal() == 2)  // if on EE
  {
    if ((onLayer1 || onLayer2) && myPart.e() <= 250.) {
      double maxdepth = X0depth + theShower.getMaximumOfShower();
      double newRadiusFactor = radiusFactorEE_ * aTerm / (1. + bTerm * maxdepth);
      myGrid.setRadiusFactor(newRadiusFactor);
    } else  // otherwise use the normal radius factor
    {
      myGrid.setRadiusFactor(radiusFactorEE_);
    }
  }     //if(myTrack.onEcal() == 2)
  else  // else if on EB
  {
    myGrid.setRadiusFactor(radiusFactorEB_);
  }
  //(end of) changed after tuning - Feb-July - Shilpi Jain
 
  myGrid.setPreshowerPresent(simulatePreshower_);
 
  // The shower simulation
  myGrid.setTrackParameters(myPart.Vect().Unit(), X0depth, myTrack);
 
  if (myPreshower)
    theShower.setPreshower(myPreshower);
 
  HcalHitMaker myHcalHitMaker(myGrid, (unsigned)0);
 
  theShower.setGrid(&myGrid);
  theShower.setHcal(&myHcalHitMaker);
  theShower.compute();
 
  // calculate the total simulated energy for this particle
  float simE = 0;
  for (const auto& mapIterator : myGrid.getHits()) {
    simE += mapIterator.second;
  }
 
  auto scale = ecalCorrection
                   ? ecalCorrection->getScale(myTrack.ecalEntrance().e(), std::abs(myTrack.ecalEntrance().eta()), simE)
                   : 1.;
 
  // Save the hits !
  updateECAL(myGrid.getHits(), onEcal, myTrack.id(), scale);
 
  // Now fill the HCAL hits
  updateHCAL(myHcalHitMaker.getHits(), myTrack.id());
 
  // delete the preshower
  if (myPreshower != nullptr) {
    updatePreshower(myPreshower->getHits(), myTrack.id());
    delete myPreshower;
  }
}
 
void CalorimetryManager::reconstructHCAL(const FSimTrack& myTrack, RandomEngineAndDistribution const* random) {
  int hit;
  int pid = abs(myTrack.type());
  if (debug_) {
    LogInfo("FastCalorimetry") << " reconstructHCAL " << myTrack << std::endl;
  }
 
  XYZTLorentzVector trackPosition;
  if (myTrack.onHcal()) {
    trackPosition = myTrack.hcalEntrance().vertex();
    hit = myTrack.onHcal() - 1;
  } else {
    trackPosition = myTrack.vfcalEntrance().vertex();
    hit = 2;
  }
 
  double pathEta = trackPosition.eta();
  double pathPhi = trackPosition.phi();
 
  double EGen = myTrack.hcalEntrance().e();
  double emeas = 0.;
 
  float charge_ = (float)myTrack.charge();
  if (pid == 13 || pid == 1000024 || (pid > 1000100 && pid < 1999999 && fabs(charge_) > 0.001)) {
    emeas = myHDResponse_->responseHCAL(0, EGen, pathEta, 2, random);  // 2=muon
    if (debug_)
      LogInfo("FastCalorimetry") << "CalorimetryManager::reconstructHCAL - MUON !!!" << std::endl;
  } else if (pid == 22 || pid == 11) {
    emeas = myHDResponse_->responseHCAL(0, EGen, pathEta, 0, random);  // last par. = 0 = e/gamma
    if (debug_)
      LogInfo("FastCalorimetry") << "CalorimetryManager::reconstructHCAL - e/gamma !!!" << std::endl;
  } else {
    emeas = myHDResponse_->getHCALEnergyResponse(EGen, hit, random);
  }
 
  if (debug_)
    LogInfo("FastCalorimetry") << "CalorimetryManager::reconstructHCAL - on-calo "
                               << "  eta = " << pathEta << "  phi = " << pathPhi << "  Egen = " << EGen
                               << "  Emeas = " << emeas << std::endl;
 
  if (emeas > 0.) {
    DetId cell = myCalorimeter_->getClosestCell(trackPosition.Vect(), false, false);
    double tof =
        (((HcalGeometry*)(myCalorimeter_->getHcalGeometry()))->getPosition(cell).mag()) / 29.98;  //speed of light
    CaloHitID current_id(cell.rawId(), tof, myTrack.id());
    std::map<CaloHitID, float> hitMap;
    hitMap[current_id] = emeas;
    updateHCAL(hitMap, myTrack.id());
  }
}
 
void CalorimetryManager::HDShowerSimulation(const FSimTrack& myTrack, RandomEngineAndDistribution const* random) {  //,
  // const edm::ParameterSet& fastCalo){
 
  theHFShowerLibrary->SetRandom(random);
 
  //  TimeMe t(" FASTEnergyReconstructor::HDShower");
  const XYZTLorentzVector& moment = myTrack.momentum();
 
  if (debug_)
    LogInfo("FastCalorimetry") << "CalorimetryManager::HDShowerSimulation - track param." << std::endl
                               << "  eta = " << moment.eta() << std::endl
                               << "  phi = " << moment.phi() << std::endl
                               << "   et = " << moment.Et() << std::endl
                               << "   e  = " << myTrack.hcalEntrance().e() << std::endl;
 
  if (debug_) {
    LogInfo("FastCalorimetry") << " HDShowerSimulation " << myTrack << std::endl;
  }
 
  int hit;
 
