CMS 3D CMS Logo
CSCOfflineMonitor.cc
Go to the documentation of this file.
1 /*
2  * Offline DQM module for CSC local reconstruction - based on CSCValidation
3  *
4  */
5 
6 #include "DQMOffline/Muon/interface/CSCOfflineMonitor.h"
7 
8 using namespace std;
9 
11 // CONSTRUCTOR //
13 CSCOfflineMonitor::CSCOfflineMonitor(const edm::ParameterSet& pset)
14 {
15 
16  rd_token = consumes<FEDRawDataCollection>( pset.getParameter<edm::InputTag>("FEDRawDataCollectionTag") );
17  sd_token = consumes<CSCStripDigiCollection>( pset.getParameter<edm::InputTag>("stripDigiTag") );
18  wd_token = consumes<CSCWireDigiCollection>( pset.getParameter<edm::InputTag>("wireDigiTag") );
19  al_token = consumes<CSCALCTDigiCollection>( pset.getParameter<edm::InputTag>("alctDigiTag") );
20  cl_token = consumes<CSCCLCTDigiCollection>( pset.getParameter<edm::InputTag>("clctDigiTag") );
21  rh_token = consumes<CSCRecHit2DCollection>( pset.getParameter<edm::InputTag>("cscRecHitTag") );
22  se_token = consumes<CSCSegmentCollection>( pset.getParameter<edm::InputTag>("cscSegTag") );
23 
24 }
25 
26 void CSCOfflineMonitor::bookHistograms(DQMStore::IBooker & ibooker,
27  edm::Run const & iRun,
28  edm::EventSetup const & /* iSetup */)
29 {
30  // occupancies
31  ibooker.cd();
32  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Occupancy");
33 
34  hCSCOccupancy = ibooker.book1D("hCSCOccupancy","overall CSC occupancy",13,-0.5,12.5);
35  hCSCOccupancy->setBinLabel(2,"Total Events");
36  hCSCOccupancy->setBinLabel(4,"# Events with Wires");
37  hCSCOccupancy->setBinLabel(6,"# Events with Strips");
38  hCSCOccupancy->setBinLabel(8,"# Events with Wires&Strips");
39  hCSCOccupancy->setBinLabel(10,"# Events with Rechits");
40  hCSCOccupancy->setBinLabel(12,"# Events with Segments");
41  hOWiresAndCLCT = ibooker.book2D("hOWiresAndCLCT","Wire and CLCT Digi Occupancy ",36,0.5,36.5,20,0.5,20.5);
42  hOWires = ibooker.book2D("hOWires","Wire Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
43  hOWireSerial = ibooker.book1D("hOWireSerial","Wire Occupancy by Chamber Serial",601,-0.5,600.5);
44  hOWireSerial->setAxisTitle("Chamber Serial Number");
45  hOStrips = ibooker.book2D("hOStrips","Strip Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
46  hOStripSerial = ibooker.book1D("hOStripSerial","Strip Occupancy by Chamber Serial",601,-0.5,600.5);
47  hOStripSerial->setAxisTitle("Chamber Serial Number");
48  hOStripsAndWiresAndCLCT = ibooker.book2D("hOStripsAndWiresAndCLCT","Strip And Wire And CLCT Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
49  hOStripsAndWiresAndCLCT->setAxisTitle("Chamber #");
50  hORecHits = ibooker.book2D("hORecHits","RecHit Occupancy",36,0.5,36.5,20,0.5,20.5);
51  hORecHitsSerial = ibooker.book1D("hORecHitSerial","RecHit Occupancy by Chamber Serial",601,-0.5,600.5);
52  hORecHitsSerial->setAxisTitle("Chamber Serial Number");
53  hOSegments = ibooker.book2D("hOSegments","Segment Occupancy",36,0.5,36.5,20,0.5,20.5);
54  hOSegmentsSerial = ibooker.book1D("hOSegmentSerial","Segment Occupancy by Chamber Serial",601,-0.5,600.5);
55  hOSegmentsSerial->setAxisTitle("Chamber Serial Number");
56 
57  // wire digis
58  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Digis");
59 
60  hWirenGroupsTotal = ibooker.book1D("hWirenGroupsTotal","Fired Wires per Event; # Wiregroups Fired",500,-0.5,499.5);
61  hWireTBin.push_back(ibooker.book1D("hWireTBin_m42","Wire TBin Fired (ME -4/2); Time Bin (25ns)",17,-0.5,16.5));
62  hWireTBin.push_back(ibooker.book1D("hWireTBin_m41","Wire TBin Fired (ME -4/1); Time Bin (25ns)",17,-0.5,16.5));
63  hWireTBin.push_back(ibooker.book1D("hWireTBin_m32","Wire TBin Fired (ME -3/2); Time Bin (25ns)",17,-0.5,16.5));
64  hWireTBin.push_back(ibooker.book1D("hWireTBin_m31","Wire TBin Fired (ME -3/1); Time Bin (25ns)",17,-0.5,16.5));
65  hWireTBin.push_back(ibooker.book1D("hWireTBin_m22","Wire TBin Fired (ME -2/2); Time Bin (25ns)",17,-0.5,16.5));
66  hWireTBin.push_back(ibooker.book1D("hWireTBin_m21","Wire TBin Fired (ME -2/1); Time Bin (25ns)",17,-0.5,16.5));
67  hWireTBin.push_back(ibooker.book1D("hWireTBin_m11a","Wire TBin Fired (ME -1/1a); Time Bin (25ns)",17,-0.5,16.5));
68  hWireTBin.push_back(ibooker.book1D("hWireTBin_m13","Wire TBin Fired (ME -1/3); Time Bin (25ns)",17,-0.5,16.5));
69  hWireTBin.push_back(ibooker.book1D("hWireTBin_m12","Wire TBin Fired (ME -1/2); Time Bin (25ns)",17,-0.5,16.5));
70  hWireTBin.push_back(ibooker.book1D("hWireTBin_m11b","Wire TBin Fired (ME -1/1b); Time Bin (25ns)",17,-0.5,16.5));
71  hWireTBin.push_back(ibooker.book1D("hWireTBin_p11b","Wire TBin Fired (ME +1/1b); Time Bin (25ns)",17,-0.5,16.5));
72  hWireTBin.push_back(ibooker.book1D("hWireTBin_p12","Wire TBin Fired (ME +1/2); Time Bin (25ns)",17,-0.5,16.5));
73  hWireTBin.push_back(ibooker.book1D("hWireTBin_p13","Wire TBin Fired (ME +1/3); Time Bin (25ns)",17,-0.5,16.5));
74  hWireTBin.push_back(ibooker.book1D("hWireTBin_p11a","Wire TBin Fired (ME +1/1a); Time Bin (25ns)",17,-0.5,16.5));
75  hWireTBin.push_back(ibooker.book1D("hWireTBin_p21","Wire TBin Fired (ME +2/1); Time Bin (25ns)",17,-0.5,16.5));
76  hWireTBin.push_back(ibooker.book1D("hWireTBin_p22","Wire TBin Fired (ME +2/2); Time Bin (25ns)",17,-0.5,16.5));
77  hWireTBin.push_back(ibooker.book1D("hWireTBin_p31","Wire TBin Fired (ME +3/1); Time Bin (25ns)",17,-0.5,16.5));
78  hWireTBin.push_back(ibooker.book1D("hWireTBin_p32","Wire TBin Fired (ME +3/2); Time Bin (25ns)",17,-0.5,16.5));
79  hWireTBin.push_back(ibooker.book1D("hWireTBin_p41","Wire TBin Fired (ME +4/1); Time Bin (25ns)",17,-0.5,16.5));
80  hWireTBin.push_back(ibooker.book1D("hWireTBin_p42","Wire TBin Fired (ME +4/2); Time Bin (25ns)",17,-0.5,16.5));
81  hWireNumber.push_back(ibooker.book1D("hWireNumber_m42","Wiregroup Number Fired (ME -4/2); Wiregroup #",113,-0.5,112.5));
82  hWireNumber.push_back(ibooker.book1D("hWireNumber_m41","Wiregroup Number Fired (ME -4/1); Wiregroup #",113,-0.5,112.5));
83  hWireNumber.push_back(ibooker.book1D("hWireNumber_m32","Wiregroup Number Fired (ME -3/2); Wiregroup #",113,-0.5,112.5));
84  hWireNumber.push_back(ibooker.book1D("hWireNumber_m31","Wiregroup Number Fired (ME -3/1); Wiregroup #",113,-0.5,112.5));
85  hWireNumber.push_back(ibooker.book1D("hWireNumber_m22","Wiregroup Number Fired (ME -2/2); Wiregroup #",113,-0.5,112.5));
86  hWireNumber.push_back(ibooker.book1D("hWireNumber_m21","Wiregroup Number Fired (ME -2/1); Wiregroup #",113,-0.5,112.5));
87  hWireNumber.push_back(ibooker.book1D("hWireNumber_m11a","Wiregroup Number Fired (ME -1/1a); Wiregroup #",113,-0.5,112.5));
88  hWireNumber.push_back(ibooker.book1D("hWireNumber_m13","Wiregroup Number Fired (ME -1/3); Wiregroup #",113,-0.5,112.5));
89  hWireNumber.push_back(ibooker.book1D("hWireNumber_m12","Wiregroup Number Fired (ME -1/2); Wiregroup #",113,-0.5,112.5));
90  hWireNumber.push_back(ibooker.book1D("hWireNumber_m11b","Wiregroup Number Fired (ME -1/1b); Wiregroup #",113,-0.5,112.5));
91  hWireNumber.push_back(ibooker.book1D("hWireNumber_p11b","Wiregroup Number Fired (ME +1/1b); Wiregroup #",113,-0.5,112.5));
92  hWireNumber.push_back(ibooker.book1D("hWireNumber_p12","Wiregroup Number Fired (ME +1/2); Wiregroup #",113,-0.5,112.5));
93  hWireNumber.push_back(ibooker.book1D("hWireNumber_p13","Wiregroup Number Fired (ME +1/3); Wiregroup #",113,-0.5,112.5));
94  hWireNumber.push_back(ibooker.book1D("hWireNumber_p11a","Wiregroup Number Fired (ME +1/1a); Wiregroup #",113,-0.5,112.5));
95  hWireNumber.push_back(ibooker.book1D("hWireNumber_p21","Wiregroup Number Fired (ME +2/1); Wiregroup #",113,-0.5,112.5));
96  hWireNumber.push_back(ibooker.book1D("hWireNumber_p22","Wiregroup Number Fired (ME +2/2); Wiregroup #",113,-0.5,112.5));
97  hWireNumber.push_back(ibooker.book1D("hWireNumber_p31","Wiregroup Number Fired (ME +3/1); Wiregroup #",113,-0.5,112.5));
98  hWireNumber.push_back(ibooker.book1D("hWireNumber_p32","Wiregroup Number Fired (ME +3/2); Wiregroup #",113,-0.5,112.5));
99  hWireNumber.push_back(ibooker.book1D("hWireNumber_p41","Wiregroup Number Fired (ME +4/1); Wiregroup #",113,-0.5,112.5));
100  hWireNumber.push_back(ibooker.book1D("hWireNumber_p42","Wiregroup Number Fired (ME +4/2); Wiregroup #",113,-0.5,112.5));
101 
102  // strip digis
103  hStripNFired = ibooker.book1D("hStripNFired","Fired Strips per Event; # Strips Fired (above 13 ADC)",1000,-0.5,999.5);
104  hStripNumber.push_back(ibooker.book1D("hStripNumber_m42","Strip Number Fired (ME -4/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
105  hStripNumber.push_back(ibooker.book1D("hStripNumber_m41","Strip Number Fired (ME -4/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
106  hStripNumber.push_back(ibooker.book1D("hStripNumber_m32","Strip Number Fired (ME -3/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
107  hStripNumber.push_back(ibooker.book1D("hStripNumber_m31","Strip Number Fired (ME -3/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
108  hStripNumber.push_back(ibooker.book1D("hStripNumber_m22","Strip Number Fired (ME -2/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
109  hStripNumber.push_back(ibooker.book1D("hStripNumber_m21","Strip Number Fired (ME -2/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
110  hStripNumber.push_back(ibooker.book1D("hStripNumber_m11a","Strip Number Fired (ME -1/1a); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
111  hStripNumber.push_back(ibooker.book1D("hStripNumber_m13","Strip Number Fired (ME -1/3); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
112  hStripNumber.push_back(ibooker.book1D("hStripNumber_m12","Strip Number Fired (ME -1/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
113  hStripNumber.push_back(ibooker.book1D("hStripNumber_m11b","Strip Number Fired (ME -1/1b); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
114  hStripNumber.push_back(ibooker.book1D("hStripNumber_p11b","Strip Number Fired (ME +1/1b); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
115  hStripNumber.push_back(ibooker.book1D("hStripNumber_p12","Strip Number Fired (ME +1/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
116  hStripNumber.push_back(ibooker.book1D("hStripNumber_p13","Strip Number Fired (ME +1/3); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
117  hStripNumber.push_back(ibooker.book1D("hStripNumber_p11a","Strip Number Fired (ME +1/1a); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
118  hStripNumber.push_back(ibooker.book1D("hStripNumber_p21","Strip Number Fired (ME +2/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
119  hStripNumber.push_back(ibooker.book1D("hStripNumber_p22","Strip Number Fired (ME +2/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
120  hStripNumber.push_back(ibooker.book1D("hStripNumber_p31","Strip Number Fired (ME +3/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
121  hStripNumber.push_back(ibooker.book1D("hStripNumber_p32","Strip Number Fired (ME +3/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
122  hStripNumber.push_back(ibooker.book1D("hStripNumber_p41","Strip Number Fired (ME +4/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
123  hStripNumber.push_back(ibooker.book1D("hStripNumber_p42","Stripgroup Number Fired (ME +4/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
124 
125  // pedestal noise
126  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/PedestalNoise");
127 
128  hStripPed.push_back(ibooker.book1D("hStripPedMEm42","Pedestal Noise Distribution Chamber ME -4/2; ADC Counts",50,-25.,25.));
129  hStripPed.push_back(ibooker.book1D("hStripPedMEm41","Pedestal Noise Distribution Chamber ME -4/1; ADC Counts",50,-25.,25.));
130  hStripPed.push_back(ibooker.book1D("hStripPedMEm32","Pedestal Noise Distribution Chamber ME -3/2; ADC Counts",50,-25.,25.));
131  hStripPed.push_back(ibooker.book1D("hStripPedMEm31","Pedestal Noise Distribution Chamber ME -3/1; ADC Counts",50,-25.,25.));
132  hStripPed.push_back(ibooker.book1D("hStripPedMEm22","Pedestal Noise Distribution Chamber ME -2/2; ADC Counts",50,-25.,25.));
133  hStripPed.push_back(ibooker.book1D("hStripPedMEm21","Pedestal Noise Distribution Chamber ME -2/1; ADC Counts",50,-25.,25.));
134  hStripPed.push_back(ibooker.book1D("hStripPedMEm11a","Pedestal Noise Distribution Chamber ME -1/1; ADC Counts",50,-25.,25.));
135  hStripPed.push_back(ibooker.book1D("hStripPedMEm13","Pedestal Noise Distribution Chamber ME -1/3; ADC Counts",50,-25.,25.));
136  hStripPed.push_back(ibooker.book1D("hStripPedMEm12","Pedestal Noise Distribution Chamber ME -1/2; ADC Counts",50,-25.,25.));
137  hStripPed.push_back(ibooker.book1D("hStripPedMEm11b","Pedestal Noise Distribution Chamber ME -1/1; ADC Counts",50,-25.,25.));
138  hStripPed.push_back(ibooker.book1D("hStripPedMEp11b","Pedestal Noise Distribution Chamber ME +1/1; ADC Counts",50,-25.,25.));
139  hStripPed.push_back(ibooker.book1D("hStripPedMEp12","Pedestal Noise Distribution Chamber ME +1/2; ADC Counts",50,-25.,25.));
140  hStripPed.push_back(ibooker.book1D("hStripPedMEp13","Pedestal Noise Distribution Chamber ME +1/3; ADC Counts",50,-25.,25.));
141  hStripPed.push_back(ibooker.book1D("hStripPedMEp11a","Pedestal Noise Distribution Chamber ME +1/1; ADC Counts",50,-25.,25.));
142  hStripPed.push_back(ibooker.book1D("hStripPedMEp21","Pedestal Noise Distribution Chamber ME +2/1; ADC Counts",50,-25.,25.));
143  hStripPed.push_back(ibooker.book1D("hStripPedMEp22","Pedestal Noise Distribution Chamber ME +2/2; ADC Counts",50,-25.,25.));
144  hStripPed.push_back(ibooker.book1D("hStripPedMEp31","Pedestal Noise Distribution Chamber ME +3/1; ADC Counts",50,-25.,25.));
145  hStripPed.push_back(ibooker.book1D("hStripPedMEp32","Pedestal Noise Distribution Chamber ME +3/2; ADC Counts",50,-25.,25.));
146  hStripPed.push_back(ibooker.book1D("hStripPedMEp41","Pedestal Noise Distribution Chamber ME +4/1; ADC Counts",50,-25.,25.));
147  hStripPed.push_back(ibooker.book1D("hStripPedMEp42","Pedestal Noise Distribution Chamber ME +4/2; ADC Counts",50,-25.,25.));
148 
149  // rechits
150  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/recHits");
151 
152  hRHnrechits = ibooker.book1D("hRHnrechits","recHits per Event (all chambers); # of RecHits",500,-0.50,499.5);
153  hRHGlobal.push_back(ibooker.book2D("hRHGlobalp1","recHit global X,Y station +1; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
154  hRHGlobal.push_back(ibooker.book2D("hRHGlobalp2","recHit global X,Y station +2; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
155  hRHGlobal.push_back(ibooker.book2D("hRHGlobalp3","recHit global X,Y station +3; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
156  hRHGlobal.push_back(ibooker.book2D("hRHGlobalp4","recHit global X,Y station +4; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
157  hRHGlobal.push_back(ibooker.book2D("hRHGlobalm1","recHit global X,Y station -1; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
158  hRHGlobal.push_back(ibooker.book2D("hRHGlobalm2","recHit global X,Y station -2; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
159  hRHGlobal.push_back(ibooker.book2D("hRHGlobalm3","recHit global X,Y station -3; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
160  hRHGlobal.push_back(ibooker.book2D("hRHGlobalm4","recHit global X,Y station -4; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
161  hRHSumQ.push_back(ibooker.book1D("hRHSumQm42","Sum 3x3 recHit Charge (ME -4/2); ADC counts",100,0,2000));
162  hRHSumQ.push_back(ibooker.book1D("hRHSumQm41","Sum 3x3 recHit Charge (ME -4/1); ADC counts",100,0,2000));
163  hRHSumQ.push_back(ibooker.book1D("hRHSumQm32","Sum 3x3 recHit Charge (ME -3/2); ADC counts",100,0,2000));
