PedsFullNoiseHistosUsingDb.cc

Go to the documentation of this file.

 
#include "DQM/SiStripCommissioningDbClients/interface/PedsFullNoiseHistosUsingDb.h"
#include "CondFormats/SiStripObjects/interface/PedsFullNoiseAnalysis.h"
#include "DataFormats/SiStripCommon/interface/SiStripConstants.h"
#include "DataFormats/SiStripCommon/interface/SiStripFecKey.h"
#include "DataFormats/SiStripCommon/interface/SiStripFedKey.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include <iostream>
 
using namespace sistrip;
 
// -----------------------------------------------------------------------------
PedsFullNoiseHistosUsingDb::PedsFullNoiseHistosUsingDb(const edm::ParameterSet& pset,
                                                       DQMStore* bei,
                                                       SiStripConfigDb* const db)
    : CommissioningHistograms(
          pset.getParameter<edm::ParameterSet>("PedsFullNoiseParameters"), bei, sistrip::PEDS_FULL_NOISE),
      CommissioningHistosUsingDb(db, sistrip::PEDS_FULL_NOISE),
      PedsFullNoiseHistograms(pset.getParameter<edm::ParameterSet>("PedsFullNoiseParameters"), bei) {
  LogTrace(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                         << " Constructing object...";
 
  highThreshold_ = this->pset().getParameter<double>("HighThreshold");
  lowThreshold_ = this->pset().getParameter<double>("LowThreshold");
 
  LogTrace(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                         << " Set FED zero suppression high/low threshold to " << highThreshold_ << "/"
                         << lowThreshold_;
 
  disableBadStrips_ = this->pset().getParameter<bool>("DisableBadStrips");
  keepStripsDisabled_ = this->pset().getParameter<bool>("KeepStripsDisabled");
  skipEmptyStrips_ = this->pset().getParameter<bool>("SkipEmptyStrips");
  uploadOnlyStripBadChannelBit_ = this->pset().getParameter<bool>("UploadOnlyStripBadChannelBit");
  uploadPedsFullNoiseDBTable_ = this->pset().getParameter<bool>("UploadPedsFullNoiseDBTable");
 
  LogTrace(mlDqmClient_) << "[PedestalsHistosUsingDb::" << __func__ << "]"
                         << " Disabling strips: " << disableBadStrips_
                         << " ; keeping previously disabled strips: " << keepStripsDisabled_
                         << " ; skip strips with no data: " << skipEmptyStrips_
                         << " ; upload only bad channel bit: " << uploadOnlyStripBadChannelBit_;
 
  allowSelectiveUpload_ =
      this->pset().existsAs<bool>("doSelectiveUpload") ? this->pset().getParameter<bool>("doSelectiveUpload") : false;
  LogTrace(mlDqmClient_) << "[PedestalsHistosUsingDb::" << __func__ << "]"
                         << " Selective upload of modules set to : " << allowSelectiveUpload_;
}
 
// -----------------------------------------------------------------------------
PedsFullNoiseHistosUsingDb::~PedsFullNoiseHistosUsingDb() {
  LogTrace(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                         << " Destructing object...";
}
 
// -----------------------------------------------------------------------------
void PedsFullNoiseHistosUsingDb::uploadConfigurations() {
  LogTrace(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]";
 
  if (!db()) {
    edm::LogError(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                << " NULL pointer to SiStripConfigDb interface!"
                                << " Aborting upload...";
    return;
  }
 
  // Update FED descriptions with new peds/noise values
  SiStripConfigDb::FedDescriptionsRange feds = db()->getFedDescriptions();
  update(feds);
  if (doUploadConf()) {  // check whether the upload HD config is set to true
 
    edm::LogVerbatim(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                   << " Uploading pedestals/noise to DB...";
 
    db()->uploadFedDescriptions();  // change the FED version
 
    edm::LogVerbatim(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                   << " Completed database upload of " << feds.size() << " FED descriptions!";
  } else {
    edm::LogWarning(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                  << " TEST! No pedestals/noise values will be uploaded to DB...";
  }
}
 