  XYZTLorentzVector trackPosition;
  if (myTrack.onEcal()) {
    trackPosition = myTrack.ecalEntrance().vertex();
    hit = myTrack.onEcal() - 1;  //
    myPart = myTrack.ecalEntrance();
  } else if (myTrack.onVFcal()) {
    trackPosition = myTrack.vfcalEntrance().vertex();
    hit = 2;
    myPart = myTrack.vfcalEntrance();
  } else {
    LogInfo("FastCalorimetry") << " The particle is not in the acceptance " << std::endl;
    return;
  }
 
  // int onHCAL = hit + 1; - specially for myCalorimeter->hcalProperties(onHCAL)
  // (below) to get VFcal properties ...
  int onHCAL = hit + 1;
  int onECAL = myTrack.onEcal();
 
  double pathEta = trackPosition.eta();
  double pathPhi = trackPosition.phi();
 
  double eint = moment.e();
  double eGen = myTrack.hcalEntrance().e();
 
  double emeas = 0.;
  double pmip = myHDResponse_->getMIPfraction(eGen, pathEta);
 
  //===========================================================================
  if (eGen > 0.) {
    // ECAL and HCAL properties to get
    HDShowerParametrization theHDShowerparam(
        myCalorimeter_->ecalProperties(onECAL), myCalorimeter_->hcalProperties(onHCAL), myHSParameters_);
 
    //Making ECAL Grid (and segments calculation)
    XYZPoint caloentrance;
    XYZVector direction;
    if (myTrack.onEcal()) {
      caloentrance = myTrack.ecalEntrance().vertex().Vect();
      direction = myTrack.ecalEntrance().Vect().Unit();
    } else if (myTrack.onHcal()) {
      caloentrance = myTrack.hcalEntrance().vertex().Vect();
      direction = myTrack.hcalEntrance().Vect().Unit();
    } else {
      caloentrance = myTrack.vfcalEntrance().vertex().Vect();
      direction = myTrack.vfcalEntrance().Vect().Unit();
    }
 
    if (debug_)
      LogInfo("FastCalorimetry") << "CalorimetryManager::HDShowerSimulation - on-calo 1 " << std::endl
                                 << "  onEcal    = " << myTrack.onEcal() << std::endl
                                 << "  onHcal    = " << myTrack.onHcal() << std::endl
                                 << "  onVFcal   = " << myTrack.onVFcal() << std::endl
                                 << "  position  = " << caloentrance << std::endl;
 
    DetId pivot;
    if (myTrack.onEcal()) {
      pivot = myCalorimeter_->getClosestCell(caloentrance, true, myTrack.onEcal() == 1);
    } else if (myTrack.onHcal()) {
      pivot = myCalorimeter_->getClosestCell(caloentrance, false, false);
    }
 
    EcalHitMaker myGrid(
        myCalorimeter_, caloentrance, pivot, pivot.null() ? 0 : myTrack.onEcal(), hdGridSize_, 1, random);
    // 1=HAD shower
 
    myGrid.setTrackParameters(direction, 0, myTrack);
    // Build the FAMOS HCAL
    HcalHitMaker myHcalHitMaker(myGrid, (unsigned)1);
 
    // Shower simulation
    bool status = false;
    int mip = 2;
    // Use HFShower for HF
    if (!myTrack.onEcal() && !myTrack.onHcal()) {
      // Warning : We give here the particle energy with the response
      //           but without the resolution/gaussian smearing
      //           For HF, the resolution is due to the PE statistic
 
      if (useShowerLibrary) {
        theHFShowerLibrary->recoHFShowerLibrary(myTrack);
        status = true;
      } else {
        HFShower theShower(random, &theHDShowerparam, &myGrid, &myHcalHitMaker, onECAL, eGen);
        //           eGen);
        //           e); // PV Warning : temporarly set the energy to the generated E
 
        status = theShower.compute();
      }
    } else {
      if (hdSimMethod_ == 0) {
        HDShower theShower(random, &theHDShowerparam, &myGrid, &myHcalHitMaker, onECAL, eGen, pmip);
        status = theShower.compute();
        mip = theShower.getmip();
      } else if (hdSimMethod_ == 1) {
        HDRShower theShower(random, &theHDShowerparam, &myGrid, &myHcalHitMaker, onECAL, eGen);
        status = theShower.computeShower();
        mip = 2;
      } else if (hdSimMethod_ == 2) {
        //dynamically loading a corresponding profile by the particle type
        int particleType = myTrack.type();
        theProfile = thePiKProfile;
        if (particleType == -2212)
          theProfile = theAntiProtonProfile;
        else if (particleType == 2212)
          theProfile = theProtonProfile;
 
        //input variables for GflashHadronShowerProfile
        int showerType = 99 + myTrack.onEcal();
        double globalTime = 150.0;  // a temporary reference hit time in nanosecond
        float charge = (float)(myTrack.charge());
        Gflash3Vector gfpos(trackPosition.X(), trackPosition.Y(), trackPosition.Z());
        Gflash3Vector gfmom(moment.X(), moment.Y(), moment.Z());
 
        theProfile->initialize(showerType, eGen, globalTime, charge, gfpos, gfmom);
        theProfile->loadParameters();
        theProfile->hadronicParameterization();
 