164  hRHSumQ.push_back(ibooker.book1D("hRHSumQm31","Sum 3x3 recHit Charge (ME -3/1); ADC counts",100,0,2000));
165  hRHSumQ.push_back(ibooker.book1D("hRHSumQm22","Sum 3x3 recHit Charge (ME -2/2); ADC counts",100,0,2000));
166  hRHSumQ.push_back(ibooker.book1D("hRHSumQm21","Sum 3x3 recHit Charge (ME -2/1); ADC counts",100,0,2000));
167  hRHSumQ.push_back(ibooker.book1D("hRHSumQm11a","Sum 3x3 recHit Charge (ME -1/1a); ADC counts",100,0,4000));
168  hRHSumQ.push_back(ibooker.book1D("hRHSumQm13","Sum 3x3 recHit Charge (ME -1/3); ADC counts",100,0,2000));
169  hRHSumQ.push_back(ibooker.book1D("hRHSumQm12","Sum 3x3 recHit Charge (ME -1/2); ADC counts",100,0,2000));
170  hRHSumQ.push_back(ibooker.book1D("hRHSumQm11b","Sum 3x3 recHit Charge (ME -1/1b); ADC counts",100,0,4000));
171  hRHSumQ.push_back(ibooker.book1D("hRHSumQp11b","Sum 3x3 recHit Charge (ME +1/1b); ADC counts",100,0,4000));
172  hRHSumQ.push_back(ibooker.book1D("hRHSumQp12","Sum 3x3 recHit Charge (ME +1/2); ADC counts",100,0,2000));
173  hRHSumQ.push_back(ibooker.book1D("hRHSumQp13","Sum 3x3 recHit Charge (ME +1/3); ADC counts",100,0,2000));
174  hRHSumQ.push_back(ibooker.book1D("hRHSumQp11a","Sum 3x3 recHit Charge (ME +1/1a); ADC counts",100,0,4000));
175  hRHSumQ.push_back(ibooker.book1D("hRHSumQp21","Sum 3x3 recHit Charge (ME +2/1); ADC counts",100,0,2000));
176  hRHSumQ.push_back(ibooker.book1D("hRHSumQp22","Sum 3x3 recHit Charge (ME +2/2); ADC counts",100,0,2000));
177  hRHSumQ.push_back(ibooker.book1D("hRHSumQp31","Sum 3x3 recHit Charge (ME +3/1); ADC counts",100,0,2000));
178  hRHSumQ.push_back(ibooker.book1D("hRHSumQp32","Sum 3x3 recHit Charge (ME +3/2); ADC counts",100,0,2000));
179  hRHSumQ.push_back(ibooker.book1D("hRHSumQp41","Sum 3x3 recHit Charge (ME +4/1); ADC counts",100,0,2000));
180  hRHSumQ.push_back(ibooker.book1D("hRHSumQp42","Sum 3x3 recHit Charge (ME +4/2); ADC counts",100,0,2000));
181  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm42","Charge Ratio (Ql+Qr)/Qt (ME -4/2); (Ql+Qr)/Qt",100,-0.1,1.1));
182  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm41","Charge Ratio (Ql+Qr)/Qt (ME -4/1); (Ql+Qr)/Qt",100,-0.1,1.1));
183  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm32","Charge Ratio (Ql+Qr)/Qt (ME -3/2); (Ql+Qr)/Qt",100,-0.1,1.1));
184  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm31","Charge Ratio (Ql+Qr)/Qt (ME -3/1); (Ql+Qr)/Qt",100,-0.1,1.1));
185  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm22","Charge Ratio (Ql+Qr)/Qt (ME -2/2); (Ql+Qr)/Qt",100,-0.1,1.1));
186  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm21","Charge Ratio (Ql+Qr)/Qt (ME -2/1); (Ql+Qr)/Qt",100,-0.1,1.1));
187  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm11a","Charge Ratio (Ql+Qr)/Qt (ME -1/1a); (Ql+Qr)/Qt",100,-0.1,1.1));
188  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm13","Charge Ratio (Ql+Qr)/Qt (ME -1/3); (Ql+Qr)/Qt",100,-0.1,1.1));
189  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm12","Charge Ratio (Ql+Qr)/Qt (ME -1/2); (Ql+Qr)/Qt",100,-0.1,1.1));
190  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm11b","Charge Ratio (Ql+Qr)/Qt (ME -1/1b); (Ql+Qr)/Qt",100,-0.1,1.1));
191  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp11b","Charge Ratio (Ql+Qr)/Qt (ME +1/1b); (Ql+Qr)/Qt",100,-0.1,1.1));
192  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp12","Charge Ratio (Ql+Qr)/Qt (ME +1/2); (Ql+Qr)/Qt",100,-0.1,1.1));
193  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp13","Charge Ratio (Ql+Qr)/Qt (ME +1/3); (Ql+Qr)/Qt",100,-0.1,1.1));
194  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp11a","Charge Ratio (Ql+Qr)/Qt (ME +1/1a); (Ql+Qr)/Qt",100,-0.1,1.1));
195  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp21","Charge Ratio (Ql+Qr)/Qt (ME +2/1); (Ql+Qr)/Qt",100,-0.1,1.1));
196  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp22","Charge Ratio (Ql+Qr)/Qt (ME +2/2); (Ql+Qr)/Qt",100,-0.1,1.1));
197  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp31","Charge Ratio (Ql+Qr)/Qt (ME +3/1); (Ql+Qr)/Qt",100,-0.1,1.1));
198  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp32","Charge Ratio (Ql+Qr)/Qt (ME +3/2); (Ql+Qr)/Qt",100,-0.1,1.1));
199  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp41","Charge Ratio (Ql+Qr)/Qt (ME +4/1); (Ql+Qr)/Qt",100,-0.1,1.1));
200  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp42","Charge Ratio (Ql+Qr)/Qt (ME +4/2); (Ql+Qr)/Qt",100,-0.1,1.1));
201  hRHTiming.push_back(ibooker.book1D("hRHTimingm42","recHit Time (ME -4/2); ns",200,-500.,500.));
202  hRHTiming.push_back(ibooker.book1D("hRHTimingm41","recHit Time (ME -4/1); ns",200,-500.,500.));
203  hRHTiming.push_back(ibooker.book1D("hRHTimingm32","recHit Time (ME -3/2); ns",200,-500.,500.));
204  hRHTiming.push_back(ibooker.book1D("hRHTimingm31","recHit Time (ME -3/1); ns",200,-500.,500.));
205  hRHTiming.push_back(ibooker.book1D("hRHTimingm22","recHit Time (ME -2/2); ns",200,-500.,500.));
206  hRHTiming.push_back(ibooker.book1D("hRHTimingm21","recHit Time (ME -2/1); ns",200,-500.,500.));
207  hRHTiming.push_back(ibooker.book1D("hRHTimingm11a","recHit Time (ME -1/1a); ns",200,-500.,500.));
208  hRHTiming.push_back(ibooker.book1D("hRHTimingm13","recHit Time (ME -1/3); ns",200,-500.,500.));
209  hRHTiming.push_back(ibooker.book1D("hRHTimingm12","recHit Time (ME -1/2); ns",200,-500.,500.));
210  hRHTiming.push_back(ibooker.book1D("hRHTimingm11b","recHit Time (ME -1/1b); ns",200,-500.,500.));
211  hRHTiming.push_back(ibooker.book1D("hRHTimingp11b","recHit Time (ME +1/1b); ns",200,-500.,500.));
212  hRHTiming.push_back(ibooker.book1D("hRHTimingp12","recHit Time (ME +1/2); ns",200,-500.,500.));
213  hRHTiming.push_back(ibooker.book1D("hRHTimingp13","recHit Time (ME +1/3); ns",200,-500.,500.));
214  hRHTiming.push_back(ibooker.book1D("hRHTimingp11a","recHit Time (ME +1/1a); ns",200,-500.,500.));
215  hRHTiming.push_back(ibooker.book1D("hRHTimingp21","recHit Time (ME +2/1); ns",200,-500.,500.));
216  hRHTiming.push_back(ibooker.book1D("hRHTimingp22","recHit Time (ME +2/2); ns",200,-500.,500.));
217  hRHTiming.push_back(ibooker.book1D("hRHTimingp31","recHit Time (ME +3/1); ns",200,-500.,500.));
218  hRHTiming.push_back(ibooker.book1D("hRHTimingp32","recHit Time (ME +3/2); ns",200,-500.,500.));
219  hRHTiming.push_back(ibooker.book1D("hRHTimingp41","recHit Time (ME +4/1); ns",200,-500.,500.));
220  hRHTiming.push_back(ibooker.book1D("hRHTimingp42","recHit Time (ME +4/2); ns",200,-500.,500.));
221  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem42","Anode recHit Time (ME -4/2); ns",80,-500.,500.));
222  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem41","Anode recHit Time (ME -4/1); ns",80,-500.,500.));
223  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem32","Anode recHit Time (ME -3/2); ns",80,-500.,500.));
224  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem31","Anode recHit Time (ME -3/1); ns",80,-500.,500.));
225  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem22","Anode recHit Time (ME -2/2); ns",80,-500.,500.));
226  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem21","Anode recHit Time (ME -2/1); ns",80,-500.,500.));
227  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11a","Anode recHit Time (ME -1/1a); ns",80,-500.,500.));
228  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem13","Anode recHit Time (ME -1/3); ns",80,-500.,500.));
229  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem12","Anode recHit Time (ME -1/2); ns",80,-500.,500.));
230  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11b","Anode recHit Time (ME -1/1b); ns",80,-500.,500.));
231  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11b","Anode recHit Time (ME +1/1b); ns",80,-500.,500.));
232  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep12","Anode recHit Time (ME +1/2); ns",80,-500.,500.));
233  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep13","Anode recHit Time (ME +1/3); ns",80,-500.,500.));
234  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11a","Anode recHit Time (ME +1/1a); ns",80,-500.,500.));
235  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep21","Anode recHit Time (ME +2/1); ns",80,-500.,500.));
236  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep22","Anode recHit Time (ME +2/2); ns",80,-500.,500.));
237  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep31","Anode recHit Time (ME +3/1); ns",80,-500.,500.));
238  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep32","Anode recHit Time (ME +3/2); ns",80,-500.,500.));
239  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep41","Anode recHit Time (ME +4/1); ns",80,-500.,500.));
240  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep42","Anode recHit Time (ME +4/2); ns",80,-500.,500.));
241  hRHstpos.push_back(ibooker.book1D("hRHstposm42","Reconstructed Position on Strip (ME -4/2); Strip Widths",120,-0.6,0.6));
242  hRHstpos.push_back(ibooker.book1D("hRHstposm41","Reconstructed Position on Strip (ME -4/1); Strip Widths",120,-0.6,0.6));
243  hRHstpos.push_back(ibooker.book1D("hRHstposm32","Reconstructed Position on Strip (ME -3/2); Strip Widths",120,-0.6,0.6));
244  hRHstpos.push_back(ibooker.book1D("hRHstposm31","Reconstructed Position on Strip (ME -3/1); Strip Widths",120,-0.6,0.6));
245  hRHstpos.push_back(ibooker.book1D("hRHstposm22","Reconstructed Position on Strip (ME -2/2); Strip Widths",120,-0.6,0.6));
246  hRHstpos.push_back(ibooker.book1D("hRHstposm21","Reconstructed Position on Strip (ME -2/1); Strip Widths",120,-0.6,0.6));
247  hRHstpos.push_back(ibooker.book1D("hRHstposm11a","Reconstructed Position on Strip (ME -1/1a); Strip Widths",120,-0.6,0.6));
248  hRHstpos.push_back(ibooker.book1D("hRHstposm13","Reconstructed Position on Strip (ME -1/3); Strip Widths",120,-0.6,0.6));
249  hRHstpos.push_back(ibooker.book1D("hRHstposm12","Reconstructed Position on Strip (ME -1/2); Strip Widths",120,-0.6,0.6));
250  hRHstpos.push_back(ibooker.book1D("hRHstposm11b","Reconstructed Position on Strip (ME -1/1b); Strip Widths",120,-0.6,0.6));
251  hRHstpos.push_back(ibooker.book1D("hRHstposp11b","Reconstructed Position on Strip (ME +1/1b); Strip Widths",120,-0.6,0.6));
252  hRHstpos.push_back(ibooker.book1D("hRHstposp12","Reconstructed Position on Strip (ME +1/2); Strip Widths",120,-0.6,0.6));
253  hRHstpos.push_back(ibooker.book1D("hRHstposp13","Reconstructed Position on Strip (ME +1/3); Strip Widths",120,-0.6,0.6));
254  hRHstpos.push_back(ibooker.book1D("hRHstposp11a","Reconstructed Position on Strip (ME +1/1a); Strip Widths",120,-0.6,0.6));
255  hRHstpos.push_back(ibooker.book1D("hRHstposp21","Reconstructed Position on Strip (ME +2/1); Strip Widths",120,-0.6,0.6));
256  hRHstpos.push_back(ibooker.book1D("hRHstposp22","Reconstructed Position on Strip (ME +2/2); Strip Widths",120,-0.6,0.6));
257  hRHstpos.push_back(ibooker.book1D("hRHstposp31","Reconstructed Position on Strip (ME +3/1); Strip Widths",120,-0.6,0.6));
258  hRHstpos.push_back(ibooker.book1D("hRHstposp32","Reconstructed Position on Strip (ME +3/2); Strip Widths",120,-0.6,0.6));
259  hRHstpos.push_back(ibooker.book1D("hRHstposp41","Reconstructed Position on Strip (ME +4/1); Strip Widths",120,-0.6,0.6));
260  hRHstpos.push_back(ibooker.book1D("hRHstposp42","Reconstructed Position on Strip (ME +4/2); Strip Widths",120,-0.6,0.6));
261  hRHsterr.push_back(ibooker.book1D("hRHsterrm42","Estimated Error on Strip Measurement (ME -4/2); Strip Widths",75,-0.01,0.24));
262  hRHsterr.push_back(ibooker.book1D("hRHsterrm41","Estimated Error on Strip Measurement (ME -4/1); Strip Widths",75,-0.01,0.24));
263  hRHsterr.push_back(ibooker.book1D("hRHsterrm32","Estimated Error on Strip Measurement (ME -3/2); Strip Widths",75,-0.01,0.24));
264  hRHsterr.push_back(ibooker.book1D("hRHsterrm31","Estimated Error on Strip Measurement (ME -3/1); Strip Widths",75,-0.01,0.24));
265  hRHsterr.push_back(ibooker.book1D("hRHsterrm22","Estimated Error on Strip Measurement (ME -2/2); Strip Widths",75,-0.01,0.24));
266  hRHsterr.push_back(ibooker.book1D("hRHsterrm21","Estimated Error on Strip Measurement (ME -2/1); Strip Widths",75,-0.01,0.24));
267  hRHsterr.push_back(ibooker.book1D("hRHsterrm11a","Estimated Error on Strip Measurement (ME -1/1a); Strip Widths",75,-0.01,0.24));
268  hRHsterr.push_back(ibooker.book1D("hRHsterrm13","Estimated Error on Strip Measurement (ME -1/3); Strip Widths",75,-0.01,0.24));
269  hRHsterr.push_back(ibooker.book1D("hRHsterrm12","Estimated Error on Strip Measurement (ME -1/2); Strip Widths",75,-0.01,0.24));
270  hRHsterr.push_back(ibooker.book1D("hRHsterrm11b","Estimated Error on Strip Measurement (ME -1/1b); Strip Widths",75,-0.01,0.24));
271  hRHsterr.push_back(ibooker.book1D("hRHsterrp11b","Estimated Error on Strip Measurement (ME +1/1b); Strip Widths",75,-0.01,0.24));
272  hRHsterr.push_back(ibooker.book1D("hRHsterrp12","Estimated Error on Strip Measurement (ME +1/2); Strip Widths",75,-0.01,0.24));
273  hRHsterr.push_back(ibooker.book1D("hRHsterrp13","Estimated Error on Strip Measurement (ME +1/3); Strip Widths",75,-0.01,0.24));
274  hRHsterr.push_back(ibooker.book1D("hRHsterrp11a","Estimated Error on Strip Measurement (ME +1/1a); Strip Widths",75,-0.01,0.24));
275  hRHsterr.push_back(ibooker.book1D("hRHsterrp21","Estimated Error on Strip Measurement (ME +2/1); Strip Widths",75,-0.01,0.24));
276  hRHsterr.push_back(ibooker.book1D("hRHsterrp22","Estimated Error on Strip Measurement (ME +2/2); Strip Widths",75,-0.01,0.24));
277  hRHsterr.push_back(ibooker.book1D("hRHsterrp31","Estimated Error on Strip Measurement (ME +3/1); Strip Widths",75,-0.01,0.24));
278  hRHsterr.push_back(ibooker.book1D("hRHsterrp32","Estimated Error on Strip Measurement (ME +3/2); Strip Widths",75,-0.01,0.24));
279  hRHsterr.push_back(ibooker.book1D("hRHsterrp41","Estimated Error on Strip Measurement (ME +4/1); Strip Widths",75,-0.01,0.24));
280  hRHsterr.push_back(ibooker.book1D("hRHsterrp42","Estimated Error on Strip Measurement (ME +4/2); Strip Widths",75,-0.01,0.24));
281 
282  // segments
283  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Segments");
284 
285  hSnSegments = ibooker.book1D("hSnSegments","Number of Segments per Event; # of Segments",26,-0.5,25.5);
286  hSnhitsAll = ibooker.book1D("hSnhits","N hits on Segments; # of hits",8,-0.5,7.5);
287  hSnhits.push_back(ibooker.book1D("hSnhitsm42","# of hits on Segments (ME -4/2); # of hits",8,-0.5,7.5));
288  hSnhits.push_back(ibooker.book1D("hSnhitsm41","# of hits on Segments (ME -4/1); # of hits",8,-0.5,7.5));
289  hSnhits.push_back(ibooker.book1D("hSnhitsm32","# of hits on Segments (ME -3/2); # of hits",8,-0.5,7.5));
290  hSnhits.push_back(ibooker.book1D("hSnhitsm31","# of hits on Segments (ME -3/1); # of hits",8,-0.5,7.5));
291  hSnhits.push_back(ibooker.book1D("hSnhitsm22","# of hits on Segments (ME -2/2); # of hits",8,-0.5,7.5));
292  hSnhits.push_back(ibooker.book1D("hSnhitsm21","# of hits on Segments (ME -2/1); # of hits",8,-0.5,7.5));
293  hSnhits.push_back(ibooker.book1D("hSnhitsm11a","# of hits on Segments (ME -1/1a); # of hits",8,-0.5,7.5));
294  hSnhits.push_back(ibooker.book1D("hSnhitsm13","# of hits on Segments (ME -1/3); # of hits",8,-0.5,7.5));
295  hSnhits.push_back(ibooker.book1D("hSnhitsm12","# of hits on Segments (ME -1/2); # of hits",8,-0.5,7.5));
296  hSnhits.push_back(ibooker.book1D("hSnhitsm11b","# of hits on Segments (ME -1/1b); # of hits",8,-0.5,7.5));
297  hSnhits.push_back(ibooker.book1D("hSnhitsp11b","# of hits on Segments (ME +1/1b); # of hits",8,-0.5,7.5));