// -----------------------------------------------------------------------------
void PedsFullNoiseHistosUsingDb::update(SiStripConfigDb::FedDescriptionsRange feds) {
  // Iterate through feds and update fed descriptions
  uint16_t updated = 0;
  SiStripConfigDb::FedDescriptionsV::const_iterator ifed;
 
  for (ifed = feds.begin(); ifed != feds.end(); ifed++) {  // Loop on the FED for this partition
 
    for (uint16_t ichan = 0; ichan < sistrip::FEDCH_PER_FED; ichan++) {
      // Build FED and FEC keys from the cabling object i.e. checking if there is a connection
      const FedChannelConnection& conn = cabling()->fedConnection((*ifed)->getFedId(), ichan);
      if (conn.fecCrate() == sistrip::invalid_ || conn.fecSlot() == sistrip::invalid_ ||
          conn.fecRing() == sistrip::invalid_ || conn.ccuAddr() == sistrip::invalid_ ||
          conn.ccuChan() == sistrip::invalid_ || conn.lldChannel() == sistrip::invalid_)
        continue;
 
      // build the FED and FEC key from the connection object
      SiStripFedKey fed_key(conn.fedId(), SiStripFedKey::feUnit(conn.fedCh()), SiStripFedKey::feChan(conn.fedCh()));
 
      SiStripFecKey fec_key(
          conn.fecCrate(), conn.fecSlot(), conn.fecRing(), conn.ccuAddr(), conn.ccuChan(), conn.lldChannel());
 
      // Locate appropriate analysis object --> based on FEC keys cause they are per lldChannel
      Analyses::const_iterator iter = data(allowSelectiveUpload_).find(fec_key.key());
      if (iter != data(allowSelectiveUpload_).end()) {
        PedsFullNoiseAnalysis* anal = dynamic_cast<PedsFullNoiseAnalysis*>(iter->second);
 
        if (!anal) {
          edm::LogError(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                      << " NULL pointer to analysis object!";
          continue;
        }
 
        // Determine the pedestal shift to apply --> this is standard in the pedestal paylaod to avoid loss of signal from common-mode subtraction
        uint32_t pedshift = 127;
        for (uint16_t iapv = 0; iapv < sistrip::APVS_PER_FEDCH; iapv++) {
          uint32_t pedmin = (uint32_t)anal->pedsMin()[iapv];
          pedshift = pedmin < pedshift ? pedmin : pedshift;
        }
 
        // Iterate through APVs and strips
        for (uint16_t iapv = 0; iapv < sistrip::APVS_PER_FEDCH; iapv++) {
          for (uint16_t istr = 0; istr < anal->peds()[iapv].size(); istr++) {  // Loop on the pedestal for each APV
 
            if (not uploadOnlyStripBadChannelBit_ and anal->peds()[iapv][istr] < 1.) {  //@@ ie, zero
              edm::LogWarning(mlDqmClient_)
                  << "[PedestalsHistosUsingDb::" << __func__ << "]"
                  << " Skipping ZERO pedestal value (ie, NO UPLOAD TO DB!) for FedKey/Id/Ch: " << hex << setw(8)
                  << setfill('0') << fed_key.key() << dec << "/" << (*ifed)->getFedId() << "/" << ichan
                  << " and device with FEC/slot/ring/CCU/LLD " << fec_key.fecCrate() << "/" << fec_key.fecSlot() << "/"
                  << fec_key.fecRing() << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << "/"
                  << fec_key.channel();
              continue;  //@@ do not upload
            }
 
            // get the information on the strip as it was on the db
            Fed9U::Fed9UAddress addr(ichan, iapv, istr);
            Fed9U::Fed9UStripDescription temp = (*ifed)->getFedStrips().getStrip(addr);
 
            // determine whether we need to disable the strip
            bool disableStrip = false;
            std::stringstream ss_disable;
 
            if (temp.getDisable()) {  // strip already disabled in the database
              ss_disable << "Already Disabled: " << conn.fecCrate() << " " << conn.fecSlot() << " " << conn.fecRing()
                         << " " << conn.ccuAddr() << " " << conn.ccuChan() << " " << conn.lldChannel() << " " << iapv
                         << " " << istr << std::endl;
              if (keepStripsDisabled_)
                disableStrip = true;  // in case one wants to keep them disabled
            }
 
            // to disable new strips
            if (disableBadStrips_) {
              SiStripFedKey fed_key(anal->fedKey());
              PedsFullNoiseAnalysis::VInt dead = anal->deadStrip()[iapv];
              if (not skipEmptyStrips_ and  // if one don't want to skip dead strips
                  find(dead.begin(), dead.end(), istr) != dead.end()) {
                disableStrip = true;
                ss_disable << "Disabling Dead Strip: " << conn.fecCrate() << " " << conn.fecSlot() << " "
                           << conn.fecRing() << " " << conn.ccuAddr() << " " << conn.ccuChan() << " "
                           << conn.lldChannel() << " " << iapv << " " << istr << std::endl;
              }
 