        //make hits
        std::vector<GflashHit>& gflashHitList = theProfile->getGflashHitList();
        std::vector<GflashHit>::const_iterator spotIter = gflashHitList.begin();
        std::vector<GflashHit>::const_iterator spotIterEnd = gflashHitList.end();
 
        Gflash::CalorimeterNumber whichCalor = Gflash::kNULL;
 
        for (; spotIter != spotIterEnd; spotIter++) {
          double pathLength = theProfile->getGflashShowino()->getPathLengthAtShower() +
                              (30 * 100 / eGen) * (spotIter->getTime() - globalTime);
 
          double currentDepth = std::max(0.0, pathLength - theProfile->getGflashShowino()->getPathLengthOnEcal());
 
          //find the the showino position at the currentDepth
          GflashTrajectoryPoint trajectoryPoint;
          theProfile->getGflashShowino()->getHelix()->getGflashTrajectoryPoint(trajectoryPoint, pathLength);
          Gflash3Vector positionAtCurrentDepth = trajectoryPoint.getPosition();
          //find radial distrance
          Gflash3Vector lateralDisplacement = positionAtCurrentDepth - spotIter->getPosition() / CLHEP::cm;
          double rShower = lateralDisplacement.r();
          double azimuthalAngle = lateralDisplacement.phi();
 
          whichCalor = Gflash::getCalorimeterNumber(positionAtCurrentDepth);
 
          if (whichCalor == Gflash::kESPM || whichCalor == Gflash::kENCA) {
            bool statusPad = myGrid.getPads(currentDepth, true);
            if (!statusPad)
              continue;
            myGrid.setSpotEnergy(1.2 * spotIter->getEnergy() / CLHEP::GeV);
            myGrid.addHit(rShower / Gflash::intLength[Gflash::kESPM], azimuthalAngle, 0);
          } else if (whichCalor == Gflash::kHB || whichCalor == Gflash::kHE) {
            bool setHDdepth = myHcalHitMaker.setDepth(currentDepth, true);
            if (!setHDdepth)
              continue;
            myHcalHitMaker.setSpotEnergy(1.4 * spotIter->getEnergy() / CLHEP::GeV);
            myHcalHitMaker.addHit(rShower / Gflash::intLength[Gflash::kHB], azimuthalAngle, 0);
          }
        }
        status = true;
      } else {
        edm::LogInfo("FastSimulationCalorimetry") << " SimMethod " << hdSimMethod_ << " is NOT available ";
      }
    }
 
    if (status) {
      // Here to switch between simple formulae and parameterized response
      if (optionHDSim_ == 1) {
        emeas = myHDResponse_->getHCALEnergyResponse(eGen, hit, random);
      } else {                                                               // optionHDsim == 2
        emeas = myHDResponse_->responseHCAL(mip, eGen, pathEta, 1, random);  // 1=hadron
      }
 
      double correction = emeas / eGen;
 
      // RespCorrP factors (ECAL and HCAL separately) calculation
      respCorr(eint);
 
      if (debug_)
        LogInfo("FastCalorimetry") << "CalorimetryManager::HDShowerSimulation - on-calo 2" << std::endl
                                   << "   eta  = " << pathEta << std::endl
                                   << "   phi  = " << pathPhi << std::endl
                                   << "  Egen  = " << eGen << std::endl
                                   << " Emeas  = " << emeas << std::endl
                                   << "  corr  = " << correction << std::endl
                                   << "   mip  = " << mip << std::endl;
 
      if (myTrack.onEcal() > 0) {
        // Save ECAL hits
        updateECAL(myGrid.getHits(), onECAL, myTrack.id(), correction * ecorr);
      }
 
      // Save HCAL hits
      if (myTrack.onVFcal() && useShowerLibrary) {
        myHDResponse_->correctHF(eGen, abs(myTrack.type()));
        updateHCAL(theHFShowerLibrary->getHitsMap(), myTrack.id());
      } else
        updateHCAL(myHcalHitMaker.getHits(), myTrack.id(), correction * hcorr);
 
    } else {  // shower simulation failed
      if (myTrack.onHcal() || myTrack.onVFcal()) {
        DetId cell = myCalorimeter_->getClosestCell(trackPosition.Vect(), false, false);
        double tof =
            (((HcalGeometry*)(myCalorimeter_->getHcalGeometry()))->getPosition(cell).mag()) / 29.98;  //speed of light
        CaloHitID current_id(cell.rawId(), tof, myTrack.id());
        std::map<CaloHitID, float> hitMap;
        hitMap[current_id] = emeas;
        updateHCAL(hitMap, myTrack.id());
        if (debug_)
          LogInfo("FastCalorimetry") << " HCAL simple cell " << cell.rawId() << " added    E = " << emeas << std::endl;
      }
    }
 
  }  // e > 0. ...
 