298  hSnhits.push_back(ibooker.book1D("hSnhitsp12","# of hits on Segments (ME +1/2); # of hits",8,-0.5,7.5));
299  hSnhits.push_back(ibooker.book1D("hSnhitsp13","# of hits on Segments (ME +1/3); # of hits",8,-0.5,7.5));
300  hSnhits.push_back(ibooker.book1D("hSnhitsp11a","# of hits on Segments (ME +1/1a); # of hits",8,-0.5,7.5));
301  hSnhits.push_back(ibooker.book1D("hSnhitsp21","# of hits on Segments (ME +2/1); # of hits",8,-0.5,7.5));
302  hSnhits.push_back(ibooker.book1D("hSnhitsp22","# of hits on Segments (ME +2/2); # of hits",8,-0.5,7.5));
303  hSnhits.push_back(ibooker.book1D("hSnhitsp31","# of hits on Segments (ME +3/1); # of hits",8,-0.5,7.5));
304  hSnhits.push_back(ibooker.book1D("hSnhitsp32","# of hits on Segments (ME +3/2); # of hits",8,-0.5,7.5));
305  hSnhits.push_back(ibooker.book1D("hSnhitsp41","# of hits on Segments (ME +4/1); # of hits",8,-0.5,7.5));
306  hSnhits.push_back(ibooker.book1D("hSnhitsp42","# of hits on Segments (ME +4/2); # of hits",8,-0.5,7.5));
307  hSChiSqAll = ibooker.book1D("hSChiSq","Segment Normalized Chi2; Chi2/ndof",110,-0.05,10.5);
308  hSChiSq.push_back(ibooker.book1D("hSChiSqm42","Segment Normalized Chi2 (ME -4/2); Chi2/ndof",110,-0.05,10.5));
309  hSChiSq.push_back(ibooker.book1D("hSChiSqm41","Segment Normalized Chi2 (ME -4/1); Chi2/ndof",110,-0.05,10.5));
310  hSChiSq.push_back(ibooker.book1D("hSChiSqm32","Segment Normalized Chi2 (ME -3/2); Chi2/ndof",110,-0.05,10.5));
311  hSChiSq.push_back(ibooker.book1D("hSChiSqm31","Segment Normalized Chi2 (ME -3/1); Chi2/ndof",110,-0.05,10.5));
312  hSChiSq.push_back(ibooker.book1D("hSChiSqm22","Segment Normalized Chi2 (ME -2/2); Chi2/ndof",110,-0.05,10.5));
313  hSChiSq.push_back(ibooker.book1D("hSChiSqm21","Segment Normalized Chi2 (ME -2/1); Chi2/ndof",110,-0.05,10.5));
314  hSChiSq.push_back(ibooker.book1D("hSChiSqm11a","Segment Normalized Chi2 (ME -1/1a); Chi2/ndof",110,-0.05,10.5));
315  hSChiSq.push_back(ibooker.book1D("hSChiSqm13","Segment Normalized Chi2 (ME -1/3); Chi2/ndof",110,-0.05,10.5));
316  hSChiSq.push_back(ibooker.book1D("hSChiSqm12","Segment Normalized Chi2 (ME -1/2); Chi2/ndof",110,-0.05,10.5));
317  hSChiSq.push_back(ibooker.book1D("hSChiSqm11b","Segment Normalized Chi2 (ME -1/1b); Chi2/ndof",110,-0.05,10.5));
318  hSChiSq.push_back(ibooker.book1D("hSChiSqp11b","Segment Normalized Chi2 (ME +1/1b); Chi2/ndof",110,-0.05,10.5));
319  hSChiSq.push_back(ibooker.book1D("hSChiSqp12","Segment Normalized Chi2 (ME +1/2); Chi2/ndof",110,-0.05,10.5));
320  hSChiSq.push_back(ibooker.book1D("hSChiSqp13","Segment Normalized Chi2 (ME +1/3); Chi2/ndof",110,-0.05,10.5));
321  hSChiSq.push_back(ibooker.book1D("hSChiSqp11a","Segment Normalized Chi2 (ME +1/1a); Chi2/ndof",110,-0.05,10.5));
322  hSChiSq.push_back(ibooker.book1D("hSChiSqp21","Segment Normalized Chi2 (ME +2/1); Chi2/ndof",110,-0.05,10.5));
323  hSChiSq.push_back(ibooker.book1D("hSChiSqp22","Segment Normalized Chi2 (ME +2/2); Chi2/ndof",110,-0.05,10.5));
324  hSChiSq.push_back(ibooker.book1D("hSChiSqp31","Segment Normalized Chi2 (ME +3/1); Chi2/ndof",110,-0.05,10.5));
325  hSChiSq.push_back(ibooker.book1D("hSChiSqp32","Segment Normalized Chi2 (ME +3/2); Chi2/ndof",110,-0.05,10.5));
326  hSChiSq.push_back(ibooker.book1D("hSChiSqp41","Segment Normalized Chi2 (ME +4/1); Chi2/ndof",110,-0.05,10.5));
327  hSChiSq.push_back(ibooker.book1D("hSChiSqp42","Segment Normalized Chi2 (ME +4/2); Chi2/ndof",110,-0.05,10.5));
328  hSChiSqProbAll = ibooker.book1D("hSChiSqProb","Segment chi2 Probability; Probability",110,-0.05,1.05);
329  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm42","Segment chi2 Probability (ME -4/2); Probability",110,-0.05,1.05));
330  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm41","Segment chi2 Probability (ME -4/1); Probability",110,-0.05,1.05));
331  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm32","Segment chi2 Probability (ME -3/2); Probability",110,-0.05,1.05));
332  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm31","Segment chi2 Probability (ME -3/1); Probability",110,-0.05,1.05));
333  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm22","Segment chi2 Probability (ME -2/2); Probability",110,-0.05,1.05));
334  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm21","Segment chi2 Probability (ME -2/1); Probability",110,-0.05,1.05));
335  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm11a","Segment chi2 Probability (ME -1/1a); Probability",110,-0.05,1.05));
336  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm13","Segment chi2 Probability (ME -1/3); Probability",110,-0.05,1.05));
337  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm12","Segment chi2 Probability (ME -1/2); Probability",110,-0.05,1.05));
338  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm11b","Segment chi2 Probability (ME -1/1b); Probability",110,-0.05,1.05));
339  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp11b","Segment chi2 Probability (ME +1/1b); Probability",110,-0.05,1.05));
340  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp12","Segment chi2 Probability (ME +1/2); Probability",110,-0.05,1.05));
341  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp13","Segment chi2 Probability (ME +1/3); Probability",110,-0.05,1.05));
342  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp11a","Segment chi2 Probability (ME +1/1a); Probability",110,-0.05,1.05));
343  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp21","Segment chi2 Probability (ME +2/1); Probability",110,-0.05,1.05));
344  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp22","Segment chi2 Probability (ME +2/2); Probability",110,-0.05,1.05));
345  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp31","Segment chi2 Probability (ME +3/1); Probability",110,-0.05,1.05));
346  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp32","Segment chi2 Probability (ME +3/2); Probability",110,-0.05,1.05));
347  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp41","Segment chi2 Probability (ME +4/1); Probability",110,-0.05,1.05));
348  hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp42","Segment chi2 Probability (ME +4/2); Probability",110,-0.05,1.05));
349  hSGlobalTheta = ibooker.book1D("hSGlobalTheta","Segment Direction (Global Theta); Global Theta (radians)",136,-0.1,3.3);
350  hSGlobalPhi = ibooker.book1D("hSGlobalPhi","Segment Direction (Global Phi); Global Phi (radians)", 128,-3.2,3.2);
351 
352  hSTimeDiff = ibooker.book1D("hSTimeDiff", "Anode Minus Cathode Segment Time [ns]",50,-50,50);
353  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m42", "Anode Minus Cathode Segment Time (ME -4/2) [ns]",50,-50,50));
354  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m41", "Anode Minus Cathode Segment Time (ME -4/1) [ns]",50,-50,50));
355  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m32", "Anode Minus Cathode Segment Time (ME -3/2) [ns]",50,-50,50));
356  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m31", "Anode Minus Cathode Segment Time (ME -3/2) [ns]",50,-50,50));
357  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m22", "Anode Minus Cathode Segment Time (ME -2/2) [ns]",50,-50,50));
358  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m21", "Anode Minus Cathode Segment Time (ME -2/1) [ns]",50,-50,50));
359  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m11a", "Anode Minus Cathode Segment Time (ME -1/1a) [ns]",50,-50,50));
360  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m13", "Anode Minus Cathode Segment Time (ME -1/3) [ns]",50,-50,50));
361  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m12", "Anode Minus Cathode Segment Time (ME -1/2) [ns]",50,-50,50));
362  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m11b", "Anode Minus Cathode Segment Time (ME -1/1b) [ns]",50,-50,50));
363  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p11b", "Anode Minus Cathode Segment Time (ME +1/1b) [ns]",50,-50,50));
364  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p12", "Anode Minus Cathode Segment Time (ME +1/2) [ns]",50,-50,50));
365  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p13", "Anode Minus Cathode Segment Time (ME +1/3) [ns]",50,-50,50));
366  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p11a", "Anode Minus Cathode Segment Time (ME +1/1a) [ns]",50,-50,50));
367  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p21", "Anode Minus Cathode Segment Time (ME +2/1) [ns]",50,-50,50));
368  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p22", "Anode Minus Cathode Segment Time (ME +2/2) [ns]",50,-50,50));
369  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p31", "Anode Minus Cathode Segment Time (ME +3/1) [ns]",50,-50,50));
370  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p32", "Anode Minus Cathode Segment Time (ME +3/2) [ns]",50,-50,50));
371  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p41", "Anode Minus Cathode Segment Time (ME +4/1) [ns]",50,-50,50));
372  hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p42", "Anode Minus Cathode Segment Time (ME +4/2) [ns]",50,-50,50));
373 
374  hSTimeAnode = ibooker.book1D("hSTimeAnode", "Anode Only Segment Time [ns]",200,-200,200);
375  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m42", "Anode Only Segment Time (ME -4/2) [ns]",200,-200,200));
376  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m41", "Anode Only Segment Time (ME -4/1) [ns]",200,-200,200));
377  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m32", "Anode Only Segment Time (ME -3/2) [ns]",200,-200,200));
378  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m31", "Anode Only Segment Time (ME -3/2) [ns]",200,-200,200));
379  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m22", "Anode Only Segment Time (ME -2/2) [ns]",200,-200,200));
380  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m21", "Anode Only Segment Time (ME -2/1) [ns]",200,-200,200));
381  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m11a", "Anode Only Segment Time (ME -1/1a) [ns]",200,-200,200));
382  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m13", "Anode Only Segment Time (ME -1/3) [ns]",200,-200,200));
383  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m12", "Anode Only Segment Time (ME -1/2) [ns]",200,-200,200));
384  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m11b", "Anode Only Segment Time (ME -1/1b) [ns]",200,-200,200));
385  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p11b", "Anode Only Segment Time (ME +1/1b) [ns]",200,-200,200));
386  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p12", "Anode Only Segment Time (ME +1/2) [ns]",200,-200,200));
387  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p13", "Anode Only Segment Time (ME +1/3) [ns]",200,-200,200));
388  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p11a", "Anode Only Segment Time (ME +1/1a) [ns]",200,-200,200));
389  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p21", "Anode Only Segment Time (ME +2/1) [ns]",200,-200,200));
390  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p22", "Anode Only Segment Time (ME +2/2) [ns]",200,-200,200));
391  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p31", "Anode Only Segment Time (ME +3/1) [ns]",200,-200,200));
392  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p32", "Anode Only Segment Time (ME +3/2) [ns]",200,-200,200));
393  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p41", "Anode Only Segment Time (ME +4/1) [ns]",200,-200,200));
394  hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p42", "Anode Only Segment Time (ME +4/2) [ns]",200,-200,200));
395 
396  hSTimeCathode = ibooker.book1D("hSTimeCathode", "Cathode Only Segment Time [ns]",200,-200,200);
397  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m42", "Cathode Only Segment Time (ME -4/2) [ns]",200,-200,200));
398  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m41", "Cathode Only Segment Time (ME -4/1) [ns]",200,-200,200));
399  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m32", "Cathode Only Segment Time (ME -3/2) [ns]",200,-200,200));
400  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m31", "Cathode Only Segment Time (ME -3/2) [ns]",200,-200,200));
401  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m22", "Cathode Only Segment Time (ME -2/2) [ns]",200,-200,200));
402  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m21", "Cathode Only Segment Time (ME -2/1) [ns]",200,-200,200));
403  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m11a", "Cathode Only Segment Time (ME -1/1a) [ns]",200,-200,200));
404  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m13", "Cathode Only Segment Time (ME -1/3) [ns]",200,-200,200));
405  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m12", "Cathode Only Segment Time (ME -1/2) [ns]",200,-200,200));
406  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m11b", "Cathode Only Segment Time (ME -1/1b) [ns]",200,-200,200));
407  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p11b", "Cathode Only Segment Time (ME +1/1b) [ns]",200,-200,200));
408  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p12", "Cathode Only Segment Time (ME +1/2) [ns]",200,-200,200));
409  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p13", "Cathode Only Segment Time (ME +1/3) [ns]",200,-200,200));
410  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p11a", "Cathode Only Segment Time (ME +1/1a) [ns]",200,-200,200));
411  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p21", "Cathode Only Segment Time (ME +2/1) [ns]",200,-200,200));
412  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p22", "Cathode Only Segment Time (ME +2/2) [ns]",200,-200,200));
413  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p31", "Cathode Only Segment Time (ME +3/1) [ns]",200,-200,200));
414  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p32", "Cathode Only Segment Time (ME +3/2) [ns]",200,-200,200));
415  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p41", "Cathode Only Segment Time (ME +4/1) [ns]",200,-200,200));
416  hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p42", "Cathode Only Segment Time (ME +4/2) [ns]",200,-200,200));
417 
418  hSTimeCombined = ibooker.book1D("hSTimeCombined", "Segment Time (anode+cathode times) [ns]",200,-200,200);
419  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m42", "Segment Time (anode+cathode times) Segment Time (ME -4/2) [ns]",200,-200,200));
420  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m41", "Segment Time (anode+cathode times) Segment Time (ME -4/1) [ns]",200,-200,200));
421  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m32", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]",200,-200,200));
422  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m31", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]",200,-200,200));
423  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m22", "Segment Time (anode+cathode times) Segment Time (ME -2/2) [ns]",200,-200,200));
424  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m21", "Segment Time (anode+cathode times) Segment Time (ME -2/1) [ns]",200,-200,200));
425  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m11a", "Segment Time (anode+cathode times) Segment Time (ME -1/1a) [ns]",200,-200,200));
426  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m13", "Segment Time (anode+cathode times) Segment Time (ME -1/3) [ns]",200,-200,200));
427  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m12", "Segment Time (anode+cathode times) Segment Time (ME -1/2) [ns]",200,-200,200));