              PedsFullNoiseAnalysis::VInt badcChan =
                  anal->badStrip()[iapv];  // new feature --> this is the sample of the whole bad strips from the analysis
              if (not disableStrip) {
                if (find(badcChan.begin(), badcChan.end(), istr) != badcChan.end()) {
                  disableStrip = true;
                  ss_disable << "Disabling Bad strip: " << conn.fecCrate() << " " << conn.fecSlot() << " "
                             << conn.fecRing() << " " << conn.ccuAddr() << " " << conn.ccuChan() << " "
                             << conn.lldChannel() << " " << iapv << " " << istr << std::endl;
                }
              }
            }
 
            if (edm::isDebugEnabled())
              LogTrace(mlDqmClient_) << ss_disable.str();
 
            uint32_t pedestalVal = 0;
            float noiseVal = 0;
            float lowThr = 0;
            float highThr = 0;
 
            // download the previous pedestal/noise payload from the DB
            if (uploadOnlyStripBadChannelBit_) {
              pedestalVal = static_cast<uint32_t>(temp.getPedestal());
              noiseVal = static_cast<float>(temp.getNoise());
              lowThr = static_cast<float>(temp.getLowThresholdFactor());
              highThr = static_cast<float>(temp.getHighThresholdFactor());
            } else {
              pedestalVal = static_cast<uint32_t>(anal->peds()[iapv][istr] - pedshift);
              noiseVal = anal->noise()[iapv][istr];
              lowThr = lowThreshold_;
              highThr = highThreshold_;
            }
 
            Fed9U::Fed9UStripDescription data(pedestalVal, highThr, lowThr, noiseVal, disableStrip);
 
            std::stringstream ss;
            if (data.getDisable() && edm::isDebugEnabled()) {
              ss << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                 << " Disabling strip in Fed9UStripDescription object..." << std::endl
                 << " for FED id/channel and APV/strip : " << fed_key.fedId() << "/" << fed_key.fedChannel() << " "
                 << iapv << "/" << istr << std::endl
                 << " and crate/FEC/ring/CCU/module    : " << fec_key.fecCrate() << "/" << fec_key.fecSlot() << "/"
                 << fec_key.fecRing() << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << std::endl
                 << " from ped/noise/high/low/disable  : " << static_cast<uint32_t>(temp.getPedestal()) << "/"
                 << static_cast<float>(temp.getHighThresholdFactor()) << "/"
                 << static_cast<float>(temp.getLowThresholdFactor()) << "/" << static_cast<float>(temp.getNoise())
                 << "/" << static_cast<uint16_t>(temp.getDisable()) << std::endl;
            }
 
            (*ifed)->getFedStrips().setStrip(addr, data);
 
            if (data.getDisable() && edm::isDebugEnabled()) {
              ss << " to ped/noise/high/low/disable    : " << static_cast<uint32_t>(data.getPedestal()) << "/"
                 << static_cast<float>(data.getHighThresholdFactor()) << "/"
                 << static_cast<float>(data.getLowThresholdFactor()) << "/" << static_cast<float>(data.getNoise())
                 << "/" << static_cast<uint16_t>(data.getDisable()) << std::endl;
              LogTrace(mlDqmClient_) << ss.str();
            }
          }  // end loop on strips
        }    // end loop on apvs
        updated++;
      } else {  // device not found in the analysis
        if (deviceIsPresent(fec_key)) {
          edm::LogWarning(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                        << " Unable to find pedestals/noise for FedKey/Id/Ch: " << hex << setw(8)
                                        << setfill('0') << fed_key.key() << dec << "/" << (*ifed)->getFedId() << "/"
                                        << ichan << " and device with FEC/slot/ring/CCU/LLD " << fec_key.fecCrate()
                                        << "/" << fec_key.fecSlot() << "/" << fec_key.fecRing() << "/"
                                        << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << "/" << fec_key.channel();
        }
      }
    }
  }
 
  edm::LogVerbatim(mlDqmClient_) << "[PedsFullNoiseHistosUsingDb::" << __func__ << "]"
                                 << " Updated FED pedestals/noise for " << updated << " channels";
}
 