  if (debug_)
    LogInfo("FastCalorimetry") << std::endl << " FASTEnergyReconstructor::HDShowerSimulation  finished " << std::endl;
}
 
void CalorimetryManager::MuonMipSimulation(const FSimTrack& myTrack, RandomEngineAndDistribution const* random) {
  //  TimeMe t(" FASTEnergyReconstructor::HDShower");
  XYZTLorentzVector moment = myTrack.momentum();
 
  // Backward compatibility behaviour
  if (!theMuonHcalEffects) {
    savedMuonSimTracks.push_back(myTrack);
 
    if (myTrack.onHcal() || myTrack.onVFcal())
      reconstructHCAL(myTrack, random);
 
    return;
  }
 
  if (debug_)
    LogInfo("FastCalorimetry") << "CalorimetryManager::MuonMipSimulation - track param." << std::endl
                               << "  eta = " << moment.eta() << std::endl
                               << "  phi = " << moment.phi() << std::endl
                               << "   et = " << moment.Et() << std::endl;
 
  XYZTLorentzVector trackPosition;
  if (myTrack.onEcal()) {
    trackPosition = myTrack.ecalEntrance().vertex();
    myPart = myTrack.ecalEntrance();
  } else if (myTrack.onVFcal()) {
    trackPosition = myTrack.vfcalEntrance().vertex();
    myPart = myTrack.vfcalEntrance();
  } else {
    LogInfo("FastCalorimetry") << " The particle is not in the acceptance " << std::endl;
    return;
  }
 
  // int onHCAL = hit + 1; - specially for myCalorimeter->hcalProperties(onHCAL)
  // (below) to get VFcal properties ...
  // not needed ?
  //  int onHCAL = hit + 1;
  int onECAL = myTrack.onEcal();
 
  //===========================================================================
 
  // ECAL and HCAL properties to get
 
  //Making ECAL Grid (and segments calculation)
  XYZPoint caloentrance;
  XYZVector direction;
  if (myTrack.onEcal()) {
    caloentrance = myTrack.ecalEntrance().vertex().Vect();
    direction = myTrack.ecalEntrance().Vect().Unit();
  } else if (myTrack.onHcal()) {
    caloentrance = myTrack.hcalEntrance().vertex().Vect();
    direction = myTrack.hcalEntrance().Vect().Unit();
  } else {
    caloentrance = myTrack.vfcalEntrance().vertex().Vect();
    direction = myTrack.vfcalEntrance().Vect().Unit();
  }
 
  DetId pivot;
  if (myTrack.onEcal()) {
    pivot = myCalorimeter_->getClosestCell(caloentrance, true, myTrack.onEcal() == 1);
  } else if (myTrack.onHcal()) {
    pivot = myCalorimeter_->getClosestCell(caloentrance, false, false);
  }
 
  EcalHitMaker myGrid(myCalorimeter_, caloentrance, pivot, pivot.null() ? 0 : myTrack.onEcal(), hdGridSize_, 0, random);
  // 0 =EM shower -> Unit = X0
 
  myGrid.setTrackParameters(direction, 0, myTrack);
 
  // Now get the path in the Preshower, ECAL and HCAL along a straight line extrapolation
  // but only those in the ECAL are used
 
  const std::vector<CaloSegment>& segments = myGrid.getSegments();
  unsigned nsegments = segments.size();
 
  int ifirstHcal = -1;
  int ilastEcal = -1;
 
  EnergyLossSimulator* energyLossECAL = (theMuonEcalEffects) ? theMuonEcalEffects->energyLossSimulator() : nullptr;
  //  // Muon brem in ECAL
  //  MuonBremsstrahlungSimulator* muonBremECAL = 0;
  //  if (theMuonEcalEffects) muonBremECAL = theMuonEcalEffects->muonBremsstrahlungSimulator();
 
  for (unsigned iseg = 0; iseg < nsegments && ifirstHcal < 0; ++iseg) {
    // in the ECAL, there are two types of segments: PbWO4 and GAP
    float segmentSizeinX0 = segments[iseg].X0length();
 
    // Martijn - insert your computations here
    float energy = 0.0;
    if (segmentSizeinX0 > 0.001 && segments[iseg].material() == CaloSegment::PbWO4) {
      // The energy loss simulator
      float charge = (float)(myTrack.charge());
      RawParticle p = rawparticle::makeMuon(charge < 0, moment, trackPosition);
      ParticlePropagator theMuon(p, nullptr, nullptr, mySimEvent->theTable());
      if (energyLossECAL) {
        energyLossECAL->updateState(theMuon, segmentSizeinX0, random);
        energy = energyLossECAL->deltaMom().E();
        moment -= energyLossECAL->deltaMom();
      }
    }
    // that's all for ECAL, Florian
    // Save the hit only if it is a crystal
    if (segments[iseg].material() == CaloSegment::PbWO4) {
      myGrid.getPads(segments[iseg].sX0Entrance() + segmentSizeinX0 * 0.5);
      myGrid.setSpotEnergy(energy);
      myGrid.addHit(0., 0.);
      ilastEcal = iseg;
    }
    // Check for end of loop:
    if (segments[iseg].material() == CaloSegment::HCAL) {
      ifirstHcal = iseg;
    }
  }
 