428  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m11b", "Segment Time (anode+cathode times) Segment Time (ME -1/1b) [ns]",200,-200,200));
429  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p11b", "Segment Time (anode+cathode times) Segment Time (ME +1/1b) [ns]",200,-200,200));
430  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p12", "Segment Time (anode+cathode times) Segment Time (ME +1/2) [ns]",200,-200,200));
431  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p13", "Segment Time (anode+cathode times) Segment Time (ME +1/3) [ns]",200,-200,200));
432  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p11a", "Segment Time (anode+cathode times) Segment Time (ME +1/1a) [ns]",200,-200,200));
433  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p21", "Segment Time (anode+cathode times) Segment Time (ME +2/1) [ns]",200,-200,200));
434  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p22", "Segment Time (anode+cathode times) Segment Time (ME +2/2) [ns]",200,-200,200));
435  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p31", "Segment Time (anode+cathode times) Segment Time (ME +3/1) [ns]",200,-200,200));
436  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p32", "Segment Time (anode+cathode times) Segment Time (ME +3/2) [ns]",200,-200,200));
437  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p41", "Segment Time (anode+cathode times) Segment Time (ME +4/1) [ns]",200,-200,200));
438  hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p42", "Segment Time (anode+cathode times) Segment Time (ME +4/2) [ns]",200,-200,200));
439 
440  hSTimeDiffSerial = ibooker.book2D("hSTimeDiffSerial", "Anode Minus Cathode Segment Time [ns]",601,-0.5,600.5,200,-50,50);
441  hSTimeAnodeSerial = ibooker.book2D("hSTimeAnodeSerial", "Anode Only Segment Time [ns]",601,-0.5,600.5,200,-200,200);
442  hSTimeCathodeSerial = ibooker.book2D("hSTimeCathodeSerial", "Cathode Only Segment Time [ns]",601,-0.5,600.5,200,-200,200);
443  hSTimeCombinedSerial = ibooker.book2D("hSTimeCombinedSerial", "Segment Time (anode+cathode times) [ns]",601,-0.5,600.5,200,-200,200);
444 
445 
446  hSTimeVsZ = ibooker.book2D("hSTimeVsZ","Segment Time vs. Z; [ns] vs. [cm]",200,-1200,1200,200,-200,200);
447  hSTimeVsTOF = ibooker.book2D("hSTimeVsTOF","Segment Time vs. Distance from IP; [ns] vs. [cm]",180,500,1400, 200,-200,200);
448 
449 
450  // resolution
451  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Resolution");
452 
453  hSResid.push_back(ibooker.book1D("hSResidm42","Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/2); Strip Widths",100,-0.5,0.5));
454  hSResid.push_back(ibooker.book1D("hSResidm41","Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/1); Strip Widths",100,-0.5,0.5));
455  hSResid.push_back(ibooker.book1D("hSResidm32","Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/2); Strip Widths",100,-0.5,0.5));
456  hSResid.push_back(ibooker.book1D("hSResidm31","Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/1); Strip Widths",100,-0.5,0.5));
457  hSResid.push_back(ibooker.book1D("hSResidm22","Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/2); Strip Widths",100,-0.5,0.5));
458  hSResid.push_back(ibooker.book1D("hSResidm21","Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/1); Strip Widths",100,-0.5,0.5));
459  hSResid.push_back(ibooker.book1D("hSResidm11a","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1a); Strip Widths",100,-0.5,0.5));
460  hSResid.push_back(ibooker.book1D("hSResidm13","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/3); Strip Widths",100,-0.5,0.5));
461  hSResid.push_back(ibooker.book1D("hSResidm12","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/2); Strip Widths",100,-0.5,0.5));
462  hSResid.push_back(ibooker.book1D("hSResidm11b","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1b); Strip Widths",100,-0.5,0.5));
463  hSResid.push_back(ibooker.book1D("hSResidp11b","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1b); Strip Widths",100,-0.5,0.5));
464  hSResid.push_back(ibooker.book1D("hSResidp12","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/2); Strip Widths",100,-0.5,0.5));
465  hSResid.push_back(ibooker.book1D("hSResidp13","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/3); Strip Widths",100,-0.5,0.5));
466  hSResid.push_back(ibooker.book1D("hSResidp11a","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1a); Strip Widths",100,-0.5,0.5));
467  hSResid.push_back(ibooker.book1D("hSResidp21","Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/1); Strip Widths",100,-0.5,0.5));
468  hSResid.push_back(ibooker.book1D("hSResidp22","Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/2); Strip Widths",100,-0.5,0.5));
469  hSResid.push_back(ibooker.book1D("hSResidp31","Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/1); Strip Widths",100,-0.5,0.5));
470  hSResid.push_back(ibooker.book1D("hSResidp32","Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/2); Strip Widths",100,-0.5,0.5));
471  hSResid.push_back(ibooker.book1D("hSResidp41","Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/1); Strip Widths",100,-0.5,0.5));
472  hSResid.push_back(ibooker.book1D("hSResidp42","Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/2); Strip Widths",100,-0.5,0.5));
473 
474  // efficiency
475  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Efficiency");
476 
477  // hSSTE = ibooker.book1D("hSSTE","hSSTE",40,0.5,40.5);
478  // hRHSTE = ibooker.book1D("hRHSTE","hRHSTE",40,0.5,40.5);
479  hSnum = ibooker.book1D("hSnum", "CSC w rechits in 2+ layers && segment(s)", 20, 0.5, 20.5);
480  hSden = ibooker.book1D("hSden", "CSC w rechits in 2+ layers", 20, 0.5, 20.5);
481  hRHnum = ibooker.book1D("hRHnum", "CSC w segment(s) && rechits in 6 layers", 20, 0.5, 20.5);
482  hRHden = ibooker.book1D("hRHden", "CSC w segment(s)", 20, 0.5, 20.5);
483  applyCSClabels(hSnum, EXTENDED, X);
484  applyCSClabels(hSden, EXTENDED, X);
485  applyCSClabels(hRHnum, EXTENDED, X);
486  applyCSClabels(hRHden, EXTENDED, X);
487 
488  // hSEff = ibooker.book1D("hSEff","Segment Efficiency",20,0.5,20.5);
489  // hRHEff = ibooker.book1D("hRHEff","recHit Efficiency",20,0.5,20.5);
490  hSSTE2 = ibooker.book2D("hSSTE2","hSSTE2",36,0.5,36.5, 20, 0.5, 20.5);
491  hRHSTE2 = ibooker.book2D("hRHSTE2","hRHSTE2",36,0.5,36.5, 20, 0.5, 20.5);
492  hStripSTE2 = ibooker.book2D("hStripSTE2","hStripSTE2",36,0.5,36.5, 20, 0.5, 20.5);
493  hWireSTE2 = ibooker.book2D("hWireSTE2","hWireSTE2",36,0.5,36.5, 20, 0.5, 20.5);
494  hEffDenominator = ibooker.book2D("hEffDenominator","hEffDenominator",36,0.5,36.5, 20, 0.5, 20.5);
495  // hSEff2 = ibooker.book2D("hSEff2","Segment Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
496  // hRHEff2 = ibooker.book2D("hRHEff2","recHit Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
497  // hStripReadoutEff2 = ibooker.book2D("hStripReadoutEff2","strip readout ratio [(strip+clct+wires)/(clct+wires)] 2D",36,0.5,36.5, 20, 0.5, 20.5);
498  // hStripReadoutEff2->setAxisTitle("Chamber #");
499  // hStripEff2 = ibooker.book2D("hStripEff2","strip Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
500  // hWireEff2 = ibooker.book2D("hWireEff2","wire Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
501  hSensitiveAreaEvt = ibooker.book2D("hSensitiveAreaEvt","Events Passing Selection for Efficiency",36,0.5,36.5, 20, 0.5, 20.5);
502 
503  // bx monitor for trigger synchronization
504  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/BXMonitor");
505 
506  hALCTgetBX = ibooker.book1D("hALCTgetBX","ALCT position in ALCT-L1A match window [BX]",7,-0.5,6.5);
507  // hALCTgetBXChamberMeans = ibooker.book1D("hALCTgetBXChamberMeans","Chamber Mean ALCT position in ALCT-L1A match window [BX]",60,0,6);
508  hALCTgetBXSerial = ibooker.book2D("hALCTgetBXSerial","ALCT position in ALCT-L1A match window [BX]",601,-0.5,600.5,7,-0.5,6.5);
509  hALCTgetBXSerial->setAxisTitle("Chamber Serial Number");
510  hALCTgetBX2DNumerator = ibooker.book2D("hALCTgetBX2DNumerator","ALCT position in ALCT-L1A match window [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
511  // hALCTgetBX2DMeans = ibooker.book2D("hALCTgetBX2DMeans","ALCT position in ALCT-L1A match window [BX]",36,0.5,36.5,20,0.5,20.5);
512  hALCTgetBX2Denominator = ibooker.book2D("hALCTgetBX2Denominator","Number of ALCT Digis checked",36,0.5,36.5,20,0.5,20.5);
513  // hALCTgetBX2DMeans->setAxisTitle("Chamber #");
514  hALCTgetBX2Denominator->setAxisTitle("Chamber #");
515  hALCTMatch = ibooker.book1D("hALCTMatch","ALCT position in ALCT-CLCT match window [BX]",7,-0.5,6.5);
516  // hALCTMatchChamberMeans = ibooker.book1D("hALCTMatchChamberMeans","Chamber Mean ALCT position in ALCT-CLCT match window [BX]",60,0,6);
517  hALCTMatchSerial = ibooker.book2D("hALCTMatchSerial","ALCT position in ALCT-CLCT match window [BX]",601,-0.5,600.5,7,-0.5,6.5);
518  hALCTMatchSerial->setAxisTitle("Chamber Serial Number");
519  hALCTMatch2DNumerator = ibooker.book2D("hALCTMatch2DNumerator","ALCT position in ALCT-CLCT match window [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
520  // hALCTMatch2DMeans = ibooker.book2D("hALCTMatch2DMeans","ALCT position in ALCT-CLCT match window [BX]",36,0.5,36.5,20,0.5,20.5);
521  hALCTMatch2Denominator = ibooker.book2D("hALCTMatch2Denominator","Number of ALCT-CLCT matches checked",36,0.5,36.5,20,0.5,20.5);
522  // hALCTMatch2DMeans->setAxisTitle("Chamber #");
523  hALCTMatch2Denominator->setAxisTitle("Chamber #");
524  hCLCTL1A = ibooker.book1D("hCLCTL1A","L1A - CLCTpreTrigger at TMB [BX]",40,149.5,189.5);
525  // hCLCTL1AChamberMeans = ibooker.book1D("hCLCTL1AChamberMeans","Chamber Mean L1A - CLCTpreTrigger at TMB [BX]",90,150,159);
526  hCLCTL1ASerial = ibooker.book2D("hCLCTL1ASerial","L1A - CLCTpreTrigger at TMB [BX]",601,-0.5,600.5,40,149.5,189.5);
527  hCLCTL1ASerial->setAxisTitle("Chamber Serial Number");
528  hCLCTL1A2DNumerator = ibooker.book2D("hCLCTL1A2DNumerator","L1A - CLCTpreTrigger at TMB [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
529  // hCLCTL1A2DMeans = ibooker.book2D("hCLCTL1A2DMeans","L1A - CLCTpreTrigger at TMB [BX]",36,0.5,36.5,20,0.5,20.5);
530  hCLCTL1A2Denominator = ibooker.book2D("hCLCTL1A2Denominator","Number of TMB CLCTs checked",36,0.5,36.5,20,0.5,20.5);
531 
532 
533  // labels
534  applyCSClabels(hOWiresAndCLCT, EXTENDED, Y);
535  applyCSClabels(hOWires, EXTENDED, Y);
536  applyCSClabels(hOStrips, EXTENDED, Y);
537  applyCSClabels(hOStripsAndWiresAndCLCT, EXTENDED, Y);
538  applyCSClabels(hORecHits, EXTENDED, Y);
539  applyCSClabels(hOSegments, EXTENDED, Y);
540  // applyCSClabels(hSEff, EXTENDED, X);
541  // applyCSClabels(hRHEff, EXTENDED, X);
542  // applyCSClabels(hSEff2, SMALL, Y);
543  applyCSClabels(hSSTE2, EXTENDED, Y);
544  applyCSClabels(hEffDenominator, EXTENDED, Y);
545  // applyCSClabels(hRHEff2, SMALL, Y);
546  applyCSClabels(hRHSTE2, EXTENDED, Y);
547  // applyCSClabels(hStripReadoutEff2, EXTENDED, Y);
548  // applyCSClabels(hStripEff2, SMALL, Y);
549  applyCSClabels(hStripSTE2, EXTENDED, Y);
550  // applyCSClabels(hWireEff2, SMALL, Y);
551  applyCSClabels(hWireSTE2, EXTENDED, Y);
552  applyCSClabels(hSensitiveAreaEvt, EXTENDED, Y);
553  // applyCSClabels(hALCTgetBX2DMeans, EXTENDED, Y);
554  applyCSClabels(hALCTgetBX2Denominator, EXTENDED, Y);
555  // applyCSClabels(hALCTMatch2DMeans, EXTENDED, Y);
556  applyCSClabels(hALCTMatch2Denominator, EXTENDED, Y);
557  // applyCSClabels(hCLCTL1A2DMeans, EXTENDED, Y);
558  applyCSClabels(hCLCTL1A2Denominator,EXTENDED, Y);
559 }
560 
562 // Analysis //
564 void CSCOfflineMonitor::analyze(const edm::Event & event, const edm::EventSetup& eventSetup){
565 
566  edm::Handle<CSCWireDigiCollection> wires;
567  edm::Handle<CSCStripDigiCollection> strips;
568  edm::Handle<CSCALCTDigiCollection> alcts;
569  edm::Handle<CSCCLCTDigiCollection> clcts;
570  event.getByToken( sd_token, strips );
571  event.getByToken( wd_token, wires );
572  event.getByToken( al_token, alcts );
573  event.getByToken( cl_token, clcts );
574 
575  // Get the CSC Geometry :
576  edm::ESHandle<CSCGeometry> cscGeom;
577  eventSetup.get<MuonGeometryRecord>().get(cscGeom);
578 
579  // Get the RecHits collection :
580  edm::Handle<CSCRecHit2DCollection> recHits;
581  event.getByToken( rh_token, recHits );
582 
583  // get CSC segment collection
584  edm::Handle<CSCSegmentCollection> cscSegments;
585  event.getByToken( se_token, cscSegments );
586 
587  doOccupancies(strips,wires,recHits,cscSegments,clcts);
588  doStripDigis(strips);
589  doWireDigis(wires);
590  doRecHits(recHits,strips,cscGeom);
591  doSegments(cscSegments,cscGeom);
592  doResolution(cscSegments,cscGeom);
593  doPedestalNoise(strips, cscGeom);
594  doEfficiencies(wires,strips, recHits, cscSegments,cscGeom);
595  doBXMonitor(alcts, clcts, event, eventSetup);
596 }
597 
598 // ==============================================
599 //
600 // look at Occupancies
601 //
602 // ==============================================
603 
604 void CSCOfflineMonitor::doOccupancies(edm::Handle<CSCStripDigiCollection> strips, edm::Handle<CSCWireDigiCollection> wires,
605  edm::Handle<CSCRecHit2DCollection> recHits, edm::Handle<CSCSegmentCollection> cscSegments,
606  edm::Handle<CSCCLCTDigiCollection> clcts){
607 
608  bool clcto[2][4][4][36];
609  bool wireo[2][4][4][36];
610  bool stripo[2][4][4][36];
611  bool rechito[2][4][4][36];
612  bool segmento[2][4][4][36];
613 
614  bool hasWires = false;
615  bool hasStrips = false;
616  bool hasRecHits = false;
617  bool hasSegments = false;
618 
619  for (int e = 0; e < 2; e++){
620  for (int s = 0; s < 4; s++){
621  for (int r = 0; r < 4; r++){
622  for (int c = 0; c < 36; c++){
623  clcto[e][s][r][c] = false;
624  wireo[e][s][r][c] = false;
625  stripo[e][s][r][c] = false;
626  rechito[e][s][r][c] = false;
627  segmento[e][s][r][c] = false;
628  }
629  }
630  }
631  }
632 
633  //clcts
634  for (CSCCLCTDigiCollection::DigiRangeIterator j=clcts->begin(); j!=clcts->end(); j++) {
635  CSCDetId id = (CSCDetId)(*j).first;
636  int kEndcap = id.endcap();
637  int kRing = id.ring();
638  int kStation = id.station();
639  int kChamber = id.chamber();
640  const CSCCLCTDigiCollection::Range& range =(*j).second;
641  for (CSCCLCTDigiCollection::const_iterator digiIt = range.first; digiIt!=range.second; ++digiIt){
642  // Valid digi in the chamber (or in neighbouring chamber)
643  if((*digiIt).isValid()){
644  //Check whether this CLCT came from ME11a
645  if( kStation ==1 && kRing==1 && (*digiIt).getKeyStrip()>128)
646  kRing = 4;
647  clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
648  }
649  }
650  }
651 
652  //wires
653  for (CSCWireDigiCollection::DigiRangeIterator wi=wires->begin(); wi!=wires->end(); wi++) {
654  CSCDetId id = (CSCDetId)(*wi).first;
655  int kEndcap = id.endcap();
656  int kRing = id.ring();
657  int kStation = id.station();
658  int kChamber = id.chamber();
659  std::vector<CSCWireDigi>::const_iterator wireIt = (*wi).second.first;
660  std::vector<CSCWireDigi>::const_iterator lastWire = (*wi).second.second;
661  for( ; wireIt != lastWire; ++wireIt){
662  if (!wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
663  wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
664  hOWires->Fill(kChamber,typeIndex(id,2));
665  hOWireSerial->Fill(chamberSerial(id));
666  hasWires = true;
667  if( clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1])
668  hOWiresAndCLCT->Fill(kChamber,typeIndex(id,2));
669  //Also check for a CLCT in ME11a if you're in ME11 already
670  if (kStation==1 && kRing==1 && clcto[kEndcap-1][kStation-1][3][kChamber-1]){
671  CSCDetId idME11a = CSCDetId(kEndcap, kStation, 4, kChamber);