// -----------------------------------------------------------------------------
void PedsFullNoiseHistosUsingDb::create(SiStripConfigDb::AnalysisDescriptionsV& desc, Analysis analysis) {
  PedsFullNoiseAnalysis* anal = dynamic_cast<PedsFullNoiseAnalysis*>(analysis->second);
 
  if (!anal) {
    return;
  }
 
  SiStripFecKey fec_key(anal->fecKey());
  SiStripFedKey fed_key(anal->fedKey());
 
  for (uint16_t iapv = 0; iapv < 2; ++iapv) {
    // Create a description for the standard pedestal analysis
    PedestalsAnalysisDescription* pedestalDescription;
    pedestalDescription =
        new PedestalsAnalysisDescription(anal->deadStripBit()[iapv],
                                         anal->badStripBit()[iapv],
                                         anal->pedsMean()[iapv],
                                         anal->pedsSpread()[iapv],
                                         anal->noiseMean()[iapv],
                                         anal->noiseSpread()[iapv],
                                         anal->rawMean()[iapv],
                                         anal->rawSpread()[iapv],
                                         anal->pedsMax()[iapv],
                                         anal->pedsMin()[iapv],
                                         anal->noiseMax()[iapv],
                                         anal->noiseMin()[iapv],
                                         anal->rawMax()[iapv],
                                         anal->rawMin()[iapv],
                                         fec_key.fecCrate(),
                                         fec_key.fecSlot(),
                                         fec_key.fecRing(),
                                         fec_key.ccuAddr(),
                                         fec_key.ccuChan(),
                                         SiStripFecKey::i2cAddr(fec_key.lldChan(), !iapv),
                                         db()->dbParams().partitions().begin()->second.partitionName(),
                                         db()->dbParams().partitions().begin()->second.runNumber(),
                                         anal->isValid(),
                                         "",
                                         fed_key.fedId(),
                                         fed_key.feUnit(),
                                         fed_key.feChan(),
                                         fed_key.fedApv());
 
    // Add comments
    typedef std::vector<std::string> Strings;
    Strings errors = anal->getErrorCodes();
    Strings::const_iterator istr = errors.begin();
    Strings::const_iterator jstr = errors.end();
    for (; istr != jstr; ++istr) {
      pedestalDescription->addComments(*istr);
    }
 
    // Store description
    desc.push_back(pedestalDescription);
 
    // Create description
    if (uploadPedsFullNoiseDBTable_) {
      PedsFullNoiseAnalysisDescription* pedsFullNoiseDescription;
      pedsFullNoiseDescription = new PedsFullNoiseAnalysisDescription(
          anal->deadStrip()[iapv],
          anal->badStrip()[iapv],
          anal->shiftedStrip()[iapv],            // bad strip-id within an APV due to offset
          anal->lowNoiseStrip()[iapv],           // bad strip-id within an APV due to noise
          anal->largeNoiseStrip()[iapv],         // bad strip-id within an APV due to noise
          anal->largeNoiseSignificance()[iapv],  // bad strip-id within an APV due to noise significance
          anal->badFitStatus()[iapv],            // bad strip-id within an APV due to fit status
          anal->badADProbab()[iapv],             // bad strip-id within an APV due to AD probab
          anal->badKSProbab()[iapv],             // bad strip-id within an APV due to KS probab
          anal->badJBProbab()[iapv],             // bad strip-id within an APV due to JB probab
          anal->badChi2Probab()[iapv],           // bad strip-id within an APV due to Chi2 probab
          anal->badTailStrip()[iapv],            // bad strip-id within an APV due to tail
          anal->badDoublePeakStrip()[iapv],      // bad strip-id within an APV due to Double peaks
          anal->adProbab()[iapv],    // one value oer strip
          anal->ksProbab()[iapv],    // one value oer strip
          anal->jbProbab()[iapv],    // one value oer strip
          anal->chi2Probab()[iapv],  // one value oer strip
          anal->residualRMS()[iapv],
          anal->residualSigmaGaus()[iapv],
          anal->noiseSignificance()[iapv],
          anal->residualSkewness()[iapv],
          anal->residualKurtosis()[iapv],
          anal->residualIntegralNsigma()[iapv],
          anal->residualIntegral()[iapv],
          fec_key.fecCrate(),
          fec_key.fecSlot(),
          fec_key.fecRing(),
          fec_key.ccuAddr(),
          fec_key.ccuChan(),
          SiStripFecKey::i2cAddr(fec_key.lldChan(), !iapv),
          db()->dbParams().partitions().begin()->second.partitionName(),
          db()->dbParams().partitions().begin()->second.runNumber(),
          anal->isValid(),
          "",
          fed_key.fedId(),
          fed_key.feUnit(),
          fed_key.feChan(),
          fed_key.fedApv());
      istr = errors.begin();
      jstr = errors.end();
      for (; istr != jstr; ++istr) {
        pedsFullNoiseDescription->addComments(*istr);
      }
 
      // Store description
      desc.push_back(pedsFullNoiseDescription);
    }
  }
}