  // Build the FAMOS HCAL
  HcalHitMaker myHcalHitMaker(myGrid, (unsigned)2);
  // float mipenergy=0.1;
  // Create the helix with the stepping helix propagator
  // to add a hit, just do
  // myHcalHitMaker.setSpotEnergy(mipenergy);
  // math::XYZVector hcalEntrance;
  // if(ifirstHcal>=0) hcalEntrance=segments[ifirstHcal].entrance();
  // myHcalHitMaker.addHit(hcalEntrance);
  int ilastHcal = -1;
  float mipenergy = 0.0;
 
  EnergyLossSimulator* energyLossHCAL = (theMuonHcalEffects) ? theMuonHcalEffects->energyLossSimulator() : nullptr;
  //  // Muon Brem effect
  //  MuonBremsstrahlungSimulator* muonBremHCAL = 0;
  //  if (theMuonHcalEffects) muonBremHCAL = theMuonHcalEffects->muonBremsstrahlungSimulator();
 
  if (ifirstHcal > 0 && energyLossHCAL) {
    for (unsigned iseg = ifirstHcal; iseg < nsegments; ++iseg) {
      float segmentSizeinX0 = segments[iseg].X0length();
      if (segments[iseg].material() == CaloSegment::HCAL) {
        ilastHcal = iseg;
        if (segmentSizeinX0 > 0.001) {
          // The energy loss simulator
          float charge = (float)(myTrack.charge());
          RawParticle p = rawparticle::makeMuon(charge < 0, moment, trackPosition);
          ParticlePropagator theMuon(p, nullptr, nullptr, mySimEvent->theTable());
          energyLossHCAL->updateState(theMuon, segmentSizeinX0, random);
          mipenergy = energyLossHCAL->deltaMom().E();
          moment -= energyLossHCAL->deltaMom();
          myHcalHitMaker.setSpotEnergy(mipenergy);
          myHcalHitMaker.addHit(segments[iseg].entrance());
        }
      }
    }
  }
 
  // Copy the muon SimTrack (Only for Energy loss)
  FSimTrack muonTrack(myTrack);
  if (energyLossHCAL && ilastHcal >= 0) {
    math::XYZVector hcalExit = segments[ilastHcal].exit();
    muonTrack.setTkPosition(hcalExit);
    muonTrack.setTkMomentum(moment);
  } else if (energyLossECAL && ilastEcal >= 0) {
    math::XYZVector ecalExit = segments[ilastEcal].exit();
    muonTrack.setTkPosition(ecalExit);
    muonTrack.setTkMomentum(moment);
  }  // else just leave tracker surface position and momentum...
 
  muonSimTracks.push_back(muonTrack);
 
  // no need to change below this line
  std::map<CaloHitID, float>::const_iterator mapitr;
  std::map<CaloHitID, float>::const_iterator endmapitr;
  if (myTrack.onEcal() > 0) {
    // Save ECAL hits
    updateECAL(myGrid.getHits(), onECAL, myTrack.id());
  }
 
  // Save HCAL hits
  updateHCAL(myHcalHitMaker.getHits(), myTrack.id());
 
  if (debug_)
    LogInfo("FastCalorimetry") << std::endl << " FASTEnergyReconstructor::MipShowerSimulation  finished " << std::endl;
}
 
void CalorimetryManager::readParameters(const edm::ParameterSet& fastCalo) {
  edm::ParameterSet ECALparameters = fastCalo.getParameter<edm::ParameterSet>("ECAL");
 
  evtsToDebug_ = fastCalo.getUntrackedParameter<std::vector<unsigned int> >("EvtsToDebug", std::vector<unsigned>());
  debug_ = fastCalo.getUntrackedParameter<bool>("Debug");
 
  bFixedLength_ = ECALparameters.getParameter<bool>("bFixedLength");
 
  gridSize_ = ECALparameters.getParameter<int>("GridSize");
  spotFraction_ = ECALparameters.getParameter<double>("SpotFraction");
  pulledPadSurvivalProbability_ = ECALparameters.getParameter<double>("FrontLeakageProbability");
  crackPadSurvivalProbability_ = ECALparameters.getParameter<double>("GapLossProbability");
  theCoreIntervals_ = ECALparameters.getParameter<std::vector<double> >("CoreIntervals");
  theTailIntervals_ = ECALparameters.getParameter<std::vector<double> >("TailIntervals");
 
  RCFactor_ = ECALparameters.getParameter<double>("RCFactor");
  RTFactor_ = ECALparameters.getParameter<double>("RTFactor");
  //changed after tuning - Feb-July - Shilpi Jain
  //  radiusFactor_ = ECALparameters.getParameter<double>("RadiusFactor");
  radiusFactorEE_ = ECALparameters.getParameter<double>("RadiusFactorEE");
  radiusFactorEB_ = ECALparameters.getParameter<double>("RadiusFactorEB");
  //(end of) changed after tuning - Feb-July - Shilpi Jain
  radiusPreshowerCorrections_ = ECALparameters.getParameter<std::vector<double> >("RadiusPreshowerCorrections");
  aTerm = 1. + radiusPreshowerCorrections_[1] * radiusPreshowerCorrections_[0];
  bTerm = radiusPreshowerCorrections_[0];
  mipValues_ = ECALparameters.getParameter<std::vector<double> >("MipsinGeV");
  simulatePreshower_ = ECALparameters.getParameter<bool>("SimulatePreshower");
 
  if (gridSize_ < 1)
    gridSize_ = 7;
  if (pulledPadSurvivalProbability_ < 0. || pulledPadSurvivalProbability_ > 1)
    pulledPadSurvivalProbability_ = 1.;
  if (crackPadSurvivalProbability_ < 0. || crackPadSurvivalProbability_ > 1)
    crackPadSurvivalProbability_ = 0.9;
 