672  hOWiresAndCLCT->Fill(kChamber,typeIndex(idME11a,2));
673  }
674  }
675  }//end for loop
676  }
677 
678  //strips
679  for (CSCStripDigiCollection::DigiRangeIterator si=strips->begin(); si!=strips->end(); si++) {
680  CSCDetId id = (CSCDetId)(*si).first;
681  int kEndcap = id.endcap();
682  int kRing = id.ring();
683  int kStation = id.station();
684  int kChamber = id.chamber();
685  std::vector<CSCStripDigi>::const_iterator stripIt = (*si).second.first;
686  std::vector<CSCStripDigi>::const_iterator lastStrip = (*si).second.second;
687  for( ; stripIt != lastStrip; ++stripIt) {
688  std::vector<int> myADCVals = stripIt->getADCCounts();
689  bool thisStripFired = false;
690  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
691  float threshold = 13.3 ;
692  float diff = 0.;
693  for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
694  diff = (float)myADCVals[iCount]-thisPedestal;
695  if (diff > threshold) { thisStripFired = true; }
696  }
697  if (thisStripFired) {
698  if (!stripo[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
699  stripo[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
700  hOStrips->Fill(kChamber,typeIndex(id,2));
701  hOStripSerial->Fill(chamberSerial(id));
702  hasStrips = true;
703  if (clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
704  // check if there is a wire digi in this chamber too
705  // for ME 1/4 check for a wire in ME 1/1
706  if(wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1] || (kRing==4 && wireo[kEndcap-1][kStation-1][0][kChamber-1]) ){
707  hOStripsAndWiresAndCLCT->Fill(kChamber,typeIndex(id,2));
708  }
709  }//end clct and wire digi check
710  }
711  }//end if (thisStripFired)
712  }
713  }
714 
715  //rechits
716  CSCRecHit2DCollection::const_iterator recIt;
717  for (recIt = recHits->begin(); recIt != recHits->end(); recIt++) {
718  CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
719  int kEndcap = idrec.endcap();
720  int kRing = idrec.ring();
721  int kStation = idrec.station();
722  int kChamber = idrec.chamber();
723  if (!rechito[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
724  rechito[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
725  hORecHitsSerial->Fill(chamberSerial(idrec));
726  hORecHits->Fill(kChamber,typeIndex(idrec,2));
727  hasRecHits = true;
728  }
729  }
730 
731  //segments
732  for(CSCSegmentCollection::const_iterator segIt=cscSegments->begin(); segIt != cscSegments->end(); segIt++) {
733  CSCDetId id = (CSCDetId)(*segIt).cscDetId();
734  int kEndcap = id.endcap();
735  int kRing = id.ring();
736  int kStation = id.station();
737  int kChamber = id.chamber();
738  if (!segmento[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
739  segmento[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
740  hOSegmentsSerial->Fill(chamberSerial(id));
741  hOSegments->Fill(kChamber,typeIndex(id,2));
742  hasSegments = true;
743  }
744  }
745 
746  //Overall CSC Occupancy
747  hCSCOccupancy->Fill(1);
748  if (hasWires) hCSCOccupancy->Fill(3);
749  if (hasStrips) hCSCOccupancy->Fill(5);
750  if (hasWires && hasStrips) hCSCOccupancy->Fill(7);
751  if (hasRecHits) hCSCOccupancy->Fill(9);
752  if (hasSegments) hCSCOccupancy->Fill(11);
753 
754 
755  }
756 
757 
758 // ==============================================
759 //
760 // look at WIRE DIGIs
761 //
762 // ==============================================
763 
764 void CSCOfflineMonitor::doWireDigis(edm::Handle<CSCWireDigiCollection> wires){
765 
766  int nWireGroupsTotal = 0;
767  for (CSCWireDigiCollection::DigiRangeIterator dWDiter=wires->begin(); dWDiter!=wires->end(); dWDiter++) {
768  CSCDetId id = (CSCDetId)(*dWDiter).first;
769  std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
770  std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
771  for( ; wireIter != lWire; ++wireIter) {
772  int myWire = wireIter->getWireGroup();
773  int myTBin = wireIter->getTimeBin();
774  nWireGroupsTotal++;
775  hWireTBin[typeIndex(id)-1]->Fill(myTBin);
776  hWireNumber[typeIndex(id)-1]->Fill(myWire);
777  }
778  } // end wire loop
779 
780  // this way you can zero suppress but still store info on # events with no digis
781  // Tim: I'm unhappy with that since it breaks hist statistics
782  // if (nWireGroupsTotal == 0) nWireGroupsTotal = -1;
783  hWirenGroupsTotal->Fill(nWireGroupsTotal);
784 
785 }
786 
787 
788 // ==============================================
789 //
790 // look at STRIP DIGIs
791 //
792 // ==============================================
793 
794 void CSCOfflineMonitor::doStripDigis(edm::Handle<CSCStripDigiCollection> strips){
795 
796  int nStripsFired = 0;
797  for (CSCStripDigiCollection::DigiRangeIterator dSDiter=strips->begin(); dSDiter!=strips->end(); dSDiter++) {
798  CSCDetId id = (CSCDetId)(*dSDiter).first;
799  std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
800  std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
801  for( ; stripIter != lStrip; ++stripIter) {
802  int myStrip = stripIter->getStrip();
803  std::vector<int> myADCVals = stripIter->getADCCounts();
804  bool thisStripFired = false;
805  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
806  float threshold = 13.3 ;
807  float diff = 0.;
808  for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
809  diff = (float)myADCVals[iCount]-thisPedestal;
810  if (diff > threshold) { thisStripFired = true; }
811  }
812  if (thisStripFired) {
813  nStripsFired++;
814  hStripNumber[typeIndex(id)-1]->Fill(myStrip);
815  }
816  }
817  } // end strip loop
818 
819  // this way you can zero suppress but still store info on # events with no digis
820  // Tim: I guess the above comment means 'zero suppress' because the hist range is from -0.5.
821  // But doing this means the hist statistics are broken. If the zero bin is high, just apply log scale?
822  // if (nStripsFired == 0) nStripsFired = -1;
823  hStripNFired->Fill(nStripsFired);
824  // fill n per event
825 
826 }
827 
828 
829 //=======================================================
830 //
831 // Look at the Pedestal Noise Distributions
832 //
833 //=======================================================
834 
835 void CSCOfflineMonitor::doPedestalNoise(edm::Handle<CSCStripDigiCollection> strips,
836  edm::ESHandle<CSCGeometry> cscGeom ) {
837 
838  for (CSCStripDigiCollection::DigiRangeIterator dPNiter=strips->begin(); dPNiter!=strips->end(); dPNiter++) {
839  CSCDetId id = (CSCDetId)(*dPNiter).first;
840  int kStation = id.station();
841  int kRing = id.ring();
842  std::vector<CSCStripDigi>::const_iterator pedIt = (*dPNiter).second.first;
843  std::vector<CSCStripDigi>::const_iterator lStrip = (*dPNiter).second.second;
844  for( ; pedIt != lStrip; ++pedIt) {
845  int myStrip = pedIt->getStrip();
846  std::vector<int> myADCVals = pedIt->getADCCounts();
847  float TotalADC = getSignal(*strips, id, myStrip);
848  bool thisStripFired = false;
849  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
850  float thisSignal = (1./6)*(myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
851  float threshold = 13.3;
852 
853  // Why is this code block even here? Doesn't use myStrip after setting it (converts channel to strip
854  // for ganged ME11A
855  if( (kStation == 1 && kRing == 4) && cscGeom->gangedStrips() )
856  {
857  kRing = 1;
858  if(myStrip <= 16) myStrip += 64; // no trapping for any bizarreness
859  }
860 
861  if (TotalADC > threshold) { thisStripFired = true;}
862  if (!thisStripFired){
863  float ADC = thisSignal - thisPedestal;
864  hStripPed[typeIndex(id)-1]->Fill(ADC);
865  }
866  }
867  }
868 
869 }
870 
871 
872 // ==============================================
873 //
874 // look at RECHITs
875 //
876 // ==============================================
877 
878 void CSCOfflineMonitor::doRecHits(edm::Handle<CSCRecHit2DCollection> recHits,
879  edm::Handle<CSCStripDigiCollection> strips,
880  edm::ESHandle<CSCGeometry> cscGeom){
881 
882  // Get the RecHits collection :
883  int nRecHits = recHits->size();
884 
885  // ---------------------
886  // Loop over rechits
887  // ---------------------
888  // Build iterator for rechits and loop :
889  CSCRecHit2DCollection::const_iterator dRHIter;
890  for (dRHIter = recHits->begin(); dRHIter != recHits->end(); dRHIter++) {
891 
892  // Find chamber with rechits in CSC
893  CSCDetId idrec = (CSCDetId)(*dRHIter).cscDetId();
894 
895  // Store rechit as a Local Point:
896  LocalPoint rhitlocal = (*dRHIter).localPosition();
897  //float xreco = rhitlocal.x();
898  //float yreco = rhitlocal.y();
899 
900  // Get the reconstucted strip position and error
901  float stpos = (*dRHIter).positionWithinStrip();
902  float sterr = (*dRHIter).errorWithinStrip();
903 
905 
906  int adcsize = dRHIter->nStrips()*dRHIter->nTimeBins();
907  float rHSumQ = 0;
908  float sumsides = 0;
909  for (unsigned int i = 0; i < dRHIter->nStrips(); i++){
910  for (unsigned int j=0; j<dRHIter->nTimeBins()-1; j++) {
911  rHSumQ+=dRHIter->adcs(i,j);
912  if ( i != 1 ) sumsides += dRHIter->adcs(i,j); // skip central strip
913  }
914  }
915 
916  float rHratioQ = sumsides/rHSumQ;
917  if (adcsize != 12) rHratioQ = -99;
918 
919  // Get the signal timing of this hit
920  float rHtime = (*dRHIter).tpeak(); //calculated from cathode SCA bins
921  float rHtimeAnode = (*dRHIter).wireTime(); // calculated from anode wire bx
922 
923  // Get pointer to the layer:
924  const CSCLayer* csclayer = cscGeom->layer( idrec );
925 
926  // Transform hit position from local chamber geometry to global CMS geom
927  GlobalPoint rhitglobal= csclayer->toGlobal(rhitlocal);
928  float grecx = rhitglobal.x();
929  float grecy = rhitglobal.y();
930 
931  // Fill some histograms
932  int sIndex = idrec.station() + ((idrec.endcap()-1) * 4);
933  int tIndex = typeIndex(idrec);
934  hRHSumQ[tIndex-1]->Fill(rHSumQ);
935  hRHRatioQ[tIndex-1]->Fill(rHratioQ);
936  hRHstpos[tIndex-1]->Fill(stpos);
937  hRHsterr[tIndex-1]->Fill(sterr);
938  hRHTiming[tIndex-1]->Fill(rHtime);
939  hRHTimingAnode[tIndex-1]->Fill(rHtimeAnode);
940  hRHGlobal[sIndex-1]->Fill(grecx,grecy);
941 
942  } //end rechit loop
943 
944  // if (nRecHits == 0) nRecHits = -1; // I see no point in doing this
945  hRHnrechits->Fill(nRecHits);
946 
947 }
948 
949 
950 // ==============================================
951 //
952 // look at SEGMENTs
953 //
954 // ===============================================
955 
956 void CSCOfflineMonitor::doSegments(edm::Handle<CSCSegmentCollection> cscSegments,
957  edm::ESHandle<CSCGeometry> cscGeom){
958 
959  // get CSC segment collection
960  int nSegments = cscSegments->size();
961 
962  for(CSCSegmentCollection::const_iterator dSiter=cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
963  CSCDetId id = (CSCDetId)(*dSiter).cscDetId();
964  float chisq = (*dSiter).chi2();
965  int nhits = (*dSiter).nRecHits();
966  int nDOF = 2*nhits-4;
967  float nChi2 = chisq/nDOF;
968  double chisqProb = ChiSquaredProbability( (double)chisq, nDOF );
969  LocalPoint localPos = (*dSiter).localPosition();
970  LocalVector segDir = (*dSiter).localDirection();
971 
972  // prepare to calculate segment times
973  float timeCathode = 0; //average from cathode information alone
974  float timeAnode = 0; //average from pruned anode information alone
975  float timeCombined = 0; //average from cathode hits and pruned anode list
976  std::vector<float> cathodeTimes;
977  std::vector<float> anodeTimes;
978  // Get the CSC recHits that contribute to this segment.
979  std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
980  for ( vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
981  if ( !((*iRH).isValid()) ) continue; // only interested in valid hits
982  cathodeTimes.push_back((*iRH).tpeak());
983  anodeTimes.push_back((*iRH).wireTime());
984  }//end rechit loop
985 
986  // Calculate cathode average
987  for (unsigned int i=0; i<cathodeTimes.size(); i++)
988  timeCathode+=cathodeTimes[i]/cathodeTimes.size();
989 
990  // Prune the anode list to deal with the late tail
991  float anodeMaxDiff;
992  bool modified = false;
993  std::vector<float>::iterator anodeMaxHit;
994  do {
995  if (anodeTimes.empty()) continue;
996  timeAnode=0;
997  anodeMaxDiff=0;
998  modified=false;
999 
1000  // Find the average
1001  for (unsigned int j=0; j<anodeTimes.size(); j++) timeAnode+=anodeTimes[j]/anodeTimes.size();
1002 
1003  // Find the maximum outlier hit
1004  for (unsigned int j=0; j<anodeTimes.size(); j++) {
1005  if (fabs(anodeTimes[j]-timeAnode)>anodeMaxDiff) {
1006  anodeMaxHit=anodeTimes.begin()+j;
1007  anodeMaxDiff=fabs(anodeTimes[j]-timeAnode);
1008  }
1009  }
1010 
1011  // Cut hit if its greater than some time away
1012  if (anodeMaxDiff>26) {
1013  modified=true;
1014  anodeTimes.erase(anodeMaxHit);
1015  }
1016  } while (modified);
1017 
1018  // Calculate combined anode and cathode time average
1019  if(cathodeTimes.size()+anodeTimes.size() >0 )
1020  timeCombined = (timeCathode*cathodeTimes.size() + timeAnode*anodeTimes.size())/(cathodeTimes.size()+anodeTimes.size());
1021 
1022  // global transformation
1023  float globX = 0.;
1024  float globY = 0.;
1025  float globZ = 0.;
1026  float globTOF = 0.;
1027  float globTheta = 0.;
1028  float globPhi = 0.;
1029  const CSCChamber* cscchamber = cscGeom->chamber(id);
1030  if (cscchamber) {
1031  GlobalPoint globalPosition = cscchamber->toGlobal(localPos);
1032  globX = globalPosition.x();
1033  globY = globalPosition.y();
1034  globZ = globalPosition.z();
1035  globTOF = sqrt(globX*globX+globY*globY+globZ*globZ);
1036  GlobalVector globalDirection = cscchamber->toGlobal(segDir);
1037  globTheta = globalDirection.theta();
1038  globPhi = globalDirection.phi();
1039  }
1040 
1041  // Fill histos
1042  int tIndex = typeIndex(id);
1043  hSnhitsAll->Fill(nhits);
1044  hSnhits[tIndex-1]->Fill(nhits);
1045  hSChiSqAll->Fill(nChi2);
1046  hSChiSq[tIndex-1]->Fill(nChi2);
1047  hSChiSqProbAll->Fill(chisqProb);
1048  hSChiSqProb[tIndex-1]->Fill(chisqProb);
1049  hSGlobalTheta->Fill(globTheta);
1050  hSGlobalPhi->Fill(globPhi);
1051  hSTimeDiff->Fill(timeAnode-timeCathode);
1052  hSTimeDiffByChamberType[tIndex-1]->Fill(timeAnode-timeCathode);
1053  hSTimeAnode->Fill(timeAnode);
1054  hSTimeAnodeByChamberType[tIndex-1]->Fill(timeAnode);
1055  hSTimeCathode->Fill(timeCathode);
1056  hSTimeCathodeByChamberType[tIndex-1]->Fill(timeCathode);
1057  hSTimeCombined->Fill(timeCombined);
1058  hSTimeCombinedByChamberType[tIndex-1]->Fill(timeCombined);
1059  hSTimeDiffSerial->Fill(chamberSerial(id),timeAnode-timeCathode);
1060  hSTimeAnodeSerial->Fill(chamberSerial(id),timeAnode);
1061  hSTimeCathodeSerial->Fill(chamberSerial(id),timeCathode);
1062  hSTimeCombinedSerial->Fill(chamberSerial(id),timeCombined);
1063  hSTimeVsZ->Fill(globZ, timeCombined);
1064  hSTimeVsTOF->Fill(globTOF, timeCombined);
1065 
1066  } // end segment loop
1067 
1068  // if (nSegments == 0) nSegments = -1; // I see no point in doing this
1069  hSnSegments->Fill(nSegments);
1070 
1071 }
1072 
1073 // ==============================================
1074 //
1075 // look at hit Resolution
1076 //
1077 // ==============================================
1078 void CSCOfflineMonitor::doResolution(edm::Handle<CSCSegmentCollection> cscSegments,
1079  edm::ESHandle<CSCGeometry> cscGeom){
1080 
1081  for(CSCSegmentCollection::const_iterator dSiter=cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
1082  CSCDetId id = (CSCDetId)(*dSiter).cscDetId();
1083  //
1084  // try to get the CSC recHits that contribute to this segment.
