L1TMonitorClient_cff.py

Go to the documentation of this file.

import FWCore.ParameterSet.Config as cms
 
# L1 Trigger client DQM sequence
#
# used by DQM GUI: DQM/Integration/python/test/l1t_dqm_sourceclient-*_cfg.py
#
# standard RawToDigi sequence must be run before the L1T module, labels 
# from the standard sequence are used as default for the L1 DQM modules
# any configuration change in the unpacking must be done in l1t_dqm_sourceclient-*_cfg.py
#
# see CVS for previous authors
#
# V.M. Ghete 2011-05-26 revised version of L1 Trigger client DQM
#                       
 
# DQM quality tests 
from DQM.L1TMonitorClient.L1TriggerQualityTests_cff import *
 
#
# DQM client modules
#
 
# Bx Timing DQM client module- not available
 
# LTC DQM client module- not available
 
# ECAL TPG client DQM module
# not run in L1T - do we need it? FIXME
 
# HCAL TPG DQM module 
# not run in L1T - do we need it? FIXME
 
# RCT DQM client module - not available
#from DQM.L1TMonitorClient.L1TRCTClient_cfi import *
 
# GCT DQM client module 
from DQM.L1TMonitorClient.L1TGCTClient_cfi import *
from DQM.L1TMonitorClient.L1TStage1Layer2Client_cfi import *
 
# DTTPG DQM module 
# not run in L1T - do we need it? FIXME
 
# DTTF DQM client module 
from DQM.L1TMonitorClient.L1TDTTFClient_cfi import *
 
# CSCTPG DQM module 
# not run in L1T - do we need it? FIXME
 
# CSCTF DQM client module 
from DQM.L1TMonitorClient.L1TCSCTFClient_cfi import * 
 
# RPC DQM client module - non-standard name of the module
from DQM.L1TMonitorClient.L1TRPCTFClient_cfi import *
 
# GMT DQM module 
from DQM.L1TMonitorClient.L1TGMTClient_cfi import *
 
# GT DQM client module - not available 
#from DQM.L1TMonitorClient.L1TGTClient_cfi import *
 
# L1Extra DQM client module - not available 
 
# L1 rates DQM client module
# L1 synchronization DQM client module
# L1 occupancy DQM client module
from DQM.L1TMonitorClient.L1TOccupancyClient_cff import *
from DQM.L1TMonitorClient.L1TTestsSummary_cff import *
 
# L1 event info DQM client 
from DQM.L1TMonitorClient.L1TEventInfoClient_cfi import *
 
#
# other, non pure-L1 stuff
#
 
# scaler modules (SM and SCAL) - it uses DQM.TrigXMonitorClient
from DQM.TrigXMonitorClient.L1TScalersClient_cfi import *
l1tsClient.dqmFolder = cms.untracked.string("L1T/L1Scalers_SM")
 
 
 
#
# define sequences 
#
 
# L1T monitor client sequence (system clients and quality tests)
l1TriggerClients = cms.Sequence(
                        l1tGctClient +
                        l1tDttfClient +
                        l1tCsctfClient + 
                        l1tRpctfClient +
                        l1tGmtClient +
                        l1tOccupancyClient +
                        l1tTestsSummary +
                        l1tEventInfoClient
                        )
 
l1TriggerStage1Clients = cms.Sequence(
                        l1tStage1Layer2Client +
                        l1tDttfClient +
                        l1tCsctfClient + 
                        l1tRpctfClient +
                        l1tGmtClient +
                        l1tOccupancyClient +
                        l1tTestsSummary +
                        l1tEventInfoClient
                        )
 
 
l1tMonitorClient = cms.Sequence(
                        l1TriggerQualityTests +
                        l1TriggerClients
                        )
 
l1tMonitorStage1Client = cms.Sequence(
                        l1TriggerQualityTests +
                        l1TriggerStage1Clients
                        )
 
 
# sequence for L1 Trigger DQM client modules on EndPath 
# FIXME clarify why needed on EndPath
 
l1tMonitorClientEndPathSeq = cms.Sequence(
                                l1tsClient
                                )