  LogInfo("FastCalorimetry") << " Fast ECAL simulation parameters " << std::endl;
  LogInfo("FastCalorimetry") << " =============================== " << std::endl;
  if (simulatePreshower_)
    LogInfo("FastCalorimetry") << " The preshower is present " << std::endl;
  else
    LogInfo("FastCalorimetry") << " The preshower is NOT present " << std::endl;
  LogInfo("FastCalorimetry") << " Grid Size : " << gridSize_ << std::endl;
  if (spotFraction_ > 0.)
    LogInfo("FastCalorimetry") << " Spot Fraction : " << spotFraction_ << std::endl;
  else {
    LogInfo("FastCalorimetry") << " Core of the shower " << std::endl;
    for (unsigned ir = 0; ir < theCoreIntervals_.size() / 2; ++ir) {
      LogInfo("FastCalorimetry") << " r < " << theCoreIntervals_[ir * 2] << " R_M : " << theCoreIntervals_[ir * 2 + 1]
                                 << "        ";
    }
    LogInfo("FastCalorimetry") << std::endl;
 
    LogInfo("FastCalorimetry") << " Tail of the shower " << std::endl;
    for (unsigned ir = 0; ir < theTailIntervals_.size() / 2; ++ir) {
      LogInfo("FastCalorimetry") << " r < " << theTailIntervals_[ir * 2] << " R_M : " << theTailIntervals_[ir * 2 + 1]
                                 << "        ";
    }
    //changed after tuning - Feb-July - Shilpi Jain
    LogInfo("FastCalorimetry") << "Radius correction factors:  EB & EE " << radiusFactorEB_ << " : " << radiusFactorEE_
                               << std::endl;
    //(end of) changed after tuning - Feb-July - Shilpi Jain
    LogInfo("FastCalorimetry") << std::endl;
    if (mipValues_.size() > 2) {
      LogInfo("FastCalorimetry") << "Improper number of parameters for the preshower ; using 95keV" << std::endl;
      mipValues_.clear();
      mipValues_.resize(2, 0.000095);
    }
  }
 
  LogInfo("FastCalorimetry") << " FrontLeakageProbability : " << pulledPadSurvivalProbability_ << std::endl;
  LogInfo("FastCalorimetry") << " GapLossProbability : " << crackPadSurvivalProbability_ << std::endl;
 
  // RespCorrP: p (momentum), ECAL and HCAL corrections = f(p)
  edm::ParameterSet CalorimeterParam = fastCalo.getParameter<edm::ParameterSet>("CalorimeterProperties");
 
  rsp = CalorimeterParam.getParameter<std::vector<double> >("RespCorrP");
  LogInfo("FastCalorimetry") << " RespCorrP (rsp) size " << rsp.size() << std::endl;
 
  if (rsp.size() % 3 != 0) {
    LogInfo("FastCalorimetry") << " RespCorrP size is wrong -> no corrections applied !!!" << std::endl;
 
    p_knots.push_back(14000.);
    k_e.push_back(1.);
    k_h.push_back(1.);
  } else {
    for (unsigned i = 0; i < rsp.size(); i += 3) {
      LogInfo("FastCalorimetry") << "i = " << i / 3 << "   p = " << rsp[i] << "   k_e(p) = " << rsp[i + 1]
                                 << "   k_e(p) = " << rsp[i + 2] << std::endl;
 
      p_knots.push_back(rsp[i]);
      k_e.push_back(rsp[i + 1]);
      k_h.push_back(rsp[i + 2]);
    }
  }
 
  //FR
  edm::ParameterSet HCALparameters = fastCalo.getParameter<edm::ParameterSet>("HCAL");
  optionHDSim_ = HCALparameters.getParameter<int>("SimOption");
  hdGridSize_ = HCALparameters.getParameter<int>("GridSize");
  hdSimMethod_ = HCALparameters.getParameter<int>("SimMethod");
  //RF
 
  EcalDigitizer_ = ECALparameters.getUntrackedParameter<bool>("Digitizer", false);
  HcalDigitizer_ = HCALparameters.getUntrackedParameter<bool>("Digitizer", false);
  samplingHBHE_ = HCALparameters.getParameter<std::vector<double> >("samplingHBHE");
  samplingHF_ = HCALparameters.getParameter<std::vector<double> >("samplingHF");
  samplingHO_ = HCALparameters.getParameter<std::vector<double> >("samplingHO");
  ietaShiftHB_ = HCALparameters.getParameter<int>("ietaShiftHB");
  ietaShiftHE_ = HCALparameters.getParameter<int>("ietaShiftHE");
  ietaShiftHF_ = HCALparameters.getParameter<int>("ietaShiftHF");
  ietaShiftHO_ = HCALparameters.getParameter<int>("ietaShiftHO");
  timeShiftHB_ = HCALparameters.getParameter<std::vector<double> >("timeShiftHB");
  timeShiftHE_ = HCALparameters.getParameter<std::vector<double> >("timeShiftHE");
  timeShiftHF_ = HCALparameters.getParameter<std::vector<double> >("timeShiftHF");
  timeShiftHO_ = HCALparameters.getParameter<std::vector<double> >("timeShiftHO");
 