1085  std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
1086  int nRH = (*dSiter).nRecHits();
1087  int jRH = 0;
1088  CLHEP::HepMatrix sp(6,1);
1089  CLHEP::HepMatrix se(6,1);
1090  for ( vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
1091  jRH++;
1092  CSCDetId idRH = (CSCDetId)(*iRH).cscDetId();
1093  //int kEndcap = idRH.endcap();
1094  int kRing = idRH.ring();
1095  int kStation = idRH.station();
1096  //int kChamber = idRH.chamber();
1097  int kLayer = idRH.layer();
1098 
1100  int centerid = iRH->nStrips()/2 + 1;
1101  int centerStrip = iRH->channels(centerid - 1);
1102 
1103  // If this segment has 6 hits, find the position of each hit on the strip in units of stripwidth and store values
1104  if (nRH == 6){
1105  float stpos = (*iRH).positionWithinStrip();
1106  se(kLayer,1) = (*iRH).errorWithinStrip();
1107  // Take into account half-strip staggering of layers (ME1/1 has no staggering)
1108  if (kStation == 1 && (kRing == 1 || kRing == 4)) sp(kLayer,1) = stpos + centerStrip;
1109  else{
1110  if (kLayer == 1 || kLayer == 3 || kLayer == 5) sp(kLayer,1) = stpos + centerStrip;
1111  if (kLayer == 2 || kLayer == 4 || kLayer == 6) sp(kLayer,1) = stpos - 0.5 + centerStrip;
1112  }
1113  }
1114 
1115  }
1116 
1117 
1118 
1119  // Fit all points except layer 3, then compare expected value for layer 3 to reconstructed value
1120  // float residual = -99.; // used to fill always
1121  if (nRH == 6){
1122  float expected = fitX(sp,se);
1123  float residual = expected - sp(3,1);
1124 
1125  hSResid[typeIndex(id)-1]->Fill(residual); // fill here so stats make sense
1126  }
1127 
1128  // hSResid[typeIndex(id)-1]->Fill(residual); // used to fill here but then stats distorted by underflows
1129 
1130  } // end segment loop
1131 
1132 
1133 
1134 }
1135 
1136 
1137 //-------------------------------------------------------------------------------------
1138 // Fits a straight line to a set of 5 points with errors. Functions assumes 6 points
1139 // and removes hit in layer 3. It then returns the expected position value in layer 3
1140 // based on the fit.
1141 //-------------------------------------------------------------------------------------
1142 float CSCOfflineMonitor::fitX(const CLHEP::HepMatrix& points, const CLHEP::HepMatrix& errors){
1143 
1144  float S = 0;
1145  float Sx = 0;
1146  float Sy = 0;
1147  float Sxx = 0;
1148  float Sxy = 0;
1149  float sigma2 = 0;
1150 
1151  for (int i=1;i<7;i++){
1152  if (i != 3){
1153  sigma2 = errors(i,1)*errors(i,1);
1154  S = S + (1/sigma2);
1155  Sy = Sy + (points(i,1)/sigma2);
1156  Sx = Sx + ((i)/sigma2);
1157  Sxx = Sxx + (i*i)/sigma2;
1158  Sxy = Sxy + (((i)*points(i,1))/sigma2);
1159  }
1160  }
1161 
1162  float delta = S*Sxx - Sx*Sx;
1163  float intercept = (Sxx*Sy - Sx*Sxy)/delta;
1164  float slope = (S*Sxy - Sx*Sy)/delta;
1165 
1166  return (intercept + slope*3);
1167 
1168 }
1169 
1170 //---------------------------------------------------------------------------------------
1171 // Given a set of digis, the CSCDetId, and the central strip of your choosing, returns
1172 // the avg. Signal-Pedestal for 6 time bin x 5 strip .
1173 //
1174 // Author: P. Jindal
1175 //---------------------------------------------------------------------------------------
1176 
1177 float CSCOfflineMonitor::getSignal(const CSCStripDigiCollection& stripdigis,
1178  CSCDetId idCS, int centerStrip){
1179 
1180  float SigADC[5];
1181  float TotalADC = 0;
1182  SigADC[0] = 0;
1183  SigADC[1] = 0;
1184  SigADC[2] = 0;
1185  SigADC[3] = 0;
1186  SigADC[4] = 0;
1187 
1188 
1189  // Loop over strip digis
1190  CSCStripDigiCollection::DigiRangeIterator sIt;
1191 
1192  for (sIt = stripdigis.begin(); sIt != stripdigis.end(); sIt++){
1193  CSCDetId id = (CSCDetId)(*sIt).first;
1194  if (id == idCS){
1195 
1196  // First, find the Signal-Pedestal for center strip
1197  vector<CSCStripDigi>::const_iterator digiItr = (*sIt).second.first;
1198  vector<CSCStripDigi>::const_iterator last = (*sIt).second.second;
1199  for ( ; digiItr != last; ++digiItr ) {
1200  int thisStrip = digiItr->getStrip();
1201  if (thisStrip == (centerStrip)){
1202  std::vector<int> myADCVals = digiItr->getADCCounts();
1203  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1204  float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
1205  SigADC[0] = thisSignal - 6*thisPedestal;
1206  }
1207  // Now,find the Signal-Pedestal for neighbouring 4 strips
1208  if (thisStrip == (centerStrip+1)){
1209  std::vector<int> myADCVals = digiItr->getADCCounts();
1210  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1211  float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
1212  SigADC[1] = thisSignal - 6*thisPedestal;
1213  }
1214  if (thisStrip == (centerStrip+2)){
1215  std::vector<int> myADCVals = digiItr->getADCCounts();
1216  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1217  float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
1218  SigADC[2] = thisSignal - 6*thisPedestal;
1219  }
1220  if (thisStrip == (centerStrip-1)){
1221  std::vector<int> myADCVals = digiItr->getADCCounts();
1222  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1223  float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
1224  SigADC[3] = thisSignal - 6*thisPedestal;
1225  }
1226  if (thisStrip == (centerStrip-2)){
1227  std::vector<int> myADCVals = digiItr->getADCCounts();
1228  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1229  float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
1230  SigADC[4] = thisSignal - 6*thisPedestal;
1231  }
1232  }
1233  TotalADC = 0.2*(SigADC[0]+SigADC[1]+SigADC[2]+SigADC[3]+SigADC[4]);
1234  }
1235  }
1236  return TotalADC;
1237 }
1238 
1239 
1240 
1241 //----------------------------------------------------------------------------
1242 // Calculate basic efficiencies for recHits and Segments
1243 // Author: S. Stoynev
1244 //----------------------------------------------------------------------------
1245 
1246 void CSCOfflineMonitor::doEfficiencies(edm::Handle<CSCWireDigiCollection> wires, edm::Handle<CSCStripDigiCollection> strips,
1247  edm::Handle<CSCRecHit2DCollection> recHits, edm::Handle<CSCSegmentCollection> cscSegments,
1248  edm::ESHandle<CSCGeometry> cscGeom){
1249 
1250  bool allWires[2][4][4][36][6];
1251  bool allStrips[2][4][4][36][6];
1252  bool AllRecHits[2][4][4][36][6];
1253  bool AllSegments[2][4][4][36];
1254 
1255  //bool MultiSegments[2][4][4][36];
1256  for(int iE = 0;iE<2;iE++){
1257  for(int iS = 0;iS<4;iS++){
1258  for(int iR = 0; iR<4;iR++){
1259  for(int iC =0;iC<36;iC++){
1260  AllSegments[iE][iS][iR][iC] = false;
1261  //MultiSegments[iE][iS][iR][iC] = false;
1262  for(int iL=0;iL<6;iL++){
1263  allWires[iE][iS][iR][iC][iL] = false;
1264  allStrips[iE][iS][iR][iC][iL] = false;
1265  AllRecHits[iE][iS][iR][iC][iL] = false;
1266  }
1267  }
1268  }
1269  }
1270  }
1271 
1272 
1273  // Wires
1274  for (CSCWireDigiCollection::DigiRangeIterator dWDiter=wires->begin(); dWDiter!=wires->end(); dWDiter++) {
1275  CSCDetId idrec = (CSCDetId)(*dWDiter).first;
1276  std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
1277  std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
1278  for( ; wireIter != lWire; ++wireIter) {
1279  allWires[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;
1280  break;
1281  }
1282  }
1283 
1284  //---- STRIPS
1285  for (CSCStripDigiCollection::DigiRangeIterator dSDiter=strips->begin(); dSDiter!=strips->end(); dSDiter++) {
1286  CSCDetId idrec = (CSCDetId)(*dSDiter).first;
1287  std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
1288  std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
1289  for( ; stripIter != lStrip; ++stripIter) {
1290  std::vector<int> myADCVals = stripIter->getADCCounts();
1291  bool thisStripFired = false;
1292  float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
1293  float threshold = 13.3 ;
1294  float diff = 0.;
1295  for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
1296  diff = (float)myADCVals[iCount]-thisPedestal;
1297  if (diff > threshold) {
1298  thisStripFired = true;
1299  break;
1300  }
1301  }
1302  if(thisStripFired){
1303  allStrips[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;
1304  break;
1305  }
1306  }
1307  }
1308 
1309  // Rechits
1310  for (CSCRecHit2DCollection::const_iterator recEffIt = recHits->begin(); recEffIt != recHits->end(); recEffIt++) {
1311  //CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
1312  CSCDetId idrec = (CSCDetId)(*recEffIt).cscDetId();
1313  AllRecHits[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;
1314 
1315  }
1316 
1317  std::vector <uint> seg_ME2(2,0) ;
1318  std::vector <uint> seg_ME3(2,0) ;
1319  std::vector < pair <CSCDetId, CSCSegment> > theSegments(4);
1320  // Segments
1321  for(CSCSegmentCollection::const_iterator segEffIt=cscSegments->begin(); segEffIt != cscSegments->end(); segEffIt++) {
1322  CSCDetId idseg = (CSCDetId)(*segEffIt).cscDetId();
1323  //if(AllSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()]){
1324  //MultiSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()] = true;
1325  //}
1326  AllSegments[idseg.endcap() -1][idseg.station() -1][idseg.ring() -1][idseg.chamber() -1] = true;
1327  // "Intrinsic" efficiency measurement relies on "good" segment extrapolation - we need the pre-selection below
1328  // station 2 "good" segment will be used for testing efficiencies in ME1 and ME3
1329  // station 3 "good" segment will be used for testing efficiencies in ME2 and ME4
1330  if(2==idseg.station() || 3==idseg.station()){
1331  uint seg_tmp ;
1332  if(2==idseg.station()){
1333  ++seg_ME2[idseg.endcap() -1];
1334  seg_tmp = seg_ME2[idseg.endcap() -1];
1335  }
1336  else{
1337  ++seg_ME3[idseg.endcap() -1];
1338  seg_tmp = seg_ME3[idseg.endcap() -1];
1339  }
1340  // is the segment good
1341  if(1== seg_tmp&& 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
1342  pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
1343  theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
1344  }
1345  }
1346  /*
1347  if(2==idseg.station()){
1348  ++seg_ME2[idseg.endcap() -1];
1349  if(1==seg_ME2[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
1350  pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
1351  theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
1352  }
1353  }
1354  else if(3==idseg.station()){
1355  ++seg_ME3[idseg.endcap() -1];
1356  if(1==seg_ME3[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
1357  pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
1358  theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
1359  }
1360  }
1361  */
1362 
1363  }
1364  // Simple efficiency calculations
1365  for(int iE = 0;iE<2;iE++){
1366  for(int iS = 0;iS<4;iS++){
1367  for(int iR = 0; iR<4;iR++){
1368  for(int iC =0;iC<36;iC++){
1369  int NumberOfLayers = 0;
1370  for(int iL=0;iL<6;iL++){
1371  if(AllRecHits[iE][iS][iR][iC][iL]){
1372  NumberOfLayers++;
1373  }
1374  }
1375  int bin = 0;
1376  if (iS==0) bin = iR+1+(iE*10);
1377  else bin = (iS+1)*2 + (iR+1) + (iE*10);
1378  if(NumberOfLayers>1){
1379  //if(!(MultiSegments[iE][iS][iR][iC])){
1380  if(AllSegments[iE][iS][iR][iC]){
1381  //---- Efficient segment evenents
1382  hSnum->Fill(bin);
1383  }
1384  //---- All segment events (normalization)
1385  hSden->Fill(bin);
1386  //}
1387  }
1388  if(AllSegments[iE][iS][iR][iC]){
1389  if(NumberOfLayers==6){
1390  //---- Efficient rechit events
1391  hRHnum->Fill(bin);;
1392  }
1393  //---- All rechit events (normalization)
1394  hRHden->Fill(bin);;
1395  }
1396  }
1397  }
1398  }
1399  }
1400 
1401  // pick a segment only if there are no others in the station
1402  std::vector < pair <CSCDetId, CSCSegment> * > theSeg;
1403  if(1==seg_ME2[0]) theSeg.push_back(&theSegments[0]);
1404  if(1==seg_ME3[0]) theSeg.push_back(&theSegments[1]);
1405  if(1==seg_ME2[1]) theSeg.push_back(&theSegments[2]);
1406  if(1==seg_ME3[1]) theSeg.push_back(&theSegments[3]);
1407 
1408  // Needed for plots
1409  // at the end the chamber types will be numbered as 1 to 20
1410  // (ME-4./2, ME-4/1, -ME3/2, -ME3/1, ..., +ME3/1, +ME3/2, ME+4/1, ME+4/2)
1411  std::map <std::string, float> chamberTypes;
1412  chamberTypes["ME1/a"] = 0.5;
1413  chamberTypes["ME1/b"] = 1.5;
1414  chamberTypes["ME1/2"] = 2.5;
1415  chamberTypes["ME1/3"] = 3.5;
1416  chamberTypes["ME2/1"] = 4.5;
1417  chamberTypes["ME2/2"] = 5.5;
1418  chamberTypes["ME3/1"] = 6.5;
1419  chamberTypes["ME3/2"] = 7.5;
1420  chamberTypes["ME4/1"] = 8.5;
1421  chamberTypes["ME4/2"] = 9.5;
1422 
1423  if(!theSeg.empty()){
1424  std::map <int , GlobalPoint> extrapolatedPoint;
1425  std::map <int , GlobalPoint>::iterator it;
1426  const CSCGeometry::ChamberContainer& ChamberContainer = cscGeom->chambers();
1427  // Pick which chamber with which segment to test
1428  for(unsigned int nCh=0;nCh<ChamberContainer.size();nCh++){
1429  const CSCChamber *cscchamber = ChamberContainer[nCh];
1430  pair <CSCDetId, CSCSegment> * thisSegment = nullptr;
1431  for(uint iSeg =0;iSeg<theSeg.size();++iSeg ){
1432  if(cscchamber->id().endcap() == theSeg[iSeg]->first.endcap()){
1433  if(1==cscchamber->id().station() || 3==cscchamber->id().station() ){
1434  if(2==theSeg[iSeg]->first.station()){
1435  thisSegment = theSeg[iSeg];
1436  }
1437  }
1438  else if (2==cscchamber->id().station() || 4==cscchamber->id().station()){
1439  if(3==theSeg[iSeg]->first.station()){
1440  thisSegment = theSeg[iSeg];
1441  }
1442  }
1443  }
1444  }
1445  // this chamber is to be tested with thisSegment
1446  if(thisSegment){
1447  CSCSegment * seg = &(thisSegment->second);
1448  const CSCChamber *segChamber = cscGeom->chamber(thisSegment->first);
1449  LocalPoint localCenter(0.,0.,0);
1450  GlobalPoint cscchamberCenter = cscchamber->toGlobal(localCenter);
1451  // try to save some time (extrapolate a segment to a certain position only once)
1452  it = extrapolatedPoint.find(int(cscchamberCenter.z()));
1453  if(it==extrapolatedPoint.end()){
1454  GlobalPoint segPos = segChamber->toGlobal(seg->localPosition());
1455  GlobalVector segDir = segChamber->toGlobal(seg->localDirection());
1456  double paramaterLine = lineParametrization(segPos.z(),cscchamberCenter.z() , segDir.z());
1457  double xExtrapolated = extrapolate1D(segPos.x(),segDir.x(), paramaterLine);
1458  double yExtrapolated = extrapolate1D(segPos.y(),segDir.y(), paramaterLine);
1459  GlobalPoint globP (xExtrapolated, yExtrapolated, cscchamberCenter.z());
1460  extrapolatedPoint[int(cscchamberCenter.z())] = globP;
1461  }
1462  // Where does the extrapolated point lie in the (tested) chamber local frame? Here:
1463  LocalPoint extrapolatedPointLocal = cscchamber->toLocal(extrapolatedPoint[int(cscchamberCenter.z())]);
1464  const CSCLayer *layer_p = cscchamber->layer(1);//layer 1
1465  const CSCLayerGeometry *layerGeom = layer_p->geometry ();
1466  const std::array<const float, 4> & layerBounds = layerGeom->parameters ();
1467  float shiftFromEdge = 15.;//cm
1468  float shiftFromDeadZone = 10.;
1469  // is the extrapolated point within a sensitive region
1470  bool pass = withinSensitiveRegion(extrapolatedPointLocal, layerBounds,
1471  cscchamber->id().station(), cscchamber->id().ring(),
1472  shiftFromEdge, shiftFromDeadZone);
1473  if(pass){// the extrapolation point of the segment lies within sensitive region of that chamber
1474  // how many rechit layers are there in the chamber?