  // FastHFShowerLibrary
  edm::ParameterSet m_HS = fastCalo.getParameter<edm::ParameterSet>("HFShowerLibrary");
  useShowerLibrary = m_HS.getUntrackedParameter<bool>("useShowerLibrary", false);
  useCorrectionSL = m_HS.getUntrackedParameter<bool>("useCorrectionSL", false);
}
 
void CalorimetryManager::respCorr(double p) {
  int sizeP = p_knots.size();
 
  if (sizeP <= 1) {
    ecorr = 1.;
    hcorr = 1.;
  } else {
    int ip = -1;
    for (int i = 0; i < sizeP; i++) {
      if (p < p_knots[i]) {
        ip = i;
        break;
      }
    }
    if (ip == 0) {
      ecorr = k_e[0];
      hcorr = k_h[0];
    } else {
      if (ip == -1) {
        ecorr = k_e[sizeP - 1];
        hcorr = k_h[sizeP - 1];
      } else {
        double x1 = p_knots[ip - 1];
        double x2 = p_knots[ip];
        double y1 = k_e[ip - 1];
        double y2 = k_e[ip];
 
        ecorr = (y1 + (y2 - y1) * (p - x1) / (x2 - x1));
 
        y1 = k_h[ip - 1];
        y2 = k_h[ip];
        hcorr = (y1 + (y2 - y1) * (p - x1) / (x2 - x1));
      }
    }
  }
 
  if (debug_)
    LogInfo("FastCalorimetry") << " p, ecorr, hcorr = " << p << " " << ecorr << "  " << hcorr << std::endl;
}
 
void CalorimetryManager::updateECAL(const std::map<CaloHitID, float>& hitMap, int onEcal, int trackID, float corr) {
  std::map<CaloHitID, float>::const_iterator mapitr;
  std::map<CaloHitID, float>::const_iterator endmapitr = hitMap.end();
  if (onEcal == 1) {
    EBMapping_.reserve(EBMapping_.size() + hitMap.size());
    endmapitr = hitMap.end();
    for (mapitr = hitMap.begin(); mapitr != endmapitr; ++mapitr) {
      //correct energy
      float energy = mapitr->second;
      energy *= corr;
 
      //make finalized CaloHitID
      CaloHitID current_id(mapitr->first.unitID(), mapitr->first.timeSlice(), trackID);
 
      EBMapping_.push_back(std::pair<CaloHitID, float>(current_id, energy));
    }
  } else if (onEcal == 2) {
    EEMapping_.reserve(EEMapping_.size() + hitMap.size());
    endmapitr = hitMap.end();
    for (mapitr = hitMap.begin(); mapitr != endmapitr; ++mapitr) {
      //correct energy
      float energy = mapitr->second;
      energy *= corr;
 
      //make finalized CaloHitID
      CaloHitID current_id(mapitr->first.unitID(), mapitr->first.timeSlice(), trackID);
 
      EEMapping_.push_back(std::pair<CaloHitID, float>(current_id, energy));
    }
  }
}
 
void CalorimetryManager::updateHCAL(const std::map<CaloHitID, float>& hitMap, int trackID, float corr) {
  std::vector<double> hfcorrEm = myHDResponse_->getCorrHFem();
  std::vector<double> hfcorrHad = myHDResponse_->getCorrHFhad();
  std::map<CaloHitID, float>::const_iterator mapitr;
  std::map<CaloHitID, float>::const_iterator endmapitr = hitMap.end();
  HMapping_.reserve(HMapping_.size() + hitMap.size());
  for (mapitr = hitMap.begin(); mapitr != endmapitr; ++mapitr) {
    //correct energy
    float energy = mapitr->second;
    energy *= corr;
 
    float time = mapitr->first.timeSlice();
    //put energy into uncalibrated state for digitizer && correct timing
    if (HcalDigitizer_) {
      HcalDetId hdetid = HcalDetId(mapitr->first.unitID());
      if (hdetid.subdetId() == HcalBarrel) {
        energy /= samplingHBHE_[hdetid.ietaAbs() - 1];  //re-convert to GeV
        time = timeShiftHB_[hdetid.ietaAbs() - ietaShiftHB_];
      } else if (hdetid.subdetId() == HcalEndcap) {
        energy /= samplingHBHE_[hdetid.ietaAbs() - 1];  //re-convert to GeV
        time = timeShiftHE_[hdetid.ietaAbs() - ietaShiftHE_];
      } else if (hdetid.subdetId() == HcalForward) {
        if (useShowerLibrary) {
          if (useCorrectionSL) {
            if (hdetid.depth() == 1 or hdetid.depth() == 3)
              energy *= hfcorrEm[hdetid.ietaAbs() - ietaShiftHF_];
            if (hdetid.depth() == 2 or hdetid.depth() == 4)
              energy *= hfcorrHad[hdetid.ietaAbs() - ietaShiftHF_];
          }
        } else {
          if (hdetid.depth() == 1 or hdetid.depth() == 3)
            energy *= samplingHF_[0];
          if (hdetid.depth() == 2 or hdetid.depth() == 4)
            energy *= samplingHF_[1];
          time = timeShiftHF_[hdetid.ietaAbs() - ietaShiftHF_];
        }
      } else if (hdetid.subdetId() == HcalOuter) {
        energy /= samplingHO_[hdetid.ietaAbs() - 1];
        time = timeShiftHO_[hdetid.ietaAbs() - ietaShiftHO_];
      }
    }
 
    //make finalized CaloHitID
    CaloHitID current_id(mapitr->first.unitID(), time, trackID);
    HMapping_.push_back(std::pair<CaloHitID, float>(current_id, energy));
  }
}
 
void CalorimetryManager::updatePreshower(const std::map<CaloHitID, float>& hitMap, int trackID, float corr) {
  std::map<CaloHitID, float>::const_iterator mapitr;
  std::map<CaloHitID, float>::const_iterator endmapitr = hitMap.end();
  ESMapping_.reserve(ESMapping_.size() + hitMap.size());
  for (mapitr = hitMap.begin(); mapitr != endmapitr; ++mapitr) {
    //correct energy
    float energy = mapitr->second;
    energy *= corr;
 
    //make finalized CaloHitID
    CaloHitID current_id(mapitr->first.unitID(), mapitr->first.timeSlice(), trackID);
 
    ESMapping_.push_back(std::pair<CaloHitID, float>(current_id, energy));
  }
}
 
void CalorimetryManager::loadFromEcalBarrel(edm::PCaloHitContainer& c) const {
  c.reserve(c.size() + EBMapping_.size());
  for (unsigned i = 0; i < EBMapping_.size(); i++) {
    c.push_back(PCaloHit(EBDetId::unhashIndex(EBMapping_[i].first.unitID()),
                         EBMapping_[i].second,
                         EBMapping_[i].first.timeSlice(),
                         EBMapping_[i].first.trackID()));
  }
}
 
void CalorimetryManager::loadFromEcalEndcap(edm::PCaloHitContainer& c) const {
  c.reserve(c.size() + EEMapping_.size());
  for (unsigned i = 0; i < EEMapping_.size(); i++) {
    c.push_back(PCaloHit(EEDetId::unhashIndex(EEMapping_[i].first.unitID()),
                         EEMapping_[i].second,
                         EEMapping_[i].first.timeSlice(),
                         EEMapping_[i].first.trackID()));
  }
}
 
void CalorimetryManager::loadFromHcal(edm::PCaloHitContainer& c) const {
  c.reserve(c.size() + HMapping_.size());
  for (unsigned i = 0; i < HMapping_.size(); i++) {
    c.push_back(PCaloHit(DetId(HMapping_[i].first.unitID()),
                         HMapping_[i].second,
                         HMapping_[i].first.timeSlice(),
                         HMapping_[i].first.trackID()));
  }
}
 
void CalorimetryManager::loadFromPreshower(edm::PCaloHitContainer& c) const {
  c.reserve(c.size() + ESMapping_.size());
  for (unsigned i = 0; i < ESMapping_.size(); i++) {
    c.push_back(PCaloHit(ESMapping_[i].first.unitID(),
                         ESMapping_[i].second,
                         ESMapping_[i].first.timeSlice(),
                         ESMapping_[i].first.trackID()));
  }
}
 
// The main danger in this method is to screw up to relationships between particles
// So, the muon FSimTracks created by FSimEvent.cc are simply to be updated
void CalorimetryManager::loadMuonSimTracks(edm::SimTrackContainer& muons) const {
  unsigned size = muons.size();
  for (unsigned i = 0; i < size; ++i) {
    int id = muons[i].trackId();
    if (!(abs(muons[i].type()) == 13 || abs(muons[i].type()) == 1000024 ||
          (abs(muons[i].type()) > 1000100 && abs(muons[i].type()) < 1999999)))
      continue;
    // identify the corresponding muon in the local collection
 
    std::vector<FSimTrack>::const_iterator itcheck =
        find_if(muonSimTracks.begin(), muonSimTracks.end(), FSimTrackEqual(id));
    if (itcheck != muonSimTracks.end()) {
      muons[i].setTkPosition(itcheck->trackerSurfacePosition());
      muons[i].setTkMomentum(itcheck->trackerSurfaceMomentum());
    }
  }
}
 
void CalorimetryManager::harvestMuonSimTracks(edm::SimTrackContainer& c) const {
  c.reserve(int(0.2 * muonSimTracks.size() + 0.2 * savedMuonSimTracks.size() + 0.5));
  for (const auto& track : muonSimTracks) {
    if (track.momentum().perp2() > 1.0 && fabs(track.momentum().eta()) < 3.0 && track.isGlobal())
      c.push_back(track);
  }
  for (const auto& track : savedMuonSimTracks) {
    if (track.momentum().perp2() > 1.0 && fabs(track.momentum().eta()) < 3.0 && track.isGlobal())
      c.push_back(track);
  }
  c.shrink_to_fit();
}