1475  // 0 - maybe the muon died or is deflected at large angle? do not use that case
1476  // 1 - could be noise...
1477  // 2 or more - this is promissing; this is our definition of a reliable signal; use it below
1478  // is other definition better?
1479  int nRHLayers = 0;
1480  for(int iL =0;iL<6;++iL){
1481  if(AllRecHits[cscchamber->id().endcap()-1]
1482  [cscchamber->id().station()-1]
1483  [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
1484  ++nRHLayers;
1485  }
1486  }
1487  //std::cout<<" nRHLayers = "<<nRHLayers<<std::endl;
1488  float verticalScale = chamberTypes[cscchamber->specs()->chamberTypeName()];
1489  if(cscchamberCenter.z()<0){
1490  verticalScale = - verticalScale;
1491  }
1492  verticalScale += 10.5;
1493  hSensitiveAreaEvt->Fill(float(cscchamber->id().chamber()),verticalScale);
1494  if(nRHLayers>1){// this chamber contains a reliable signal
1495  //chamberTypes[cscchamber->specs()->chamberTypeName()];
1496  // "intrinsic" efficiencies
1497  //std::cout<<" verticalScale = "<<verticalScale<<" chType = "<<cscchamber->specs()->chamberTypeName()<<std::endl;
1498  // this is the denominator forr all efficiencies
1499  hEffDenominator->Fill(float(cscchamber->id().chamber()),verticalScale);
1500  // Segment efficiency
1501  if(AllSegments[cscchamber->id().endcap()-1]
1502  [cscchamber->id().station()-1]
1503  [cscchamber->id().ring()-1][cscchamber->id().chamber()-1]){
1504  hSSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale));
1505  }
1506 
1507  for(int iL =0;iL<6;++iL){
1508  float weight = 1./6.;
1509  // one shold account for the weight in the efficiency...
1510  // Rechit efficiency
1511  if(AllRecHits[cscchamber->id().endcap()-1]
1512  [cscchamber->id().station()-1]
1513  [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
1514  hRHSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
1515  }
1516  // Wire efficiency
1517  if(allWires[cscchamber->id().endcap()-1]
1518  [cscchamber->id().station()-1]
1519  [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
1520  // one shold account for the weight in the efficiency...
1521  hWireSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
1522  }
1523  // Strip efficiency
1524  if(allStrips[cscchamber->id().endcap()-1]
1525  [cscchamber->id().station()-1]
1526  [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
1527  // one shold account for the weight in the efficiency...
1528  hStripSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
1529  }
1530  }
1531  }
1532  }
1533  }
1534  }
1535  }
1536  //
1537 
1538 
1539 }
1540 
1541 // ==============================================
1542 //
1543 // Look at BX level trigger synchronization
1544 //
1545 // ==============================================
1546 
1547 void CSCOfflineMonitor::doBXMonitor(edm::Handle<CSCALCTDigiCollection> alcts, edm::Handle<CSCCLCTDigiCollection> clcts,
1548  const edm::Event & event, const edm::EventSetup& eventSetup){
1549 
1550  // Loop over ALCTDigis
1551 
1552  for (CSCALCTDigiCollection::DigiRangeIterator j=alcts->begin(); j!=alcts->end(); j++) {
1553  const CSCDetId& idALCT = (*j).first;
1554  const CSCALCTDigiCollection::Range& range =(*j).second;
1555  for (CSCALCTDigiCollection::const_iterator digiIt = range.first; digiIt!=range.second; ++digiIt){
1556  // Valid digi in the chamber (or in neighbouring chamber)
1557  if((*digiIt).isValid()){
1558  hALCTgetBX->Fill((*digiIt).getBX());
1559  hALCTgetBXSerial->Fill(chamberSerial(idALCT),(*digiIt).getBX());
1560  hALCTgetBX2DNumerator->Fill(idALCT.chamber(),typeIndex(idALCT,2),(*digiIt).getBX());
1561  hALCTgetBX2Denominator->Fill(idALCT.chamber(),typeIndex(idALCT,2));
1562  }
1563  }
1564  }// end ALCT Digi loop
1565 
1566 
1567  // Loop over raw data to get TMBHeader information
1568  // Taking code from EventFilter/CSCRawToDigis/CSCDCCUnpacker.cc
1569  edm::ESHandle<CSCCrateMap> hcrate;
1570  eventSetup.get<CSCCrateMapRcd>().get(hcrate);
1571  const CSCCrateMap* pcrate = hcrate.product();
1572 
1573 
1574  // Try to get raw data
1575  edm::Handle<FEDRawDataCollection> rawdata;
1576  if ( !( event.getByToken( rd_token, rawdata ) ) ){
1577  edm::LogWarning("CSCOfflineMonitor") << " FEDRawDataCollection not available";
1578  return;
1579  }
1580 
1581 
1582 
1583  bool goodEvent = false;
1584  unsigned long dccBinCheckMask = 0x06080016;
1585  unsigned int examinerMask = 0x1FEBF3F6;
1586  unsigned int errorMask = 0x0;
1587 
1588  // For new CSC readout layout, which doesn't include DCCs need to loop over DDU FED IDs.
1589  // DCC IDs are included for backward compatibility with old data
1590  std::vector<unsigned int> cscFEDids;
1591 
1592  for (unsigned int id=FEDNumbering::MINCSCFEDID;
1593  id<=FEDNumbering::MAXCSCFEDID; ++id) // loop over DCCs
1594  {
1595  cscFEDids.push_back(id);
1596  }
1597 
1598  for (unsigned int id=FEDNumbering::MINCSCDDUFEDID;
1599  id<=FEDNumbering::MAXCSCDDUFEDID; ++id) // loop over DDUs
1600  {
1601  cscFEDids.push_back(id);
1602  }
1603 
1604  for (unsigned int i=0; i<cscFEDids.size(); i++) // loop over all CSC FEDs (DCCs and DDUs)
1605  {
1606  unsigned int id = cscFEDids[i];
1607  bool isDDU_FED = ((id >= FEDNumbering::MINCSCDDUFEDID) && (id <= FEDNumbering::MAXCSCDDUFEDID))?true:false;
1608 
1611 
1613  const FEDRawData& fedData = rawdata->FEDData(id);
1614  unsigned long length = fedData.size();
1615 
1616  if (length>=32){
1617  CSCDCCExaminer* examiner = nullptr;
1618  std::stringstream examiner_out, examiner_err;
1619  goodEvent = true;
1620  examiner = new CSCDCCExaminer();
1621  if( examinerMask&0x40000 ) examiner->crcCFEB(true);
1622  if( examinerMask&0x8000 ) examiner->crcTMB (true);
1623  if( examinerMask&0x0400 ) examiner->crcALCT(true);
1624  examiner->setMask(examinerMask);
1625  const short unsigned int *data = (short unsigned int *)fedData.data();
1626 
1627  int res = examiner->check(data,long(fedData.size()/2));
1628  if( res < 0 ) {
1629  goodEvent=false;
1630  }
1631  else {
1632  goodEvent=!(examiner->errors()&dccBinCheckMask);
1633  }
1634 
1635 
1636  if (goodEvent) {
1638 
1639  CSCDCCExaminer * ptrExaminer = examiner;
1640 
1641  std::vector<CSCDDUEventData> fed_Data;
1642  std::vector<CSCDDUEventData>* ptr_fedData = &fed_Data;
1643 
1644 
1645  if (isDDU_FED) // Use new DDU FED readout mode
1646  {
1647 
1648  CSCDDUEventData single_dduData((short unsigned int *) fedData.data(), ptrExaminer);
1649  fed_Data.push_back(single_dduData);
1650 
1651  }
1652  else // Use old DCC FED readout mode
1653  {
1654  CSCDCCEventData dccData((short unsigned int *) fedData.data(), ptrExaminer);
1655  fed_Data = dccData.dduData();
1656  }
1657 
1659  const std::vector<CSCDDUEventData> & dduData = *ptr_fedData;
1660 
1662  CSCDetId layer(1, 1, 1, 1, 1);
1663  for (unsigned int iDDU=0; iDDU<dduData.size(); ++iDDU) { // loop over DDUs
1666  if (dduData[iDDU].trailer().errorstat()&errorMask) {
1667  LogTrace("CSCDCCUnpacker|CSCRawToDigi") << "DDU# " << iDDU << " has serious error - no digis unpacked! " <<
1668  std::hex << dduData[iDDU].trailer().errorstat();
1669  continue; // to next iteration of DDU loop
1670  }
1671 
1673  const std::vector<CSCEventData> & cscData = dduData[iDDU].cscData();
1674 
1675 
1676  for (unsigned int iCSC=0; iCSC<cscData.size(); ++iCSC) { // loop over CSCs
1677 
1679  int vmecrate = cscData[iCSC].dmbHeader()->crateID();
1680  int dmb = cscData[iCSC].dmbHeader()->dmbID();
1681 
1682  int icfeb = 0;
1683  int ilayer = 0;
1684 
1685  if ((vmecrate>=1)&&(vmecrate<=60) && (dmb>=1)&&(dmb<=10)&&(dmb!=6)) {
1686  layer = pcrate->detId(vmecrate, dmb,icfeb,ilayer );
1687  }
1688  else{
1689  LogTrace ("CSCOfflineMonitor") << " detID input out of range!!! ";
1690  LogTrace ("CSCOfflineMonitor")
1691  << " skipping chamber vme= " << vmecrate << " dmb= " << dmb;
1692  continue; // to next iteration of iCSC loop
1693  }
1694 
1695 
1697  int nalct = cscData[iCSC].dmbHeader()->nalct();
1698  bool goodALCT=false;
1699  //if (nalct&&(cscData[iCSC].dataPresent>>6&0x1)==1) {
1700  if (nalct&&cscData[iCSC].alctHeader()) {
1701  if (cscData[iCSC].alctHeader()->check()){
1702  goodALCT=true;
1703  }
1704  }
1705 
1707  int nclct = cscData[iCSC].dmbHeader()->nclct();
1708  bool goodTMB=false;
1709  if (nclct&&cscData[iCSC].tmbData()) {
1710  if (cscData[iCSC].tmbHeader()->check()){
1711  if (cscData[iCSC].clctData()->check()) goodTMB=true;
1712  }
1713  }
1714 
1715  if (goodTMB && goodALCT) {
1716  const CSCTMBHeader *tmbHead = cscData[iCSC].tmbHeader();
1717  std::vector<CSCCLCTDigi> clcts = cscData[iCSC].tmbHeader()->CLCTDigis(layer.rawId());
1718  if (clcts.empty() || !(clcts[0].isValid()))
1719  continue;
1720  // Check if the CLCT was in ME11a (ring 4)
1721  if(layer.station()==1 && layer.ring() ==1 && clcts[0].getKeyStrip()>128){
1722  layer = CSCDetId(layer.endcap(),layer.station(),4, layer.chamber());
1723  }
1724  hALCTMatch->Fill(tmbHead->ALCTMatchTime());
1725  hALCTMatchSerial->Fill(chamberSerial(layer),tmbHead->ALCTMatchTime());
1726  // Only fill big 2D display if ALCTMatchTime !=6, since this bin is polluted by the CLCT only triggers
1727  // One will have to look at the serial plots to see if the are a lot of entries here
1728  if(tmbHead->ALCTMatchTime()!=6){
1729  hALCTMatch2DNumerator->Fill(layer.chamber(),typeIndex(layer,2),tmbHead->ALCTMatchTime());
1730  hALCTMatch2Denominator->Fill(layer.chamber(),typeIndex(layer,2));
1731  }
1732 
1733  int TMB_CLCTpre_rel_L1A = tmbHead->BXNCount()-clcts[0].getFullBX();
1734  if (TMB_CLCTpre_rel_L1A > 3563)
1735  TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A - 3564;
1736  if (TMB_CLCTpre_rel_L1A < 0)
1737  TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A + 3564;
1738 
1739  hCLCTL1A->Fill(TMB_CLCTpre_rel_L1A);
1740  hCLCTL1ASerial->Fill(chamberSerial(layer),TMB_CLCTpre_rel_L1A);
1741  hCLCTL1A2DNumerator->Fill(layer.chamber(),typeIndex(layer,2),TMB_CLCTpre_rel_L1A);
1742  hCLCTL1A2Denominator->Fill(layer.chamber(),typeIndex(layer,2));
1743 
1744  }// end if goodTMB and goodALCT
1745  }// end loop CSCData
1746  }// end loop DDU
1747  }// end if good event
1748  if (examiner!=nullptr) delete examiner;
1749  }// end if non-zero fed data
1750  }// end DCC loop for NON-REFERENCE
1751 
1752  return;
1753 
1754 }
1755 
1756 bool CSCOfflineMonitor::withinSensitiveRegion(LocalPoint localPos, const std::array<const float, 4> & layerBounds,
1757  int station, int ring, float shiftFromEdge, float shiftFromDeadZone){
1758 //---- check if it is in a good local region (sensitive area - geometrical and HV boundaries excluded)
1759  bool pass = false;
1760 
1761  float y_center = 0.;
1762  double yUp = layerBounds[3] + y_center;
1763  double yDown = - layerBounds[3] + y_center;
1764  double xBound1Shifted = layerBounds[0] - shiftFromEdge;//
1765  double xBound2Shifted = layerBounds[1] - shiftFromEdge;//
1766  double lineSlope = (yUp - yDown)/(xBound2Shifted-xBound1Shifted);
1767  double lineConst = yUp - lineSlope*xBound2Shifted;
1768  double yBorder = lineSlope*abs(localPos.x()) + lineConst;
1769 
1770  //bool withinChamberOnly = false;// false = "good region"; true - boundaries only
1771  std::vector <float> deadZoneCenter(6);
1772  float cutZone = shiftFromDeadZone;//cm
1773  //---- hardcoded... not good
1774  if(station>1 && station<5){
1775  if(2==ring){
1776  deadZoneCenter[0]= -162.48 ;
1777  deadZoneCenter[1] = -81.8744;
1778  deadZoneCenter[2] = -21.18165;
1779  deadZoneCenter[3] = 39.51105;
1780  deadZoneCenter[4] = 100.2939;
1781  deadZoneCenter[5] = 160.58;
1782 
1783  if(localPos.y() >yBorder &&
1784  ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
1785  (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
1786  (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone) ||
1787  (localPos.y()> deadZoneCenter[3] + cutZone && localPos.y()< deadZoneCenter[4] - cutZone) ||
1788  (localPos.y()> deadZoneCenter[4] + cutZone && localPos.y()< deadZoneCenter[5] - cutZone))){
1789  pass = true;
1790  }
1791  }
1792  else if(1==ring){
1793  if(2==station){
1794  deadZoneCenter[0]= -95.80 ;
1795  deadZoneCenter[1] = -27.47;
1796  deadZoneCenter[2] = 33.67;
1797  deadZoneCenter[3] = 90.85;
1798  }
1799  else if(3==station){
1800  deadZoneCenter[0]= -89.305 ;
1801  deadZoneCenter[1] = -39.705;
1802  deadZoneCenter[2] = 20.195;
1803  deadZoneCenter[3] = 77.395;
1804  }
1805  else if(4==station){
1806  deadZoneCenter[0]= -75.645;
1807  deadZoneCenter[1] = -26.055;
1808  deadZoneCenter[2] = 23.855;
1809  deadZoneCenter[3] = 70.575;
1810  }
1811  if(localPos.y() >yBorder &&
1812  ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
1813  (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
1814  (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
1815  pass = true;
1816  }
1817  }
1818  }
1819  else if(1==station){
1820  if(3==ring){
1821  deadZoneCenter[0]= -83.155 ;
1822  deadZoneCenter[1] = -22.7401;
1823  deadZoneCenter[2] = 27.86665;
1824  deadZoneCenter[3] = 81.005;
1825  if(localPos.y() > yBorder &&
1826  ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
1827  (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
1828  (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
1829  pass = true;
1830  }
1831  }
1832  else if(2==ring){
1833  deadZoneCenter[0]= -86.285 ;
1834  deadZoneCenter[1] = -32.88305;
1835  deadZoneCenter[2] = 32.867423;
1836  deadZoneCenter[3] = 88.205;
1837  if(localPos.y() > (yBorder) &&
1838  ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
1839  (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
1840  (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
1841  pass = true;
1842  }
1843  }
1844  else{
1845  deadZoneCenter[0]= -81.0;
1846  deadZoneCenter[1] = 81.0;
1847  if(localPos.y() > (yBorder) &&
1848  (localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone )){
1849  pass = true;
1850  }
1851  }
1852  }
1853  return pass;
1854 }
1855 
1856 
1857 int CSCOfflineMonitor::typeIndex(CSCDetId id, int flag){
1858 
1859  // linearized index based on endcap, station, and ring
1860 
1861  if (flag == 1){
1862  int index = 0;
1863  if (id.station() == 1) index = id.ring();
1864  else index = id.station()*2 + id.ring();
1865  if (id.endcap() == 1) index = index + 10;
1866  if (id.endcap() == 2) index = 11 - index;
1867  return index;
1868  }
1869 
1870  else if (flag == 2){
1871  int index = 0;
1872  if (id.station() == 1 && id.ring() != 4) index = id.ring()+1;
1873  if (id.station() == 1 && id.ring() == 4) index = 1;
1874  if (id.station() != 1) index = id.station()*2 + id.ring();
1875  if (id.endcap() == 1) index = index + 10;
1876  if (id.endcap() == 2) index = 11 - index;
1877  return index;
1878  }
1879 
1880  else return 0;
1881 
1882 }
1883 
1884 int CSCOfflineMonitor::chamberSerial( CSCDetId id ) {
1885  int st = id.station();
1886  int ri = id.ring();
1887  int ch = id.chamber();
1888  int ec = id.endcap();
1889  int kSerial = ch;
1890  if (st == 1 && ri == 1) kSerial = ch;
1891  if (st == 1 && ri == 2) kSerial = ch + 36;
1892  if (st == 1 && ri == 3) kSerial = ch + 72;
1893  if (st == 1 && ri == 4) kSerial = ch;
1894  if (st == 2 && ri == 1) kSerial = ch + 108;
1895  if (st == 2 && ri == 2) kSerial = ch + 126;
1896  if (st == 3 && ri == 1) kSerial = ch + 162;
1897  if (st == 3 && ri == 2) kSerial = ch + 180;
1898  if (st == 4 && ri == 1) kSerial = ch + 216;
1899  if (st == 4 && ri == 2) kSerial = ch + 234; // from 2014
1900  if (ec == 2) kSerial = kSerial + 300;
1901  return kSerial;
1902 }
1903 
1904 void CSCOfflineMonitor::applyCSClabels( MonitorElement* me, LabelType t, AxisType a ) {
1905  if (me != nullptr)
1906  {
1907  me->setAxisTitle("Chamber #");
1908  if (t == EXTENDED)
1909  {
1910  me->setBinLabel(1,"ME -4/2",a);
1911  me->setBinLabel(2,"ME -4/1",a);
1912  me->setBinLabel(3,"ME -3/2",a);
1913  me->setBinLabel(4,"ME -3/1",a);
1914  me->setBinLabel(5,"ME -2/2",a);
1915  me->setBinLabel(6,"ME -2/1",a);
1916  me->setBinLabel(7,"ME -1/3",a);
1917  me->setBinLabel(8,"ME -1/2",a);
1918  me->setBinLabel(9,"ME -1/1b",a);
1919  me->setBinLabel(10,"ME -1/1a",a);
1920  me->setBinLabel(11,"ME +1/1a",a);
1921  me->setBinLabel(12,"ME +1/1b",a);
1922  me->setBinLabel(13,"ME +1/2",a);
1923  me->setBinLabel(14,"ME +1/3",a);
1924  me->setBinLabel(15,"ME +2/1",a);
1925  me->setBinLabel(16,"ME +2/2",a);
1926  me->setBinLabel(17,"ME +3/1",a);
1927  me->setBinLabel(18,"ME +3/2",a);
1928  me->setBinLabel(19,"ME +4/1",a);
1929  me->setBinLabel(20,"ME +4/2",a);
1930  }
1931  else if (t == SMALL)
1932  {
1933  me->setBinLabel(1,"ME -4/1",a);
1934  me->setBinLabel(2,"ME -3/2",a);
1935  me->setBinLabel(3,"ME -3/1",a);
1936  me->setBinLabel(4,"ME -2/2",a);
1937  me->setBinLabel(5,"ME -2/1",a);
1938  me->setBinLabel(6,"ME -1/3",a);
1939  me->setBinLabel(7,"ME -1/2",a);
1940  me->setBinLabel(8,"ME -1/1b",a);
1941  me->setBinLabel(9,"ME -1/1a",a);
1942  me->setBinLabel(10,"ME +1/1a",a);
1943  me->setBinLabel(11,"ME +1/1b",a);
1944  me->setBinLabel(12,"ME +1/2",a);
1945  me->setBinLabel(13,"ME +1/3",a);
1946  me->setBinLabel(14,"ME +2/1",a);
1947  me->setBinLabel(15,"ME +2/2",a);
1948  me->setBinLabel(16,"ME +3/1",a);
1949  me->setBinLabel(17,"ME +3/2",a);
1950  me->setBinLabel(18,"ME +4/1",a);
1951  }
1952  }
1953 }
1954 
1955 DEFINE_FWK_MODULE(CSCOfflineMonitor);
CSCTMBHeader::BXNCount
uint16_t BXNCount() const
Definition: CSCTMBHeader.h:42
CSCDCCEventData
01/20/05 A.Tumanov
Definition: CSCDCCEventData.h:13
delta
dbl * delta
Definition: mlp_gen.cc:36
CSCDetId::chamber
int chamber() const
Definition: CSCDetId.h:68
edm::ParameterSet::getParameter
T getParameter(std::string const &) const
CSCDCCExaminer::crcCFEB
void crcCFEB(bool enable)
Definition: CSCDCCExaminer.cc:47
benchmark_cfg.errors
errors
Definition: benchmark_cfg.py:136
muonCSCDigis_cfi.wires
wires
Definition: muonCSCDigis_cfi.py:57
CSCOfflineMonitor::chamberSerial
int chamberSerial(CSCDetId id)
Definition: CSCOfflineMonitor.cc:1884
mps_fire.i
i
Definition: mps_fire.py:269
CSCSegment::localDirection
LocalVector localDirection() const override
Local direction.
Definition: CSCSegment.h:41
CSCOfflineMonitor::bookHistograms
void bookHistograms(DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override
Definition: CSCOfflineMonitor.cc:26
TrapezoidalPlaneBounds::parameters
virtual const std::array< const float, 4 > parameters() const
Definition: TrapezoidalPlaneBounds.cc:62
edm::Event::getByToken
bool getByToken(EDGetToken token, Handle< PROD > &result) const
Definition: Event.h:519
CSCChamber::id
CSCDetId id() const
Get the (concrete) DetId.
Definition: CSCChamber.h:37
RecoTauPiZeroBuilderPlugins_cfi.strips
strips
Definition: RecoTauPiZeroBuilderPlugins_cfi.py:34
CSCOfflineMonitor::doResolution
void doResolution(edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
Definition: CSCOfflineMonitor.cc:1078
DEFINE_FWK_MODULE
#define DEFINE_FWK_MODULE(type)
Definition: MakerMacros.h:17
slope
static const double slope[3]
Definition: CastorTimeSlew.cc:6
hiPixelPairStep_cff.points
points
Definition: hiPixelPairStep_cff.py:88
CSCCrateMap::detId
CSCDetId detId(int vme, int dmb, int cfeb, int layer=0) const
Definition: CSCCrateMap.cc:11
GeomDet::toGlobal
GlobalPoint toGlobal(const Local2DPoint &lp) const
Conversion to the global R.F. from the R.F. of the GeomDet.
Definition: GeomDet.h:54
PV3DBase::phi
Geom::Phi< T > phi() const
Definition: PV3DBase.h:69
CSCDCCEventData::dduData
const std::vector< CSCDDUEventData > & dduData() const
accessor to dduData
Definition: CSCDCCEventData.h:25
PV3DBase::y
T y() const
Definition: PV3DBase.h:63
X
#define X(str)
Definition: MuonsGrabber.cc:48
MonitorElement::setBinLabel
void setBinLabel(int bin, const std::string &label, int axis=1)
set bin label for x, y or z axis (axis=1, 2, 3 respectively)
Definition: MonitorElement.cc:942
muonDTDigis_cfi.pset
pset
Definition: muonDTDigis_cfi.py:27
GeomDet::toLocal
LocalPoint toLocal(const GlobalPoint &gp) const
Conversion to the R.F. of the GeomDet.
Definition: GeomDet.h:69
weight
Definition: weight.py:1
CSCOfflineMonitor::getSignal
float getSignal(const CSCStripDigiCollection &stripdigis, CSCDetId idRH, int centerStrip)
Definition: CSCOfflineMonitor.cc:1177
CSCGeometry::chambers
const ChamberContainer & chambers() const
Return a vector of all chambers.
Definition: CSCGeometry.cc:106
MillePedeFileConverter_cfg.e
e
Definition: MillePedeFileConverter_cfg.py:37
CSCDCCExaminer::errors
ExaminerStatusType errors(void) const
Definition: CSCDCCExaminer.h:167
CSCDCCExaminer::crcALCT
void crcALCT(bool enable)
Definition: CSCDCCExaminer.cc:29
CSCDetId::layer
int layer() const
Definition: CSCDetId.h:61
CSCOfflineMonitor::analyze
void analyze(const edm::Event &event, const edm::EventSetup &eventSetup) override
Definition: CSCOfflineMonitor.cc:564
FEDRawData::size
size_t size() const
Lenght of the data buffer in bytes.
Definition: FEDRawData.h:47
res
Definition: Electron.h:6
PV3DBase::theta
Geom::Theta< T > theta() const
Definition: PV3DBase.h:75
CSCOfflineMonitor::CSCOfflineMonitor
CSCOfflineMonitor(const edm::ParameterSet &pset)
Definition: CSCOfflineMonitor.cc:13
CSCChamberSpecs::chamberTypeName
std::string chamberTypeName() const
Definition: CSCChamberSpecs.cc:125
DetId::rawId
uint32_t rawId() const
get the raw id
Definition: DetId.h:44
CSCDetId::endcap
int endcap() const
Definition: CSCDetId.h:93
electronIdCutBased_cfi.threshold
threshold
Definition: electronIdCutBased_cfi.py:6
RecoEcal_EventContent_cff.ec
ec
Definition: RecoEcal_EventContent_cff.py:111
FEDRawDataCollection::FEDData
const FEDRawData & FEDData(int fedid) const
retrieve data for fed
Definition: FEDRawDataCollection.cc:28
CSCChamber::specs
const CSCChamberSpecs * specs() const
Definition: CSCChamber.h:42
CSCOfflineMonitor::typeIndex
int typeIndex(CSCDetId id, int flag=1)
Definition: CSCOfflineMonitor.cc:1857
CSCOfflineMonitor::fitX
float fitX(const CLHEP::HepMatrix &sp, const CLHEP::HepMatrix &ep)
Definition: CSCOfflineMonitor.cc:1142
triggerObjects_cff.id
id
Definition: triggerObjects_cff.py:28
mathSSE::sqrt
T sqrt(T t)
Definition: SSEVec.h:18
PV3DBase::z
T z() const
Definition: PV3DBase.h:64
CSCDCCExaminer::crcTMB
void crcTMB(bool enable)
Definition: CSCDCCExaminer.cc:38
DQMStore::IBooker::book1D
MonitorElement * book1D(Args &&...args)
Definition: DQMStore.h:118
funct::abs
Abs< T >::type abs(const T &t)
Definition: Abs.h:22
CSCSegment::localPosition
LocalPoint localPosition() const override
Definition: CSCSegment.h:38
CSCChamber::layer
const CSCLayer * layer(CSCDetId id) const
Return the layer corresponding to the given id.
Definition: CSCChamber.cc:39
ChiSquaredProbability
float ChiSquaredProbability(double chiSquared, double nrDOF)
Definition: ChiSquaredProbability.cc:13
cscSegments_cfi.cscSegments
cscSegments
Definition: cscSegments_cfi.py:9
kLayer
static const std::string kLayer("layer")
SMALL
static const double SMALL
Definition: herwig.h:292
LogTrace
#define LogTrace(id)
Definition: MessageLogger.h:504
CSCTMBHeader::ALCTMatchTime
uint16_t ALCTMatchTime() const
Definition: CSCTMBHeader.h:45
stringResolutionProvider_cfi.bin
bin
set the eta bin as selection string.
Definition: stringResolutionProvider_cfi.py:11
CSCGeometry::gangedStrips
bool gangedStrips() const
Definition: CSCGeometry.h:111
CSCDetId::ring
int ring() const
Definition: CSCDetId.h:75
CSCOfflineMonitor::doSegments
void doSegments(edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
Definition: CSCOfflineMonitor.cc:956
DQMStore::IBooker::setCurrentFolder
void setCurrentFolder(const std::string &fullpath)
Definition: DQMStore.cc:279
CSCOfflineMonitor::doWireDigis
void doWireDigis(edm::Handle< CSCWireDigiCollection > wires)
Definition: CSCOfflineMonitor.cc:764
DQMStore::IBooker::book2D
MonitorElement * book2D(Args &&...args)
Definition: DQMStore.h:136
edm::EventSetup::get
const T & get() const
Definition: EventSetup.h:59
CSCGeometry::chamber
const CSCChamber * chamber(CSCDetId id) const
Return the chamber corresponding to given DetId.
Definition: CSCGeometry.cc:118
parallelization.uint
def uint(string)
Definition: parallelization.py:49
MuonDigiCollection< CSCDetId, CSCCLCTDigi >::const_iterator
std::vector< CSCCLCTDigi >::const_iterator const_iterator
Definition: MuonDigiCollection.h:110
CSCOfflineMonitor::withinSensitiveRegion
bool withinSensitiveRegion(LocalPoint localPos, const std::array< const float, 4 > &layerBounds, int station, int ring, float shiftFromEdge, float shiftFromDeadZone)
Definition: CSCOfflineMonitor.cc:1756
CSCOfflineMonitor::doBXMonitor
void doBXMonitor(edm::Handle< CSCALCTDigiCollection > alcts, edm::Handle< CSCCLCTDigiCollection > clcts, const edm::Event &event, const edm::EventSetup &eventSetup)
Definition: CSCOfflineMonitor.cc:1547
CSCDCCExaminer::check
int32_t check(const uint16_t *&buffer, int32_t length)
Definition: CSCDCCExaminer.cc:267
CSCGeometry::ChamberContainer
std::vector< const CSCChamber * > ChamberContainer
Definition: CSCGeometry.h:32
data
char data[epos_bytes_allocation]
Definition: EPOS_Wrapper.h:82
reco::if
if(dp >Float(M_PI)) dp-
a
double a
Definition: hdecay.h:121
CSCGeometry::layer
const CSCLayer * layer(CSCDetId id) const
Return the layer corresponding to given DetId.
Definition: CSCGeometry.cc:124
edm::OwnVector::const_iterator
Definition: OwnVector.h:41
CSCOfflineMonitor::doStripDigis
void doStripDigis(edm::Handle< CSCStripDigiCollection > strips)
Definition: CSCOfflineMonitor.cc:794
FEDRawData::data
const unsigned char * data() const
Return a const pointer to the beginning of the data buffer.
Definition: FEDRawData.cc:28
CSCOfflineMonitor::doPedestalNoise
void doPedestalNoise(edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
Definition: CSCOfflineMonitor.cc:835
CSCDetId::station
int station() const
Definition: CSCDetId.h:86
MuonDigiCollection< CSCDetId, CSCCLCTDigi >::Range
std::pair< const_iterator, const_iterator > Range
Definition: MuonDigiCollection.h:111
errors
Definition: errors.py:1
trackerTree.check
def check(config)
Definition: trackerTree.py:14
mps_merge.weight
weight
Definition: mps_merge.py:86
CSCOfflineMonitor::doEfficiencies
void doEfficiencies(edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
Definition: CSCOfflineMonitor.cc:1246
PV3DBase::x
T x() const
Definition: PV3DBase.h:62
CSCOfflineMonitor::doOccupancies
void doOccupancies(edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::Handle< CSCCLCTDigiCollection > clcts)
Definition: CSCOfflineMonitor.cc:604
MonitorElement::setAxisTitle
void setAxisTitle(const std::string &title, int axis=1)
set x-, y- or z-axis title (axis=1, 2, 3 respectively)
Definition: MonitorElement.cc:973
edm::ESHandle::product
T const * product() const
Definition: ESHandle.h:86
CSCLayer::geometry
const CSCLayerGeometry * geometry() const
Definition: CSCLayer.h:47
CSCDCCExaminer::setMask
void setMask(ExaminerMaskType mask)
Definition: CSCDCCExaminer.h:164
event
Definition: event.py:1
edm::Run
Definition: Run.h:43
CSCOfflineMonitor::doRecHits
void doRecHits(edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
Definition: CSCOfflineMonitor.cc:878
CSCOfflineMonitor::applyCSClabels
void applyCSClabels(MonitorElement *meHisto, LabelType t, AxisType a)
Definition: CSCOfflineMonitor.cc:1904
Generated for CMSSW Reference Manual by doxygen 1.8.11